- 07 Feb, 2016 40 commits
-
-
Aya Mahfouz authored
Constifies tty_port_operations structures in the tty driver since they are not modified after their initialization. Detected and found using Coccinelle. Suggested-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aya Mahfouz authored
Constifies tty_port_operations structure in the char driver since it is not modified after its initialization. Detected and found using Coccinelle. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Peter Hurley authored
The N_IRDA line discipline may access the previous line discipline's closed and already-fre private data on open [1]. The tty->disc_data field _never_ refers to valid data on entry to the line discipline's open() method. Rather, the ldisc is expected to initialize that field for its own use for the lifetime of the instance (ie. from open() to close() only). [1] ================================================================== BUG: KASAN: use-after-free in irtty_open+0x422/0x550 at addr ffff8800331dd068 Read of size 4 by task a.out/13960 ============================================================================= BUG kmalloc-512 (Tainted: G B ): kasan: bad access detected ----------------------------------------------------------------------------- ... Call Trace: [<ffffffff815fa2ae>] __asan_report_load4_noabort+0x3e/0x40 mm/kasan/report.c:279 [<ffffffff836938a2>] irtty_open+0x422/0x550 drivers/net/irda/irtty-sir.c:436 [<ffffffff829f1b80>] tty_ldisc_open.isra.2+0x60/0xa0 drivers/tty/tty_ldisc.c:447 [<ffffffff829f21c0>] tty_set_ldisc+0x1a0/0x940 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff829da49e>] tty_ioctl+0xace/0x1fd0 drivers/tty/tty_io.c:2883 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff816708ac>] do_vfs_ioctl+0x57c/0xe60 fs/ioctl.c:607 [< inline >] SYSC_ioctl fs/ioctl.c:622 [<ffffffff81671204>] SyS_ioctl+0x74/0x80 fs/ioctl.c:613 [<ffffffff852a7876>] entry_SYSCALL_64_fastpath+0x16/0x7a Reported-and-tested-by:Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Jiri Slaby authored
The class of 4 n_hdls buf locks is the same because a single function n_hdlc_buf_list_init is used to init all the locks. But since flush_tx_queue takes n_hdlc->tx_buf_list.spinlock and then calls n_hdlc_buf_put which takes n_hdlc->tx_free_buf_list.spinlock, lockdep emits a warning: ============================================= [ INFO: possible recursive locking detected ] 4.3.0-25.g91e30a7-default #1 Not tainted --------------------------------------------- a.out/1248 is trying to acquire lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] but task is already holding lock: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&list->spinlock)->rlock); lock(&(&list->spinlock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by a.out/1248: #0: (&tty->ldisc_sem){++++++}, at: [<ffffffff814c9eb0>] tty_ldisc_ref_wait+0x20/0x50 #1: (&(&list->spinlock)->rlock){......}, at: [<ffffffffa01fdc07>] n_hdlc_tty_ioctl+0x127/0x1d0 [n_hdlc] ... Call Trace: ... [<ffffffff81738fd0>] _raw_spin_lock_irqsave+0x50/0x70 [<ffffffffa01fd020>] n_hdlc_buf_put+0x20/0x60 [n_hdlc] [<ffffffffa01fdc24>] n_hdlc_tty_ioctl+0x144/0x1d0 [n_hdlc] [<ffffffff814c25c1>] tty_ioctl+0x3f1/0xe40 ... Fix it by initializing the spin_locks separately. This removes also reduntand memset of a freshly kzallocated space. Signed-off-by:Jiri Slaby <jslaby@suse.cz> Reported-by:
-
Alexey Khoroshilov authored
synclinkmp_init_one() ignores all errors and does not release all resources if something fails. The patch adds returned code to device_init() and add_device() and proper error handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Saurabh Sengar authored
use memdup_user rather than duplicating implementation. found by coccinelle Signed-off-by:
Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/tty/Kconfig:config PPC_EPAPR_HV_BYTECHAN drivers/tty/Kconfig: bool "ePAPR hypervisor byte channel driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/tty/hvc/Kconfig:config HVC_CONSOLE drivers/tty/hvc/Kconfig: bool "pSeries Hypervisor Virtual Console support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. We don't replace module.h with init.h since the file already has that. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Anton Blanchard <anton@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
Anton Wuerfel authored
This patch removes redundant 8250 port initialization macros and replaces them by a single generic base-macro, which is specialized as needed. Signed-off-by:
Anton Würfel <anton.wuerfel@fau.de> Signed-off-by:
Phillip Raffeck <phillip.raffeck@fau.de> Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Anton Wuerfel authored
Checkpatch complains about incorrect indentation of switch/case statements. This patch fixes the corresponding warnings. Additionally some indentation is changed to match the correct format specified in the Linux Kernel Coding Style. Signed-off-by:
-
Anton Wuerfel authored
This patch refactors a switch case statement by merging an if condition in the default case into an identical condition right after the switch statement. This comes with a slight change in behaviour: If pci_netmos_9900_numports returns 0, an additional warning is printed. Signed-off-by:
-
Anton Wuerfel authored
This patch fixes compiler warnings about wrong conversion specifiers used in a debug output in 8250_pnp.c. The precise warning is: drivers/tty/serial/8250/8250_pnp.c: In function ‘serial_pnp_probe’: include/linux/dynamic_debug.h:64:16: warning: format ‘%x’ expects argument of [...] drivers/tty/serial/8250/8250_pnp.c:467:2: note: in expansion of macro ‘dev_dbg’ dev_dbg(&dev->dev, ^ include/linux/dynamic_debug.h:64:16: warning: format ‘%lx’ expects argument of [...] drivers/tty/serial/8250/8250_pnp.c:467:2: note: in expansion of macro ‘dev_dbg’ dev_dbg(&dev->dev, ^ Those warnings never got triggered, because the command was nested in an #ifdef, which is removed by a patch of this series. Signed-off-by:
-
Phillip Raffeck authored
This patch removes the macro SERIAL_DEBUG_PNP, which is used to enable debugging at compile time. As SERIAL_DEBUG_PNP is an orphan, the corresponding #ifdef is removed. To keep the ability to enable debugging at compile time, the call to printk(KERN_DEBUG ...) is replaced by a corresponding call to dev_dbg(), which is configurable via CONFIG_DYNAMIC_DEBUG. Signed-off-by:
-
Phillip Raffeck authored
This patch replaces printk by the corresponding variant of dev_* in order to fix checkpatch warnings. If no suitable device pointer is present, the corresponding pr_* variant is used. Signed-off-by:
-
Anton Wuerfel authored
Merged user-visible multi-line strings into a single line according to the Linux Kernel Coding Style, which allows user-visible strings to exceed the maximum line length of 80 characters. The main reason for this is to facilitate grepping for these strings. However, some strings were ignored in this patch, because the use of format specifiers breaks the ability to grep anyway. Signed-off-by:
-
Anton Wuerfel authored
This patch fixes a checkpatch warning caused by missing parentheses in the definition of a macro. Furthermore redundant parentheses are removed in an assignment. Signed-off-by:
-
Anton Wuerfel authored
Fixed checkpatch warning about an unnecessary line continuation in a multi-line variable assignment. Signed-off-by:
-
Anton Wuerfel authored
This patch moves EXPORT_SYMBOL macros directly after the definition of the corresponding symbol to remove checkpatch warnings. Signed-off-by:
-
Anton Wuerfel authored
This patch fixes checkpatch warnings about unnecessary else blocks after return statements. Signed-off-by:
-
Anton Wuerfel authored
Checkpatch outputs some warnings about incorrect comment style, which is fixed by this patch. Signed-off-by:
-
Anton Wuerfel authored
This patch fixes a checkpatch warning by moving an opening curly brace to its correct position. Signed-off-by:
-
Anton Wuerfel authored
Indentation is changed to match the correct format of using tabs instead of spaces wherever possible. Signed-off-by:
-
Anton Wuerfel authored
This patch fixes whitespace errors reported by checkpatch to increase readability. Main focus is on missing spaces after commas in function headers and macros (like foo,bar edited to foo, bar). Signed-off-by:
-
Maciej W. Rozycki authored
Transmit interrupts are disabled and the transmit buffer drained in the course of console output so that polled transmission is possible. That however causes a lost transmit interrupt as the TxIP bit in RR3 is only set on a transmit buffer full-to-empty transition and then iff transmit interrupts are enabled at the same time. Consequently if console output disturbs a regular transmission in progress, the TxIP bit is never set again and the transmission locks up waiting for a transmit interrupt. Fix the problem by restarting transmission manually rather than waiting for a transmit interrupt that will never happen. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Martin Sperl authored
The bcm2835 SOC contains an auxiliary uart, which is very close to the ns16550 with some differences. The big difference is that the uart HW is not using an internal divider of 16 but 8, which results in an effictive baud-rate being twice the requested baud-rate. This driver handles this device correctly and handles the difference in the HW divider by scaling up the clock by a factor of 2. The approach to write a separate (wrapper) driver instead of using a multiplying clock and "ns16550" as compatibility in the device-tree has been recommended by Stephen Warren. Signed-off-by:
Martin Sperl <kernel@martin.sperl.org> Acked-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Martin Sperl authored
Add binding documentation for the bcm2835-aux-uart driver. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Wang Dongsheng authored
Suspend/resume functions should work for 8250_of driver. Signed-off-by:
Wang Dongsheng <dongsheng.wang@nxp.com> Signed-off-by:
-
Jean Delvare authored
DRIVER_NAME is too generic to be used in a driver-specific platform data file. Use a name specific to the driver instead, to avoid collisions. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by:
-
Rich Felker authored
The uartlite driver suffers from missing/duplicate/corrupted character data when the interrupt handler runs concurrently with access to the device from another cpu. Take the port spinlock to exclude concurrent access. Signed-off-by:
Rich Felker <dalias@libc.org> Signed-off-by:
-
Rich Felker authored
Microblaze currently uses the old earlyprintk system, rather than the unified earlycon support, to show boot messages on uartlite. Add earlycon support so that other archs using uartlite can benefit from it. The new code in uartlite.c is copied almost verbatim from arch/microblaze/kernel/early_printk.c. Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/tty/serial/8250/Kconfig:config SERIAL_8250_INGENIC drivers/tty/serial/8250/Kconfig: bool "Support for Ingenic SoC serial ports" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: linux-serial@vger.kernel.org Signed-off-by:
-
Simon Horman authored
Simply document new compat strings. There appears to be no need for a driver updates. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Jeffy Chen authored
Currently, when tring to set up a serial console with a higher baud rate, it would fallback to 921600. Tested-by:
Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by:
-
Geert Uytterhoeven authored
Add support for sparse variable sampling rates on SCIFA and SCIFB. According to the datasheet, sampling rate 1/5 needs a small quirk to avoid corrupting the first byte received. This increases the range and accuracy of supported baud rates. E.g. on r8a7791/koelsch: - Supports now 134, 150, and standard 500000-4000000 bps, - Perfect match for 134, 150, 500000, 1000000, 2000000, and 4000000 bps, - Accuracy has increased for most standard bps values. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
Replace the single sampling rate and special handling for HSCIF's variable sampling rates by a bitmask and a custom iterator. This prepares for the advent of SCIFA/SCIFB's sparse variable sampling rates. Signed-off-by:
-
Geert Uytterhoeven authored
On SCIx variants different from HSCIF, the bit rate is equal to the sampling clock rate divided by half the sampling rate. Currently this is handled by dividing the sampling rate by two, which was OK as it was always even. Replace halving the sampling rate by premultiplying the base clock frequency by 2, to accommodate odd sampling rates on SCIFA/SCIFB later. Replace the shift value in the BRG divider calculation by a premultiplication of the base clock frequency too, for consistency. Signed-off-by:
-
Geert Uytterhoeven authored
SCIFA and SCIFB have additional bit rate config bits in the Serial Mode Register. Don't touch them when using the port as a serial console, as we rely on the boot loader to have configured the serial port config. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Martin Fuzzey authored
When a non console i.MX UART is enabled in the device tree, system suspend fails due to an unprepared clock: [ 638.794563] PM: Syncing filesystems ... done. [ 638.878902] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 638.888454] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 638.996697] PM: suspend of devices complete after 97.200 msecs [ 639.002611] PM: suspend devices took 0.100 seconds [ 639.013020] PM: late suspend of devices complete after 2.288 msecs [ 639.021486] ------------[ cut here ]------------ [ 639.026147] WARNING: CPU: 0 PID: 488 at drivers/clk/clk.c:732 clk_core_enable+0xc0/0x12c() [ 639.034413] Modules linked in: [ 639.037490] CPU: 0 PID: 488 Comm: system_server Tainted: G W 4.4.0-rc5-pknbsp-svn2214-atag-v4.4-rc5-121-gebfd9cb #1304 [ 639.049312] Hardware name: Freescale i.MX53 (Device Tree Support) [ 639.055444] [<c0016d54>] (unwind_backtrace) from [<c00140f8>] (show_stack+0x20/0x24) [ 639.063199] [<c00140f8>] (show_stack) from [<c02c99a0>] (dump_stack+0x20/0x28) [ 639.070442] [<c02c99a0>] (dump_stack) from [<c0024ca8>] (warn_slowpath_common+0x88/0xc0) [ 639.078541] [<c0024ca8>] (warn_slowpath_common) from [<c0024d0c>] (warn_slowpath_null+0x2c/0x34) [ 639.087332] [<c0024d0c>] (warn_slowpath_null) from [<c05171e8>] (clk_core_enable+0xc0/0x12c) [ 639.095777] [<c05171e8>] (clk_core_enable) from [<c05172f8>] (clk_enable+0x2c/0x40) [ 639.103441] [<c05172f8>] (clk_enable) from [<c0349880>] (imx_serial_port_suspend_noirq+0x20/0xe0) [ 639.112336] [<c0349880>] (imx_serial_port_suspend_noirq) from [<c03a26a0>] (dpm_run_callback+0x68/0x16c) [ 639.121825] [<c03a26a0>] (dpm_run_callback) from [<c03a2898>] (__device_suspend_noirq+0xf4/0x22c) [ 639.130705] [<c03a2898>] (__device_suspend_noirq) from [<c03a4b0c>] (dpm_suspend_noirq+0x148/0x30c) [ 639.139764] [<c03a4b0c>] (dpm_suspend_noirq) from [<c00511d4>] (suspend_devices_and_enter+0x2e8/0x6a4) [ 639.149078] [<c00511d4>] (suspend_devices_and_enter) from [<c00518a0>] (pm_suspend+0x310/0x4b8) [ 639.157782] [<c00518a0>] (pm_suspend) from [<c00500ec>] (state_store+0x7c/0xcc) [ 639.165099] [<c00500ec>] (state_store) from [<c02cb6dc>] (kobj_attr_store+0x1c/0x28) [ 639.172858] [<c02cb6dc>] (kobj_attr_store) from [<c01633d4>] (sysfs_kf_write+0x54/0x58) [ 639.180871] [<c01633d4>] (sysfs_kf_write) from [<c01629b4>] (kernfs_fop_write+0x100/0x1c8) [ 639.189152] [<c01629b4>] (kernfs_fop_write) from [<c00fb8b8>] (__vfs_write+0x3c/0xe8) [ 639.196991] [<c00fb8b8>] (__vfs_write) from [<c00fc810>] (vfs_write+0xa4/0x160) [ 639.204307] [<c00fc810>] (vfs_write) from [<c00fcac4>] (SyS_write+0x4c/0x98) [ 639.211363] [<c00fcac4>] (SyS_write) from [<c0010760>] (ret_fast_syscall+0x0/0x3c) This does not happen for the common case of a single UART used as a console (since imx_console_setup() already does a prepare) Signed-off-by:
Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by:
-
Soren Brinkmann authored
start_tx and the ISR used largely identical code to transmit data. Consolidate that in one place. Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
-
