- 29 Mar, 2020 2 commits
-
-
Lang Cheng authored
Just reduce the default number to 64 for backward compatibility, the driver can still get this configuration from the firmware. Link: https://lore.kernel.org/r/1585194018-4381-3-git-send-email-liweihang@huawei.comSigned-off-by:
Lang Cheng <chenglang@huawei.com> Signed-off-by:
Weihang Li <liweihang@huawei.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Jihua Tao authored
The original value means sending 16 packets at a time, and it should be configured to 0 which means sending 1 packet instead. It is modified to reduce the number of PFC frames to make sure the performance meets expectations when flow control is enabled on hip08. Link: https://lore.kernel.org/r/1585194018-4381-2-git-send-email-liweihang@huawei.comSigned-off-by:
Jihua Tao <taojihua4@huawei.com> Signed-off-by:
-
- 27 Mar, 2020 11 commits
-
-
Jason Gunthorpe authored
Leon Romanovsky says: ==================== Those two patches from Michael extends mlx5_core and mlx5_ib flow steering to support RDMA TX in similar way to already supported RDMA RX. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Due to dependencies * branch 'mlx5_tx_steering': RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering
-
Michael Guralnik authored
Enable user application to add rules for RDMA TX steering table. Rules in this steering table will allow to steer transmitted RDMA traffic. Link: https://lore.kernel.org/r/20200324061425.1570190-3-leon@kernel.orgSigned-off-by:
Michael Guralnik <michaelgur@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Michael Guralnik authored
Add new RDMA TX flow steering namespace. Flow steering rules in this namespace are used to filter transmitted RDMA traffic. Link: https://lore.kernel.org/r/20200324061425.1570190-2-leon@kernel.orgSigned-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Kaike Wan authored
When kobject_init_and_add() returns an error in the function hfi1_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Kaike Wan authored
When the hfi1 driver is unloaded, kmemleak will report the following issue: unreferenced object 0xffff8888461a4c08 (size 8): comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s) hex dump (first 8 bytes): 73 64 6d 61 30 00 ff ff sdma0... backtrace: [<00000000311a6ef5>] kvasprintf+0x62/0xd0 [<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90 [<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0 [<00000000346fe72b>] 0xffffffffa0c5ecba [<000000006cfc5819>] 0xffffffffa0c866b9 [<0000000031c65580>] 0xffffffffa0c38e87 [<00000000e9739b3f>] local_pci_probe+0x41/0x80 [<000000006c69911d>] work_for_cpu_fn+0x16/0x20 [<00000000601267b5>] process_one_work+0x171/0x380 [<0000000049a0eefa>] worker_thread+0x1d1/0x3f0 [<00000000909cf2b9>] kthread+0xf8/0x130 [<0000000058f5f874>] ret_from_fork+0x35/0x40 This patch fixes the issue by: - Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs(). - This will fix the memory leak. - Calling kobject_put() to unwind operations only for those entries in dd->per_sdma[] whose operations have succeeded (including the current one that has just failed) in hfi1_verbs_register_sysfs(). Cc: <stable@vger.kernel.org> Fixes: 0cb2aa69 ("IB/hfi1: Add sysfs interface for affinity setup") Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.comReviewed-by:
-
Yishai Hadas authored
Move to fully dynamic UAR mode once user space supports it. In this case we prevent any legacy mode of UARs on the allocated context and prevent redundant allocation of the static ones. Link: https://lore.kernel.org/r/20200324060143.1569116-6-leon@kernel.orgSigned-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
-
Leon Romanovsky authored
struct mlx5_bfreg_info is used by mlx5_ib only but is exposed to both RDMA and netdev parts of mlx5 driver. Move that struct to mlx5_ib namespace, clean vertical space alignment and convert lib_uar_4k from bool to bitfield. Link: https://lore.kernel.org/r/20200324060143.1569116-5-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Extend QP creation to get uar page index from user space, this mode can be used with the UAR dynamic mode APIs to allocate/destroy a UAR object. As part of enabling this option blocked the weird/un-supported cross channel option which uses index 0 hard-coded. This QP flag wasn't exposed to user space as part of any formal upstream release, the dynamic option can allow having valid UAR page index instead. Link: https://lore.kernel.org/r/20200324060143.1569116-4-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Extend CQ creation to get uar page index from user space, this mode can be used with the UAR dynamic mode APIs to allocate/destroy a UAR object. Link: https://lore.kernel.org/r/20200324060143.1569116-3-leon@kernel.orgSigned-off-by:
-
Yishai Hadas authored
Expose UAR object and its alloc/destroy commands to be used over the ioctl interface by user space applications. This API supports both BF & NC modes and enables a dynamic allocation of UARs once really needed. As the number of driver objects were limited by the core ones when the merged tree is prepared, had to decrease the number of core objects to enable the new UAR object usage. Link: https://lore.kernel.org/r/20200324060143.1569116-2-leon@kernel.orgSigned-off-by:
-
Mauro Carvalho Chehab authored
The right markup for a variable is @foo, and not @foo[]. Using a wrong markup caused this warning: ./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:243: WARNING: Inline strong start-string without end-string. Link: https://lore.kernel.org/r/9dce702510505556d75a13d9641e09218a4b4a65.1584456635.git.mchehab+huawei@kernel.orgSigned-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
- 26 Mar, 2020 14 commits
-
-
Weihang Li authored
Type of qp has been checked in check_send_valid(), so this judgment should be removed. Link: https://lore.kernel.org/r/1584674622-52773-11-git-send-email-liweihang@huawei.comSigned-off-by:
-
Weihang Li authored
The field smac in ib_wc was used for create AH and then it will be treated as destination mac address in UD sqwqe, but related code about filling smac into AH has been removed in core. Actually, the dmac in UD sqwqe is parsed from the dgid in grh which is passed in by ULP now, so this assignment should be removed. Link: https://lore.kernel.org/r/1584674622-52773-10-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
Before calling modify_qp_reset_to_init(), the entire qpc mask has been cleared, so it is no longer necessary to clear the specific fields in the mask. Link: https://lore.kernel.org/r/1584674622-52773-9-git-send-email-liweihang@huawei.comSigned-off-by:
-
Wenpeng Liang authored
ceq and aeq is a ring buffer, consumer index of them will be set to zero after reaching the maximum value. The warning should be removed or it may mislead the users. Link: https://lore.kernel.org/r/1584674622-52773-8-git-send-email-liweihang@huawei.comSigned-off-by:
Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by:
-
Lang Cheng authored
The struct hns_roce_v2_cq_db is unused, it should be removed. Link: https://lore.kernel.org/r/1584674622-52773-7-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lang Cheng authored
Interchange SQD and SQE to match the protocol. Link: https://lore.kernel.org/r/1584674622-52773-6-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lijun Ou authored
The capbilities of hardware should be got at first and then used in hns_roce_alloc_vf_resource(). Also removes an unnecessary if ... else condition in it. Link: https://lore.kernel.org/r/1584674622-52773-5-git-send-email-liweihang@huawei.comSigned-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lang Cheng authored
Combine attribute flags before masking them. Link: https://lore.kernel.org/r/1584674622-52773-4-git-send-email-liweihang@huawei.comSigned-off-by:
-
Weihang Li authored
hns_roce_alloc_mtt_range() never return -1, ret should be checked whether it is zero instead of -1. Fixes: 1ceb0b11 ("RDMA/hns: Fix non-standard error codes") Link: https://lore.kernel.org/r/1584674622-52773-3-git-send-email-liweihang@huawei.comSigned-off-by:
-
Lijun Ou authored
Use ibdev_err/dbg/warn() instead of dev_err/dbg/warn(), and modify some prints into format of "failed to do something, ret = n". Link: https://lore.kernel.org/r/1584674622-52773-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Sergey Gorenko authored
libiscsi calls the check_protection transport handler only if SCSI-Respose is received. So, the handler is never called if iSCSI task is completed for some other reason like a timeout or error handling. And this behavior looks correct. But the iSER does not handle this case properly because it puts a non-checked signature MR to the free pool. Then the error occurs at reusing the MR because it is not allowed to invalidate a signature MR without checking. This commit adds an extra check to iser_unreg_mem_fastreg(), which is a part of the task cleanup flow. Now the signature MR is checked there if it is needed. Link: https://lore.kernel.org/r/20200325151210.1548-1-sergeygo@mellanox.comSigned-off-by:
Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Zhu Yanjun authored
The RXE driver doesn't set sys_image_guid and user space applications see zeros. This causes to pyverbs tests to fail with the following traceback, because the IBTA spec requires to have valid sys_image_guid. Traceback (most recent call last): File "./tests/test_device.py", line 51, in test_query_device self.verify_device_attr(attr) File "./tests/test_device.py", line 74, in verify_device_attr assert attr.sys_image_guid != 0 In order to fix it, set sys_image_guid to be equal to node_guid. Before: 5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid 0000:0000:0000:0000 After: 5: rxe0: ... node_guid 5054:00ff:feaa:5363 sys_image_guid 5054:00ff:feaa:5363 Fixes: 8700e3e7 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200323112800.1444784-1-leon@kernel.orgSigned-off-by:Zhu Yanjun <yanjunz@mellanox.com> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Link: https://lore.kernel.org/r/20200319154641.23711-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Avihai Horon authored
After a successful allocation of path_rec, num_paths is set to 1, but any error after such allocation will leave num_paths uncleared. This causes to de-referencing a NULL pointer later on. Hence, num_paths needs to be set back to 0 if such an error occurs. The following crash from syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0 Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6 14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffff88006586f980 EFLAGS: 00010207 RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475 RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72 R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30 R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200 FS: 00000000016fc880(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_copy_path_rec_from_user+0xcc0/0xcc0 ? __mutex_unlock_slowpath+0xfc/0x670 ? wait_for_completion+0x3b0/0x3b0 ? ucma_query_route+0x818/0xc60 ucma_query_route+0x818/0xc60 ? ucma_listen+0x1b0/0x1b0 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 ? ucma_listen+0x1b0/0x1b0 ? ucma_write+0x292/0x460 ucma_write+0x292/0x460 ? ucma_close_id+0x60/0x60 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 __vfs_write+0xf7/0x620 ? ucma_close_id+0x60/0x60 ? kernel_read+0x110/0x110 ? time_hardirqs_on+0x19/0x580 ? lock_acquire+0x18b/0x3a0 ? finish_task_switch+0xf3/0x5d0 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1be/0x5d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? security_file_permission+0x172/0x1e0 vfs_write+0x192/0x460 ksys_write+0xc6/0x1a0 ? __ia32_sys_read+0xb0/0xb0 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe ? do_syscall_64+0x1d/0x470 do_syscall_64+0x9e/0x470 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3c86aa70 ("RDMA/cm: Add RDMA CM support for IBoE devices") Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.orgSigned-off-by:
Avihai Horon <avihaih@mellanox.com> Reviewed-by:
-
- 24 Mar, 2020 6 commits
-
-
Yishai Hadas authored
Now that we have direct and reliable detection of WC support by the system, use is broadly. The only case we have to worry about is when the WC autodetector cannot run. For this fringe case generally assume that that WC is available, except in the well defined case of no PAT support on x86 which is tested by calling arch_can_pci_mmap_wc(). If WC is wrongly assumed to be available then it causes a small performance hit on paths in userspace that are tuned to the assumption that WC is available. There is no functional loss. It is very unlikely that any platforms exist that lack WC and also care about the micro optimization of WC in the fringe case where autodetection does not work. By removing the fairly bogus CONFIG tests this makes WC work broadly on all arches and all platforms. Link: https://lore.kernel.org/r/20200318100323.46659-1-leon@kernel.orgSigned-off-by:
-
Xi Wang authored
Optimizes hns_roce_table_mhop_get() by encapsulating code about clearing hem into clear_mhop_hem(), which will make the code flow clearer. Link: https://lore.kernel.org/r/1584417324-2255-3-git-send-email-liweihang@huawei.comSigned-off-by:
Xi Wang <wangxi11@huawei.com> Signed-off-by:
-
Xi Wang authored
Splits hns_roce_table_mhop_get() into 4 sub-functions to make the code flow clearer. Link: https://lore.kernel.org/r/1584417324-2255-2-git-send-email-liweihang@huawei.comSigned-off-by:
-
Selvin Xavier authored
Destroy CQ command to firmware returns the num_cnq_events as a response. This indicates the driver about the number of CQ events generated for this CQ. Driver should wait for all these events before freeing the CQ host structures. Also, add routine to clean all the pending notification for the CQs getting destroyed. This avoids the possibility of accessing the CQ data structures after its freed. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Link: https://lore.kernel.org/r/1584120842-3200-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
Dan Carpenter authored
The kzalloc() function returns NULL, not error pointers. Fixes: 30f2fe40 ("IB/mlx5: Introduce UAPIs to manage packet pacing") Link: https://lore.kernel.org/r/20200320132641.GF95012@mwandaSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Andrew Morton authored
drivers/infiniband/sw/siw/siw_qp_rx.c: In function siw_proc_send: ./include/linux/spinlock.h:288:3: warning: flags may be used uninitialized in this function [-Wmaybe-uninitialized] _raw_spin_unlock_irqrestore(lock, flags); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/sw/siw/siw_qp_rx.c:335:16: note: flags was declared here unsigned long flags; Link: https://lore.kernel.org/r/20200323184627.ZWPg91uin%akpm@linux-foundation.orgSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
-
- 19 Mar, 2020 1 commit
-
-
Leon Romanovsky authored
Remove custom and duplicated variant of offsetofend(). Link: https://lore.kernel.org/r/20200310091438.248429-4-leon@kernel.orgSigned-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
- 18 Mar, 2020 6 commits
-
-
Kaike Wan authored
The field kobj was added to hfi1_devdata structure to manage the life time of the hfi1_devdata structure for PSM accesses: commit e11ffbd5 ("IB/hfi1: Do not free hfi1 cdev parent structure early") Later another mechanism user_refcount/user_comp was introduced to provide the same functionality: commit acd7c8fe ("IB/hfi1: Fix an Oops on pci device force remove") This patch will remove this kobj field, as it is no longer needed. Link: https://lore.kernel.org/r/20200316210500.7753.4145.stgit@awfm-01.aw.intel.comReviewed-by:
-
Mike Marciniszyn authored
This routine was obsoleted by the patch below. Delete it. Fixes: a2a074ef ("RDMA: Handle ucontext allocations by IB/core") Link: https://lore.kernel.org/r/20200316210454.7753.94689.stgit@awfm-01.aw.intel.comReviewed-by:
-
Lang Cheng authored
Depth of qp shouldn't be allowed to be set to zero, after ensuring that, subsequent process can be simplified. And when qp is changed from reset to reset, the capability of minimum qp depth was used to identify hardware of hip06, it should be changed into a more readable form. Link: https://lore.kernel.org/r/1584006624-11846-1-git-send-email-liweihang@huawei.comSigned-off-by:
-
Sindhu, Devale authored
The driver uses a hard-coded value for FW version and reports an inconsistent FW version between ibv_devinfo and /sys/class/infiniband/i40iw/fw_ver. Retrieve the FW version via a Control QP (CQP) operation and report it consistently across sysfs and query device. Fixes: d3749841 ("i40iw: add files for iwarp interface") Link: https://lore.kernel.org/r/20200313214406.2159-1-shiraz.saleem@intel.comReported-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Sindhu, Devale <sindhu.devale@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Xi Wang authored
Splits hns_roce_v2_post_send() into three sub-functions: set_rc_wqe(), set_ud_wqe() and update_sq_db() to simplify the code. Link: https://lore.kernel.org/r/1583839084-31579-6-git-send-email-liweihang@huawei.comSigned-off-by:
-
Xi Wang authored
Currently, before the qp is created, a page size needs to be calculated for the base address table to store all base addresses in the mtr. As a result, the parameter configuration of the mtr is complex. So integrate the process of calculating the base table page size into the hem related interface to simplify the process of using mtr. Link: https://lore.kernel.org/r/1583839084-31579-5-git-send-email-liweihang@huawei.comSigned-off-by:
-
