- 14 Oct, 2020 40 commits
-
-
Hui Su authored
fix comments for isolate_lru_page(): s/fundamentnal/fundamental Signed-off-by:
Hui Su <sh_def@163.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chunxin Zang authored
We have observed that drop_caches can take a considerable amount of time (<put data here>). Especially when there are many memcgs involved because they are adding an additional overhead. It is quite unfortunate that the operation cannot be interrupted by a signal currently. Add a check for fatal signals into the main loop so that userspace can control early bailout. There are two reasons: 1. We have too many memcgs, even though one object freed in one memcg, the sum of object is bigger than 10. 2. We spend a lot of time in traverse memcg once. So, the memcg who traversed at the first have been freed many objects. Traverse memcg next time, the freed count bigger than 10 again. We can get the following info through 'ps': root:~# ps -aux | grep drop root 357956 ... R Aug25 21119854:55 echo 3 > /proc/sys/vm/drop_caches root 1771385 ... R Aug16 21146421:17 echo 3 > /proc/sys/vm/drop_caches root 1986319 ... R 18:56 117:27 echo 3 > /proc/sys/vm/drop_caches root 2002148 ... R Aug24 5720:39 echo 3 > /proc/sys/vm/drop_caches root 2564666 ... R 18:59 113:58 echo 3 > /proc/sys/vm/drop_caches root 2639347 ... R Sep03 2383:39 echo 3 > /proc/sys/vm/drop_caches root 3904747 ... R 03:35 993:31 echo 3 > /proc/sys/vm/drop_caches root 4016780 ... R Aug21 7882:18 echo 3 > /proc/sys/vm/drop_caches Use bpftrace follow 'freed' value in drop_slab_node: root:~# bpftrace -e 'kprobe:drop_slab_node+70 {@ret=hist(reg("bp")); }' Attaching 1 probe... ^B^C @ret: [64, 128) 1 | | [128, 256) 28 | | [256, 512) 107 |@ | [512, 1K) 298 |@@@ | [1K, 2K) 613 |@@@@@@@ | [2K, 4K) 4435 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@| [4K, 8K) 442 |@@@@@ | [8K, 16K) 299 |@@@ | [16K, 32K) 100 |@ | [32K, 64K) 139 |@ | [64K, 128K) 56 | | [128K, 256K) 26 | | [256K, 512K) 2 | | In the while loop, we can check whether the TASK_KILLABLE signal is set, if so, we should break the loop. Signed-off-by:Chunxin Zang <zangchunxin@bytedance.com> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Chris Down <chris@chrisdown.name> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Link: https://lkml.kernel.org/r/20200909152047.27905-1-zangchunxin@bytedance.comSigned-off-by:
-
Mike Kravetz authored
As a debugging aid, huge_pmd_share should make sure i_mmap_rwsem is held if necessary. To clarify the 'if necessary', expand the comment block at the beginning of huge_pmd_share. No functional change. The added i_mmap_assert_locked() call is only enabled if CONFIG_LOCKDEP. Ideally, this should have been included with commit 34ae204f ("hugetlbfs: remove call to huge_pte_alloc without i_mmap_rwsem"). Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Wei Yang authored
Function dequeue_huge_page_node_exact() iterates the free list and return the first valid free hpage. Instead of break and check the loop variant, we could return in the loop directly. This could reduce some redundant check. [mike.kravetz@oracle.com: points out a logic error] [richard.weiyang@linux.alibaba.com: v4] Link: https://lkml.kernel.org/r/20200901014636.29737-8-richard.weiyang@linux.alibaba.comSigned-off-by:
Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by:
-
Wei Yang authored
set_hugetlb_cgroup_[rsvd] just manipulate page local data, which is not necessary to be protected by hugetlb_lock. Let's take this out. Signed-off-by:
Baoquan He <bhe@redhat.com> Reviewed-by:
-
Wei Yang authored
The page allocated from buddy is not on any list, so just use list_add() is enough. Signed-off-by:
-
Wei Yang authored
There are only two cases of function add_reservation_in_range() * count file_region and return the number in regions_needed * do the real list operation without counting This means it is not necessary to have two parameters to classify these two cases. Just use regions_needed to separate them. Signed-off-by: -
Wei Yang authored
Instead of add allocated file_region one by one to region_cache, we could use list_splice to merge two list at once. Also we know the number of entries in the list, increase the number directly. Signed-off-by:
-
Wei Yang authored
We are sure to get a valid file_region, otherwise the VM_BUG_ON(resv->region_cache_count <= 0) at the very beginning would be triggered. Let's remove the redundant one. Signed-off-by:
-
Wei Yang authored
Patch series "mm/hugetlb: code refine and simplification", v4. Following are some cleanups for hugetlb. Simple testing with tools/testing/selftests/vm/map_hugetlb passes. This patch (of 7): Per my understanding, we keep the regions ordered and would always coalesce regions properly. So the task to keep this property is just to coalesce its neighbour. Let's simplify this. Signed-off-by:
-
Baoquan He authored
Change 'pecify' to 'Specify'. Signed-off-by:
David Hildenbrand <david@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lkml.kernel.org/r/20200723032248.24772-4-bhe@redhat.comSigned-off-by:
-
Baoquan He authored
If a swap entry tests positive for either is_[migration|hwpoison]_entry(), then its swap_type() is among SWP_MIGRATION_READ, SWP_MIGRATION_WRITE and SWP_HWPOISON. All these types >= MAX_SWAPFILES, exactly what is asserted with non_swap_entry(). So the checking non_swap_entry() in is_hugetlb_entry_migration() and is_hugetlb_entry_hwpoisoned() is redundant. Let's remove it to optimize code. Signed-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lkml.kernel.org/r/20200723032248.24772-3-bhe@redhat.comSigned-off-by:
-
Baoquan He authored
Patch series "mm/hugetlb: Small cleanup and improvement", v2. This patch (of 3): Just like its neighbour is_hugetlb_entry_migration() has done. Signed-off-by:
-
Michal Hocko authored
There is a general understanding that GFP_ATOMIC/GFP_NOWAIT are to be used from atomic contexts. E.g. from within a spin lock or from the IRQ context. This is correct but there are some atomic contexts where the above doesn't hold. One of them would be an NMI context. Page allocator has never supported that and the general fear of this context didn't let anybody to actually even try to use the allocator there. Good, but let's be more specific about that. Another such a context, and that is where people seem to be more daring, is raw_spin_lock. Mostly because it simply resembles regular spin lock which is supported by the allocator and there is not any implementation difference with !RT kernels in the first place. Be explicit that such a context is not supported by the allocator. The underlying reason is that zone->lock would have to become raw_spin_lock as well and that has turned out to be a problem for RT (http://lkml.kernel.org/r/87mu305c1w.fsf@nanos.tec.linutronix.de). Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Uladzislau Rezki <urezki@gmail.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20200929123010.5137-1-mhocko@kernel.orgSigned-off-by:
-
Matthew Wilcox (Oracle) authored
Here is a very rare race which leaks memory: Page P0 is allocated to the page cache. Page P1 is free. Thread A Thread B Thread C find_get_entry(): xas_load() returns P0 Removes P0 from page cache P0 finds its buddy P1 alloc_pages(GFP_KERNEL, 1) returns P0 P0 has refcount 1 page_cache_get_speculative(P0) P0 has refcount 2 __free_pages(P0) P0 has refcount 1 put_page(P0) P1 is not freed Fix this by freeing all the pages in __free_pages() that won't be freed by the call to put_page(). It's usually not a good idea to split a page, but this is a very unlikely scenario. Fixes: e286781d ("mm: speculative page references") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Nick Piggin <npiggin@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200926213919.26642-1-willy@infradead.orgSigned-off-by:
-
Ralph Campbell authored
The function is_huge_zero_page() doesn't call compound_head() to make sure the page pointer is a head page. The call to is_huge_zero_page() in release_pages() is made before compound_head() is called so the test would fail if release_pages() was called with a tail page of the huge_zero_page and put_page_testzero() would be called releasing the page. This is unlikely to be happening in normal use or we would be seeing all sorts of process data corruption when accessing a THP zero page. Looking at other places where is_huge_zero_page() is called, all seem to only pass a head page so I think the right solution is to move the call to compound_head() in release_pages() to a point before calling is_huge_zero_page(). Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
-
Mateusz Nosek authored
Previously 'for_next_zone_zonelist_nodemask' macro parameter 'zlist' was unused so this patch removes it. Signed-off-by:
Mateusz Nosek <mateusznosek0@gmail.com> Signed-off-by:
-
Yanfei Xu authored
__perform_reclaim()'s single caller expects it to return 'unsigned long', hence change its return value and a local variable to 'unsigned long'. Suggested-by:
Yanfei Xu <yanfei.xu@windriver.com> Signed-off-by:
-
Mateusz Nosek authored
finalise_ac() is just 'epilogue' for 'prepare_alloc_pages'. Therefore there is no need to keep them both so 'finalise_ac' content can be merged into prepare_alloc_pages() code. It would make __alloc_pages_nodemask() cleaner when it comes to readability. Signed-off-by:
-
Mateusz Nosek authored
Previously in '__init early_init_on_alloc' and '__init early_init_on_free' the return values from 'kstrtobool' were not handled properly. That caused potential garbage value read from variable 'bool_result'. Introduced patch fixes error handling. Signed-off-by:
-
Mateusz Nosek authored
Previously flags check was separated into two separated checks with two separated branches. In case of presence of any of two mentioned flags, the same effect on flow occurs. Therefore checks can be merged and one branch can be avoided. Signed-off-by:
-
Mateusz Nosek authored
Previously variable 'tmp' was initialized, but was not read later before reassigning. So the initialization can be removed. [akpm@linux-foundation.org: remove `tmp' altogether] Signed-off-by:
-
Li Xinhai authored
In has_unmovable_pages(), the page parameter would not always be the first page within a pageblock (see how the page pointer is passed in from start_isolate_page_range() after call __first_valid_page()), so that would cause checking unmovable pages span two pageblocks. After this patch, the checking is enforced within one pageblock no matter the page is first one or not, and obey the semantics of this function. This issue is found by code inspection. Michal said "this might lead to false negatives when an unrelated block would cause an isolation failure". Signed-off-by:
Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by:
Oscar Salvador <osalvador@suse.de> Acked-by:
-
David Hildenbrand authored
Let's document what ZONE_MOVABLE means, how it's used, and which special cases we have regarding unmovable pages (memory offlining vs. migration / allocations). Signed-off-by:
-
David Hildenbrand authored
When introducing virtio-mem, the semantics of ZONE_MOVABLE were rather unclear, which is why we special-cased ZONE_MOVABLE such that partially plugged blocks would never end up in ZONE_MOVABLE. Now that the semantics are much clearer (and will be documented in a follow-up patch including the new virtio-mem behavior), let's allow to online partially plugged memory blocks to ZONE_MOVABLE and also consider memory blocks that were onlined to ZONE_MOVABLE when unplugging memory. While unplugged memory pages are, in general, unmovable, they can be skipped when offlining memory. virtio-mem only unplugs fairly big chunks (in the megabyte range) and rather tries to shrink the memory region than randomly choosing memory. In theory, if all other pages in the movable zone would be movable, virtio-mem would only shrink that zone and not create any kind of fragmentation. In the future, we might want to remember the zone again and use the information when (un)plugging memory. For now, let's keep it simple. Note: Support for defragmentation is planned, to deal with fragmentation after unplug due to memory chunks within memory blocks that could not get unplugged before (e.g., somebody pinning pages within ZONE_MOVABLE for a longer time). Signed-off-by:
-
David Hildenbrand authored
Let's clean it up a bit, simplifying the exit paths. Signed-off-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Qian Cai <cai@lca.pw> Link: http://lkml.kernel.org/r/20200816125333.7434-5-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
Inside has_unmovable_pages(), we have a comment describing how unmovable data could end up in ZONE_MOVABLE - via "movablecore". Also, besides checking if the first page in the pageblock is reserved, we don't perform any further checks in case of ZONE_MOVABLE. In case of memory offlining, we set REPORT_FAILURE, properly dump_page() the page and handle the error gracefully. alloc_contig_pages() users currently never allocate from ZONE_MOVABLE. E.g., hugetlb uses alloc_contig_pages() for the allocation of gigantic pages only, which will never end up on the MOVABLE zone (see htlb_alloc_mask()). Signed-off-by:
-
David Hildenbrand authored
Right now, if we have two isolations racing on a pageblock that's in the MOVABLE zone, we would trigger the WARN_ON_ONCE(). Let's just return directly, simplifying error handling. The change was introduced in commit 3d680bdf ("mm/page_isolation: fix potential warning from user"). As far as I can see, we currently don't have alloc_contig_range() users that use the ZONE_MOVABLE (anymore), so it's currently more a cleanup and a preparation for the future than a fix. Signed-off-by:
-
David Hildenbrand authored
Patch series "mm / virtio-mem: support ZONE_MOVABLE", v5. When introducing virtio-mem, the semantics of ZONE_MOVABLE were rather unclear, which is why we special-cased ZONE_MOVABLE such that partially plugged blocks would never end up in ZONE_MOVABLE. Now that the semantics are much clearer (and are documented in patch #6), let's support partially plugged memory blocks in ZONE_MOVABLE, allowing partially plugged memory blocks to be online to ZONE_MOVABLE and also unplugging from such memory blocks. This avoids surprises when onlining of memory blocks suddenly fails, just because they are not completely populated by virtio-mem (yet). This is especially helpful for testing, but also paves the way for virtio-mem optimizations, allowing more memory to get reliably unplugged. Cleanup has_unmovable_pages() and set_migratetype_isolate(), providing better documentation of how ZONE_MOVABLE interacts with different kind of unmovable pages (memory offlining vs. alloc_contig_range()). This patch (of 6): Let's move the split comment regarding bootmem allocations and memory holes, especially in the context of ZONE_MOVABLE, to the PageReserved() check. Signed-off-by:
-
David Gow authored
KASAN errors will currently trigger a panic when panic_on_warn is set. This renders kasan_multishot useless, as further KASAN errors won't be reported if the kernel has already paniced. By making kasan_multishot disable this behaviour for KASAN errors, we can still have the benefits of panic_on_warn for non-KASAN warnings, yet be able to use kasan_multishot. This is particularly important when running KASAN tests, which need to trigger multiple KASAN errors: previously these would panic the system if panic_on_warn was set, now they can run (and will panic the system should non-KASAN warnings show up). Signed-off-by:
David Gow <davidgow@google.com> Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Reviewed-by:
Brendan Higgins <brendanhiggins@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Patricia Alfonso <trishalfonso@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200915035828.570483-6-davidgow@google.com Link: https://lkml.kernel.org/r/20200910070331.3358048-6-davidgow@google.comSigned-off-by:
-
Patricia Alfonso authored
Include documentation on how to test KASAN using CONFIG_TEST_KASAN_KUNIT and CONFIG_TEST_KASAN_MODULE. Signed-off-by:
Patricia Alfonso <trishalfonso@google.com> Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
-
Patricia Alfonso authored
Transfer all previous tests for KASAN to KUnit so they can be run more easily. Using kunit_tool, developers can run these tests with their other KUnit tests and see "pass" or "fail" with the appropriate KASAN report instead of needing to parse each KASAN report to test KASAN functionalities. All KASAN reports are still printed to dmesg. Stack tests do not work properly when KASAN_STACK is enabled so those tests use a check for "if IS_ENABLED(CONFIG_KASAN_STACK)" so they only run if stack instrumentation is enabled. If KASAN_STACK is not enabled, KUnit will print a statement to let the user know this test was not run with KASAN_STACK enabled. copy_user_test and kasan_rcu_uaf cannot be run in KUnit so there is a separate test file for those tests, which can be run as before as a module. [trishalfonso@google.com: v14] Link: https://lkml.kernel.org/r/20200915035828.570483-4-davidgow@google.comSigned-off-by:
-
Patricia Alfonso authored
Integrate KASAN into KUnit testing framework. - Fail tests when KASAN reports an error that is not expected - Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN tests - Expected KASAN reports pass tests and are still printed when run without kunit_tool (kunit_tool still bypasses the report due to the test passing) - KUnit struct in current task used to keep track of the current test from KASAN code Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add support for named resources" from Alan Maguire [1] - A named resource is added to a test when a KASAN report is expected - This resource contains a struct for kasan_data containing booleans representing if a KASAN report is expected and if a KASAN report is found [1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t) Signed-off-by: -
Patricia Alfonso authored
Patch series "KASAN-KUnit Integration", v14. This patchset contains everything needed to integrate KASAN and KUnit. KUnit will be able to: (1) Fail tests when an unexpected KASAN error occurs (2) Pass tests when an expected KASAN error occurs Convert KASAN tests to KUnit with the exception of copy_user_test because KUnit is unable to test those. Add documentation on how to run the KASAN tests with KUnit and what to expect when running these tests. This patch (of 5): In order to integrate debugging tools like KASAN into the KUnit framework, add KUnit struct to the current task to keep track of the current KUnit test. Signed-off-by:
-
Alexander Gordeev authored
In the context of the anonymous address space lifespan description the 'mm_users' reference counter is confused with 'mm_count'. I.e a "zombie" mm gets released when "mm_count" becomes zero, not "mm_users". Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
-
Hui Su authored
Fix the comment of find_vm_area() and get_vm_area() Signed-off-by:
-
Hui Su authored
Since c67dc624 ("mm/vmalloc: do not call kmemleak_free() on not yet accounted memory"), the __vunmap() have been changed to __vfree(), so update the confusing comment(). Signed-off-by:
-
Alex Shi authored
Unlike others we don't use the marco writeback. so let's remove it to tame gcc warning: mm/memory-failure.c:827: warning: macro "writeback" is not used [-Wunused-macros] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by:
-
Xianting Tian authored
There is no need to calculate pgoff in each loop of for_each_process(), so move it to the place before for_each_process(), which can save some CPU cycles. Signed-off-by:
Xianting Tian <tian.xianting@h3c.com> Signed-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Link: http://lkml.kernel.org/r/20200818082647.34322-1-tian.xianting@h3c.comSigned-off-by:
-
Andy Shevchenko authored
No need to hard code function name when __func__ can be used. While here, replace specifiers for special types like dma_addr_t. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
