- 19 Jun, 2017 22 commits
-
-
Antoine Ténart authored
The run-time self-tests fail quite early, as soon as the input block size is larger than 64 bytes: alg: hash: Test 4 failed for sha1-sun4i-ss 00000000: b9 c9 1e 52 c0 26 d8 39 81 ff f2 3c 99 b1 27 b2 00000010: 30 d6 c9 85 One thing to notice is the value of the last word, which is the one expected (it can sometime be the last two words). The datasheet isn't very clear about when the digest is ready to retrieve and is seems the bit SS_DATA_END is cleared when the digest was computed *but* that doesn't mean the digest is ready to retrieve in the registers. A ndelay(1) is added before reading the computed digest to ensure it is available in the SS_MD[] registers. Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Antoine Ténart authored
The CRYPTO_ALG_KERN_DRIVER_ONLY flag is set for hardware accelerated ciphers accessible through a kernel driver only. This is the case for ciphers exposed by the sun4i-ss driver. This patch sets this flag. Signed-off-by:
-
Antoine Ténart authored
Update the sun4i-ss driver to use the skcipher API instead of the old ablkcipher one. It's a bit more tricky than s/ablkcipher/skcipher/, but still nothing special and the driver's logic stays the same. Signed-off-by:
-
Antoine Ténart authored
Use the GENMASK helper instead of custom calculations to generate masks, It also helps the readability. Signed-off-by:
-
Antoine Ténart authored
A bit is appended at the end of the input buffer for sha1. Simplify the code assigning it. Signed-off-by:
-
Antoine Ténart authored
When sending the last block of data to the engine, it should be padded so that the total length of the request can be given to the engine as the last 2 words of the last 64 bytes block. Simplify the calculation of this pad offset. Signed-off-by:
-
Antoine Ténart authored
Parts of the bf buffer were dynamically set to 0. Change this to set the whole buffer to 0 by default to avoid any mistake. Signed-off-by:
-
Antoine Ténart authored
Do not use DMA is the request is 0 length. Signed-off-by:
-
Antoine Ténart authored
Replace custom bit shifts and masks with lower/upper_32_bits helpers. Signed-off-by:
-
Antoine Ténart authored
Cosmetic clean up if conditional checks on 0s values. Signed-off-by:
-
Antoine Ténart authored
Cosmetic change to avoid having a full screen a variable definitions. It also helps to see which variables share the same type. Signed-off-by:
-
Karim Eshapa authored
Use more common error logging style. Signed-off-by:
Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by:
-
Kamil Konieczny authored
- Fixed bugs in example for shash and rng (added missing "*" and " *"). - Corrected pr_info() in calc_hash(). - Added example usage of calc_hash(). - No need for negate PTR_ERR to get error code, as crypto_alloc_rng already returns negative values like ERR_PTR(-ENOMEM). Fixed. Signed-off-by:
Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by:
-
Dan Carpenter authored
We checked (nbytes < bsize) inside the loops so it's not possible to hit the "goto done;" here. This code is cut and paste from other slightly different loops where we don't have the check inside the loop. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Eric Biggers authored
mix_columns() contains a comment which shows the matrix used by the MixColumns step of AES, but the last entry in this matrix was incorrect Signed-off-by: -
Geliang Tang authored
Drop .owner field in mtk_crypto_driver, since platform_driver_register() will set it automatically. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
George Cherian authored
Add more algorithm support for the driver. Add support for ecb(aes), cfb(aes) and ecb(des3_ede). Signed-off-by:
George Cherian <george.cherian@cavium.com> Signed-off-by:
-
George Cherian authored
Remove the individual encrypt/decrypt function for easch algorithm. This is in prepration of adding more crypto algorithms supported by hardware. While at that simplify create_ctx_hdr/create_input_list function interfaces. Signed-off-by:
-
George Cherian authored
Mailbox interrupt is common and it is not an error interrupt. So downgrade the print from dev_err to dev_dbg. Signed-off-by:
-
pjambhlekar authored
This change is to handle sparse warning. Return type of function is a pointer to the structure and it returns 0. Instead it should return NULL. Signed-off-by:
Pushkar Jambhlekar <pushkar.iit@gmail.com> Signed-off-by:
-
Gary R Hook authored
Expose some data about the configuration and operation of the CCP through debugfs entries: device name, capabilities, configuration, statistics. Allow the user to reset the counters to zero by writing (any value) to the 'stats' file. This can be done per queue or per device. Changes from V1: - Correct polarity of test when destroying devices at module unload Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
-
Martin Hicks authored
An updated patch that also handles the additional key length requirements for the AEAD algorithms. The max keysize is not 96. For SHA384/512 it's 128, and for the AEAD algorithms it's longer still. Extend the max keysize for the AEAD size for AES256 + HMAC(SHA512). Cc: <stable@vger.kernel.org> # 3.6+ Fixes: 357fb605 ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms") Signed-off-by:
Martin Hicks <mort@bork.org> Acked-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
- 10 Jun, 2017 18 commits
-
-
Ryder Lee authored
This patch removes the parent clock 'ethif' in bindings, since we don't need to control the parent of a clock in current clock framework. Moreover, the clocks are get by name in the driver, thus this change does not break backwards compatibility. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Ryder Lee authored
This patch removes redundant clock setting for 'clk_ethif', which is the parent of 'clk_cryp'. Hence, we just need to handle its child. Signed-off-by:
-
Tudor-Dan Ambarus authored
The test considers a party that already has a private-public key pair and a party that provides a NULL key. The kernel will generate the private-public key pair for the latter, computes the shared secret on both ends and verifies if it's the same. The explicit private-public key pair was copied from the previous test vector. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
Add support for generating ecc private keys. Generation of ecc private keys is helpful in a user-space to kernel ecdh offload because the keys are not revealed to user-space. Private key generation is also helpful to implement forward secrecy. If the user provides a NULL ecc private key, the kernel will generate it and further use it for ecdh. Move ecdh's object files below drbg's. drbg must be present in the kernel at the time of calling. Signed-off-by:
Stephan Müller <smueller@chronox.de> Signed-off-by:
-
Srikanth Jampala authored
Register the Symmetric crypto algorithms supported by CNN55XX driver with crypto subsystem. The following Symmetric crypto algorithms are supported, - aes with cbc, ecb, cfb, xts, ctr and cts modes - des3_ede with cbc and ecb modes Signed-off-by:
Srikanth Jampala <Jampala.Srikanth@cavium.com> Signed-off-by:
-
Srikanth Jampala authored
Add debugfs support in CNN55XX Physical Function driver. Provides hardware counters and firmware information. Signed-off-by:
-
Srikanth Jampala authored
Add Physical Function driver support for CNN55XX crypto adapters. CNN55XX adapters belongs to Cavium NITROX family series, which accelerate both Symmetric and Asymmetric crypto workloads. These adapters have crypto engines that need firmware to become operational. Signed-off-by:
-
Dan Carpenter authored
We forgot to set the error code on this path so it could result in returning NULL which leads to a NULL dereference. Fixes: db6c43bd ("crypto: KEYS: convert public key and digsig asym to the akcipher api") Signed-off-by:
-
Stephan Mueller authored
Initialise ctr_completion variable before use. Signed-off-by:
Harsh Jain <harshjain.prof@gmail.com> Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_akcipher_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. crypto_akcipher_maxsize() now returns an unsigned int. Remove the unnecessary check. Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_akcipher_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_akcipher_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_akcipher_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. Signed-off-by:
-
Tudor-Dan Ambarus authored
As of now, crypto_akcipher_maxsize() can not be reached without successfully setting the key for the transformation. akcipher algorithm implementations check if the key was set and then return the output buffer size required for the given key. Change the return type to unsigned int and always assume that this function is called after a successful setkey of the transformation. akcipher algorithm implementations will remove the check if key is not NULL and directly return the max size. Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_kpp_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_kpp_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. nbytes has no sense now, remove it and directly return the maxsize. Signed-off-by:
-
Tudor-Dan Ambarus authored
crypto_kpp_maxsize() asks for the output buffer size without caring for errors. It allways assume that will be called after a valid setkey. Comply with it and return what he wants. Signed-off-by:
-
Tudor-Dan Ambarus authored
As of now, crypto_kpp_maxsize() can not be reached without successfully setting the key for the transformation. kpp algorithm implementations check if the key was set and then return the output buffer size required for the given key. Change the return type to unsigned int and always assume that this function is called after a successful setkey of the transformation. kpp algorithm implementations will remove the check if key is not NULL and directly return the max size. Signed-off-by:
-
