- 08 Nov, 2011 27 commits
-
-
Hans Verkuil authored
These are really, really old drivers. These are really no longer experimental... Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
USB webcams are some of the most used V4L devices, so move it to a more prominent place in the menu instead of being at the end. Signed-off-by:
-
Jean Delvare authored
The support for 10-bit I2C addresses in usbvision seems plain broken to me. I had already noticed that back in February 2007 [1]. The code was not fixed since then, so I take it that it's not actually needed. And as a matter of fact I don't know of any 10-bit addressed I2C tuner, encode, decoder or the like. So let's simply get rid of the broken and useless code. I'm also adding I2C_FUNC_I2C, as the driver and hardware support plain I2C messaging. [1] http://marc.info/?l=linux-i2c&m=117499415208244&w=2Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Malcolm Priestley authored
This indeed a clone of Kworld UB499 2T Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Sylwester Nawrocki authored
Remove pre-processor defined as10x_handle_t data type by directly replacing it with struct as102_bus_adapter_t. phandle is renamed to adap inside function bodies. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Sylwester Nawrocki <snjw23@gmail.com> Signed-off-by:
-
Sylwester Nawrocki authored
Supresses following checkpatch warning: WARNING: static const char * array should probably be static const char * const Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
Fixes following checkpatch.pl warning: WARNING: externs should be avoided in .c files Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
The as10x_cmd.h header is not public so there should be no need for an "extern "C"" in it. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
While at it also correct some spelling errors. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
Remove some unnecessary braces. Replace spaces with tabs where expected. Replace gcc specific __FUNCTION__ with C99 __func__. No functional changes. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
Release already acquired resources when error happens during devices registration steps. Use dev_err() where struct device is available, instead of driver specific err(). Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Piotr Chmura <chmooreck@poczta.onet.pl> Signed-off-by:
-
Sylwester Nawrocki authored
It doesn't seem to be of much advantage to compile in FW_LOADER support conditionally, then make the driver always select FW_LOADER and remove #idefs from the code. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
SPI bus driver support is not included in this module, the SPI driver files are missing. But some bits are still present so clean up the unused code. The SPI driver support can be properly added later if needed. Then CONFIG_AS102_SPI and CONFIG_AS102_USB is now not needed and the pre-processor statements using these config options can now be removed from *.c files. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Sylwester Nawrocki authored
According to the kernel coding rules typedefs should be avoided, so replace theit occurances with explicit enum/union types. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Piotr Chmura authored
Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Malcolm Priestley authored
Correction of reading from frontend and represents a SNR nonlinear scale of minimum signal to full signal. Signed-off-by:
-
Peter De Schrijver authored
add support for conexant PCI device 0x36c. Seems to be fully compatible with the currently supported chips, yet the chip has different PCI ID. Signed-off-by:
Peter De Schrijver <p2@psychaos.be> Signed-off-by:
-
Peter De Schrijver authored
The following patch adds support for the Tongwei Video Technology TD-3116 board. This is a Bt878 based capture card with 16 inputs meant for surveilance applications. It also offers a way to check which inputs have a video signal while capturing another input. In addition there are a number of alarm inputs and outputs available and there is microcontroller which is presumably intended for use as a system watchdog. None of these extra capabilities are supported by the patch. Signed-off-by:
-
Malcolm Priestley authored
IT9135 devices do support USB 1. Support added with restricton on pid count to 5. IT9137 devices wil not connect in USB 1 mode. Signed-off-by:
-
Javier Martinez Canillas authored
64933337 [media] tvp5150: Add video format registers configuration values Added constants for each video standard supported by TVP5150, so this patch get rid of the magic numbers. Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by:
-
Kamil Debski authored
G2D is a 2D graphics accelerator engine present in the s5p family of Samsung SoCs. It is capable of bitblt and raster operations on images having dimensions of up to 8000x8000. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Michael Krufky authored
Reported-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Reported-by:
-
Michael Krufky authored
Reported-by:
-
- 07 Nov, 2011 13 commits
-
-
Josh Boyer authored
The ttusb2_msg function uses on-stack variables to submit commands to dvb_usb_generic. This eventually gets to the DMA api layer and will throw a traceback if the debugging options are set. This allocates the temporary buffer variables with kzalloc instead. Fixes https://bugzilla.redhat.com/show_bug.cgi?id=734506Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
-
tvboxspy authored
Amend adc table entries and size. Signed-off-by:
-
Malcolm Priestley authored
Support for version 2 type chips and other LNA versions of version 1 Scripts may be compressed slightly at a later stage. TODO Firmware loader However, things are a little confusing, it is not clear that dvb-usb-it9137-01.fw does not work with version 2 chips as in recent files both firmwares are the same. Should be applied to: 8133 Support for single ITE 9135 device. Signed-off-by:
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
-
Michael Krufky authored
As done first in lgdt330x.c, calculate signal strength from SNR up to 35dB Even though the SNR can go higher than 35dB, there is some comfort factor in having a range of strong signals that can show at 100% Signed-off-by:
-
Julia Lawall authored
In the original code, probe_out could be reached when res was null and then when the irq had not yet been requested. In those cases, the call to free_irq is not needed, so move probe_out down and introduce a new label for the case where calling free_irq is useful. The semantic match that finds this problem is as follows: // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
The variable isi might be null or might be freed at the point of the call to clk_put. pclk contains the value that isi->pclk is expected to point to. The semantic match that finds this problem is as follows: // <smpl> @r@ expression E, E1; identifier f; statement S1,S2,S3; @@ if (E == NULL) { ... when != if (E == NULL || ...) S1 else S2 when != E = E1 *E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: -
Christian Gmeiner authored
The ADV7170/ADV7171 can operate in either 8-bit or 16-bit YCrCb Mode. * 8-Bit YCrCb Mode This default mode accepts multiplexed YCrCb inputs through the P7-P0 pixel inputs. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. The Y, Cb and Cr data are input on a rising clock edge. * 16-Bit YCrCb Mode This mode accepts Y inputs through the P7–P0 pixel inputs and multiplexed CrCb inputs through the P15–P8 pixel inputs. The data is loaded on every second rising edge of CLOCK. The inputs follow the sequence Cb0, Y0 Cr0, Y1 Cb1, Y2, etc. Signed-off-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
Write AUX byte to FM1216ME_MK3 when FM mode, better sensitivity. It can be usefull for other tuners. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Daniel Drake authored
The RGB mode does not work correctly. It captures fine at 640x480 but whenever the scaling engine is used to produce another resolution, color corruption occurs (lots of erroneous pink and green). It is not clear how the scaling engine is supposed to work and how it knows which pixel format it is dealing with. Work around this problem by disabling RGB support. YUYV scaling works just fine. Test case: gst-launch v4l2src ! video/x-raw-rgb,bpp=16,width=320,height=240 ! \ ffmpegcolorspace ! xvimagesink Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Re-run the cardlist script, in order to update the cardlists for a few drivers, to sync with the driver changes. Signed-off-by: -
sensoray-dev authored
commit affebd4db94b459f676a14d9bb696c3c2b73643d [media] bttv: adding Sensoray 611 board to bttv driver Signed-off-by:
Dean Anderson <linux-dev@sensoray.com> Signed-off-by:
-
