- 01 Nov, 2015 1 commit
-
-
Ondrej Zary authored
Enable I2S docking for Dell Latitude C810. This allows the audio output on C/Port II to work (and probably also the audio inputs on C/Dock II). The volume can't be adjusted - none of the mixer controls currently supported affects the I2S output (they belong to the STAC9721/23 AC'97 codec responsible for the laptop internal connectors & speakers). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 30 Oct, 2015 5 commits
-
-
Takashi Sakamoto authored
Digi 002/003 family uses two ways to transfer MIDI messages. They're different mechanisms, while it's better to handle the ways in different ALSA rawmidi character devices because one character device has just a set of operations. This commit adds another rawmidi character device for control MIDI port. As a result, first rawmidi character device is just for MIDI messages transferred by isochronous packets. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
Digi 002/003 family has two types of MIDI port; one is for physical MIDI port and another is for MIDI control message. The former is transferred in isochronous packet, and the latter is transferred by asynchronous transaction. These transmission mechanisms are completely different, while current ALSA digi00x driver defines a set of operations for them with several condition statements. As a result, codes for the operation are messy. This commit adds a set of MIDI operation for control MIDI ports. In later commit, it's applied as an operation for ALSA rawmidi character device. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Sakamoto authored
In following commit, new functions and variables are added for operations of MIDI control port. This commit is a preparation. Current identifiers are renamed so that they mean physical MIDI ports. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ondrej Zary authored
snd_cs46xx_suspend() is missing snd_pcm_suspend_all calls for pcm_rear, pcm_center_lfe and pcm_iec958. There's also a copy/paste bug in snd_cs46xx_pcm_iec958(), overwriting pcm_rear in struct snd_cs46xx, leaving pcm_iec958 unused. Fix all this to allow all channels to survive suspend/resume. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Ondrej Zary authored
Currently, the Duplicate front control is enabled only for two specific revisions of CS4294. Enable it for all CS4294 and CS4298 codecs instead. This fixes rear output on my VC-4620N sound card (CS4620 + CS4298 rev.5). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Oct, 2015 3 commits
-
-
Takashi Iwai authored
These have been missing in the template file although they provide good kernel doc comments. Let's add them. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Give some readable comment in kernel doc style for each exported function, as I promised in the previous meetings. While we're at it, fix the wrong comments, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Lars-Peter Clausen authored
The ALSA core does not modify the constraints provided by a driver. Most constraint helper functions already take a const pointer to the constraint description, the exception at the moment being the ratden and ratnum constraints. Make those const as well, this allows a driver to declare them as const. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 26 Oct, 2015 21 commits
-
-
Takashi Iwai authored
Use codec_*() macro instead of pr_*() for improving the log information. The current form even slips from alsa-info.sh. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Merge tag 'asoc-v4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v4.4 Not much core work here, a few small tweaks to interfaces but mainly the changes here are driver ones. Highlights include: - Updates to the topology userspace interface - Big updates to the Renesas support from Morimoto-san - Most of the support for Intel Sky Lake systems. - New drivers for Asahi Kasei Microdevices AK4613, Allwinnner A10, Cirrus Logic WM8998, Dialog DA7219, Nuvoton NAU8825 and Rockchip S/PDIF. - A new driver for the Atmel Class D speaker drivers
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/wm8904', 'asoc/topic/wm8955' and 'asoc/topic/wm8960' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/topology', 'asoc/topic/wm2000', 'asoc/topic/wm8731' and 'asoc/topic/wm8903' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/rt298', 'asoc/topic/rt5640', 'asoc/topic/samsung' and 'asoc/topic/sh' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/rcar', 'asoc/topic/rl6347a', 'asoc/topic/rockchip' and 'asoc/topic/rt286' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/es8328', 'asoc/topic/fsl' and 'asoc/topic/fsl-card' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
ASoC: Updates for v4.4 A first batch of updates targetted at v4.4. There are no substantial core fixes here, the biggest block of changes is updates to the rcar drivers and the addition of a CODEC driver for the AK4613. # gpg: Signature made Fri 25 Sep 2015 05:37:06 KST using RSA key ID 5D5487D0 # gpg: key CD7BEEBC: no public key for trusted key - skipped # gpg: key CD7BEEBC marked as ultimately trusted # gpg: key AF88CD16: no public key for trusted key - skipped # gpg: key AF88CD16 marked as ultimately trusted # gpg: key 16005C11: no public key for trusted key - skipped # gpg: key 16005C11 marked as ultimately trusted # gpg: key 5621E907: no public key for trusted key - skipped # gpg: key 5621E907 marked as ultimately trusted # gpg: key 5C6153AD: no public key for trusted key - skipped # gpg: key 5C6153AD marked as ultimately trusted # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
Nicolin Chen authored
Change them to #ifdef as CONFIG_PM_SLEEP might not be defined at all. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'topic/fsl-mega-fast' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-fsl
-
Axel Lin authored
So we have consistent order for register bit defines. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 25 Oct, 2015 1 commit
-
-
Linus Torvalds authored
-
- 23 Oct, 2015 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are three xhci driver fixes for reported issues for 4.3-rc7 All have been in linux-next for a while with no problems" * tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Add spurious wakeup quirk for LynxPoint-LP controllers xhci: handle no ping response error properly xhci: don't finish a TD if we get a short transfer event mid TD
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are two fixes that resolve reported issues, one with the 8250 driver, and the other with the generic fbcon driver. Both have been in linux-next for a while" * tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: initialize blink interval before calling fb_set_par Revert "serial: 8250_dma: don't bother DMA with small transfers"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are four iio driver fixes for 4.3-rc7, fixing some reported issues. All of these have been in linux-next for a while" * tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mxs-lradc: Fix temperature offset iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb() iio: st_accel: fix interrupt handling on LIS3LV02 iio: adc: twl4030: Fix ADC[3:6] readings
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull infiniband fixes from Doug Ledford: "It's late in the game, I know, but these fixes seemed important enough to warrant a late pull request. They all involve oopses or use after frees or corruptions. Six serious fixes: - Hold the mutex around the find and corresponding update of our gid - The ifa list is rcu protected, copy its contents under rcu to avoid using a freed structure - On error, netdev might be null, so check it before trying to release it - On init, if workqueue alloc fails, fail init - The new demux patches exposed a bug in mlx5 and ipath drivers, we need to use the payload P_Key to determine the P_Key the packet arrived on because the hardware doesn't tell us the truth - Due to a couple convoluted error flows, it is possible for the CM to trigger a use_after_free and a double_free of rb nodes. Add two checks to prevent that. This code has worked for 10+ years. It is likely that some of the recent changes have caused this issue to surface. The current patch will protect us from nasty events for now while we track down why this is just now showing up" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/cm: Fix rb-tree duplicate free and use-after-free IB/cma: Use inner P_Key to determine netdev IB/ucma: check workqueue allocation before usage IB/cma: Potential NULL dereference in cma_id_from_event IB/core: Fix use after free of ifa IB/core: Fix memory corruption in ib_cache_gid_set_default_gid
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: "Three stable fixes (two in btree code used by DM thinp and one to properly store flags in DM cache metadata's superblock)" * tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: the CLEAN_SHUTDOWN flag was not being set dm btree: fix leak of bufio-backed block in btree_split_beneath error path dm btree remove: fix a bug when rebalancing nodes after removal
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "A final set of fixes for 4.3. It is (again) bigger than I would have liked, but it's all been through the testing mill and has been carefully reviewed by multiple parties. Each fix is either a regression fix for this cycle, or is marked stable. You can scold me at KS. The pull request contains: - Three simple fixes for NVMe, fixing regressions since 4.3. From Arnd, Christoph, and Keith. - A single xen-blkfront fix from Cathy, fixing a NULL dereference if an error is returned through the staste change callback. - Fixup for some bad/sloppy code in nbd that got introduced earlier in this cycle. From Markus Pargmann. - A blk-mq tagset use-after-free fix from Junichi. - A backing device lifetime fix from Tejun, fixing a crash. - And finally, a set of regression/stable fixes for cgroup writeback from Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: remove broken rbtree_postorder_for_each_entry_safe() usage in cgwb_bdi_destroy() NVMe: Fix memory leak on retried commands block: don't release bdi while request_queue has live references nvme: use an integer value to Linux errno values blk-mq: fix use-after-free in blk_mq_free_tag_set() nvme: fix 32-bit build warning writeback: fix incorrect calculation of available memory for memcg domains writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions writeback: bdi_writeback iteration must not skip dying ones writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback() writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration nbd: Add locking for tasks xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "Two fixes. One is a stopgap to prevent a stack blowout when users have a deep chain of image clones. (We'll rewrite this code to be non-recursive for the next window, but in the meantime this is a simple fix that avoids a crash.) The second fixes a refcount underflow" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: prevent kernel stack blow up on rbd map rbd: don't leak parent_spec in rbd_dev_probe_parent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "I have two more small fixes this week: Qu's fix avoids unneeded COW during fallocate, and Christian found a memory leak in the error handling of an earlier fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix possible leak in btrfs_ioctl_balance() btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size
-
Maruthi Srinivas Bayyavarapu authored
DW i2s controller's master/slave config can be read from a read-only register. Machine driver can try to set a master/slave format on cpu-dai using 'set_fmt' of dai ops. A check is added to verify codec is master when dwc is slave and vice-versa. Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-