From tools/perf/util/include/linux, so that it becomes accessible to
other tools/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uqohgzilp3ebd3cbybnf3luc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To match the Linux kernel source code structure from where this code came from.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-gubysnp4a8hd98lxoeruak13@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So far what is in there by default is what we were using: 512KB + the
control page, but the admin may change that, and if it does to a smaller
value, all calls to tooling for non root users start failing, requiring
that the user manually set --mmap_pages/-m.

Use instead what is in /proc/sys/kernel/perf_event_mlock_kb.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2f6mtm8xu3wo5lhkql6jdblh@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that normal users can run 'trace', we were using a hardcoded 1024
pages value that was more than the default /proc/sys/kernel/perf_event_mlock_kb
setting.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3banj3yh0sjz41obxtgiel3a@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Considering the per user locked pages limit, improve the message when a
user uses multiple simultaneous perf mmap calls:

When the request is more than the current maximum:

  [acme@ssdandy linux]$ trace -m 128 usleep 1
  Error: Operation not permitted.
  Hint:  Check /proc/sys/kernel/perf_event_mlock_kb (516 kB) setting.
  Hint:  Tried using 516 kB.
  Hint:  Try 'sudo sh -c "echo 1032 > /proc/sys/kernel/perf_event_mlock_kb"', or
  Hint:  Try using a smaller -m/--mmap-pages value.
  [acme@ssdandy linux]$

And when the limit is less than that:

  [acme@ssdandy linux]$ trace -m 512 usleep 1
  Error: Operation not permitted.
  Hint:  Check /proc/sys/kernel/perf_event_mlock_kb (2056 kB) setting.
  Hint:  Tried using 2052 kB.
  Hint:  Try using a smaller -m/--mmap-pages value.
  [acme@ssdandy linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yqdie3c8qvdgenwleri267d4@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Prep patch for doing further checks like when the number of pages that
is being attempted is actually below /proc/sys/kernel/perf_event_mlock_kb but
the operation fails because the user doesn't have CAP_IPC_LOCK.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wetzlux7mzvofu5cuji5i71i@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When failing due to asking for a number of mmap pages that is more than
the max, it was suggesting that an even bigger number of mmap pages
should be specified, doh, au contraire!

Before:

  [acme@ssdandy linux]$ trace -m 128 usleep 1
  Error:	Operation not permitted.
  Hint:	Check /proc/sys/kernel/perf_event_mlock_kb (516 kB) setting.
  Hint:	Tried using 516 kB.
  Hint:	Try using a bigger -m/--mmap-pages value.
  [acme@ssdandy linux]$

After:

  [acme@ssdandy linux]$ trace -m 128 usleep 1
  Error:	Operation not permitted.
  Hint:	Check /proc/sys/kernel/perf_event_mlock_kb (516 kB) setting.
  Hint:	Tried using 516 kB.
  Hint:	Try using a smaller -m/--mmap-pages value.
  [acme@ssdandy linux]$

And to (really) clarify what happens above, when what the user requests
is <= max and even then it fails, a changeset is being made to tell that
this is a per user limit, not per process (in the above example there
was another 'perf trace' running for this user, which was using all the
pages it could use).

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8qope8lxb898narnq5kmu2gf@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Mark events as (x86 only) in help output for 'perf kvm stat live" (Alexander Yarygin)

- Provide a better explanation when mmap fails in 'trace' (Arnaldo Carvalho de Melo)

- Add --buildid-dir option to set cache directory, i.e. use:

      $ perf --buildid-dir /path/to/dir tool --tool-options

  (Jiri Olsa)

- Fix memcpy/memset 'perf bench' output (Rabin Vicent)

- Fix 'perf test' attr tests size values to cope with machine state on
  interrupt ABI changes (Jiri Olsa)

- Fixup callchain type parameter handling error message (Kan Liang)

Infrastructure changes and cleanups:

- calloc/xcalloc: Fix argument order (Arjun Sreedharan)

- Move filename__read_int from tools/perf/ to tools/lib, add sysctl__read_int
  there and use it in place of ad-hoc copies (Arnaldo Carvalho de Melo)

- Use single strcmp call instead of two (Jiri Olsa)

- Remove extra debugdir variables in 'perf buildid-cache' (Jiri Olsa)

- Fix -a segfault related to kcore handling in 'perf buildid-cache' (Jiri Olsa)

- Move cpumode resolve code to add_callchain_ip (Kan Liang)

- Merge memset into memcpy 'perf bench' (Rabin Vincent)

- Change print format from %lu to %PRIu64 in the hists browser (Tom Huynh)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

If we ask for a mmap lenght than the max configured via the relevant
sysctl, provide a better warning, instead of just expanding the EPERM
returned:

[acme@ssdandy ~]$ trace -m 256 -e nanosleep sleep 2
Error:	Operation not permitted.
Hint:	Check /proc/sys/kernel/perf_event_mlock_kb (516 kB) setting.
Hint:	Tried using 1028 kB.
Hint:	Try using a bigger -m/--mmap-pages value.

[acme@ssdandy ~]$ trace -m 128 -e nanosleep sleep 2
  2001.280 (2000.403 ms): nanosleep(rqtp: 0x7fff89a8a7f0) = 0
[acme@ssdandy ~]$

An upcoming patch will autotune the request for non-root users when -m
is not used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cdvxfz2gycetbkopm9sna1qp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pretty print hints about perf_evlist__mmap errors. Will be used in
'trace' in the next patch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2g3gczfwyz0xt3we0s15mqqt@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pt2u7a3b50oddggecx7rwq2n@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Will come in handy for tools, see next patches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nay9j62ztxpytt4ew1tkl4op@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Will be useful for new helpers to read sysctl values.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We allow PMU driver to change the cpu on which the event
should be installed to. This happened in patch:

  e2d37cd2 ("perf: Allow the PMU driver to choose the CPU on which to install events")

This patch also forces all the group members to follow
the currently opened events cpu if the group happened
to be moved.

This and the change of event->cpu in perf_install_in_context()
function introduced in:

  0cda4c02 ("perf: Introduce perf_pmu_migrate_context()")

forces group members to change their event->cpu,
if the currently-opened-event's PMU changed the cpu
and there is a group move.

Above behaviour causes problem for breakpoint events,
which uses event->cpu to touch cpu specific data for
breakpoints accounting. By changing event->cpu, some
breakpoints slots were wrongly accounted for given
cpu.

Vinces's perf fuzzer hit this issue and caused following
WARN on my setup:

   WARNING: CPU: 0 PID: 20214 at arch/x86/kernel/hw_breakpoint.c:119 arch_install_hw_breakpoint+0x142/0x150()
   Can't find any breakpoint slot
   [...]

This patch changes the group moving code to keep the event's
original cpu.
Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1418243031-20367-3-git-send-email-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The uncore_collect_events functions assumes that event group
might contain only uncore events which is wrong, because it
might contain any type of events.

This bug leads to uncore framework touching 'not' uncore events,
which could end up all sorts of bugs.

One was triggered by Vince's perf fuzzer, when the uncore code
touched breakpoint event private event space as if it was uncore
event and caused BUG:

   BUG: unable to handle kernel paging request at ffffffff82822068
   IP: [<ffffffff81020338>] uncore_assign_events+0x188/0x250
   ...

The code in uncore_assign_events() function was looking for
event->hw.idx data while the event was initialized as a
breakpoint with different members in event->hw union.

This patch forces uncore_collect_events() to collect only uncore
events.
Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1418243031-20367-2-git-send-email-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The mmio and ioport events are useful only on x86.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1418218090-20718-1-git-send-email-borntraeger@de.ibm.comSigned-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull leftover perf fixes from Ingo Molnar:
 "Two perf fixes left over from the previous cycle"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf session: Do not fail on processing out of order event
  x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs

Pull perf events update from Ingo Molnar:
 "On the kernel side there's few changes, the one that stands out is
  PEBS machine state sampling support on x86, by Stephane Eranian.

  On the tooling side:

  User visible tooling changes:

   - Don't open the DWARF info multiple times, keeping instead a dwfl
     handle in struct dso, greatly speeding up 'perf report' on powerpc.
     (Sukadev Bhattiprolu)

   - Introduce PARSE_OPT_DISABLED option flag and use it to avoid
     showing undersired options in tools that provides frontends to
     'perf record', like sched, kvm, etc (Namhyung Kim)

   - Fallback to kallsyms when using the minimal 'ELF' loader (Arnaldo
     Carvalho de Melo)

   - Fix annotation with kcore (Adrian Hunter)

   - Support source line numbers in annotate using a hotkey (Andi Kleen)

   - Callchain improvements including:
     * Enable printing the srcline in the history
     * Make get_srcline fall back to sym+offset (Andi Kleen)

   - TUI hist_entry browser fixes, including showing missing overhead
     value for first level callchain.  Detected comparing the output of
     --stdio/--gui (that matched) with --tui, that had this problem.
     (Namhyung Kim)

   - Support handling complete branch stacks as histograms (Andi Kleen)

  Tooling infrastructure changes:

   - Prep work for supporting per-pkg and snapshot counters in 'perf
     stat' (Jiri Olsa)

   - 'perf stat' refactorings, moving stuff from it to evsel.c to use in
     per-pkg/snapshot format changes (Jiri Olsa)

   - Add per-pkg format file parsing (Matt Fleming)

   - Clean up libelf feature support code (Namhyung Kim)

   - Add gzip decompression support for kernel modules (Namhyung Kim)

   - More prep patches for Intel PT, including a a thread stack and more
     stuff made available via the database export mechanism (Adrian
     Hunter)

   - More Intel PT work, including a facility to export sample data
     (comms, threads, symbol names, etc) in a database friendly way,
     with an script to use this to create a postgresql database.
     (Adrian Hunter)

   - Make sure that thread->mg->machine points to the machine where the
     thread exists (it was being set only for the kmaps kernel modules
     case, do it as well for the mmaps) and use it to shorten function
     signatures (Arnaldo Carvalho de Melo)

  ... and lots of other fixes and smaller improvements"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
  perf report: In branch stack mode use address history sorting
  perf report: Add --branch-history option
  perf callchain: Support handling complete branch stacks as histograms
  perf stat: Add support for snapshot counters
  perf stat: Add support for per-pkg counters
  perf tools: Remove perf_evsel__read interface
  perf stat: Use read_counter in read_counter_aggr
  perf stat: Make read_counter work over the thread dimension
  perf stat: Use perf_evsel__read_cb in read_counter
  perf tools: Add snapshot format file parsing
  perf tools: Add per-pkg format file parsing
  perf evsel: Introduce perf_evsel__read_cb function
  perf evsel: Introduce perf_counts_values__scale function
  perf evsel: Introduce perf_evsel__compute_deltas function
  perf tools: Allow to force redirect pr_debug to stderr.
  perf tools: Fix segfault due to invalid kernel dso access
  perf callchain: Make get_srcline fall back to sym+offset
  perf symbols: Move bfd_demangle stubbing to its only user
  perf callchain: Enable printing the srcline in the history
  perf tools: Collapse first level callchain entry if it has sibling
  ...

Pull RCU updates from Ingo Molnar:
 "These are the main changes in this cycle:

    - Streamline RCU's use of per-CPU variables, shifting from "cpu"
      arguments to functions to "this_"-style per-CPU variable
      accessors.

    - signal-handling RCU updates.

    - real-time updates.

    - torture-test updates.

    - miscellaneous fixes.

    - documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  rcu: Fix FIXME in rcu_tasks_kthread()
  rcu: More info about potential deadlocks with rcu_read_unlock()
  rcu: Optimize cond_resched_rcu_qs()
  rcu: Add sparse check for RCU_INIT_POINTER()
  documentation: memory-barriers.txt: Correct example for reorderings
  documentation: Add atomic_long_t to atomic_ops.txt
  documentation: Additional restriction for control dependencies
  documentation: Document RCU self test boot params
  rcutorture: Fix rcu_torture_cbflood() memory leak
  rcutorture: Remove obsolete kversion param in kvm.sh
  rcutorture: Remove stale test configurations
  rcutorture: Enable RCU self test in configs
  rcutorture: Add early boot self tests
  torture: Run Linux-kernel binary out of results directory
  cpu: Avoid puts_pending overflow
  rcu: Remove "cpu" argument to rcu_cleanup_after_idle()
  rcu: Remove "cpu" argument to rcu_prepare_for_idle()
  rcu: Remove "cpu" argument to rcu_needs_cpu()
  rcu: Remove "cpu" argument to rcu_note_context_switch()
  rcu: Remove "cpu" argument to rcu_preempt_check_callbacks()
  ...

Pull locking tree changes from Ingo Molnar:
 "Two changes: a documentation update and a ticket locks live lock fix"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ticketlock: Fix spin_unlock_wait() livelock
  locking/lglocks: Add documentation of current lglocks implementation

Pull asm-generic asm/io.h rewrite from Arnd Bergmann:
 "While there normally is no reason to have a pull request for
  asm-generic but have all changes get merged through whichever tree
  needs them, I do have a series for 3.19.

  There are two sets of patches that change significant portions of
  asm/io.h, and this branch contains both in order to resolve the
  conflicts:

   - Will Deacon has done a set of patches to ensure that all
     architectures define {read,write}{b,w,l,q}_relaxed() functions or
     get them by including asm-generic/io.h.

     These functions are commonly used on ARM specific drivers to avoid
     expensive L2 cache synchronization implied by the normal
     {read,write}{b,w,l,q}, but we need to define them on all
     architectures in order to share the drivers across architectures
     and to enable CONFIG_COMPILE_TEST configurations for them

   - Thierry Reding has done an unrelated set of patches that extends
     the asm-generic/io.h file to the degree necessary to make it useful
     on ARM64 and potentially other architectures"

* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (29 commits)
  ARM64: use GENERIC_PCI_IOMAP
  sparc: io: remove duplicate relaxed accessors on sparc32
  ARM: sa11x0: Use void __iomem * in MMIO accessors
  arm64: Use include/asm-generic/io.h
  ARM: Use include/asm-generic/io.h
  asm-generic/io.h: Implement generic {read,write}s*()
  asm-generic/io.h: Reconcile I/O accessor overrides
  /dev/mem: Use more consistent data types
  Change xlate_dev_{kmem,mem}_ptr() prototypes
  ARM: ixp4xx: Properly override I/O accessors
  ARM: ixp4xx: Fix build with IXP4XX_INDIRECT_PCI
  ARM: ebsa110: Properly override I/O accessors
  ARC: Remove redundant PCI_IOBASE declaration
  documentation: memory-barriers: clarify relaxed io accessor semantics
  x86: io: implement dummy relaxed accessor macros for writes
  tile: io: implement dummy relaxed accessor macros for writes
  sparc: io: implement dummy relaxed accessor macros for writes
  powerpc: io: implement dummy relaxed accessor macros for writes
  parisc: io: implement dummy relaxed accessor macros for writes
  mn10300: io: implement dummy relaxed accessor macros for writes
  ...

Pull ARM64 SoC changes from Arnd Bergmann:
 "This adds support for two new ARM64 platforms:

   - ARM Juno
   - AMD Seattle

  We had submissions for a number of additional platforms from Samsung,
  Freescale and Spreadtrum but are still working out the best process
  for getting these merged"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: amd-seattle: Fix PCI bus range due to SMMU limitation
  arm64: ARM: Fix the Generic Timers interrupt active level description
  arm64: amd-seattle: Adding device tree for AMD Seattle platform
  arm64: Add Juno board device tree.
  arm64: Create link to include/dt-bindings to enable C preprocessor use.

Pull ARM SoC defconfig changes from Arnd Bergmann:
 "This is a collection of the various changes to defconfig files, most
  importantly enabling some additional platforms in the
  multi_v7_defconfig file.  These are split out into a separate branch
  to avoid most of the merge conflicts in the defconfig files.

  This also touches 12 other defconfig files for shmobile, at91,
  hisilicon, keystone, mvebu, omap, and tegra"

* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: omap2plus_defconfig: enable ECAP and EHRPWM
  ARM: omap2plus_defconfig: enable XHCI
  ARM: omap2plus_defconfig: enable AM33XX SoC sound
  ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen
  ARM: omap2plus_defconfig: remove unwanted ethernet drivers
  ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs
  ARM: at91/defconfig: add DM9000 to at91_dt
  ARM: at91/defconfig: add QT1070 to at91_dt
  ARM: at91/defconfig: add TCB PWM driver selection
  ARM: at91/defconfig: add the XDMA driver
  ARM: at91: sama5: update defconfig
  ARM: defconfig: imx_v6_v7_defconfig updates
  ARM: multi_v7_defconfig: add driver support for hix5hd2
  ARM: exynos_defconfig: Use 16 minors per MMC block device
  ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig
  ARM: mvebu: enable i2c device in mvebu_v7_defconfig
  ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfig
  ARM: tegra: Regenerate default configuration
  ARM: multi_v7_defconfig: Enable cgroups
  ARM: multi_v7_defconfig: Enable Broadcom Cygnus
  ...

Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann:
 "The GPMC driver has traditionally been considered a part of the OMAP
  platform code and tightly interweaved with some of the boards.

  With this cleanup, it has finally come to the point where it makes
  sense to move it out of arch/arm into drivers/memory, where we already
  have other drivers for similar hardware.  The cleanups are still
  ongoing, with the goal of eventually having a standalone driver that
  does not require an interface to architecture code.

  This is a separate branch because of dependencies on multiple other
  branches, and to keep the drivers changes separate from the normal
  cleanups"

* tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  memory: gpmc: Move omap gpmc code to live under drivers
  ARM: OMAP2+: Move GPMC initcall to devices.c
  ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
  ARM: OMAP2+: Remove unnecesary include in GPMC driver
  ARM: OMAP2+: Drop board file for 3430sdp
  ARM: OMAP2+: Drop board file for ti8168evm
  ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c
  ARM: OMAP2+: Require proper GPMC timings for devices
  ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file
  ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select
  ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe
  ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it
  ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices
  ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child()
  ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()

Pull ARM SoC DT updates from Arnd Bergmann:
 "The DT branch adds a lot of new stuff for additional SoC and board
  support.  The branch is the largest one and contains 513 out of the
  total 972 non-merge arm-soc changesets for 3.19.

  Most of the changes are about enabling additional on-chip devices for
  existing machines, but there are also an unusual number of new SoC
  types being added this time:

   - AMLogic Meson8
   - ARM Realview in DT mode
   - Allwinner A80
   - Broadcom BCM47081
   - Broadcom Cygnus
   - Freescale LS1021A
   - Freescale Vybrid 500 series
   - Mediatek MT6592, MT8127, MT8135
   - STMicroelectronics STiH410
   - Samsung Exynos4415

  The level of support for the above differs widely, some are just stubs
  with nothing more than CPU, memory and a UART, but others are fairly
  complete.  As usual, these get extended over time.

  There are also many new boards getting added, this is the list of
  model strings that are showing up in new dts files:

   - ARM RealView PB1176
   - Altera SOCFPGA Arria 10
   - Asus RT-N18U (BCM47081)
   - Buffalo WZR-1750DHP (BCM4708)
   - Buffalo WZR-600DHP2 (BCM47081)
   - Cygnus Enterprise Phone (BCM911360_ENTPHN)
   - D-Link DIR-665
   - Google Spring
   - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
   - IGEPv2 Rev. F (TI OMAP AM/DM37x)
   - LS1021A QDS Board
   - LS1021A TWR Board
   - LeMaker Banana Pi
   - MarsBoard RK3066
   - MediaTek MT8127 Moose Board
   - MediaTek MT8135 evaluation board
   - Mele M3
   - Merrii A80 Optimus Board
   - Netgear R6300 V2 (BCM4708)
   - Nomadik STN8815NHK
   - NovaTech OrionLXm
   - Olimex A20-OLinuXino-LIME2
   - Raspberry Pi Model B+
   - STiH410 B2120
   - Samsung Monk board
   - Samsung Rinato board
   - Synology DS213j
   - Synology DS414
   - TBS2910 Matrix ARM mini PC
   - TI AM5728 BeagleBoard-X15
   - Toradex Colibri VF50 on Colibri Evaluation Board
   - Zynq ZYBO Development Board

  Other notable changes include:

   - exynos: cleanup of existing dts files
   - mvebu: improved pinctrl support for Armada 370/XP
   - nomadik: restructuring dts files
   - omap: added CAN bus support
   - shmobile: added clock support for some SoCs
   - shmobile: added sound support for some SoCs
   - sirf: reset controller support
   - sunxi: continuing the relicensing under dual GPL/MIT
   - sunxi: lots of new on-chip device support
   - sunxi: working simplefb support (long awaited)
   - various: provide stdout-path property for earlycon"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits)
  ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured
  Revert "ARM: dts: rockchip: temporarily disable smp on rk3288"
  ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2
  ARM: BCM5301X: Add DT for Asus RT-N18U
  ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP
  ARM: BCM5301X: Add DT for Netgear R6300 V2
  ARM: BCM5301X: Add buttons for Netgear R6250
  ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard
  ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
  arm: dts: zynq: Add Digilent ZYBO board
  arm: dts: zynq: Move crystal freq. to board level
  doc: dt: vendor-prefixes: Add Digilent Inc
  Documentation: devicetree: Fix Xilinx VDMA specification
  ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188
  ARM: dts: rockchip: add label property for leds on Radxa Rock
  ARM: BCM5301X: Add LEDs for Netgear R6250 V1
  ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file
  ARM: dts: add sysreg phandle to i2c device nodes for exynos
  ARM: dts: Remove unused bootargs from exynos3250-rinato
  ARM: dts: add board dts file for Exynos3250-based Monk board
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  The largest single change here this time around is the Tegra
  iommu/memory controller driver, which gets updated to the new iommu DT
  binding.  More drivers like this are likely to follow for the
  following merge window, but we should be able to do those through the
  iommu maintainer.

  Other notable changes are:
   - reset controller drivers from the reset maintainer (socfpga, sti,
     berlin)
   - fixes for the keystone navigator driver merged last time
   - at91 rtc driver changes related to the at91 cleanups
   - ARM perf driver changes from Will Deacon
   - updates for the brcmstb_gisb driver"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
  clocksource: arch_timer: Fix code to use physical timers when requested
  memory: Add NVIDIA Tegra memory controller support
  bus: brcmstb_gisb: Add register offset tables for older chips
  bus: brcmstb_gisb: Look up register offsets in a table
  bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
  bus: brcmstb_gisb: Make the driver buildable on MIPS
  of: Add NVIDIA Tegra memory controller binding
  ARM: tegra: Move AHB Kconfig to drivers/amba
  amba: Add Kconfig file
  clk: tegra: Implement memory-controller clock
  serial: samsung: Fix serial config dependencies for exynos7
  bus: brcmstb_gisb: resolve section mismatch
  ARM: common: edma: edma_pm_resume may be unused
  ARM: common: edma: add suspend resume hook
  powerpc/iommu: Rename iommu_[un]map_sg functions
  rtc: at91sam9: add DT bindings documentation
  rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
  ARM: at91: add clk_lookup entry for RTT devices
  rtc: at91sam9: rework the Kconfig description
  ...

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "The remaining cleanups for 3.19 are to a large part result of
  devicetree conversion nearing completion on two other platforms
  besides AT91:

   - Like AT91, Renesas shmobile is in the process to migrate to DT and
     multiplatform, but using a different approach of doing it one SoC
     at a time.  For 3.19, the r8a7791 platform and associated "Koelsch"
     board are considered complete and we remove the non-DT
     non-multiplatform support for this.

   - The ARM Versatile Express has supported DT and multiplatform for a
     long time, but we have still kept the legacy board files around,
     because not all drivers were fully working before.  We have finally
     taken the last step to remove the board files.

  Other changes in this branch are preparation for the later branches or
  just unrelated to the more interesting changes:

   - The dts files for arm64 get moved into per-vendor directories for a
     clearer structure.

   - Some dead code removal (zynq, exynos, davinci, imx)

   - Using pr_*() macros more consistently instead of printk(KERN_*) in
     some platform code"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits)
  ARM: zynq: Remove secondary_startup() declaration from header
  ARM: vexpress: Enable regulator framework when MMCI is in use
  ARM: vexpress: Remove non-DT code
  ARM: imx: Remove unneeded .map_io initialization
  ARM: dts: imx6qdl-sabresd: Fix the microphone route
  ARM: imx: refactor mxc_iomux_mode()
  ARM: imx: simplify clk_pllv3_prepare()
  ARM: imx6q: drop unnecessary semicolon
  ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
  ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define
  ARM: at91: remove useless init_time for DT-only SoCs
  ARM: davinci: Remove redundant casts
  ARM: davinci: Use standard logging styles
  ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/
  ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/
  ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/
  ARM: EXYNOS: Remove unused static iomapping
  ARM: at91: fix build breakage due to legacy board removals
  ...

Pull ARM SoC cleanup on mach-at91 from Arnd Bergmann:
 "On Atmel AT91, the conversion to device tree is now considered
  complete, and all machines that were not already converted in 3.18 are
  assumed to be unused and dropped by the maintainer.

  All remaining board files that were written in C are dropped, and the
  ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed
  altogether.  Cleaning up the last pieces was great fun, so I took the
  time to do some of the coding myself and removed several hundred code
  lines that ended up unused after the board files were done.

  There are still a couple of AT91 specific device drivers that are not
  converted to DT (CF, USB-OTG) and currently not working, and the
  platform itself is not "multiplatform"-enabled, but both issues are
  going to be taken care of in the 3.20 cycle.

  This is split out from the other cleanups purely based on the size of
  the branch"

* tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: at91: remove unused board.h file
  ARM: at91: remove unneeded header files
  ARM: at91/clocksource: remove !DT PIT initializations
  ARM: at91: at91rm9200 ST initialization is now DT only
  ARM: at91: remove old AT91-specific drivers
  ARM: at91: cleanup initilisation code by removing dead code
  ARM: at91/Kconfig: select board files automatically
  ARM: at91: remove unused IRQ function declarations
  ARM: at91: remove legacy IRQ driver and related code
  ARM: at91: remove old at91-specific clock driver
  ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files
  ARM: at91: remove all !DT related configuration options
  ARM: at91/trivial: update Kconfig comment to mention SAMA5
  ARM: at91: always USE_OF from now on
  ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers
  ARM: at91: switch configuration option to SOC_AT91RM9200
  ARM: at91: remove at91rm9200 legacy board support
  ARM: at91: remove at91rm9200 legacy boards files
  ARM: at91/Kconfig: remove useless fbdev Kconfig options
  ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
  ...

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "These are bug fixes for harmless problems that were not important
  enough to get fixed in 3.19.  This contains updates to the MAINTAINERS
  file, in particular:

   - Ben Dooks stepped down as Samsung co-maintainer (thanks Ben for
     long years of maintaining this).  Kukjin Kim, who has been doing
     the work de-facto by himself recently is now the only maintainer.

   - Liviu, Sudeep and Lorenzo from ARM now officially maintain the
     Versatile Express platform, which was orphaned (thanks for

   - Gregory Fong and Florian Fainelli help out on the Broadcom BCM7XXX
     platform

   - Ray Jui and Scott Branden are the future maintainers for the newly
     merged Broadcom Cygnus platform.  Welcome!

  In terms of actual fixes, we have the usual set of OMAP bug fixes,
  which Tony Lindgren separates out well from the other OMAP changes,
  one really ep93xx regression fix against 3.11 that didn't make it for
  3.18, a few GIC changes from Marc Zyngier as a preparation for later
  rework (the current code is wrong in a harmless way), on Tegra
  regression and one samsung spelling fix"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx6: fix bogus use of irq_get_irq_data
  ARM: imx: irq: fix buggy usage of irq_data irq field
  MAINTAINERS: ARM Versatile Express platform, add missing pattern
  MAINTAINERS: ARM Versatile Express platform
  arm: ep93xx: add dma_masks for the M2P and M2M DMA controllers
  MAINTAINERS: Add ahci_st.c to ARCH/STI architecture
  MAINTAINERS: add entry for the GISB arbiter driver
  MAINTAINERS: update brcmstb entries
  MAINTAINERS: update email address and cleanup for exynos entry
  ARM: tegra: Re-add removed SoC id macro to tegra_resume()
  MAINTAINERS: Entry for Cygnus/iproc arm architecture
  ARM: OMAP: serial: remove last vestige of DTR_gpio support.
  ARM: OMAP2+: gpmc: Get rid of "ti,elm-id not found" warning
  ARM: EXYNOS: fix typo in static struct name "exynos5_list_diable_wfi_wfe"
  ARM: OMAP2: Remove unnecessary KERN_* in omap_phy_internal.c
  ARM: OMAP4+: Remove unused omap_l3_noc platform init
  ARM: dts: Add twl keypad map for omap3 EVM
  ARM: dts: Add twl keypad map for LDP
  ARM: dts: Fix NAND last partition size on LDP
  ARM: OMAP3: Fix errors for omap_l3_smx when booted with device tree

Pull arm64 updates from Will Deacon:
 "Here's the usual mixed bag of arm64 updates, also including some
  related EFI changes (Acked by Matt) and the MMU gather range cleanup
  (Acked by you).

  Changes include:
   - support for alternative instruction patching from Andre
   - seccomp from Akashi
   - some AArch32 instruction emulation, required by the Android folks
   - optimisations for exception entry/exit code, cmpxchg, pcpu atomics
   - mmu_gather range calculations moved into core code
   - EFI updates from Ard, including long-awaited SMBIOS support
   - /proc/cpuinfo fixes to align with the format used by arch/arm/
   - a few non-critical fixes across the architecture"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
  arm64: remove the unnecessary arm64_swiotlb_init()
  arm64: add module support for alternatives fixups
  arm64: perf: Prevent wraparound during overflow
  arm64/include/asm: Fixed a warning about 'struct pt_regs'
  arm64: Provide a namespace to NCAPS
  arm64: bpf: lift restriction on last instruction
  arm64: Implement support for read-mostly sections
  arm64: compat: align cacheflush syscall with arch/arm
  arm64: add seccomp support
  arm64: add SIGSYS siginfo for compat task
  arm64: add seccomp syscall for compat task
  asm-generic: add generic seccomp.h for secure computing mode 1
  arm64: ptrace: allow tracer to skip a system call
  arm64: ptrace: add NT_ARM_SYSTEM_CALL regset
  arm64: Move some head.text functions to executable section
  arm64: jump labels: NOP out NOP -> NOP replacement
  arm64: add support to dump the kernel page tables
  arm64: Add FIX_HOLE to permanent fixed addresses
  arm64: alternatives: fix pr_fmt string for consistency
  arm64: vmlinux.lds.S: don't discard .exit.* sections at link-time
  ...

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/mm: Eliminate memset after alloc_bootmem_pages
  nubus: Remove superfluous interrupt disable/restore

Pull Altera Nios II processor support from Ley Foon Tan:
 "Here is the Linux port for Nios II processor (from Altera) arch/nios2/
  tree for v3.19.

  The patchset has been discussed on the kernel mailing lists since
  April and has gone through 6 revisions of review.  The additional
  changes since then have been mostly further cleanups and fixes when
  merged with other trees.

  The arch code is in arch/nios2 and one asm-generic change (acked by
  Arnd)"

Arnd Bergmann says:
 "I've reviewed the architecture port in the past and it looks good in
  its latest version"
Acked-by: Arnd Bergmann <arnd@arndb.de>

* tag 'nios2-v3.19-rc1' of git://git.rocketboards.org/linux-socfpga-next: (40 commits)
  nios2: Make NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL
  nios2: Add missing NR_CPUS to Kconfig
  nios2: asm-offsets: Remove unused definition TI_TASK
  nios2: Remove write-only struct member from nios2_timer
  nios2: Remove unused extern declaration of shm_align_mask
  nios2: include linux/type.h in io.h
  nios2: move include asm-generic/io.h to end of file
  nios2: remove include asm-generic/iomap.h from io.h
  nios2: remove unnecessary space before define
  nios2: fix error handling of irq_of_parse_and_map
  nios2: Use IS_ENABLED instead of #ifdefs to check config symbols
  nios2: Build infrastructure
  Documentation: Add documentation for Nios2 architecture
  MAINTAINERS: Add nios2 maintainer
  nios2: ptrace support
  nios2: Module support
  nios2: Nios2 registers
  nios2: Miscellaneous header files
  nios2: Cpuinfo handling
  nios2: Time keeping
  ...

Following change adjusted 'struct perf_event_attr', but let
the attr test's sizes untouched:
  60e2364e perf: Add ability to sample machine state on interrupt

  [jolsa@krava perf]$ ./perf test attr -vv
  --- start ---
  test child forked, pid 9719
  running './tests/attr/test-stat-group1'
    'PERF_TEST_ATTR=/tmp/tmp4drvul ./perf stat -o /tmp/tmp4drvul/perf.data -e '{cycles,instructions}' kill >/dev/null 2>&1' ret 1
  expected size=96, got 104
  FAILED './tests/attr/test-stat-group1' - match failure

Adjusting test size values for attr test.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20141209135301.GC6784@krava.brq.redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The calloc() and xcalloc() functions takes @nmemb first and then @size.  Fix all w/
pattern "calloc\s*(\s*sizeof".
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Using flag to distinguish between branch_history and normal callchain.

Move the cpumode to add_callchain_ip function.

No change in behavior.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1417532814-26208-3-git-send-email-kan.liang@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix up parse_callchain_record_opt error message for 'fp', in the past using '-g
fp' was a valid alternative to '--call-graph fp', which is not the case since:

  commit 09b0fd45
  Author: Jiri Olsa <jolsa@redhat.com>
  Date:   Sat Oct 26 16:25:33 2013 +0200

  perf record: Split -g and --call-graph

I.e. -g means "use the configured unwind data collection method" which has as
default 'fp', while --call-graph requires passing the method to use.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1417532814-26208-2-git-send-email-kan.liang@intel.com
[ split this from a larger patch related to LBR based unwinding ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding --buildid-dir to be able to set specific cache directory. It's
going to be handy for buildid tests coming in shortly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1417460789-13874-4-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The kcore_filename is uninitialized and trash value could trigger
build_id_cache__add_kcore function ending up with segfault.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1417460789-13874-7-git-send-email-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>