- 27 Sep, 2006 40 commits
-
-
Mike Isely authored
The polling interval for the device can't always be 1msec. If it is too quick, the device can fail causing a fatal (to the driver) EILSEQ error from the USB core. The actual correct value is reported by the device as part of its configuration data, so use that value as the default. On a DeLorme Earthmate for example, the device reports that it wants a 6msec interval. As part of this fix, the "interval" module option has been fixed as well; the device's default can be overridden by specifying interval=<value> as a module option. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by: -
Alan Stern authored
This patch (as786) removes a redundant test and fixes a problem involving repeated system sleeps when CONFIG_USB_SUSPEND is not set. During the first wakeup, the root hub's dev.power.power_state.event field doesn't get updated, causing it not to be suspended during the second sleep transition. This takes care of the issue raised by Rafael J. Wysocki and Mattia Dongili. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as740) removes the existing support for autosuspend of root hubs. That support fit in rather awkwardly with the rest of usbcore and it was used only by ohci-hcd. It won't be needed any more since the hub driver will take care of autosuspending all hubs, root or external. Signed-off-by:
-
Alan Stern authored
This patch (as741) makes the non-hub parts of usbcore actually use the autosuspend facilities added by an earlier patch. Devices opened through usbfs are autoresumed and then autosuspended upon close. Likewise for usb-skeleton. Devices are autoresumed for usb_set_configuration. Signed-off-by:
-
Alan Stern authored
This patch (as739) adds the basic infrastructure for USB autosuspend and autoresume. The main features are: PM usage counters added to struct usb_device and struct usb_interface, indicating whether it's okay to autosuspend them or they are currently in use. Flag added to usb_device indicating whether the current suspend/resume operation originated from outside or as an autosuspend/autoresume. Flag added to usb_driver indicating whether the driver supports autosuspend. If not, no device bound to the driver will be autosuspended. Mutex added to usb_device for protecting PM operations. Unlike the device semaphore, the locking rule for the pm_mutex is that you must acquire the locks going _up_ the device tree. New routines handling autosuspend/autoresume requests for interfaces and devices. Suspend and resume requests are propagated up the device tree (but not outside the USB subsystem). work_struct added to usb_device, for carrying out delayed autosuspend requests. Autoresume added (and autosuspend prevented) during probe and disconnect. Signed-off-by:
-
Alan Stern authored
This patch (as778) adds a field to struct usb_device to store the device's level in the USB tree. In itself this number isn't really important. But the overhead is very low, and in a later patch it will be used for preventing bogus warnings from the lockdep checker. Signed-off-by:
-
Pete Zaitcev authored
The command "cdrecord dev=/dev/uba x.iso" prints nasty garbage if a blank is not in the drive. This happens because drivers have to set req->errors separately from just returning zero uptodate with end_that_request_first, end_that_request_last. These functions only set error in BIO, but sg_io() ignores it. Since we're on it, let cdrecord access a device when ->changed is set. It's useful if someone wants to know device capabilities without burning anything. Signed-Off-By:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Reiner Herrmann authored
Replace spaces with tab and change comment indention for better readability. Signed-off-by:
Reiner Herrmann <reiner@reiner-h.de> Signed-off-by:
-
David Brownell authored
This includes two one-liners forwarded to me for the OHCI support on at91: - KB920x (and other boards with CPUs in non-BGA packages) need a slightly different way to say "ignore that port, it's not pinned out"; - On resume, if we turn clocks on, record that we did so. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
This updates the code handling dma-coherent buffer allocations, basically reusing code from the musb_hdrc driver. Instead of trying to work around two significant limitations of the dma framework (memory wastage for buffers smaller than a page, and inconsistency between calling context requirements for allocation and free) this just works around one of them (the latter). So count this as two steps forward (bugfixes: the latter issue could cause errors on some platforms, and some MIPS changes broke code for the former), and one step back (increasing cross-platform memory wastage). Plus linelength and whitespace fixes; and minor data segment shrinkage. Signed-off-by:
-
Eugeny S. Mints authored
Adjust dev->dev_lock spinlock lock/unlock calls to be safe for SMP case. Otherwise the following sequence may lead to a deadlock in SMP case: gs_send()->usb_ep_queue() ->(in case a request is satisfied immediatly) gs_write_complete() for ex for pxa2xx_udc.c: usb_ep_queue()->pxa2xx_ep_queue()->write_fifo()->done()->gs_write_complete() (through req.complete pointer) Signed-off-by:
Eugeny S. Mints <emints@ru.mvista.com> Acked-by:
-
Matthew Dharm authored
Replaced kernel_thread() with kthread_run() since kernel_thread() is deprecated in drivers/modules. Signed-off-by:
Cedric Le Goater <clg@fr.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Skip Hansen authored
For ep0out transfers (rare), be sure to copy the right data to userspace. Signed-off-by:
-
David Brownell authored
[ ... when you have an editor set to remind you of whitespace bugs ... ] Cosmetic EHCI changes: remove end-of-line whitespace, spaces before tabs. Signed-off-by:
-
David Brownell authored
For systems using the Mentor HDRC controllers we get better TX DMA throughput if we can avoid falling back to PIO to write zero length packets ... so tell the driver to avoid ZLPs. Signed-off-by:
-
Alan Stern authored
This patch (as755b) fixes a bug in usbmon. Rather than assuming all USB host controllers use DMA, the code will check the usb_bus data structure. If DMA isn't used, we don't want to try peeking into a non-existent DMA buffer! Signed-off-by:
-
Alan Stern authored
As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by:
-
Alan Stern authored
This patch (as770b) introduces a new field to usb_bus: a flag indicating whether or not the host controller uses DMA. This serves to encapsulate the computation. It also means we will have only one spot to update if the DMA API changes. Signed-off-by:
-
Alan Stern authored
All of the currently-supported USB host controller drivers use the HCD bus-glue framework. As part of the program for flattening out the glue layer, this patch (as769) removes the usb_operations structure. All function calls now go directly to the HCD routines (slightly renamed to remain within the "usb_" namespace). The patch also removes usb_alloc_bus(), because it's not useful in the HCD framework and it wasn't referenced anywhere. Signed-off-by:
-
Andrew Morton authored
Fix CONFIG_PM=n build. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Alexey Dobriyan authored
drivers/usb/core/hub.c: In function `hub_events': drivers/usb/core/hub.c:2591: warning: statement with no effect Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alan Stern authored
It's generally a bad idea for USB interface drivers to try to change a device's configuration, and usbcore doesn't provide any way for them to do it. However in a few exceptional circumstances it can make sense. This patch (as767) adds a roundabout mechanism to help drivers that may need it. Signed-off-by:
-
Alan Stern authored
The UFI specification doesn't permit devices to indicate non-existent LUNs in the manner prescribed by the SCSI spec. This patch (as773) sets a special flag so that the SCSI scanner will recognize these devices and treat them specially. Signed-off-by:
-
Jules Villard authored
This tiny patch fixes a typo in drivers/usb/gadget/Kconfig. The typo is present in 2.6.18-rc4 and in the corresponding -mm tree (and AFAIK, FYI and FWIW was present in previous kernel versions as well). From: Jules Villard <jvillard@ens-lyon.fr> Signed-off-by: -
Eric Sesterhenn authored
another gcc 4.1 signdness warning: drivers/usb/gadget/ether.c:2028: warning: comparison of unsigned expression < 0 is always false length is assigned the value of usb_ep_queue() which returns an int. Directly after this it is checked for < 0, which can never be true. Making length an int makes the error check work again. Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
This patch marks some USB core's functions parameters as const. This improves the design (we're saying to the caller that its parameter is not going to be modified) and may help in compiler's optimisation work. Signed-off-by:
Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Inaky Perez-Gonzalez authored
New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by:
Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by:
-
Inaky Perez-Gonzalez authored
This patch teaches the USB stack handling of WUSB devices (those whose speed is USB_SPEED_VARIABLE). For these devices, we need to set ep0's maxpacketsize to 512 (even though the device descriptor reports it as 0xff). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by:
-
Inaky Perez-Gonzalez authored
This patch enables the USB stack to recognize WUSB devices (from a WUSB HCD) and assigns them the proper speed setting (USB_SPEED_VARIABLE). 1. Introduce usb_hcd->wireless to mark a host controller instance as being wireless, and thus having wireless 'fake' ports. [discarded previous model of using a reserved bit in the port_stat struct to do this; thanks to Alan Stern for indicating the proper way to do it]. 2. Introduce hub.c:hub_is_wusb() that tests if a hub is a WUSB root hub (WUSB doesn't have non-root hubs). New code being pushed to linuxuwb.org requires this patch to connect WUSB devices. Signed-off-by:
-
Inaky Perez-Gonzalez authored
Change usb_get_configuration() so that it is more tolerant to devices with bad configuration descriptors (it'll make it ignore configurations that fail to load). Signed-off-by:
-
Matthew Dharm authored
This changeset from Keith Bennett (via Bob Copeland) moves the Karma initializer to its own file and adds trapping of the START_STOP command to enable eject of the device. Signed-off-by:
Keith Bennett <keith@mcs.st-and.ac.uk> Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Luiz Fernando N. Capitulino authored
o CodingStyle fixes o Removes trailing spaces o Do not make not needed initialiation of automatic variables o Use usb_endpoint_* functions o If we get an error in the write URB callback print an error message instead of a debug one (Pretty unrelated changes, but spliting this up doesn't pay off as our main changes are just CodingStyle fixes). Signed-off-by:
-
Alan Stern authored
We don't want khubd to start interfering in the device-resume process merely because the PORT_STATUS_C_SUSPEND feature happens to be set. Ports need to be marked as busy while a resume is taking place. In addition, so long as ports are marked as busy, khubd won't be able to clear their various status-change features. On an interrupt-driven root hub this could lead to an interrupt storm. Root hub IRQs should not be re-enabled until the busy_bits value is equal to 0. This patch (as765) fixes these two potential problems. Signed-off-by:
-
