- 15 Apr, 2018 9 commits
-
-
Matt Ranostay authored
usleep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Cc: Nicholas Mc Guire <hofrat@osadl.org> Link: http://lkml.org/lkml/2017/1/11/377Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Peter Rosin authored
Use the new probe style for i2c drivers. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
Use the new probe style for i2c drivers. Signed-off-by:
-
Jean-Baptiste Maneyrol authored
There is no need to flush fifo and loose all data when the iio buffer is full. Just drop the data by ignoring the error as commonly done in other drivers. Signed-off-by:
Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Reviewed-by:
Martin Kelly <martin@martingkelly.com> Signed-off-by:
-
Hernán Gonzalez authored
Reorder some variable declarations in an inverse-pyramid scheme. Signed-off-by:
Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by:
-
Hernán Gonzalez authored
Signed-off-by:
-
Hernán Gonzalez authored
Clear checkpatch.pl WARNING about multiple line derefence but creates a new one of line over 80 characters. In my opinion, it improves readability. Signed-off-by:
-
Hernán Gonzalez authored
Clear a couple more checkpatch.pl CHECKS. Signed-off-by:
-
Hernán Gonzalez authored
Data to read or write was being handled with the swab16() macro instead of using i2c_smbus_{read,write}_swapped. Signed-off-by:
-
- 08 Apr, 2018 3 commits
-
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM ISM330DLC 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/ism330dlc.pdfSigned-off-by:
-
Lorenzo Bianconi authored
According to the latest datasheet, LSM6DSM and LSM6DSL imu sensors export GENMASK(10, 0) for FIFO threshold mask definition. Despite that is not an actual issue since write on fifo_th register is protected by max_fifo_size value, fix fifo_th and fifo_diff register definitions Fixes: 290a6ce1 ("iio: imu: add support to lsm6dsx driver") Signed-off-by:
-
- 30 Mar, 2018 10 commits
-
-
Shreeya Patel authored
Move the adis16209 driver out of staging directory and merge to the mainline IIO subsystem. Signed-off-by:
Shreeya Patel <shreeya.patel23498@gmail.com> Signed-off-by:
-
Shreeya Patel authored
Use GENMASK to improve readability and remove the local variables used to store intermediate data. Signed-off-by:
-
Shreeya Patel authored
Remove few unused header files since the adis core handles the sysfs and buffer support. Signed-off-by:
-
Shreeya Patel authored
Add a blank line after return statements to improve the code readability. Signed-off-by:
-
Shreeya Patel authored
Prefer reverse christmas tree ordering of declarations to improve readability. Signed-off-by:
-
Shreeya Patel authored
Have indentation in field definitions to make them clearly different from the register addresses. Signed-off-by:
-
Jean-Baptiste Maneyrol authored
Signed-off-by:
-
Xingyu Chen authored
Add the SAR ADC driver for the Amlogic Meson-AXG SoC. Signed-off-by:
Xingyu Chen <xingyu.chen@amlogic.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Xingyu Chen authored
Update the documentation to expicitly support the Meson-AXG SoC. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Yixun Lan authored
Extract and promote common adc platform data into a new structure, to make it better share the info between several SoCs, this will avoid duplicating the code all over the place, Save a few memory and make the code more maintainable. Signed-off-by:
Yixun Lan <yixun.lan@amlogic.com> Acked-by:
-
- 25 Mar, 2018 2 commits
-
-
Brian Masney authored
The events IIO_EV_INFO_VALUE and IIO_EV_INFO_ENABLE currently have a falling and rising direction configured. There does not need to be a separate distinction so this patch changes these to use the either direction. Directory listing of event sysfs attributes for a TSL2772 with this patch applied: in_intensity0_thresh_either_en in_intensity0_thresh_either_period in_intensity0_thresh_falling_value in_intensity0_thresh_rising_value in_proximity0_thresh_either_en in_proximity0_thresh_either_period in_proximity0_thresh_falling_value in_proximity0_thresh_rising_value Signed-off-by:
Brian Masney <masneyb@onstation.org> Signed-off-by:
-
Brian Masney authored
The hardware supports 16-bit ALS and proximity readings, however the datasheet recommends using the I2C auto increment protocol so that the correct high and low bytes are read even if the integration cycle ends between reading the lower and upper registers. Signed-off-by:
-
- 24 Mar, 2018 16 commits
-
-
Himanshu Jha authored
Move adis16201 driver out of staging and merge into mainline IIO subsystem. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Split the line over 80 characters limit to fix checkpatch warning. Signed-off-by:
-
Himanshu Jha authored
Use GENMASK to improve readability and remove the local variables used to store intermediate data. Signed-off-by:
-
Himanshu Jha authored
Remove few unused headers files since the adis core handles the buffer and sysfs support. Signed-off-by:
-
Brian Masney authored
Add Brian Masney's copyright and to the list of module authors for all of the staging cleanups. This patch also update's Jon Brenner's current work email address since AMS now owns TAOS. Signed-off-by:
-
Brian Masney authored
This patch ensures that all of the local variable declarations are in reverse Christmas tree order where possible to increase code readability. Signed-off-by:
-
Brian Masney authored
Remove the ch0 and ch1 variables from tsl2x7x_get_lux() and write those values directly into the chip->als_cur_info.als_ch0 and chip->als_cur_info.als_ch01 variables. Signed-off-by:
-
Brian Masney authored
tsl2x7x_get_lux() has a ch0lux and ch1lux variables that are not used so this patch removes them. Signed-off-by:
-
Brian Masney authored
The struct tsl2x7x_settings contained a persistence member that contained both the ALS and proximity persistence fields. This patch splits this out into two separate fields so that the bitmasks in several parts of the code are no longer necessary. The default persistence settings are also changed by this patch from: - Proximity: 0 (Every proximity cycle generates an interrupt) - ALS: 255 (60 consecutive values out of range) to something a little more reasonable based on my testing: - Proximity: 1 (1 proximity value out of range) - ALS: 1 (1 value outside of threshold range) Signed-off-by:
-
Brian Masney authored
This patch updates all of the logging commands so that they are consistent with the other messages, includes __func__ in the message, and all of the messages include newlines. This patch also removes some debug log messages. Signed-off-by:
-
Brian Masney authored
The struct tsl2x7x_settings contained an interrupts_en member that was a bitmask for which interrupts are enabled. This required having bitmasks in several parts of the code. This patch splits this field out into two booleans to remove most of the bitmasks in the code. This patch also fixes a bug where if an interrupt pin was configured, but proximity interrupts were disabled, then the proximity value could not be polled. This patch also removes an unnecessary second call to writing the control register in tsl2x7x_chip_on(). Driver tested using a TSL2772 hooked up to a Raspberry Pi 2. Signed-off-by:
-
Brian Masney authored
tsl2x7x_prox_cal() would set the interrupt flag, and reset the device to start doing the calibration routine. However, this did not actually affect the readings since they are polled. This patch drops the interrupt code. This patch also drops the function tsl2x7x_prox_calculate() and removes support for the standard deviation and min sample since those values were not used. Driver was tested using a TSL2772 hooked up to a Raspberry Pi 2. I performed the following testing at various distances: - Put hand in front of sensor and keep the sensor and hand stationary. - Perform calibration routine. - Run iio_event_monitor. - Verify that a proximity event is triggered when my hand comes anywhere between the sensor and where I performed the calibration routine. Signed-off-by:
-
Brian Masney authored
tsl2x7x_get_lux() does not need to clear the interrupt flag when querying the ALS. The interrupt flag is cleared in tsl2x7x_event_handler(). This patches removes the unnecessary code. Signed-off-by:
-
Brian Masney authored
tsl2x7x_event_handler() was not called as expected when the device was asserting a hardware interrupt. This patch changes the interrupt line trigger from rising to falling. The driver was tested on a TSL2772 hooked up to a Raspberry Pi 2. The interrupt pin also had a 10K pull-up resistor per the requirements from the datasheet. The relevant device tree binding: &i2c1 { tsl2772@39 { compatible = "amstaos,tsl2772"; reg = <0x39>; interrupt-parent = <&gpio>; interrupts = <22 0x2>; }; }; With this patch, iio_event_monitor now shows the events when the channels are outside the defined interrupt thresholds. $ sudo ./iio_event_monitor tsl2772 Found IIO device with name tsl2772 with device number 0 Event: time: 1478193460053760446, type: proximity, channel: 0, evtype: thresh, direction: either ... Event: time: 1478193463020270185, type: illuminance, channel: 0, evtype: thresh, direction: either ... Signed-off-by: -
Brian Masney authored
As a follow up to the work in commit a0722d05 ("staging: iio: tsl2x7x: convert mutex_trylock() to mutex_lock()"), this patch removes the unnecessary calls to tsl2x7x_get_prox() and tsl2x7x_get_lux() in tsl2x7x_event_handler(). Previously, these functions were locked with mutex_trylock(), but that is no longer the case. This patch also removes a comment that is no longer relevant about returning the last sample. Signed-off-by:
-
Rodrigo Siqueira authored
The original code had a read function per data size; after updates, all read functions tasks were centralized in a single function, but the old signature was kept to maintain the module working without problems. This patch removes a set of duplications associated with read_reg_*, and update the areas that calling the old interface by the new one. Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
