1. 04 Apr, 2016 3 commits
  2. 25 Mar, 2016 1 commit
  3. 22 Mar, 2016 4 commits
  4. 21 Mar, 2016 1 commit
    • Chris Mason's avatar
      btrfs: make sure we stay inside the bvec during __btrfs_lookup_bio_sums · 389f239c
      Chris Mason authored
      Commit c40a3d38 (Btrfs: Compute and look up csums based on
      sectorsized blocks) changes around how we walk the bios while looking up
      crcs.  There's an inner loop that is jumping to the next bvec based on
      sectors and before it derefs the next bvec, it needs to make sure we're
      still in the bio.
      
      In this case, the outer loop would have decided to stop moving forward
      too, and the bvec deref is never actually used for anything.  But
      CONFIG_DEBUG_PAGEALLOC catches it because we're outside our bio.
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
      389f239c
  5. 14 Mar, 2016 2 commits
  6. 11 Mar, 2016 6 commits
  7. 01 Mar, 2016 8 commits
    • Filipe Manana's avatar
      Btrfs: do not collect ordered extents when logging that inode exists · 5e33a2bd
      Filipe Manana authored
      When logging that an inode exists, for example as part of a directory
      fsync operation, we were collecting any ordered extents for the inode but
      we ended up doing nothing with them except tagging them as processed, by
      setting the flag BTRFS_ORDERED_LOGGED on them, which prevented a
      subsequent fsync of that inode (using the LOG_INODE_ALL mode) from
      collecting and processing them. This created a time window where a second
      fsync against the inode, using the fast path, ended up not logging the
      checksums for the new extents but it logged the extents since they were
      part of the list of modified extents. This happened because the ordered
      extents were not collected and checksums were not yet added to the csum
      tree - the ordered extents have not gone through btrfs_finish_ordered_io()
      yet (which is where we add them to the csum tree by calling
      inode.c:add_pending_csums()).
      
      So fix this by not collecting an inode's ordered extents if we are logging
      it with the LOG_INODE_EXISTS mode.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      5e33a2bd
    • Filipe Manana's avatar
      Btrfs: fix race when checking if we can skip fsync'ing an inode · affc0ff9
      Filipe Manana authored
      If we're about to do a fast fsync for an inode and btrfs_inode_in_log()
      returns false, it's possible that we had an ordered extent in progress
      (btrfs_finish_ordered_io() not run yet) when we noticed that the inode's
      last_trans field was not greater than the id of the last committed
      transaction, but shortly after, before we checked if there were any
      ongoing ordered extents, the ordered extent had just completed and
      removed itself from the inode's ordered tree, in which case we end up not
      logging the inode, losing some data if a power failure or crash happens
      after the fsync handler returns and before the transaction is committed.
      
      Fix this by checking first if there are any ongoing ordered extents
      before comparing the inode's last_trans with the id of the last committed
      transaction - when it completes, an ordered extent always updates the
      inode's last_trans before it removes itself from the inode's ordered
      tree (at btrfs_finish_ordered_io()).
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      affc0ff9
    • Filipe Manana's avatar
      Btrfs: fix listxattrs not listing all xattrs packed in the same item · daac7ba6
      Filipe Manana authored
      In the listxattrs handler, we were not listing all the xattrs that are
      packed in the same btree item, which happens when multiple xattrs have
      a name that when crc32c hashed produce the same checksum value.
      
      Fix this by processing them all.
      
      The following test case for xfstests reproduces the issue:
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
        tmp=/tmp/$$
        status=1	# failure is the default!
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        _cleanup()
        {
            cd /
            rm -f $tmp.*
        }
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
        . ./common/attr
      
        # real QA test starts here
        _supported_fs generic
        _supported_os Linux
        _require_scratch
        _require_attrs
      
        rm -f $seqres.full
      
        _scratch_mkfs >>$seqres.full 2>&1
        _scratch_mount
      
        # Create our test file with a few xattrs. The first 3 xattrs have a name
        # that when given as input to a crc32c function result in the same checksum.
        # This made btrfs list only one of the xattrs through listxattrs system call
        # (because it packs xattrs with the same name checksum into the same btree
        # item).
        touch $SCRATCH_MNT/testfile
        $SETFATTR_PROG -n user.foobar -v 123 $SCRATCH_MNT/testfile
        $SETFATTR_PROG -n user.WvG1c1Td -v qwerty $SCRATCH_MNT/testfile
        $SETFATTR_PROG -n user.J3__T_Km3dVsW_ -v hello $SCRATCH_MNT/testfile
        $SETFATTR_PROG -n user.something -v pizza $SCRATCH_MNT/testfile
        $SETFATTR_PROG -n user.ping -v pong $SCRATCH_MNT/testfile
      
        # Now call getfattr with --dump, which calls the listxattrs system call.
        # It should list all the xattrs we have set before.
        $GETFATTR_PROG --absolute-names --dump $SCRATCH_MNT/testfile | _filter_scratch
      
        status=0
        exit
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      daac7ba6
    • Filipe Manana's avatar
      Btrfs: fix deadlock between direct IO reads and buffered writes · ade77029
      Filipe Manana authored
      While running a test with a mix of buffered IO and direct IO against
      the same files I hit a deadlock reported by the following trace:
      
      [11642.140352] INFO: task kworker/u32:3:15282 blocked for more than 120 seconds.
      [11642.142452]       Not tainted 4.4.0-rc6-btrfs-next-21+ #1
      [11642.143982] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [11642.146332] kworker/u32:3   D ffff880230ef7988 [11642.147737] systemd-journald[571]: Sent WATCHDOG=1 notification.
      [11642.149771]     0 15282      2 0x00000000
      [11642.151205] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
      [11642.154074]  ffff880230ef7988 0000000000000246 0000000000014ec0 ffff88023ec94ec0
      [11642.156722]  ffff880233fe8f80 ffff880230ef8000 ffff88023ec94ec0 7fffffffffffffff
      [11642.159205]  0000000000000002 ffffffff8147b7f9 ffff880230ef79a0 ffffffff8147b541
      [11642.161403] Call Trace:
      [11642.162129]  [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f
      [11642.163396]  [<ffffffff8147b541>] schedule+0x82/0x9a
      [11642.164871]  [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109
      [11642.167020]  [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f
      [11642.167931]  [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197
      [11642.182320]  [<ffffffff8108affa>] ? trace_hardirqs_on+0xd/0xf
      [11642.183762]  [<ffffffff810b079b>] ? timekeeping_get_ns+0xe/0x33
      [11642.185308]  [<ffffffff810b0f61>] ? ktime_get+0x41/0x52
      [11642.186782]  [<ffffffff8147ac08>] io_schedule_timeout+0xa0/0x102
      [11642.188217]  [<ffffffff8147ac08>] ? io_schedule_timeout+0xa0/0x102
      [11642.189626]  [<ffffffff8147b814>] bit_wait_io+0x1b/0x39
      [11642.190803]  [<ffffffff8147bb21>] __wait_on_bit_lock+0x4c/0x90
      [11642.192158]  [<ffffffff8111829f>] __lock_page+0x66/0x68
      [11642.193379]  [<ffffffff81082f29>] ? autoremove_wake_function+0x3a/0x3a
      [11642.194831]  [<ffffffffa0450ddd>] lock_page+0x31/0x34 [btrfs]
      [11642.197068]  [<ffffffffa0454e3b>] extent_write_cache_pages.isra.19.constprop.35+0x1af/0x2f4 [btrfs]
      [11642.199188]  [<ffffffffa0455373>] extent_writepages+0x4b/0x5c [btrfs]
      [11642.200723]  [<ffffffffa043c913>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
      [11642.202465]  [<ffffffffa043aa82>] btrfs_writepages+0x28/0x2a [btrfs]
      [11642.203836]  [<ffffffff811236bc>] do_writepages+0x23/0x2c
      [11642.205624]  [<ffffffff811198c9>] __filemap_fdatawrite_range+0x5a/0x61
      [11642.207057]  [<ffffffff81119946>] filemap_fdatawrite_range+0x13/0x15
      [11642.208529]  [<ffffffffa044f87e>] btrfs_start_ordered_extent+0xd0/0x1a1 [btrfs]
      [11642.210375]  [<ffffffffa0462613>] ? btrfs_scrubparity_helper+0x140/0x33a [btrfs]
      [11642.212132]  [<ffffffffa044f974>] btrfs_run_ordered_extent_work+0x25/0x34 [btrfs]
      [11642.213837]  [<ffffffffa046262f>] btrfs_scrubparity_helper+0x15c/0x33a [btrfs]
      [11642.215457]  [<ffffffffa046293b>] btrfs_flush_delalloc_helper+0xe/0x10 [btrfs]
      [11642.217095]  [<ffffffff8106483e>] process_one_work+0x256/0x48b
      [11642.218324]  [<ffffffff81064f20>] worker_thread+0x1f5/0x2a7
      [11642.219466]  [<ffffffff81064d2b>] ? rescuer_thread+0x289/0x289
      [11642.220801]  [<ffffffff8106a500>] kthread+0xd4/0xdc
      [11642.222032]  [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24
      [11642.223190]  [<ffffffff8147fdef>] ret_from_fork+0x3f/0x70
      [11642.224394]  [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24
      [11642.226295] 2 locks held by kworker/u32:3/15282:
      [11642.227273]  #0:  ("%s-%s""btrfs", name){++++.+}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b
      [11642.229412]  #1:  ((&work->normal_work)){+.+.+.}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b
      [11642.231414] INFO: task kworker/u32:8:15289 blocked for more than 120 seconds.
      [11642.232872]       Not tainted 4.4.0-rc6-btrfs-next-21+ #1
      [11642.234109] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [11642.235776] kworker/u32:8   D ffff88020de5f848     0 15289      2 0x00000000
      [11642.237412] Workqueue: writeback wb_workfn (flush-btrfs-481)
      [11642.238670]  ffff88020de5f848 0000000000000246 0000000000014ec0 ffff88023ed54ec0
      [11642.240475]  ffff88021b1ece40 ffff88020de60000 ffff88023ed54ec0 7fffffffffffffff
      [11642.242154]  0000000000000002 ffffffff8147b7f9 ffff88020de5f860 ffffffff8147b541
      [11642.243715] Call Trace:
      [11642.244390]  [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f
      [11642.245432]  [<ffffffff8147b541>] schedule+0x82/0x9a
      [11642.246392]  [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109
      [11642.247479]  [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f
      [11642.248551]  [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197
      [11642.249968]  [<ffffffff8108affa>] ? trace_hardirqs_on+0xd/0xf
      [11642.251043]  [<ffffffff810b079b>] ? timekeeping_get_ns+0xe/0x33
      [11642.252202]  [<ffffffff810b0f61>] ? ktime_get+0x41/0x52
      [11642.253210]  [<ffffffff8147ac08>] io_schedule_timeout+0xa0/0x102
      [11642.254307]  [<ffffffff8147ac08>] ? io_schedule_timeout+0xa0/0x102
      [11642.256118]  [<ffffffff8147b814>] bit_wait_io+0x1b/0x39
      [11642.257131]  [<ffffffff8147bb21>] __wait_on_bit_lock+0x4c/0x90
      [11642.258200]  [<ffffffff8111829f>] __lock_page+0x66/0x68
      [11642.259168]  [<ffffffff81082f29>] ? autoremove_wake_function+0x3a/0x3a
      [11642.260516]  [<ffffffffa0450ddd>] lock_page+0x31/0x34 [btrfs]
      [11642.261841]  [<ffffffffa0454e3b>] extent_write_cache_pages.isra.19.constprop.35+0x1af/0x2f4 [btrfs]
      [11642.263531]  [<ffffffffa0455373>] extent_writepages+0x4b/0x5c [btrfs]
      [11642.264747]  [<ffffffffa043c913>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
      [11642.266148]  [<ffffffffa043aa82>] btrfs_writepages+0x28/0x2a [btrfs]
      [11642.267264]  [<ffffffff811236bc>] do_writepages+0x23/0x2c
      [11642.268280]  [<ffffffff81192a2b>] __writeback_single_inode+0xda/0x5ba
      [11642.269407]  [<ffffffff811939f0>] writeback_sb_inodes+0x27b/0x43d
      [11642.270476]  [<ffffffff81193c28>] __writeback_inodes_wb+0x76/0xae
      [11642.271547]  [<ffffffff81193ea6>] wb_writeback+0x19e/0x41c
      [11642.272588]  [<ffffffff81194821>] wb_workfn+0x201/0x341
      [11642.273523]  [<ffffffff81194821>] ? wb_workfn+0x201/0x341
      [11642.274479]  [<ffffffff8106483e>] process_one_work+0x256/0x48b
      [11642.275497]  [<ffffffff81064f20>] worker_thread+0x1f5/0x2a7
      [11642.276518]  [<ffffffff81064d2b>] ? rescuer_thread+0x289/0x289
      [11642.277520]  [<ffffffff81064d2b>] ? rescuer_thread+0x289/0x289
      [11642.278517]  [<ffffffff8106a500>] kthread+0xd4/0xdc
      [11642.279371]  [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24
      [11642.280468]  [<ffffffff8147fdef>] ret_from_fork+0x3f/0x70
      [11642.281607]  [<ffffffff8106a42c>] ? kthread_parkme+0x24/0x24
      [11642.282604] 3 locks held by kworker/u32:8/15289:
      [11642.283423]  #0:  ("writeback"){++++.+}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b
      [11642.285629]  #1:  ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff8106474d>] process_one_work+0x165/0x48b
      [11642.287538]  #2:  (&type->s_umount_key#37){+++++.}, at: [<ffffffff81171217>] trylock_super+0x1b/0x4b
      [11642.289423] INFO: task fdm-stress:26848 blocked for more than 120 seconds.
      [11642.290547]       Not tainted 4.4.0-rc6-btrfs-next-21+ #1
      [11642.291453] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [11642.292864] fdm-stress      D ffff88022c107c20     0 26848  26591 0x00000000
      [11642.294118]  ffff88022c107c20 000000038108affa 0000000000014ec0 ffff88023ed54ec0
      [11642.295602]  ffff88013ab1ca40 ffff88022c108000 ffff8800b2fc19d0 00000000000e0fff
      [11642.297098]  ffff8800b2fc19b0 ffff88022c107c88 ffff88022c107c38 ffffffff8147b541
      [11642.298433] Call Trace:
      [11642.298896]  [<ffffffff8147b541>] schedule+0x82/0x9a
      [11642.299738]  [<ffffffffa045225d>] lock_extent_bits+0xfe/0x1a3 [btrfs]
      [11642.300833]  [<ffffffff81082eef>] ? add_wait_queue_exclusive+0x44/0x44
      [11642.301943]  [<ffffffffa0447516>] lock_and_cleanup_extent_if_need+0x68/0x18e [btrfs]
      [11642.303270]  [<ffffffffa04485ba>] __btrfs_buffered_write+0x238/0x4c1 [btrfs]
      [11642.304552]  [<ffffffffa044b50a>] ? btrfs_file_write_iter+0x17c/0x408 [btrfs]
      [11642.305782]  [<ffffffffa044b682>] btrfs_file_write_iter+0x2f4/0x408 [btrfs]
      [11642.306878]  [<ffffffff8116e298>] __vfs_write+0x7c/0xa5
      [11642.307729]  [<ffffffff8116e7d1>] vfs_write+0x9d/0xe8
      [11642.308602]  [<ffffffff8116efbb>] SyS_write+0x50/0x7e
      [11642.309410]  [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b
      [11642.310403] 3 locks held by fdm-stress/26848:
      [11642.311108]  #0:  (&f->f_pos_lock){+.+.+.}, at: [<ffffffff811877e8>] __fdget_pos+0x3a/0x40
      [11642.312578]  #1:  (sb_writers#11){.+.+.+}, at: [<ffffffff811706ee>] __sb_start_write+0x5f/0xb0
      [11642.314170]  #2:  (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa044b401>] btrfs_file_write_iter+0x73/0x408 [btrfs]
      [11642.316796] INFO: task fdm-stress:26849 blocked for more than 120 seconds.
      [11642.317842]       Not tainted 4.4.0-rc6-btrfs-next-21+ #1
      [11642.318691] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [11642.319959] fdm-stress      D ffff8801964ffa68     0 26849  26591 0x00000000
      [11642.321312]  ffff8801964ffa68 00ff8801e9975f80 0000000000014ec0 ffff88023ed94ec0
      [11642.322555]  ffff8800b00b4840 ffff880196500000 ffff8801e9975f20 0000000000000002
      [11642.323715]  ffff8801e9975f18 ffff8800b00b4840 ffff8801964ffa80 ffffffff8147b541
      [11642.325096] Call Trace:
      [11642.325532]  [<ffffffff8147b541>] schedule+0x82/0x9a
      [11642.326303]  [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109
      [11642.327180]  [<ffffffff8108ae40>] ? mark_held_locks+0x5e/0x74
      [11642.328114]  [<ffffffff8147f30e>] ? _raw_spin_unlock_irq+0x2c/0x4a
      [11642.329051]  [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197
      [11642.330053]  [<ffffffff8147bceb>] __wait_for_common+0x109/0x147
      [11642.330952]  [<ffffffff8147bceb>] ? __wait_for_common+0x109/0x147
      [11642.331869]  [<ffffffff8147e7bb>] ? usleep_range+0x4a/0x4a
      [11642.332925]  [<ffffffff81074075>] ? wake_up_q+0x47/0x47
      [11642.333736]  [<ffffffff8147bd4d>] wait_for_completion+0x24/0x26
      [11642.334672]  [<ffffffffa044f5ce>] btrfs_wait_ordered_extents+0x1c8/0x217 [btrfs]
      [11642.335858]  [<ffffffffa0465b5a>] btrfs_mksubvol+0x224/0x45d [btrfs]
      [11642.336854]  [<ffffffff81082eef>] ? add_wait_queue_exclusive+0x44/0x44
      [11642.337820]  [<ffffffffa0465edb>] btrfs_ioctl_snap_create_transid+0x148/0x17a [btrfs]
      [11642.339026]  [<ffffffffa046603b>] btrfs_ioctl_snap_create_v2+0xc7/0x110 [btrfs]
      [11642.340214]  [<ffffffffa0468582>] btrfs_ioctl+0x590/0x27bd [btrfs]
      [11642.341123]  [<ffffffff8147dc00>] ? mutex_unlock+0xe/0x10
      [11642.341934]  [<ffffffffa00fa6e9>] ? ext4_file_write_iter+0x2a3/0x36f [ext4]
      [11642.342936]  [<ffffffff8108895d>] ? __lock_is_held+0x3c/0x57
      [11642.343772]  [<ffffffff81186a1d>] ? rcu_read_unlock+0x3e/0x5d
      [11642.344673]  [<ffffffff8117dc95>] do_vfs_ioctl+0x458/0x4dc
      [11642.346024]  [<ffffffff81186bbe>] ? __fget_light+0x62/0x71
      [11642.346873]  [<ffffffff8117dd70>] SyS_ioctl+0x57/0x79
      [11642.347720]  [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b
      [11642.350222] 4 locks held by fdm-stress/26849:
      [11642.350898]  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff811706ee>] __sb_start_write+0x5f/0xb0
      [11642.352375]  #1:  (&type->i_mutex_dir_key#4/1){+.+.+.}, at: [<ffffffffa0465981>] btrfs_mksubvol+0x4b/0x45d [btrfs]
      [11642.354072]  #2:  (&fs_info->subvol_sem){++++..}, at: [<ffffffffa0465a2a>] btrfs_mksubvol+0xf4/0x45d [btrfs]
      [11642.355647]  #3:  (&root->ordered_extent_mutex){+.+...}, at: [<ffffffffa044f456>] btrfs_wait_ordered_extents+0x50/0x217 [btrfs]
      [11642.357516] INFO: task fdm-stress:26850 blocked for more than 120 seconds.
      [11642.358508]       Not tainted 4.4.0-rc6-btrfs-next-21+ #1
      [11642.359376] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [11642.368625] fdm-stress      D ffff88021f167688     0 26850  26591 0x00000000
      [11642.369716]  ffff88021f167688 0000000000000001 0000000000014ec0 ffff88023edd4ec0
      [11642.370950]  ffff880128a98680 ffff88021f168000 ffff88023edd4ec0 7fffffffffffffff
      [11642.372210]  0000000000000002 ffffffff8147b7f9 ffff88021f1676a0 ffffffff8147b541
      [11642.373430] Call Trace:
      [11642.373853]  [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f
      [11642.374623]  [<ffffffff8147b541>] schedule+0x82/0x9a
      [11642.375948]  [<ffffffff8147e7fe>] schedule_timeout+0x43/0x109
      [11642.376862]  [<ffffffff8147b7f9>] ? bit_wait+0x2f/0x2f
      [11642.377637]  [<ffffffff8108afd1>] ? trace_hardirqs_on_caller+0x17b/0x197
      [11642.378610]  [<ffffffff8108affa>] ? trace_hardirqs_on+0xd/0xf
      [11642.379457]  [<ffffffff810b079b>] ? timekeeping_get_ns+0xe/0x33
      [11642.380366]  [<ffffffff810b0f61>] ? ktime_get+0x41/0x52
      [11642.381353]  [<ffffffff8147ac08>] io_schedule_timeout+0xa0/0x102
      [11642.382255]  [<ffffffff8147ac08>] ? io_schedule_timeout+0xa0/0x102
      [11642.383162]  [<ffffffff8147b814>] bit_wait_io+0x1b/0x39
      [11642.383945]  [<ffffffff8147bb21>] __wait_on_bit_lock+0x4c/0x90
      [11642.384875]  [<ffffffff8111829f>] __lock_page+0x66/0x68
      [11642.385749]  [<ffffffff81082f29>] ? autoremove_wake_function+0x3a/0x3a
      [11642.386721]  [<ffffffffa0450ddd>] lock_page+0x31/0x34 [btrfs]
      [11642.387596]  [<ffffffffa0454e3b>] extent_write_cache_pages.isra.19.constprop.35+0x1af/0x2f4 [btrfs]
      [11642.389030]  [<ffffffffa0455373>] extent_writepages+0x4b/0x5c [btrfs]
      [11642.389973]  [<ffffffff810a25ad>] ? rcu_read_lock_sched_held+0x61/0x69
      [11642.390939]  [<ffffffffa043c913>] ? btrfs_writepage_start_hook+0xce/0xce [btrfs]
      [11642.392271]  [<ffffffffa0451c32>] ? __clear_extent_bit+0x26e/0x2c0 [btrfs]
      [11642.393305]  [<ffffffffa043aa82>] btrfs_writepages+0x28/0x2a [btrfs]
      [11642.394239]  [<ffffffff811236bc>] do_writepages+0x23/0x2c
      [11642.395045]  [<ffffffff811198c9>] __filemap_fdatawrite_range+0x5a/0x61
      [11642.395991]  [<ffffffff81119946>] filemap_fdatawrite_range+0x13/0x15
      [11642.397144]  [<ffffffffa044f87e>] btrfs_start_ordered_extent+0xd0/0x1a1 [btrfs]
      [11642.398392]  [<ffffffffa0452094>] ? clear_extent_bit+0x17/0x19 [btrfs]
      [11642.399363]  [<ffffffffa0445945>] btrfs_get_blocks_direct+0x12b/0x61c [btrfs]
      [11642.400445]  [<ffffffff8119f7a1>] ? dio_bio_add_page+0x3d/0x54
      [11642.401309]  [<ffffffff8119fa93>] ? submit_page_section+0x7b/0x111
      [11642.402213]  [<ffffffff811a0258>] do_blockdev_direct_IO+0x685/0xc24
      [11642.403139]  [<ffffffffa044581a>] ? btrfs_page_exists_in_range+0x1a1/0x1a1 [btrfs]
      [11642.404360]  [<ffffffffa043d267>] ? btrfs_get_extent_fiemap+0x1c0/0x1c0 [btrfs]
      [11642.406187]  [<ffffffff811a0828>] __blockdev_direct_IO+0x31/0x33
      [11642.407070]  [<ffffffff811a0828>] ? __blockdev_direct_IO+0x31/0x33
      [11642.407990]  [<ffffffffa043d267>] ? btrfs_get_extent_fiemap+0x1c0/0x1c0 [btrfs]
      [11642.409192]  [<ffffffffa043b4ca>] btrfs_direct_IO+0x1c7/0x27e [btrfs]
      [11642.410146]  [<ffffffffa043d267>] ? btrfs_get_extent_fiemap+0x1c0/0x1c0 [btrfs]
      [11642.411291]  [<ffffffff81119a2c>] generic_file_read_iter+0x89/0x4e1
      [11642.412263]  [<ffffffff8108ac05>] ? mark_lock+0x24/0x201
      [11642.413057]  [<ffffffff8116e1f8>] __vfs_read+0x79/0x9d
      [11642.413897]  [<ffffffff8116e6f1>] vfs_read+0x8f/0xd2
      [11642.414708]  [<ffffffff8116ef3d>] SyS_read+0x50/0x7e
      [11642.415573]  [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b
      [11642.416572] 1 lock held by fdm-stress/26850:
      [11642.417345]  #0:  (&f->f_pos_lock){+.+.+.}, at: [<ffffffff811877e8>] __fdget_pos+0x3a/0x40
      [11642.418703] INFO: task fdm-stress:26851 blocked for more than 120 seconds.
      [11642.419698]       Not tainted 4.4.0-rc6-btrfs-next-21+ #1
      [11642.420612] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
      [11642.421807] fdm-stress      D ffff880196483d28     0 26851  26591 0x00000000
      [11642.422878]  ffff880196483d28 00ff8801c8f60740 0000000000014ec0 ffff88023ed94ec0
      [11642.424149]  ffff8801c8f60740 ffff880196484000 0000000000000246 ffff8801c8f60740
      [11642.425374]  ffff8801bb711840 ffff8801bb711878 ffff880196483d40 ffffffff8147b541
      [11642.426591] Call Trace:
      [11642.427013]  [<ffffffff8147b541>] schedule+0x82/0x9a
      [11642.427856]  [<ffffffff8147b6d5>] schedule_preempt_disabled+0x18/0x24
      [11642.428852]  [<ffffffff8147c23a>] mutex_lock_nested+0x1d7/0x3b4
      [11642.429743]  [<ffffffffa044f456>] ? btrfs_wait_ordered_extents+0x50/0x217 [btrfs]
      [11642.430911]  [<ffffffffa044f456>] btrfs_wait_ordered_extents+0x50/0x217 [btrfs]
      [11642.432102]  [<ffffffffa044f674>] ? btrfs_wait_ordered_roots+0x57/0x191 [btrfs]
      [11642.433259]  [<ffffffffa044f456>] ? btrfs_wait_ordered_extents+0x50/0x217 [btrfs]
      [11642.434431]  [<ffffffffa044f6ea>] btrfs_wait_ordered_roots+0xcd/0x191 [btrfs]
      [11642.436079]  [<ffffffffa0410cab>] btrfs_sync_fs+0xe0/0x1ad [btrfs]
      [11642.437009]  [<ffffffff81197900>] ? SyS_tee+0x23c/0x23c
      [11642.437860]  [<ffffffff81197920>] sync_fs_one_sb+0x20/0x22
      [11642.438723]  [<ffffffff81171435>] iterate_supers+0x75/0xc2
      [11642.439597]  [<ffffffff81197d00>] sys_sync+0x52/0x80
      [11642.440454]  [<ffffffff8147fa97>] entry_SYSCALL_64_fastpath+0x12/0x6b
      [11642.441533] 3 locks held by fdm-stress/26851:
      [11642.442370]  #0:  (&type->s_umount_key#37){+++++.}, at: [<ffffffff8117141f>] iterate_supers+0x5f/0xc2
      [11642.444043]  #1:  (&fs_info->ordered_operations_mutex){+.+...}, at: [<ffffffffa044f661>] btrfs_wait_ordered_roots+0x44/0x191 [btrfs]
      [11642.446010]  #2:  (&root->ordered_extent_mutex){+.+...}, at: [<ffffffffa044f456>] btrfs_wait_ordered_extents+0x50/0x217 [btrfs]
      
      This happened because under specific timings the path for direct IO reads
      can deadlock with concurrent buffered writes. The diagram below shows how
      this happens for an example file that has the following layout:
      
           [  extent A  ]  [  extent B  ]  [ ....
           0K              4K              8K
      
           CPU 1                                               CPU 2                             CPU 3
      
      DIO read against range
       [0K, 8K[ starts
      
      btrfs_direct_IO()
        --> calls btrfs_get_blocks_direct()
            which finds the extent map for the
            extent A and leaves the range
            [0K, 4K[ locked in the inode's
            io tree
      
                                                         buffered write against
                                                         range [4K, 8K[ starts
      
                                                         __btrfs_buffered_write()
                                                           --> dirties page at 4K
      
                                                                                           a user space
                                                                                           task calls sync
                                                                                           for e.g or
                                                                                           writepages() is
                                                                                           invoked by mm
      
                                                                                           writepages()
                                                                                             run_delalloc_range()
                                                                                               cow_file_range()
                                                                                                 --> ordered extent X
                                                                                                     for the buffered
                                                                                                     write is created
                                                                                                     and
                                                                                                     writeback starts
      
        --> calls btrfs_get_blocks_direct()
            again, without submitting first
            a bio for reading extent A, and
            finds the extent map for extent B
      
        --> calls lock_extent_direct()
      
            --> locks range [4K, 8K[
            --> finds ordered extent X
                covering range [4K, 8K[
            --> unlocks range [4K, 8K[
      
                                                        buffered write against
                                                        range [0K, 8K[ starts
      
                                                        __btrfs_buffered_write()
                                                          prepare_pages()
                                                            --> locks pages with
                                                                offsets 0 and 4K
                                                          lock_and_cleanup_extent_if_need()
                                                            --> blocks attempting to
                                                                lock range [0K, 8K[ in
                                                                the inode's io tree,
                                                                because the range [0, 4K[
                                                                is already locked by the
                                                                direct IO task at CPU 1
      
            --> calls
                btrfs_start_ordered_extent(oe X)
      
                btrfs_start_ordered_extent(oe X)
      
                  --> At this point writeback for ordered
                      extent X has not finished yet
      
                  filemap_fdatawrite_range()
                    btrfs_writepages()
                      extent_writepages()
                        extent_write_cache_pages()
                          --> finds page with offset 0
                              with the writeback tag
                              (and not dirty)
                          --> tries to lock it
                               --> deadlock, task at CPU 2
                                   has the page locked and
                                   is blocked on the io range
                                   [0, 4K[ that was locked
                                   earlier by this task
      
      So fix this by falling back to a buffered read in the direct IO read path
      when an ordered extent for a buffered write is found.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      ade77029
    • Filipe Manana's avatar
      Btrfs: fix extent_same allowing destination offset beyond i_size · f4dfe687
      Filipe Manana authored
      When using the same file as the source and destination for a dedup
      (extent_same ioctl) operation we were allowing it to dedup to a
      destination offset beyond the file's size, which doesn't make sense and
      it's not allowed for the case where the source and destination files are
      not the same file. This made de deduplication operation successful only
      when the source range corresponded to a hole, a prealloc extent or an
      extent with all bytes having a value of 0x00. This was also leaving a
      file hole (between i_size and destination offset) without the
      corresponding file extent items, which can be reproduced with the
      following steps for example:
      
        $ mkfs.btrfs -f /dev/sdi
        $ mount /dev/sdi /mnt/sdi
      
        $ xfs_io -f -c "pwrite -S 0xab 304457 404990" /mnt/sdi/foobar
        wrote 404990/404990 bytes at offset 304457
        395 KiB, 99 ops; 0.0000 sec (31.150 MiB/sec and 7984.5149 ops/sec)
      
        $ /git/hub/duperemove/btrfs-extent-same 24576 /mnt/sdi/foobar 28672 /mnt/sdi/foobar 929792
        Deduping 2 total files
        (28672, 24576): /mnt/sdi/foobar
        (929792, 24576): /mnt/sdi/foobar
        1 files asked to be deduped
        i: 0, status: 0, bytes_deduped: 24576
        24576 total bytes deduped in this operation
      
        $ umount /mnt/sdi
        $ btrfsck /dev/sdi
        Checking filesystem on /dev/sdi
        UUID: 98c528aa-0833-427d-9403-b98032ffbf9d
        checking extents
        checking free space cache
        checking fs roots
        root 5 inode 257 errors 100, file extent discount
        Found file extent holes:
                start: 712704, len: 217088
        found 540673 bytes used err is 1
        total csum bytes: 400
        total tree bytes: 131072
        total fs tree bytes: 32768
        total extent tree bytes: 16384
        btree space waste bytes: 123675
        file data blocks allocated: 671744
          referenced 671744
        btrfs-progs v4.2.3
      
      So fix this by not allowing the destination to go beyond the file's size,
      just as we do for the same where the source and destination files are not
      the same.
      
      A test for xfstests follows.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      f4dfe687
    • Filipe Manana's avatar
      Btrfs: fix file loss on log replay after renaming a file and fsync · 2be63d5c
      Filipe Manana authored
      We have two cases where we end up deleting a file at log replay time
      when we should not. For this to happen the file must have been renamed
      and a directory inode must have been fsynced/logged.
      
      Two examples that exercise these two cases are listed below.
      
        Case 1)
      
        $ mkfs.btrfs -f /dev/sdb
        $ mount /dev/sdb /mnt
        $ mkdir -p /mnt/a/b
        $ mkdir /mnt/c
        $ touch /mnt/a/b/foo
        $ sync
        $ mv /mnt/a/b/foo /mnt/c/
        # Create file bar just to make sure the fsync on directory a/ does
        # something and it's not a no-op.
        $ touch /mnt/a/bar
        $ xfs_io -c "fsync" /mnt/a
        < power fail / crash >
      
        The next time the filesystem is mounted, the log replay procedure
        deletes file foo.
      
        Case 2)
      
        $ mkfs.btrfs -f /dev/sdb
        $ mount /dev/sdb /mnt
        $ mkdir /mnt/a
        $ mkdir /mnt/b
        $ mkdir /mnt/c
        $ touch /mnt/a/foo
        $ ln /mnt/a/foo /mnt/b/foo_link
        $ touch /mnt/b/bar
        $ sync
        $ unlink /mnt/b/foo_link
        $ mv /mnt/b/bar /mnt/c/
        $ xfs_io -c "fsync" /mnt/a/foo
        < power fail / crash >
      
        The next time the filesystem is mounted, the log replay procedure
        deletes file bar.
      
      The reason why the files are deleted is because when we log inodes
      other then the fsync target inode, we ignore their last_unlink_trans
      value and leave the log without enough information to later replay the
      rename operations. So we need to look at the last_unlink_trans values
      and fallback to a transaction commit if they are greater than the
      id of the last committed transaction.
      
      So fix this by looking at the last_unlink_trans values and fallback to
      transaction commits when needed. Also, when logging other inodes (for
      case 1 we logged descendants of the fsync target inode while for case 2
      we logged ascendants) we need to care about concurrent tasks updating
      the last_unlink_trans of inodes we are logging (which was already an
      existing problem in check_parent_dirs_for_sync()). Since we can not
      acquire their inode mutex (vfs' struct inode ->i_mutex), as that causes
      deadlocks with other concurrent operations that acquire the i_mutex of
      2 inodes (other fsyncs or renames for example), we need to serialize on
      the log_mutex of the inode we are logging. A task setting a new value for
      an inode's last_unlink_trans must acquire the inode's log_mutex and it
      must do this update before doing the actual unlink operation (which is
      already the case except when deleting a snapshot). Conversely the task
      logging the inode must first log the inode and then check the inode's
      last_unlink_trans value while holding its log_mutex, as if its value is
      not greater then the id of the last committed transaction it means it
      logged a safe state of the inode's items, while if its value is not
      smaller then the id of the last committed transaction it means the inode
      state it has logged might not be safe (the concurrent task might have
      just updated last_unlink_trans but hasn't done yet the unlink operation)
      and therefore a transaction commit must be done.
      
      Test cases for xfstests follow in separate patches.
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      2be63d5c
    • Filipe Manana's avatar
      Btrfs: fix unreplayable log after snapshot delete + parent dir fsync · 1ec9a1ae
      Filipe Manana authored
      If we delete a snapshot, fsync its parent directory and crash/power fail
      before the next transaction commit, on the next mount when we attempt to
      replay the log tree of the root containing the parent directory we will
      fail and prevent the filesystem from mounting, which is solvable by wiping
      out the log trees with the btrfs-zero-log tool but very inconvenient as
      we will lose any data and metadata fsynced before the parent directory
      was fsynced.
      
      For example:
      
        $ mkfs.btrfs -f /dev/sdc
        $ mount /dev/sdc /mnt
        $ mkdir /mnt/testdir
        $ btrfs subvolume snapshot /mnt /mnt/testdir/snap
        $ btrfs subvolume delete /mnt/testdir/snap
        $ xfs_io -c "fsync" /mnt/testdir
        < crash / power failure and reboot >
        $ mount /dev/sdc /mnt
        mount: mount(2) failed: No such file or directory
      
      And in dmesg/syslog we get the following message and trace:
      
      [192066.361162] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257
      [192066.363010] ------------[ cut here ]------------
      [192066.365268] WARNING: CPU: 4 PID: 5130 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x17a/0x354 [btrfs]()
      [192066.367250] BTRFS: Transaction aborted (error -2)
      [192066.368401] Modules linked in: btrfs dm_flakey dm_mod ppdev sha256_generic xor raid6_pq hmac drbg ansi_cprng aesni_intel acpi_cpufreq tpm_tis aes_x86_64 tpm ablk_helper evdev cryptd sg parport_pc i2c_piix4 psmouse lrw parport i2c_core pcspkr gf128mul processor serio_raw glue_helper button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs]
      [192066.377154] CPU: 4 PID: 5130 Comm: mount Tainted: G        W       4.4.0-rc6-btrfs-next-20+ #1
      [192066.378875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
      [192066.380889]  0000000000000000 ffff880143923670 ffffffff81257570 ffff8801439236b8
      [192066.382561]  ffff8801439236a8 ffffffff8104ec07 ffffffffa039dc2c 00000000fffffffe
      [192066.384191]  ffff8801ed31d000 ffff8801b9fc9c88 ffff8801086875e0 ffff880143923710
      [192066.385827] Call Trace:
      [192066.386373]  [<ffffffff81257570>] dump_stack+0x4e/0x79
      [192066.387387]  [<ffffffff8104ec07>] warn_slowpath_common+0x99/0xb2
      [192066.388429]  [<ffffffffa039dc2c>] ? __btrfs_unlink_inode+0x17a/0x354 [btrfs]
      [192066.389236]  [<ffffffff8104ec68>] warn_slowpath_fmt+0x48/0x50
      [192066.389884]  [<ffffffffa039dc2c>] __btrfs_unlink_inode+0x17a/0x354 [btrfs]
      [192066.390621]  [<ffffffff81184b55>] ? iput+0xb0/0x266
      [192066.391200]  [<ffffffffa039ea25>] btrfs_unlink_inode+0x1c/0x3d [btrfs]
      [192066.391930]  [<ffffffffa03ca623>] check_item_in_log+0x1fe/0x29b [btrfs]
      [192066.392715]  [<ffffffffa03ca827>] replay_dir_deletes+0x167/0x1cf [btrfs]
      [192066.393510]  [<ffffffffa03cccc7>] replay_one_buffer+0x417/0x570 [btrfs]
      [192066.394241]  [<ffffffffa03ca164>] walk_up_log_tree+0x10e/0x1dc [btrfs]
      [192066.394958]  [<ffffffffa03cac72>] walk_log_tree+0xa5/0x190 [btrfs]
      [192066.395628]  [<ffffffffa03ce8b8>] btrfs_recover_log_trees+0x239/0x32c [btrfs]
      [192066.396790]  [<ffffffffa03cc8b0>] ? replay_one_extent+0x50a/0x50a [btrfs]
      [192066.397891]  [<ffffffffa0394041>] open_ctree+0x1d8b/0x2167 [btrfs]
      [192066.398897]  [<ffffffffa03706e1>] btrfs_mount+0x5ef/0x729 [btrfs]
      [192066.399823]  [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
      [192066.400739]  [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
      [192066.401700]  [<ffffffff811714b9>] mount_fs+0x67/0x131
      [192066.402482]  [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
      [192066.403930]  [<ffffffffa03702bd>] btrfs_mount+0x1cb/0x729 [btrfs]
      [192066.404831]  [<ffffffff8108ad98>] ? trace_hardirqs_on+0xd/0xf
      [192066.405726]  [<ffffffff8108959b>] ? lockdep_init_map+0xb9/0x1b3
      [192066.406621]  [<ffffffff811714b9>] mount_fs+0x67/0x131
      [192066.407401]  [<ffffffff81188560>] vfs_kern_mount+0x6c/0xde
      [192066.408247]  [<ffffffff8118ae36>] do_mount+0x893/0x9d2
      [192066.409047]  [<ffffffff8113009b>] ? strndup_user+0x3f/0x8c
      [192066.409842]  [<ffffffff8118b187>] SyS_mount+0x75/0xa1
      [192066.410621]  [<ffffffff8147e517>] entry_SYSCALL_64_fastpath+0x12/0x6b
      [192066.411572] ---[ end trace 2de42126c1e0a0f0 ]---
      [192066.412344] BTRFS: error (device dm-0) in __btrfs_unlink_inode:3986: errno=-2 No such entry
      [192066.413748] BTRFS: error (device dm-0) in btrfs_replay_log:2464: errno=-2 No such entry (Failed to recover log tree)
      [192066.415458] BTRFS error (device dm-0): cleaner transaction attach returned -30
      [192066.444613] BTRFS: open_ctree failed
      
      This happens because when we are replaying the log and processing the
      directory entry pointing to the snapshot in the subvolume tree, we treat
      its btrfs_dir_item item as having a location with a key type matching
      BTRFS_INODE_ITEM_KEY, which is wrong because the type matches
      BTRFS_ROOT_ITEM_KEY and therefore must be processed differently, as the
      object id refers to a root number and not to an inode in the root
      containing the parent directory.
      
      So fix this by triggering a transaction commit if an fsync against the
      parent directory is requested after deleting a snapshot. This is the
      simplest approach for a rare use case. Some alternative that avoids the
      transaction commit would require more code to explicitly delete the
      snapshot at log replay time (factoring out common code from ioctl.c:
      btrfs_ioctl_snap_destroy()), special care at fsync time to remove the
      log tree of the snapshot's root from the log root of the root of tree
      roots, amongst other steps.
      
      A test case for xfstests that triggers the issue follows.
      
        seq=`basename $0`
        seqres=$RESULT_DIR/$seq
        echo "QA output created by $seq"
        tmp=/tmp/$$
        status=1	# failure is the default!
        trap "_cleanup; exit \$status" 0 1 2 3 15
      
        _cleanup()
        {
            _cleanup_flakey
            cd /
            rm -f $tmp.*
        }
      
        # get standard environment, filters and checks
        . ./common/rc
        . ./common/filter
        . ./common/dmflakey
      
        # real QA test starts here
        _need_to_be_root
        _supported_fs btrfs
        _supported_os Linux
        _require_scratch
        _require_dm_target flakey
        _require_metadata_journaling $SCRATCH_DEV
      
        rm -f $seqres.full
      
        _scratch_mkfs >>$seqres.full 2>&1
        _init_flakey
        _mount_flakey
      
        # Create a snapshot at the root of our filesystem (mount point path), delete it,
        # fsync the mount point path, crash and mount to replay the log. This should
        # succeed and after the filesystem is mounted the snapshot should not be visible
        # anymore.
        _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/snap1
        _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/snap1
        $XFS_IO_PROG -c "fsync" $SCRATCH_MNT
        _flakey_drop_and_remount
        [ -e $SCRATCH_MNT/snap1 ] && \
            echo "Snapshot snap1 still exists after log replay"
      
        # Similar scenario as above, but this time the snapshot is created inside a
        # directory and not directly under the root (mount point path).
        mkdir $SCRATCH_MNT/testdir
        _run_btrfs_util_prog subvolume snapshot $SCRATCH_MNT $SCRATCH_MNT/testdir/snap2
        _run_btrfs_util_prog subvolume delete $SCRATCH_MNT/testdir/snap2
        $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir
        _flakey_drop_and_remount
        [ -e $SCRATCH_MNT/testdir/snap2 ] && \
            echo "Snapshot snap2 still exists after log replay"
      
        _unmount_flakey
      
        echo "Silence is golden"
        status=0
        exit
      Signed-off-by: default avatarFilipe Manana <fdmanana@suse.com>
      Tested-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Reviewed-by: default avatarLiu Bo <bo.li.liu@oracle.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      1ec9a1ae
    • Chris Mason's avatar
      Merge tag 'for-chris' of... · c05c5ee5
      Chris Mason authored
      Merge tag 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.6
      
      Btrfs patchsets for 4.6
      c05c5ee5
  8. 28 Feb, 2016 15 commits
    • Linus Torvalds's avatar
      Linux 4.5-rc6 · fc77dbd3
      Linus Torvalds authored
      fc77dbd3
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 1b9540ce
      Linus Torvalds authored
      Pull perf fixes from Thomas Gleixner:
       "A rather largish series of 12 patches addressing a maze of race
        conditions in the perf core code from Peter Zijlstra"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf: Robustify task_function_call()
        perf: Fix scaling vs. perf_install_in_context()
        perf: Fix scaling vs. perf_event_enable()
        perf: Fix scaling vs. perf_event_enable_on_exec()
        perf: Fix ctx time tracking by introducing EVENT_TIME
        perf: Cure event->pending_disable race
        perf: Fix race between event install and jump_labels
        perf: Fix cloning
        perf: Only update context time when active
        perf: Allow perf_release() with !event->ctx
        perf: Do not double free
        perf: Close install vs. exit race
      1b9540ce
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 4b696dcb
      Linus Torvalds authored
      Pull x86 fixes from Thomas Gleixner:
       "This update contains:
      
         - Hopefully the last ASM CLAC fixups
      
         - A fix for the Quark family related to the IMR lock which makes
           kexec work again
      
         - A off-by-one fix in the MPX code.  Ironic, isn't it?
      
         - A fix for X86_PAE which addresses once more an unsigned long vs
           phys_addr_t hickup"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/mpx: Fix off-by-one comparison with nr_registers
        x86/mm: Fix slow_virt_to_phys() for X86_PAE again
        x86/entry/compat: Add missing CLAC to entry_INT80_32
        x86/entry/32: Add an ASM_CLAC to entry_SYSENTER_32
        x86/platform/intel/quark: Change the kernel's IMR lock bit to false
      4b696dcb
    • Linus Torvalds's avatar
      Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 76c03f0f
      Linus Torvalds authored
      Pull scheduler fixlet from Thomas Gleixner:
       "A trivial printk typo fix"
      
      * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        sched/deadline: Fix trivial typo in printk() message
      76c03f0f
    • Linus Torvalds's avatar
      Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · f055ae04
      Linus Torvalds authored
      Pull irq fixes from Thomas Gleixner:
       "Four small fixes for irqchip drivers:
      
         - Add missing low level irq handler initialization on mxs, so
           interrupts can acutally be delivered
      
         - Add a missing barrier to the GIC driver
      
         - Two fixes for the GIC-V3-ITS driver, addressing a double EOI write
           and a cache flush beyond the actual region"
      
      * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        irqchip/gic-v3: Add missing barrier to 32bit version of gic_read_iar()
        irqchip/mxs: Add missing set_handle_irq()
        irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory size
        irqchip/gic-v3-its: Fix double ICC_EOIR write for LPI in EOImode==1
      f055ae04
    • Linus Torvalds's avatar
      Merge tag 'staging-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 8da51430
      Linus Torvalds authored
      Pull staging/android fix from Greg KH:
       "Here is one patch, for the android binder driver, to resolve a
        reported problem.  Turns out it has been around for a while (since
        3.15), so it is good to finally get it resolved.
      
        It has been in linux-next for a while with no reported issues"
      
      * tag 'staging-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
        drivers: android: correct the size of struct binder_uintptr_t for BC_DEAD_BINDER_DONE
      8da51430
    • Linus Torvalds's avatar
      Merge tag 'usb-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 62718e30
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are a few USB fixes for 4.5-rc6
      
        They fix a reported bug for some USB 3 devices by reverting the recent
        patch, a MAINTAINERS change for some drivers, some new device ids, and
        of course, the usual bunch of USB gadget driver fixes.
      
        All have been in linux-next for a while with no reported issues"
      
      * tag 'usb-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        MAINTAINERS: drop OMAP USB and MUSB maintainership
        usb: musb: fix DMA for host mode
        usb: phy: msm: Trigger USB state detection work in DRD mode
        usb: gadget: net2280: fix endpoint max packet for super speed connections
        usb: gadget: gadgetfs: unregister gadget only if it got successfully registered
        usb: gadget: remove driver from pending list on probe error
        Revert "usb: hub: do not clear BOS field during reset device"
        usb: chipidea: fix return value check in ci_hdrc_pci_probe()
        usb: chipidea: error on overflow for port_test_write
        USB: option: add "4G LTE usb-modem U901"
        USB: cp210x: add IDs for GE B650V3 and B850V3 boards
        USB: option: add support for SIM7100E
        usb: musb: Fix DMA desired mode for Mentor DMA engine
        usb: gadget: fsl_qe_udc: fix IS_ERR_VALUE usage
        usb: dwc2: USB_DWC2 should depend on HAS_DMA
        usb: dwc2: host: fix the data toggle error in full speed descriptor dma
        usb: dwc2: host: fix logical omissions in dwc2_process_non_isoc_desc
        usb: dwc3: Fix assignment of EP transfer resources
        usb: dwc2: Add extra delay when forcing dr_mode
      62718e30
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 12b9fa6a
      Linus Torvalds authored
      Pull vfs fixes from Al Viro.
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        do_last(): ELOOP failure exit should be done after leaving RCU mode
        should_follow_link(): validate ->d_seq after having decided to follow
        namei: ->d_inode of a pinned dentry is stable only for positives
        do_last(): don't let a bogus return value from ->open() et.al. to confuse us
        fs: return -EOPNOTSUPP if clone is not supported
        hpfs: don't truncate the file when delete fails
      12b9fa6a
    • Linus Torvalds's avatar
      Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 340b3a5b
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "We didn't have a batch last week, so this one is slightly larger.
      
        None of them are scary though, a handful of fixes for small DT pieces,
        replacing properties with newer conventions.
      
        Highlights:
         - N900 fix for setting system revision
         - onenand init fix to avoid filesystem corruption
         - Clock fix for audio on Beaglebone-x15
         - Fixes on shmobile to deal with CONFIG_DEBUG_RODATA (default y in 4.6)
      
        + misc smaller stuff"
      
      * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        MAINTAINERS: Extend info, add wiki and ml for meson arch
        MAINTAINERS: alpine: add a new maintainer and update the entry
        ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
        ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
        Revert "regulator: tps65217: remove tps65217.dtsi file"
        ARM: shmobile: Remove shmobile_boot_arg
        ARM: shmobile: Move shmobile_smp_{mpidr, fn, arg}[] from .text to .bss
        ARM: shmobile: r8a7779: Remove remainings of removed SCU boot setup code
        ARM: shmobile: Move shmobile_scu_base from .text to .bss
        ARM: OMAP2+: Fix omap_device for module reload on PM runtime forbid
        ARM: OMAP2+: Improve omap_device error for driver writers
        ARM: DTS: am57xx-beagle-x15: Select SYS_CLK2 for audio clocks
        ARM: dts: am335x/am57xx: replace gpio-key,wakeup with wakeup-source property
        ARM: OMAP2+: Set system_rev from ATAGS for n900
        ARM: dts: orion5x: fix the missing mtd flash on linkstation lswtgl
        ARM: dts: kirkwood: use unique machine name for ds112
        ARM: dts: imx6: remove bogus interrupt-parent from CAAM node
      340b3a5b
    • Al Viro's avatar
      do_last(): ELOOP failure exit should be done after leaving RCU mode · 5129fa48
      Al Viro authored
      ... or we risk seeing a bogus value of d_is_symlink() there.
      
      Cc: stable@vger.kernel.org # v4.2+
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      5129fa48
    • Al Viro's avatar
      should_follow_link(): validate ->d_seq after having decided to follow · a7f77542
      Al Viro authored
      ... otherwise d_is_symlink() above might have nothing to do with
      the inode value we've got.
      
      Cc: stable@vger.kernel.org # v4.2+
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      a7f77542
    • Al Viro's avatar
      namei: ->d_inode of a pinned dentry is stable only for positives · d4565649
      Al Viro authored
      both do_last() and walk_component() risk picking a NULL inode out
      of dentry about to become positive, *then* checking its flags and
      seeing that it's not negative anymore and using (already stale by
      then) value they'd fetched earlier.  Usually ends up oopsing soon
      after that...
      
      Cc: stable@vger.kernel.org # v3.13+
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      d4565649
    • Al Viro's avatar
      do_last(): don't let a bogus return value from ->open() et.al. to confuse us · c80567c8
      Al Viro authored
      ... into returning a positive to path_openat(), which would interpret that
      as "symlink had been encountered" and proceed to corrupt memory, etc.
      It can only happen due to a bug in some ->open() instance or in some LSM
      hook, etc., so we report any such event *and* make sure it doesn't trick
      us into further unpleasantness.
      
      Cc: stable@vger.kernel.org # v3.6+, at least
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      c80567c8
    • Christoph Hellwig's avatar
      fs: return -EOPNOTSUPP if clone is not supported · 0fcbf996
      Christoph Hellwig authored
      -EBADF is a rather confusing error if an operations is not supported,
      and nfsd gets rather upset about it.
      Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      0fcbf996
    • Mikulas Patocka's avatar
      hpfs: don't truncate the file when delete fails · b6853f78
      Mikulas Patocka authored
      The delete opration can allocate additional space on the HPFS filesystem
      due to btree split. The HPFS driver checks in advance if there is
      available space, so that it won't corrupt the btree if we run out of space
      during splitting.
      
      If there is not enough available space, the HPFS driver attempted to
      truncate the file, but this results in a deadlock since the commit
      7dd29d8d ("HPFS: Introduce a global mutex
      and lock it on every callback from VFS").
      
      This patch removes the code that tries to truncate the file and -ENOSPC is
      returned instead. If the user hits -ENOSPC on delete, he should try to
      delete other files (that are stored in a leaf btree node), so that the
      delete operation will make some space for deleting the file stored in
      non-leaf btree node.
      Reported-by: default avatarAl Viro <viro@ZenIV.linux.org.uk>
      Signed-off-by: default avatarMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
      Cc: stable@vger.kernel.org	# 2.6.39+
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      b6853f78