- 31 Jul, 2017 40 commits
-
-
Mark Rutland authored
[ Upstream commit 3c226c63 ] In do_huge_pmd_numa_page(), we attempt to handle a migrating thp pmd by waiting until the pmd is unlocked before we return and retry. However, we can race with migrate_misplaced_transhuge_page(): // do_huge_pmd_numa_page // migrate_misplaced_transhuge_page() // Holds 0 refs on page // Holds 2 refs on page vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd); /* ... */ if (pmd_trans_migrating(*vmf->pmd)) { page = pmd_page(*vmf->pmd); spin_unlock(vmf->ptl); ptl = pmd_lock(mm, pmd); if (page_count(page) != 2)) { /* roll back */ } /* ... */ mlock_migrate_page(new_page, page); /* ... */ spin_unlock(ptl); put_page(page); put_page(page); // page freed here wait_on_page_locked(page); goto out; } This can result in the freed page having its waiters flag set unexpectedly, which trips the PAGE_FLAGS_CHECK_AT_PREP checks in the page alloc/free functions. This has been observed on arm64 KVM guests. We can avoid this by having do_huge_pmd_numa_page() take a reference on the page before dropping the pmd lock, mirroring what we do in __migration_entry_wait(). When we hit the race, migrate_misplaced_transhuge_page() will see the reference and abort the migration, as it may do today in other cases. Fixes: b8916634 ("mm: Prevent parallel splits during THP migration") Link: http://lkml.kernel.org/r/1497349722-6731-2-git-send-email-will.deacon@arm.comSigned-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Steve Capper <steve.capper@arm.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Kees Cook authored
[ Upstream commit 41662f5c ] SYSCTL_WRITES_WARN was added in commit f4aacea2 ("sysctl: allow for strict write position handling"), and released in v3.16 in August of 2014. Since then I can find only 1 instance of non-zero offset writing[1], and it was fixed immediately in CRIU[2]. As such, it appears safe to flip this to the strict state now. [1] https://www.google.com/search?q="when%20file%20position%20was%20not%200" [2] http://lists.openvz.org/pipermail/criu/2015-April/019819.htmlSigned-off-by:
Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Baolin Wang authored
[ Upstream commit b3ce3ce0 ] When system try to close /dev/usb-ffs/adb/ep0 on one core, at the same time another core try to attach new UDC, which will cause deadlock as below scenario. Thus we should release ffs lock before issuing unregister_gadget_item(). [ 52.642225] c1 ====================================================== [ 52.642228] c1 [ INFO: possible circular locking dependency detected ] [ 52.642236] c1 4.4.6+ #1 Tainted: G W O [ 52.642241] c1 ------------------------------------------------------- [ 52.642245] c1 usb ffs open/2808 is trying to acquire lock: [ 52.642270] c0 (udc_lock){+.+.+.}, at: [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642272] c1 but task is already holding lock: [ 52.642283] c0 (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642285] c1 which lock already depends on the new lock. [ 52.642287] c1 the existing dependency chain (in reverse order) is: [ 52.642295] c0 -> #1 (ffs_lock){+.+.+.}: [ 52.642307] c0 [<ffffffc00012340c>] __lock_acquire+0x20f0/0x2238 [ 52.642314] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642322] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642328] c0 [<ffffffc00066f7bc>] ffs_func_bind+0x504/0x6e8 [ 52.642334] c0 [<ffffffc000654004>] usb_add_function+0x84/0x184 [ 52.642340] c0 [<ffffffc000658ca4>] configfs_composite_bind+0x264/0x39c [ 52.642346] c0 [<ffffffc00065b348>] udc_bind_to_driver+0x58/0x11c [ 52.642352] c0 [<ffffffc00065b49c>] usb_udc_attach_driver+0x90/0xc8 [ 52.642358] c0 [<ffffffc0006598e0>] gadget_dev_desc_UDC_store+0xd4/0x128 [ 52.642369] c0 [<ffffffc0002c14e8>] configfs_write_file+0xd0/0x13c [ 52.642376] c0 [<ffffffc00023c054>] vfs_write+0xb8/0x214 [ 52.642381] c0 [<ffffffc00023cad4>] SyS_write+0x54/0xb0 [ 52.642388] c0 [<ffffffc000085ff0>] el0_svc_naked+0x24/0x28 [ 52.642395] c0 -> #0 (udc_lock){+.+.+.}: [ 52.642401] c0 [<ffffffc00011e3d0>] print_circular_bug+0x84/0x2e4 [ 52.642407] c0 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642412] c0 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642420] c0 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642427] c0 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642432] c0 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642439] c0 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642444] c0 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642450] c0 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642454] c0 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642460] c0 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642466] c0 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642473] c0 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642482] c0 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642487] c0 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642494] c0 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642501] c0 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642507] c0 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642512] c0 [<ffffffc000085ee8>] work_pending+0x1c/0x20 [ 52.642514] c1 other info that might help us debug this: [ 52.642517] c1 Possible unsafe locking scenario: [ 52.642518] c1 CPU0 CPU1 [ 52.642520] c1 ---- ---- [ 52.642525] c0 lock(ffs_lock); [ 52.642529] c0 lock(udc_lock); [ 52.642533] c0 lock(ffs_lock); [ 52.642537] c0 lock(udc_lock); [ 52.642539] c1 *** DEADLOCK *** [ 52.642543] c1 1 lock held by usb ffs open/2808: [ 52.642555] c0 #0: (ffs_lock){+.+.+.}, at: [<ffffffc00066b244>] ffs_data_clear+0x30/0x140 [ 52.642557] c1 stack backtrace: [ 52.642563] c1 CPU: 1 PID: 2808 Comm: usb ffs open Tainted: G [ 52.642565] c1 Hardware name: Spreadtrum SP9860g Board (DT) [ 52.642568] c1 Call trace: [ 52.642573] c1 [<ffffffc00008b430>] dump_backtrace+0x0/0x170 [ 52.642577] c1 [<ffffffc00008b5c0>] show_stack+0x20/0x28 [ 52.642583] c1 [<ffffffc000422694>] dump_stack+0xa8/0xe0 [ 52.642587] c1 [<ffffffc00011e548>] print_circular_bug+0x1fc/0x2e4 [ 52.642591] c1 [<ffffffc000123454>] __lock_acquire+0x2138/0x2238 [ 52.642595] c1 [<ffffffc000123b54>] lock_acquire+0xe4/0x298 [ 52.642599] c1 [<ffffffc000aaf6e8>] mutex_lock_nested+0x7c/0x3cc [ 52.642604] c1 [<ffffffc00065aeec>] usb_gadget_unregister_driver+0x3c/0xc8 [ 52.642608] c1 [<ffffffc00065995c>] unregister_gadget_item+0x28/0x44 [ 52.642613] c1 [<ffffffc00066b34c>] ffs_data_clear+0x138/0x140 [ 52.642618] c1 [<ffffffc00066b374>] ffs_data_reset+0x20/0x6c [ 52.642621] c1 [<ffffffc00066efd0>] ffs_data_closed+0xac/0x12c [ 52.642625] c1 [<ffffffc00066f070>] ffs_ep0_release+0x20/0x2c [ 52.642629] c1 [<ffffffc00023dbe4>] __fput+0xb0/0x1f4 [ 52.642633] c1 [<ffffffc00023dd9c>] ____fput+0x20/0x2c [ 52.642636] c1 [<ffffffc0000ee944>] task_work_run+0xb4/0xe8 [ 52.642640] c1 [<ffffffc0000cd45c>] do_exit+0x360/0xb9c [ 52.642644] c1 [<ffffffc0000cf228>] do_group_exit+0x4c/0xb0 [ 52.642647] c1 [<ffffffc0000dd3c8>] get_signal+0x380/0x89c [ 52.642651] c1 [<ffffffc00008a8f0>] do_signal+0x154/0x518 [ 52.642656] c1 [<ffffffc00008af00>] do_notify_resume+0x70/0x78 [ 52.642659] c1 [<ffffffc000085ee8>] work_pending+0x1c/0x20 Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Deepak Rawat authored
[ Upstream commit 82fcee52 ] The hash table created during vmw_cmdbuf_res_man_create was never freed. This causes memory leak in context creation. Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy. Tested for memory leak by running piglit overnight and kernel memory is not inflated which earlier was. Cc: <stable@vger.kernel.org> Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Hui Wang authored
[ Upstream commit a8f20fd2 ] Recently we met a problem, the codec has valid adcs and input pins, and they can form valid input paths, but the driver does not build valid controls for them like "Mic boost", "Capture Volume" and "Capture Switch". Through debugging, I found the driver needs to shrink the invalid adcs and input paths for this machine, so it will move the whole column bitmap value to the previous column, after moving it, the driver forgets to set the original column bitmap value to zero, as a result, the driver will invalidate the path whose index value is the original colume bitmap value. After executing this function, all valid input paths are invalidated by a mistake, there are no any valid input paths, so the driver won't build controls for them. Fixes: 3a65bcdc ("ALSA: hda - Fix inconsistent input_paths after ADC reduction") Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Paul Burton authored
[ Upstream commit d8550860 ] When the scheduler sets TIF_NEED_RESCHED & we call into the scheduler from arch/mips/kernel/entry.S we disable interrupts. This is true regardless of whether we reach work_resched from syscall_exit_work, resume_userspace or by looping after calling schedule(). Although we disable interrupts in these paths we don't call trace_hardirqs_off() before calling into C code which may acquire locks, and we therefore leave lockdep with an inconsistent view of whether interrupts are disabled or not when CONFIG_PROVE_LOCKING & CONFIG_DEBUG_LOCKDEP are both enabled. Without tracing this interrupt state lockdep will print warnings such as the following once a task returns from a syscall via syscall_exit_partial with TIF_NEED_RESCHED set: [ 49.927678] ------------[ cut here ]------------ [ 49.934445] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:3687 check_flags.part.41+0x1dc/0x1e8 [ 49.946031] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 49.946355] CPU: 0 PID: 1 Comm: init Not tainted 4.10.0-00439-gc9fd5d362289-dirty #197 [ 49.963505] Stack : 0000000000000000 ffffffff81bb5d6a 0000000000000006 ffffffff801ce9c4 [ 49.974431] 0000000000000000 0000000000000000 0000000000000000 000000000000004a [ 49.985300] ffffffff80b7e487 ffffffff80a24498 a8000000ff160000 ffffffff80ede8b8 [ 49.996194] 0000000000000001 0000000000000000 0000000000000000 0000000077c8030c [ 50.007063] 000000007fd8a510 ffffffff801cd45c 0000000000000000 a8000000ff127c88 [ 50.017945] 0000000000000000 ffffffff801cf928 0000000000000001 ffffffff80a24498 [ 50.028827] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 50.039688] 0000000000000000 a8000000ff127bd0 0000000000000000 ffffffff805509bc [ 50.050575] 00000000140084e0 0000000000000000 0000000000000000 0000000000040a00 [ 50.061448] 0000000000000000 ffffffff8010e1b0 0000000000000000 ffffffff805509bc [ 50.072327] ... [ 50.076087] Call Trace: [ 50.079869] [<ffffffff8010e1b0>] show_stack+0x80/0xa8 [ 50.086577] [<ffffffff805509bc>] dump_stack+0x10c/0x190 [ 50.093498] [<ffffffff8015dde0>] __warn+0xf0/0x108 [ 50.099889] [<ffffffff8015de34>] warn_slowpath_fmt+0x3c/0x48 [ 50.107241] [<ffffffff801c15b4>] check_flags.part.41+0x1dc/0x1e8 [ 50.114961] [<ffffffff801c239c>] lock_is_held_type+0x8c/0xb0 [ 50.122291] [<ffffffff809461b8>] __schedule+0x8c0/0x10f8 [ 50.129221] [<ffffffff80946a60>] schedule+0x30/0x98 [ 50.135659] [<ffffffff80106278>] work_resched+0x8/0x34 [ 50.142397] ---[ end trace 0cb4f6ef5b99fe21 ]--- [ 50.148405] possible reason: unannotated irqs-off. [ 50.154600] irq event stamp: 400463 [ 50.159566] hardirqs last enabled at (400463): [<ffffffff8094edc8>] _raw_spin_unlock_irqrestore+0x40/0xa8 [ 50.171981] hardirqs last disabled at (400462): [<ffffffff8094eb98>] _raw_spin_lock_irqsave+0x30/0xb0 [ 50.183897] softirqs last enabled at (400450): [<ffffffff8016580c>] __do_softirq+0x4ac/0x6a8 [ 50.195015] softirqs last disabled at (400425): [<ffffffff80165e78>] irq_exit+0x110/0x128 Fix this by using the TRACE_IRQS_OFF macro to call trace_hardirqs_off() when CONFIG_TRACE_IRQFLAGS is enabled. This is done before invoking schedule() following the work_resched label because: 1) Interrupts are disabled regardless of the path we take to reach work_resched() & schedule(). 2) Performing the tracing here avoids the need to do it in paths which disable interrupts but don't call out to C code before hitting a path which uses the RESTORE_SOME macro that will call trace_hardirqs_on() or trace_hardirqs_off() as appropriate. We call trace_hardirqs_on() using the TRACE_IRQS_ON macro before calling syscall_trace_leave() for similar reasons, ensuring that lockdep has a consistent view of state after we re-enable interrupts. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: linux-mips@linux-mips.org Cc: stable <stable@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/15385/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 161c51cc ] We allocate memory for a ready_count variable per-CPU, which is accessed via a cached non-coherent TLB mapping to perform synchronisation between threads within the core using LL/SC instructions. In order to ensure that the variable is contained within its own data cache line we allocate 2 lines worth of memory & align the resulting pointer to a line boundary. This is however unnecessary, since kmalloc is guaranteed to return memory which is at least cache-line aligned (see ARCH_DMA_MINALIGN). Stop the redundant manual alignment. Besides cleaning up the code & avoiding needless work, this has the side effect of avoiding an arithmetic error found by Bryan on 64 bit systems due to the 32 bit size of the former dlinesz. This led the ready_count variable to have its upper 32b cleared erroneously for MIPS64 kernels, causing problems when ready_count was later used on MIPS64 via cpuidle. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@imgtec.com> Reviewed-by:
-
James Hogan authored
[ Upstream commit 85423636 ] Since commit 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode") show_backtrace() invokes the raw backtracer when cp0_status & ST0_KSU indicates user mode to fix issues on EVA kernels where user and kernel address spaces overlap. However this is used by show_stack() which creates its own pt_regs on the stack and leaves cp0_status uninitialised in most of the code paths. This results in the non deterministic use of the raw back tracer depending on the previous stack content. show_stack() deals exclusively with kernel mode stacks anyway, so explicitly initialise regs.cp0_status to KSU_KERNEL (i.e. 0) to ensure we get a useful backtrace. Fixes: 81a76d71 ("MIPS: Avoid using unwind_stack() with usermode") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15+ Patchwork: https://patchwork.linux-mips.org/patch/16656/Signed-off-by:
-
David Rientjes authored
[ Upstream commit 460bcec8 ] We got need_resched() warnings in swap_cgroup_swapoff() because swap_cgroup_ctrl[type].length is particularly large. Reschedule when needed. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704061315270.80559@chino.kir.corp.google.comSigned-off-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Russell Currey authored
[ Upstream commit 71f677a9 ] The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". A recent patch went in to try to check if that window is open but it does so by trying to access the registers in question and testing if the result is 0xffffffff. This method will trigger a PCIe error when the window is closed which on some systems will be fatal (it will trigger an EEH for example on POWER which will take out the device). This patch improves this in two ways: - First, if the firmware has put properties in the device-tree containing the relevant configuration information, we use these. - Otherwise, a bit in one of the SCU scratch registers (which are readable via the VGA register space and writeable by the BMC) will indicate if the BMC has closed the window. This bit has been defined by Y.C Chen from Aspeed. If the window is closed and the configuration isn't available from the device-tree, some sane defaults are used. Those defaults are hopefully sufficient for standard video modes used on a server. Signed-off-by:
Russell Currey <ruscur@russell.cc> Acked-by:
Joel Stanley <joel@jms.id.au> Cc: <stable@vger.kernel.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Kinglong Mee authored
[ Upstream commit 366a1569 ] Because nfs4_opendata_access() has close the state when access is denied, so the state isn't leak. Rather than revert the commit a974deee, I'd like clean the strange state close. [ 1615.094218] ------------[ cut here ]------------ [ 1615.094607] WARNING: CPU: 0 PID: 23702 at lib/list_debug.c:31 __list_add_valid+0x8e/0xa0 [ 1615.094913] list_add double add: new=ffff9d7901d9f608, prev=ffff9d7901d9f608, next=ffff9d7901ee8dd0. [ 1615.095458] Modules linked in: nfsv4(E) nfs(E) nfsd(E) tun bridge stp llc fuse ip_set nfnetlink vmw_vsock_vmci_transport vsock f2fs snd_seq_midi snd_seq_midi_event fscrypto coretemp ppdev crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_rapl_perf vmw_balloon snd_ens1371 joydev gameport snd_ac97_codec ac97_bus snd_seq snd_pcm snd_rawmidi snd_timer snd_seq_device snd soundcore nfit parport_pc parport acpi_cpufreq tpm_tis tpm_tis_core tpm i2c_piix4 vmw_vmci shpchp auth_rpcgss nfs_acl lockd(E) grace sunrpc(E) xfs libcrc32c vmwgfx drm_kms_helper ttm drm crc32c_intel mptspi e1000 serio_raw scsi_transport_spi mptscsih mptbase ata_generic pata_acpi fjes [last unloaded: nfs] [ 1615.097663] CPU: 0 PID: 23702 Comm: fstest Tainted: G W E 4.11.0-rc1+ #517 [ 1615.098015] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 1615.098807] Call Trace: [ 1615.099183] dump_stack+0x63/0x86 [ 1615.099578] __warn+0xcb/0xf0 [ 1615.099967] warn_slowpath_fmt+0x5f/0x80 [ 1615.100370] __list_add_valid+0x8e/0xa0 [ 1615.100760] nfs4_put_state_owner+0x75/0xc0 [nfsv4] [ 1615.101136] __nfs4_close+0x109/0x140 [nfsv4] [ 1615.101524] nfs4_close_state+0x15/0x20 [nfsv4] [ 1615.101949] nfs4_close_context+0x21/0x30 [nfsv4] [ 1615.102691] __put_nfs_open_context+0xb8/0x110 [nfs] [ 1615.103155] put_nfs_open_context+0x10/0x20 [nfs] [ 1615.103586] nfs4_file_open+0x13b/0x260 [nfsv4] [ 1615.103978] do_dentry_open+0x20a/0x2f0 [ 1615.104369] ? nfs4_copy_file_range+0x30/0x30 [nfsv4] [ 1615.104739] vfs_open+0x4c/0x70 [ 1615.105106] ? may_open+0x5a/0x100 [ 1615.105469] path_openat+0x623/0x1420 [ 1615.105823] do_filp_open+0x91/0x100 [ 1615.106174] ? __alloc_fd+0x3f/0x170 [ 1615.106568] do_sys_open+0x130/0x220 [ 1615.106920] ? __put_cred+0x3d/0x50 [ 1615.107256] SyS_open+0x1e/0x20 [ 1615.107588] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 1615.107922] RIP: 0033:0x7fab599069b0 [ 1615.108247] RSP: 002b:00007ffcf0600d78 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 [ 1615.108575] RAX: ffffffffffffffda RBX: 00007fab59bcfae0 RCX: 00007fab599069b0 [ 1615.108896] RDX: 0000000000000200 RSI: 0000000000000200 RDI: 00007ffcf060255e [ 1615.109211] RBP: 0000000000040010 R08: 0000000000000000 R09: 0000000000000016 [ 1615.109515] R10: 00000000000006a1 R11: 0000000000000246 R12: 0000000000041000 [ 1615.109806] R13: 0000000000040010 R14: 0000000000001000 R15: 0000000000002710 [ 1615.110152] ---[ end trace 96ed63b1306bf2f3 ]--- Fixes: a974deee ("NFSv4: Fix memory and state leak in...") Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Eric Leblond authored
[ Upstream commit 87e94dbc ] This patch fixes the creation of connection tracking entry from netlink when synproxy is used. It was missing the addition of the synproxy extension. This was causing kernel crashes when a conntrack entry created by conntrackd was used after the switch of traffic from active node to the passive node. Signed-off-by:
Eric Leblond <eric@regit.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2638fd0f ] Denys provided an awesome KASAN report pointing to an use after free in xt_TCPMSS I have provided three patches to fix this issue, either in xt_TCPMSS or in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible impact. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by:
-
Gao Feng authored
[ Upstream commit 9745e362 ] The register_vlan_device would invoke free_netdev directly, when register_vlan_dev failed. It would trigger the BUG_ON in free_netdev if the dev was already registered. In this case, the netdev would be freed in netdev_run_todo later. So add one condition check now. Only when dev is not registered, then free it directly. The following is the part coredump when netdev_upper_dev_link failed in register_vlan_dev. I removed the lines which are too long. [ 411.237457] ------------[ cut here ]------------ [ 411.237458] kernel BUG at net/core/dev.c:7998! [ 411.237484] invalid opcode: 0000 [#1] SMP [ 411.237705] [last unloaded: 8021q] [ 411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G E 4.12.0-rc5+ #6 [ 411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000 [ 411.237782] RIP: 0010:free_netdev+0x116/0x120 [ 411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297 [ 411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878 [ 411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000 [ 411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801 [ 411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000 [ 411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000 [ 411.239518] FS: 00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000 [ 411.239949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0 [ 411.240936] Call Trace: [ 411.241462] vlan_ioctl_handler+0x3f1/0x400 [8021q] [ 411.241910] sock_ioctl+0x18b/0x2c0 [ 411.242394] do_vfs_ioctl+0xa1/0x5d0 [ 411.242853] ? sock_alloc_file+0xa6/0x130 [ 411.243465] SyS_ioctl+0x79/0x90 [ 411.243900] entry_SYSCALL_64_fastpath+0x1e/0xa9 [ 411.244425] RIP: 0033:0x7fb69089a357 [ 411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357 [ 411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003 [ 411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999 [ 411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004 [ 411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001 [ 411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0 Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 76371d2e ] In the existing dn_route.c code, dn_route_output_slow() takes dst->__refcnt before calling dn_insert_route() while dn_route_input_slow() does not take dst->__refcnt before calling dn_insert_route(). This makes the whole routing code very buggy. In dn_dst_check_expire(), dnrt_free() is called when rt expires. This makes the routes inserted by dn_route_output_slow() not able to be freed as the refcnt is not released. In dn_dst_gc(), dnrt_drop() is called to release rt which could potentially cause the dst->__refcnt to be dropped to -1. In dn_run_flush(), dst_free() is called to release all the dst. Again, it makes the dst inserted by dn_route_output_slow() not able to be released and also, it does not wait on the rcu and could potentially cause crash in the path where other users still refer to this dst. This patch makes sure both input and output path do not take dst->__refcnt before calling dn_insert_route() and also makes sure dnrt_free()/dst_free() is called when removing dst from the hash table. The only difference between those 2 calls is that dnrt_free() waits on the rcu while dst_free() does not. Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit f8a894b2 ] Now when starting the dad work in addrconf_mod_dad_work, if the dad work is idle and queued, it needs to hold ifa. The problem is there's one gap in [1], during which if the pending dad work is removed elsewhere. It will miss to hold ifa, but the dad word is still idea and queue. if (!delayed_work_pending(&ifp->dad_work)) in6_ifa_hold(ifp); <--------------[1] mod_delayed_work(addrconf_wq, &ifp->dad_work, delay); An use-after-free issue can be caused by this. Chen Wei found this issue when WARN_ON(!hlist_unhashed(&ifp->addr_lst)) in net6_ifa_finish_destroy was hit because of it. As Hannes' suggestion, this patch is to fix it by holding ifa first in addrconf_mod_dad_work, then calling mod_delayed_work and putting ifa if the dad_work is already in queue. Note that this patch did not choose to fix it with: if (!mod_delayed_work(delay)) in6_ifa_hold(ifp); As with it, when delay == 0, dad_work would be scheduled immediately, all addrconf_mod_dad_work(0) callings had to be moved under ifp->lock. Reported-by:
Wei Chen <weichen@redhat.com> Suggested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit b4846fc3 ] Andrey reported a lockdep warning on non-initialized spinlock: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755 ? 0xffffffffa0000000 __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255 lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135 _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175 spin_lock_bh ./include/linux/spinlock.h:304 ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076 igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194 ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736 We miss a spin_lock_init() in igmpv3_add_delrec(), probably because previously we never use it on this code path. Since we already unlink it from the global mc_tomb list, it is probably safe not to acquire this spinlock here. It does not harm to have it although, to avoid conditional locking. Fixes: c38b7d32 ("igmp: acquire pmc lock for ip_mc_clear_src()") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit c38b7d32 ] Andrey reported a use-after-free in add_grec(): for (psf = *psf_list; psf; psf = psf_next) { ... psf_next = psf->sf_next; where the struct ip_sf_list's were already freed by: kfree+0xe8/0x2b0 mm/slub.c:3882 ip_mc_clear_src+0x69/0x1c0 net/ipv4/igmp.c:2078 ip_mc_dec_group+0x19a/0x470 net/ipv4/igmp.c:1618 ip_mc_drop_socket+0x145/0x230 net/ipv4/igmp.c:2609 inet_release+0x4e/0x1c0 net/ipv4/af_inet.c:411 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1072 This happens because we don't hold pmc->lock in ip_mc_clear_src() and a parallel mr_ifc_timer timer could jump in and access them. The RCU lock is there but it is merely for pmc itself, this spinlock could actually ensure we don't access them in parallel. Thanks to Eric and Long for discussion on this bug. Reported-by:
-
Jia-Ju Bai authored
[ Upstream commit f146e872 ] The kernel may sleep under a rcu read lock in cfpkt_create_pfx, and the function call path is: cfcnfg_linkup_rsp (acquire the lock by rcu_read_lock) cfctrl_linkdown_req cfpkt_create cfpkt_create_pfx alloc_skb(GFP_KERNEL) --> may sleep cfserl_receive (acquire the lock by rcu_read_lock) cfpkt_split cfpkt_create_pfx alloc_skb(GFP_KERNEL) --> may sleep There is "in_interrupt" in cfpkt_create_pfx to decide use "GFP_KERNEL" or "GFP_ATOMIC". In this situation, "GFP_KERNEL" is used because the function is called under a rcu read lock, instead in interrupt. To fix it, only "GFP_ATOMIC" is used in cfpkt_create_pfx. Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
Krister Johansen authored
[ Upstream commit f186ce61 ] It looks like this: Message from syslogd@flamingo at Apr 26 00:45:00 ... kernel:unregister_netdevice: waiting for lo to become free. Usage count = 4 They seem to coincide with net namespace teardown. The message is emitted by netdev_wait_allrefs(). Forced a kdump in netdev_run_todo, but found that the refcount on the lo device was already 0 at the time we got to the panic. Used bcc to check the blocking in netdev_run_todo. The only places where we're off cpu there are in the rcu_barrier() and msleep() calls. That behavior is expected. The msleep time coincides with the amount of time we spend waiting for the refcount to reach zero; the rcu_barrier() wait times are not excessive. After looking through the list of callbacks that the netdevice notifiers invoke in this path, it appears that the dst_dev_event is the most interesting. The dst_ifdown path places a hold on the loopback_dev as part of releasing the dev associated with the original dst cache entry. Most of our notifier callbacks are straight-forward, but this one a) looks complex, and b) places a hold on the network interface in question. I constructed a new bcc script that watches various events in the liftime of a dst cache entry. Note that dst_ifdown will take a hold on the loopback device until the invalidated dst entry gets freed. [ __dst_free] on DST: ffff883ccabb7900 IF tap1008300eth0 invoked at 1282115677036183 __dst_free rcu_nocb_kthread kthread ret_from_fork Acked-by:
-
Mateusz Jurczyk authored
[ Upstream commit defbcf2d ] Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the AF_UNIX socket. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing .sa_family. Signed-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by:
-
Mateusz Jurczyk authored
[ Upstream commit 85eac2ba ] Verify that the length of the socket buffer is sufficient to cover the entire nlh->nlmsg_len field before accessing that field for further input sanitization. If the client only supplies 1-3 bytes of data in sk_buff, then nlh->nlmsg_len remains partially uninitialized and contains leftover memory from the corresponding kernel allocation. Operating on such data may result in indeterminate evaluation of the nlmsg_len < sizeof(*nlh) expression. The bug was discovered by a runtime instrumentation designed to detect use of uninitialized memory in the kernel. The patch prevents this and other similar tools (e.g. KMSAN) from flagging this behavior in the future. Signed-off-by:
-
Alexander Potapenko authored
[ Upstream commit c28294b9 ] KMSAN reported a use of uninitialized memory in dev_set_alias(), which was caused by calling strlcpy() (which in turn called strlen()) on the user-supplied non-terminated string. Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 00ea1cee ] If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped check, release the dst before returning an error. Fixes: ec5e3b0a ("ipv6: Inhibit IPv4-mapped src address on the wire.") Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
-
William Wu authored
[ Upstream commit b7f73850 ] Companion descriptor is only used for SuperSpeed endpoints, if the endpoints are HighSpeed or FullSpeed, the Companion descriptor will not allocated, so we can only access it if gadget is SuperSpeed. I can reproduce this issue on Rockchip platform rk3368 SoC which supports USB 2.0, and use functionfs for ADB. Kernel build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report the following BUG: ================================================================== BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509 Read of size 1 by task swapper/0/0 ============================================================================ BUG kmalloc-256 (Not tainted): kasan: bad access detected ---------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1 alloc_debug_processing+0x128/0x17c ___slab_alloc.constprop.58+0x50c/0x610 __slab_alloc.isra.55.constprop.57+0x24/0x34 __kmalloc+0xe0/0x250 ffs_func_bind+0x52c/0x99c usb_add_function+0xd8/0x1d4 configfs_composite_bind+0x48c/0x570 udc_bind_to_driver+0x6c/0x170 usb_udc_attach_driver+0xa4/0xd0 gadget_dev_desc_UDC_store+0xcc/0x118 configfs_write_file+0x1a0/0x1f8 __vfs_write+0x64/0x174 vfs_write+0xe4/0x200 SyS_write+0x68/0xc8 el0_svc_naked+0x24/0x28 INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247 ... Call trace: [<ffffff900808aab4>] dump_backtrace+0x0/0x230 [<ffffff900808acf8>] show_stack+0x14/0x1c [<ffffff90084ad420>] dump_stack+0xa0/0xc8 [<ffffff90082157cc>] print_trailer+0x188/0x198 [<ffffff9008215948>] object_err+0x3c/0x4c [<ffffff900821b5ac>] kasan_report+0x324/0x4dc [<ffffff900821aa38>] __asan_load1+0x24/0x50 [<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0 [<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8 [<ffffff90089d7394>] android_setup+0x124/0x1a0 [<ffffff90089acd18>] _setup+0x54/0x74 [<ffffff90089b6b98>] handle_ep0+0x3288/0x4390 [<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4 [<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298 [<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20 [<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac [<ffffff9008116610>] handle_irq_event+0x60/0xa0 [<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4 [<ffffff9008115568>] generic_handle_irq+0x30/0x40 [<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc [<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4 ... Memory state around the buggy address: ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by:
William Wu <william.wu@rock-chips.com> Signed-off-by:
-
Joël Esponde authored
[ Upstream commit 807c1625 ] With the S25FL127S nor flash part, each writing to the configuration register takes hundreds of ms. During that time, no more accesses to the flash should be done (even reads). This commit adds a wait loop after the register writing until the flash finishes its work. This issue could make rootfs mounting fail when the latter was done too much closely to this quad enable bit setting step. And in this case, a driver as UBIFS may try to recover the filesystem and may broke it completely. Signed-off-by:
Joël Esponde <joel.esponde@honeywell.com> Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by:
-
Tobias Wolf authored
[ Upstream commit 3ec75441 ] An empty __dtb_start to __dtb_end section might result in initial_boot_params being null for arch/mips/ralink. This showed that the boot process hangs indefinitely in of_scan_flat_dt(). Signed-off-by:
Tobias Wolf <dev-NTEO@vplace.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14605/Signed-off-by:
-
David Howells authored
[ Upstream commit 5f2f9765 ] This fixes CVE-2017-7482. When a kerberos 5 ticket is being decoded so that it can be loaded into an rxrpc-type key, there are several places in which the length of a variable-length field is checked to make sure that it's not going to overrun the available data - but the data is padded to the nearest four-byte boundary and the code doesn't check for this extra. This could lead to the size-remaining variable wrapping and the data pointer going over the end of the buffer. Fix this by making the various variable-length data checks use the padded length. Reported-by:
石磊 <shilei-c@360.cn> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.c.dionne@auristor.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit acfd6ee4 ] Fixes resume from suspend. bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121Reported-by:
Przemek <soprwa@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 4eb59793 ] Disable PX on these systems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491Signed-off-by:
-
Nicholas Bellinger authored
[ Upstream commit 73d4e580 ] This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED when a fabric driver drops it's second reference from below the target_core_tmr.c based callers of transport_cmd_finish_abort(). Recently with the conversion of kref to refcount_t, this bug was manifesting itself as: [705519.601034] refcount_t: underflow; use-after-free. [705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs [705539.719111] ------------[ cut here ]------------ [705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51 Since the original kref atomic_t based kref_put() didn't check for underflow and only invoked the final callback when zero was reached, this bug did not manifest in practice since all se_cmd memory is using preallocated tags. To address this, go ahead and propigate the existing return from transport_put_cmd() up via transport_cmd_finish_abort(), and change transport_cmd_finish_abort() + core_tmr_handle_tas_abort() callers to only do their local target_put_sess_cmd() if necessary. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Tested-by:
Gary Guo <ghg@datera.io> Tested-by:
Chu Yuan Lin <cyl@datera.io> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
John Stultz authored
[ Upstream commit ceea5e37 ] In tests, which excercise switching of clocksources, a NULL pointer dereference can be observed on AMR64 platforms in the clocksource read() function: u64 clocksource_mmio_readl_down(struct clocksource *c) { return ~(u64)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask; } This is called from the core timekeeping code via: cycle_now = tkr->read(tkr->clock); tkr->read is the cached tkr->clock->read() function pointer. When the clocksource is changed then tkr->clock and tkr->read are updated sequentially. The code above results in a sequential load operation of tkr->read and tkr->clock as well. If the store to tkr->clock hits between the loads of tkr->read and tkr->clock, then the old read() function is called with the new clock pointer. As a consequence the read() function dereferences a different data structure and the resulting 'reg' pointer can point anywhere including NULL. This problem was introduced when the timekeeping code was switched over to use struct tk_read_base. Before that, it was theoretically possible as well when the compiler decided to reload clock in the code sequence: now = tk->clock->read(tk->clock); Add a helper function which avoids the issue by reading tk_read_base->clock once into a local variable clk and then issue the read function via clk->read(clk). This guarantees that the read() function always gets the proper clocksource pointer handed in. Since there is now no use for the tkr.read pointer, this patch also removes it, and to address stopping the fast timekeeper during suspend/resume, it introduces a dummy clocksource to use rather then just a dummy read function. Signed-off-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: stable <stable@vger.kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Cc: Daniel Mentz <danielmentz@google.com> Link: http://lkml.kernel.org/r/1496965462-20003-2-git-send-email-john.stultz@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Daniel Drake authored
[ Upstream commit 817ae460 ] Without this quirk, the touchpad is not responsive on this product, with the following message repeated in the logs: psmouse serio1: bad data from KBC - timeout Add it to the notimeout list alongside other similar Fujitsu laptops. Signed-off-by:
Daniel Drake <drake@endlessm.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Naveen N. Rao authored
[ Upstream commit a9f8553e ] This fixes a crash when function_graph and jprobes are used together. This is essentially commit 237d28db ("ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing"), but for powerpc. Jprobes breaks function_graph tracing since the jprobe hook needs to use jprobe_return(), which never returns back to the hook, but instead to the original jprobe'd function. The solution is to momentarily pause function_graph tracing before invoking the jprobe hook and re-enable it when returning back to the original jprobe'd function. Fixes: 6794c782 ("powerpc64: port of the function graph tracer") Cc: stable@vger.kernel.org # v2.6.30+ Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Pavel Shilovsky authored
[ Upstream commit dcd87838 ] Downgrade the loglevel for SMB2 to prevent filling the log with messages if e.g. readdir was interrupted. Also make SMB2 and SMB1 codepaths do the same logging during readdir. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 46a704f8 ] If userspace attempts to call the KVM_RUN ioctl when it has hardware transactional memory (HTM) enabled, the values that it has put in the HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by guest values. To fix this, we detect this condition and save those SPR values in the thread struct, and disable HTM for the task. If userspace goes to access those SPRs or the HTM facility in future, a TM-unavailable interrupt will occur and the handler will reload those SPRs and re-enable HTM. If userspace has started a transaction and suspended it, we would currently lose the transactional state in the guest entry path and would almost certainly get a "TM Bad Thing" interrupt, which would cause the host to crash. To avoid this, we detect this case and return from the KVM_RUN ioctl with an EINVAL error, with the KVM exit reason set to KVM_EXIT_FAIL_ENTRY. Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Cc: stable@vger.kernel.org # v3.14+ Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Ilya Matveychikov authored
[ Upstream commit a91e0f68 ] When using get_options() it's possible to specify a range of numbers, like 1-100500. The problem is that it doesn't track array size while calling internally to get_range() which iterates over the range and fills the memory with numbers. Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.comSigned-off-by:
Ilya V. Matveychikov <matvejchikov@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
NeilBrown authored
[ Upstream commit 9fa4eb8e ] If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl, autofs4_d_automount() will return ERR_PTR(status) with that status to follow_automount(), which will then dereference an invalid pointer. So treat a positive status the same as zero, and map to ENOENT. See comment in systemd src/core/automount.c::automount_send_ready(). Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.nameSigned-off-by:
NeilBrown <neilb@suse.com> Cc: Ian Kent <raven@themaw.net> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 98da7d08 ] When limiting the argv/envp strings during exec to 1/4 of the stack limit, the storage of the pointers to the strings was not included. This means that an exec with huge numbers of tiny strings could eat 1/4 of the stack limit in strings and then additional space would be later used by the pointers to the strings. For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721 single-byte strings would consume less than 2MB of stack, the max (8MB / 4) amount allowed, but the pointers to the strings would consume the remaining additional stack space (1677721 * 4 == 6710884). The result (1677721 + 6710884 == 8388605) would exhaust stack space entirely. Controlling this stack exhaustion could result in pathological behavior in setuid binaries (CVE-2017-1000365). [akpm@linux-foundation.org: additional commenting from Kees] Fixes: b6a2fea3 ("mm: variable length argument support") Link: http://lkml.kernel.org/r/20170622001720.GA32173@beastSigned-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
-
Tomasz Wilczyński authored
[ Upstream commit b8e11f7d ] Commit 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by:
Tomasz Wilczyński <twilczynski@naver.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.10+ <stable@vger.kernel.org> # 3.10+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
