- 20 Apr, 2006 6 commits
-
-
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Andrew Morton authored
This is back again. Offending patch is x86_64-mm-hotadd-reserve.patch arch/arm/kernel/setup.c:435: error: conflicting types for 'add_memory' include/linux/memory_hotplug.h:102: error: previous declaration of 'add_memory' was here arch/arm/kernel/setup.c:435: error: conflicting types for 'add_memory' include/linux/memory_hotplug.h:102: error: previous declaration of 'add_memory' was here Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek The irq2gpio array was recently converted from an array of ints to an array of chars (by patch 3368/1.) However, this array contains elements that are -1, and on ARM, the char type is unsigned by default, so this patch broke the GPIO check in ixp4xx_set_irq_type. Change the 'char' to be a 'signed char' to fix this. Signed-off-by:
Deepak Saxena <dsaxena@plexity.net> Signed-off-by:
-
- 19 Apr, 2006 34 commits
-
-
OGAWA Hirofumi authored
Those also break userland regs like following. 00000000 <sys_chown16>: 0: 0f b7 44 24 0c movzwl 0xc(%esp),%eax 5: 83 ca ff or $0xffffffff,%edx 8: 0f b7 4c 24 08 movzwl 0x8(%esp),%ecx d: 66 83 f8 ff cmp $0xffffffff,%ax 11: 0f 44 c2 cmove %edx,%eax 14: 66 83 f9 ff cmp $0xffffffff,%cx 18: 0f 45 d1 cmovne %ecx,%edx 1b: 89 44 24 0c mov %eax,0xc(%esp) 1f: 89 54 24 08 mov %edx,0x8(%esp) 23: e9 fc ff ff ff jmp 24 <sys_chown16+0x24> where the tailcall at the end overwrites the incoming stack-frame. Signed-off-by:OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> [ I would _really_ like to have a way to tell gcc about calling conventions. The "prevent_tail_call()" macro is pretty ugly ] Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: make a function static IB/ipath: Fix whitespace IB/ipath: Make more names static IB/mad: Fix RMPP version check during agent registration IB/srp: Remove request from list when SCSI abort succeeds
-
Adrian Bunk authored
This patch makes the needlessly global mthca_update_rate() static. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
Roland Dreier authored
Signed-off-by: -
Roland Dreier authored
Make symbols that are only used in a single source file static. Signed-off-by: -
Hal Rosenstock authored
Only check that RMPP version is not specified when MAD class does not support RMPP. Just because a class is allowed to use RMPP doesn't mean that rmpp_version needs to be set for the MAD agent to register. Checking this was a recent change which was too pedantic. Signed-off-by:
Hal Rosenstock <halr@voltaire.com> Signed-off-by:
-
Roland Dreier authored
If a SCSI abort succeeds, then the aborted request should to be removed from the list of pending requests. This fixes list corruption after an abort occurs. Signed-off-by: -
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: SUNRPC: Dead code in net/sunrpc/auth_gss/auth_gss.c NFS: remove needless check in nfs_opendir() NFS: nfs_show_stats; for_each_possible_cpu(), not NR_CPUS NFS: make 2 functions static NFS,SUNRPC: Fix compiler warnings if CONFIG_PROC_FS & CONFIG_SYSCTL are unset NFS: fix PROC_FS=n compile error VFS: Fix another open intent Oops RPCSEC_GSS: fix leak in krb5 code caused by superfluous kmalloc
-
Eric Sesterhenn authored
Hi, the coverity checker spotted that cred is always NULL when we jump to out_err ( there is just one case, when we fail to allocate the memory for cred ) This is Coverity ID #79 Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Carsten Otte authored
Local variable res was initialized to 0 - no check needed here. Signed-off-by:
Carsten Otte <cotte@de.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
John Hawkes authored
Convert a for-loop that explicitly references "NR_CPUS" into the potentially more efficient for_each_possible_cpu() construct. Signed-off-by:
John Hawkes <hawkes@sgi.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
Trond Myklebust authored
Signed-off-by: -
Adrian Bunk authored
fs/built-in.o: In function `nfs_show_stats':inode.c:(.text+0x15481a): undefined reference to `rpc_print_iostats' net/built-in.o: In function `rpc_destroy_client': undefined reference to `rpc_free_iostats' net/built-in.o: In function `rpc_clone_client': undefined reference to `rpc_alloc_iostats' net/built-in.o: In function `rpc_new_client': undefined reference to `rpc_alloc_iostats' net/built-in.o: In function `xprt_release': undefined reference to `rpc_count_iostats' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by:
-
Trond Myklebust authored
If the call to nfs_intent_set_file() fails to open a file in nfs4_proc_create(), we should return an error. Signed-off-by: -
J. Bruce Fields authored
I was sloppy when generating a previous patch; I modified the callers of krb5_make_checksum() to allocate memory for the buffer where the result is returned, then forgot to modify krb5_make_checksum to stop allocating that memory itself. The result is a per-packet memory leak. This fixes the problem by removing the now-superfluous kmalloc(). Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
-
git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] splice: fixup writeout path after ->map changes [PATCH] splice: offset fixes [PATCH] tee: link_pipe() must be careful when dropping one of the pipe locks [PATCH] splice: cleanup the SPLICE_F_NONBLOCK handling [PATCH] splice: close i_size truncate races on read
-
Antonino A. Daplas authored
Fix return code of fb_write(): If at least 1 byte was transferred to the device, return number of bytes, otherwise: - return -EFBIG - if file offset is past the maximum allowable offset or size is greater than framebuffer length - return -ENOSPC - if size is greater than framebuffer length - offset Signed-off-by:Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Randy Dunlap authored
Fix modpost section mismatch warnings in savagefb driver: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x66) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .exit.text after 'savagefb_remove' (at offset 0x6e) WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.text: from .text.savagefb_resume after 'savagefb_resume' (at offset 0x70) Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Randy Dunlap authored
Marking radeon_pci_register() as __devinit clears up all section mismatch warnings that are caused by radeon_pci_register() calling various __devinit function. Is there some reason not to do this? WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x628) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6b5) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text: from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x6bd) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_probe_screens from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7d6) WARNING: drivers/video/aty/radeonfb.o - Section mismatch: reference to .init.text:radeon_check_modes from .text.radeonfb_pci_register after 'radeonfb_pci_register' (at offset 0x7e5) Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jean Delvare authored
Fix the following section mismatch: WARNING: drivers/video/savage/savagefb.o - Section mismatch: reference to .init.data: from .text.savagefb_probe after 'savagefb_probe' (at offset 0x5e2) Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
KAI.HSU authored
From http://bugzilla.kernel.org/show_bug.cgi?id=6358 The alim15x3.c havn't been update for 3 years. Recently when we use this "ULI M1573" south bridge chip found that can't mount CDROM(VCD) smoothly, must waiting for a long time. After I check the "ULI M1573" south bridge datasheet, I found the reason. The reason is the "ULI M1573" version in the Linux is "0xC7" not "0xC4" anymore So I was modified the source than it was successed. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Adrian Bunk authored
Noted by Sergei Shtylylov <sshtylyov@ru.mvista.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Anatoli Antonovitch authored
Add support for the IDE device on ATI SB600 Signed-off-by:
Felix Kuehling <fkuehlin@ati.com> Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by:
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by:
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by:
-
Prasanna S Panchamukhi authored
Andrew Morton pointed out that compiler might not inline the functions marked for inline in kprobes. There-by allowing the insertion of probes on these kprobes routines, which might cause recursion. This patch removes all such inline and adds them to kprobes section there by disallowing probes on all such routines. Some of the routines can even still be inlined, since these routines gets executed after the kprobes had done necessay setup for reentrancy. Signed-off-by:
-
Jan Engelhardt authored
The wording of two messages in drivers/pnp/manager.c is incorrect. Fix that. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Acked-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Randy.Dunlap authored
From: Randy Dunlap <rdunlap@xenotime.net> Fix all modpost section mismatch warnings in parport_pc: WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x230) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x283) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x3e6) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x400) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x463) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.text: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x488) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:superios from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x54c) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_probe_port after 'parport_pc_probe_port' (at offset 0x56a) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x67) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x9f) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0xa7) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data:cards from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x132) WARNING: drivers/parport/parport_pc.o - Section mismatch: reference to .init.data: from .text.parport_pc_pci_probe after 'parport_pc_pci_probe' (at offset 0x142) Signed-off-by:
-
Heikki Orsila authored
I was looking into random driver code and found a suspicious looking memcpy() in drivers/char/ipmi/ipmi_bt_sm.c on 2.6.17-rc1: if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH)) return -1; ... memcpy(bt->write_data + 3, data + 1, size - 1); where sizeof bt->write_data is IPMI_MAX_MSG_LENGTH. It looks like the memcpy would overflow by 2 bytes if size == IPMI_MAX_MSG_LENGTH. A patch attached to limit size to (IPMI_MAX_LENGTH - 2). Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
Jesper Juhl authored
Fix potential NULL pointer deref in gen_init_cpio.c spotted by coverity checker. This fixes coverity bug #86 Without this patch we risk dereferencing a NULL `type' in the "if ('\n' == *type) {" line. Signed-off-by:Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Replace outdated help message with a reference to README. Update README for make *config variants and environment variable info. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
