- 06 Feb, 2008 40 commits
-
-
Jean Delvare authored
The rtc-pcf8583 driver is using the I2C_M_NOSTART flag but shouldn't. This flag is only meant for broken chips and the PCF8583 RTC chip is not one of these. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alessandro Zummo authored
Add adds a warning if a potentially conflicting RTC option has been selected and makes some other cosmetic fixes to the Kconfig. Signed-off-by:
-
Miklos Szeredi authored
Libfuse basically creates a new thread for each new request. This is fine for synchronous requests, which are naturally limited. However background requests (especially writepage) can cause a thread creation storm. To avoid this, limit the number of background requests available to userspace. This is done by introducing another queue for background requests, and a counter for the number of "active" requests, which are currently available for userspace. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
Move the fields 'dentry' and 'vfsmount' into the request specific union, since these are only used for the RELEASE request. Signed-off-by:
-
Miklos Szeredi authored
Invalidate attributes on create, since st_ctime is updated. Reported by Szabolcs Szakacsits. Signed-off-by:
-
Eric Sandeen authored
Jeff Moyer pointed out that a mount; umount loop of ecryptfs, with the same cipher & other mount options, created a new ecryptfs_key_tfm_cache item each time, and the cache could grow quite large this way. Looking at this with mhalcrow, we saw that ecryptfs_parse_options() unconditionally called ecryptfs_add_new_key_tfm(), which is what was adding these items. Refactor ecryptfs_get_tfm_and_mutex_for_cipher_name() to create a new helper function, ecryptfs_tfm_exists(), which checks for the cipher on the cached key_tfm_list, and sets a pointer to it if it exists. This can then be called from ecryptfs_parse_options(), and new key_tfm's can be added only when a cached one is not found. With list locking changes suggested by akpm. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Trevor Highland authored
Only the lower byte of cipher_code is ever used, so it makes sense for its type to be u8. Signed-off-by:
Trevor Highland <trevor.highland@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
The printk statements that result when the user does not have the proper key available could use some refining. Signed-off-by:
Mike Halcrow <mhalcrow@us.ibm.com> Cc: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Eric Sandeen authored
ecryptfs_debug really should not be a mount option; it is not per-mount, but rather sets a global "ecryptfs_verbosity" variable which affects all mounted filesysytems. It's already settable as a module load option, I think we can leave it at that. Also, if set, since secret values come out in debug messages, kick things off with a stern warning. Signed-off-by:
-
Eric Sandeen authored
Change ecryptfs_show_options to reflect the actual mount options in use. Note that this does away with the "dir=" output, which is not a valid mount option and appears to be unused. Mount options such as "ecryptfs_verbose" and "ecryptfs_xattr_metadata" are somewhat indeterminate for a given fs, but in any case the reported mount options can be used in a new mount command to get the same behavior. [akpm@linux-foundation.org: fix printk warning] Signed-off-by:
-
Trevor Highland authored
There is no need to keep re-setting the same key for any given eCryptfs inode. This patch optimizes the use of the crypto API and helps performance a bit. Signed-off-by:
-
Michael Halcrow authored
Remove internal references to header extents; just keep track of header bytes instead. Headers can easily span multiple pages with the recent persistent file changes. Signed-off-by:
-
Adrian Bunk authored
- make the following needlessly global code static: - crypto.c:ecryptfs_lower_offset_for_extent() - crypto.c:key_tfm_list - crypto.c:key_tfm_list_mutex - inode.c:ecryptfs_getxattr() - main.c:ecryptfs_init_persistent_file() - remove the no longer used mmap.c:ecryptfs_lower_page_cache - #if 0 the unused read_write.c:ecryptfs_read() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Andrew Morton authored
drivers/isdn/hardware/eicon/debug.c: In function 'SuperTraceASSIGN': drivers/isdn/hardware/eicon/debug.c:1191: warning: 'rx_dma_magic' may be used uninitialized in this function Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Roel Kluin authored
'!' has a higher priority than '&'. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Tilman Schmidt authored
The ser_gigaset ISDN driver was using a mutex in its close() method for waiting for other running ldisc methods to finish. That's what completions are for. Incidentally, this also avoids a spurious "BUG: lock held at task exit time" message when the driver's userspace daemon daemonizes itself. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Tilman Schmidt authored
Fix the initialization and reference counting of the Gigaset driver modules so that they can be unloaded when they are not actually in use. Signed-off-by:
-
Tilman Schmidt authored
Convert atomic_t variables that don't actually use atomic_t functionality to int. Signed-off-by:
-
Tilman Schmidt authored
Add basic suspend/resume support to the usb_gigaset driver for the Siemens Gigaset M105 USB DECT adapter. Only the USB aspects are handled so far; the ISDN subsystem is not notified in any way, for lack of information about how to do that. The driver does not check for active connections before suspending. They will be dropped when the device loses USB power. Signed-off-by:
-
Tilman Schmidt authored
Add basic suspend/resume support to the bas_gigaset ISDN driver for the Siemens Gigaset SX255 series of ISDN DECT bases. Only the USB aspects are handled so far; the ISDN subsystem is not notified in any way, for lack of information about how to do that. The driver will refuse to suspend if a connection is active. Signed-off-by:
-
Tilman Schmidt authored
Some cleanups to the bas-gigaset and usb-gigaset USB ISDN drivers: - simplified error handling - improved debug messages - readability improvements - removal of obsolete defines and comments Signed-off-by:
-
Tilman Schmidt authored
Make there only be one reference to urb->status per URB callback, and none outside, in preparation for removal of that field. Signed-off-by:
-
Abhishek Sagar authored
Provide support to add an optional user defined callback to be run at function entry of a kretprobe'd function. Also modify the kprobe smoke tests to include an entry-handler during the kretprobe sanity test. Signed-off-by:
Abhishek Sagar <sagar.abhishek@gmail.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
David Brownell authored
Remove some more references to dev->power.power_state. That field is overdue for removal, but we can't do that while it's still referenced in the kernel. The only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Mike Frysinger authored
Use simpler comment headers, and strip out information that is maintained in GIT history Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Sonic Zhang authored
SPI writes should also not return until the last bit is sent. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Bryan Wu authored
Full duplex SPI operation should not read a dummy byte at the first transfer. Bug and fix by Jean-Christian de Rivaz <jc@eclis.ch>: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3678Signed-off-by:
Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by:
-
Bryan Wu authored
PBX 2 SPI devices need the nonstandard "cs change per word" mechanism. This patch is one of three updating this driver to make the last data bits get sent before advancing the transfer ... in this case, before the chipselect gets deactivated. Signed-off-by:
-
Bryan Wu authored
Use the SPI driver's name when requesting gpio lines. When there are gpio conflicts, this helps to narrow down the problems; "bfin-spi" is not informative. Signed-off-by:
-
Bryan Wu authored
Remove useless return status check in restore_state function. Issue was pointed out by Michael. Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Girish authored
This adds driver OMAP SPI specific changes to support OMAP 3430 Signed-off-by:
Girish S G <girishsg@ti.com> Signed-off-by:
-
Magnus Damm authored
Add support for SPI over SCI pins. SCI is a very simple serial controller block that can be found on older SuperH processors. In theory it is possible to use the SCI hardware block in syncronous mode, but this version of the driver simply hooks up the bit banging code on the SCI pins. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
-
David Brownell authored
The two S3C SPI master drivers got merged without much review, so I just noticed that they're doing something that the SPI core code is responsible for, rather than any adapter driver: they try to register SPI devices. This removes that support from those drivers so they act normally. Interestingly, none of the current boards are affected. So it's a net code shrink with no loss of functionality. Signed-off-by:
-
Haavard Skinnemoen authored
In atmel_spi_next_xfer, xfer can be NULL because the next transfer may already have been submitted to the PDC (using DMA chaining). This can cause an oops, since the debug message assumed it was never null. The fix changes how those debug messages are issued, ensuring that one is issued each time a transfer is started instead of once per call. Also, properly indent the "can this transfer be chained" test so it's not hidden as if it were non-conditional code. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
Silvester Erdeg authored
Add support for chained transfers in the atmel_spi driver, letting the DMA controller switch to the next buffer pair without CPU intervention. This reduced I/O latencies by about 2% in one bulk I/O test. It should also help work around several interrelated errata affecting chipselect 0 on at91rm9200 chips. Almost all of the changes are in the reworked atmel_spi_next_xfer() function. That's now called with the driver in one of three states: 1. It isn't transferring anything (in which case the first transfer of the current message is going to be sent) 2. It has finished transfering a non-chainable transfer (in which case it will go to the next transfer in the message) 3. It has finished transfering a chained transfer (in which case the next transfer is already queued) After that it will queue the next transfer if it can be chained. Signed-off-by:Szilveszter Ordog <slipszi@gmail.com> Acked-by:
-
Haavard Skinnemoen authored
Don't insert (undesirable) delays between consecutive words (DLYBCT) or when activating chipselects (DLYBS). Removing the between-word delays improves the performance of bulk transfers (such as mtd_dataflash, m25p80, mmc_spi) significantly. In one test, the improvement was a factor of more than eight! (The large DLYBCT value came from the legacy at91 SPI driver, and it's not clear why it used such a huge value.) Signed-off-by:
-
David Brownell authored
Don't update dev->power.power_state any more in the SPI core. The only reason to update this scheduled-to-be-removed field was to make the already-removed /sys/devices/.../power/state files work better. Signed-off-by:
-
Geert Uytterhoeven authored
Commit edfaa7c3 Driver core: convert block from raw kobjects to core devices This moves the block devices to /sys/class/block. It will create a flat list of all block devices, with the disks and partitions in one directory. For compatibility /sys/block is created and contains symlinks to the disks. introduced a global disk_type variable in <linux/genhd.h>, causing the following compile error on Atari: drivers/block/ataflop.c:93: error: conflicting types for 'disk_type' include/linux/genhd.h:21: error: previous declaration of 'disk_type' was here Rename the local disk_type variable in drivers/block/ataflop.c to atari_disk_type, to avoid the conflict. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
David Fries authored
Standardize the temperature units to millidegrees C for the two sensor conversion routines. Previously the routines were, w1_DS18B20_convert_temp degrees C w1_DS18S20_convert_temp millidegrees C Unfortunately this will break any program using the ds18b20 value as it will now be 1000 times bigger. Fortunately there can't be that many users out there, or some of these bugs will have been fixed by now, such as the negative C error (see previous patch) that makes me think the ds18b20 is the better choice to change because of the current bugs. Signed-off-by:
David Fries <david@fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Borislav Petkov authored
Simplify logic in cdrom_release() without semantic change. Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
