- 28 Jun, 2017 19 commits
-
-
Gustavo A. R. Silva authored
Check return value from call to wl18xx_top_reg_write(), so in case of error jump to goto label out and return. Also, remove unnecessary value check before goto label out. Addresses-Coverity-ID: 1226938 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Dan Carpenter authored
The kstrtoul() test was reversed so this always returned -ENOTSUPP. Fixes: 27d7f477 ("net: wireless: replace strict_strtoul() with kstrtoul()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
James Cameron <quozl@laptop.org> Signed-off-by:
-
Bhumika Goyal authored
Declare hwbus_ops structures as const as they are only passed as an argument to the function cw1200_core_probe. This argument is of type const. So, make these structures const. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Colin Ian King authored
Two recent commits added new RSI_FSM_STATES (namely FSM_FW_NOT_LOADED and FSM_COMMON_DEV_PARAMS_SENT) and the corresponding table fsm_state was not updated to match. This can lead to an array overrun when accessing the latter two states in fsm_state. Fix this by adding in the missing states. Detected by CoverityScan, CID#1398379 ("Illegal address computation") Fixes: 9920322c ("rsi: add tx frame for common device configuration") Fixes: 015e3674 ("rsi: Register interrupt handler before firmware load") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Arend Van Spriel authored
Since Cypress took over IoT part of Broadcom some chips supported by brcmfmac moved over as well. Adding maintainer info of our peers at Cypress to make their support official. Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Arend Van Spriel authored
Since commit 9cc4b7cb ("brcmfmac: Make skb header writable before use") the headroom usage has been fixed. However, the driver was keeping statistics that got lost. So reworking the code so we get those driver statistics back for debugging. Cc: James Hughes <james.hughes@raspberrypi.org> Reviewed-by:
-
Arend Van Spriel authored
The statistic counter is used in common layer and in the bus layer in different thread contexts so change to use atomic operations. Reviewed-by:
-
Arend Van Spriel authored
A couple of old fields were still described and one field was not described. Reviewed-by:
-
Ganapathi Bhat authored
When user adds a virtual interface driver will set the bss_type to the iface_type given by the user. When supplicant is started on the same interface, a call to change_virtual_intf will be triggered if if_type is not NL80211_IFTYPE_STATION. Here driver should not update it's bss_type, because bss_type is intended to indicate the original iface_type and changing the same will defeat the purpose of creating this interface. Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Ping-Ke Shih authored
If wifi is in 4way, btcoex give wifi higher priority to use antenna. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Check beacon and probe_resp frames to know ap_num Signed-off-by:
-
Ping-Ke Shih authored
If there are many AP (dirty environment), we use another strategy set to resolve coex issue. Signed-off-by:
-
Ping-Ke Shih authored
We will use return value to handle error case. Signed-off-by:
-
Ping-Ke Shih authored
Return value may be false in some situations. Signed-off-by:
-
Ping-Ke Shih authored
Change the parameters suggested by FW. awake int: 2 smart_ps: 2 or 0 ps_mode: 2 (MAX -- every DTIM) Signed-off-by:
-
Ping-Ke Shih authored
Modify 8723be and 8192e only. 8812/8821 do IQK in DM, so we may do it later. Signed-off-by:
-
Ping-Ke Shih authored
In this case, BTC asks to enter/leave PS mode frequently to cause A2DP choppy. Signed-off-by:
-
Colin Ian King authored
The return value ret is unitialized and garbage is being returned for the three different error conditions when setting up the PCIe BARs. Fix this by initializing ret to -ENOMEM to indicate that the BARs failed to be setup correctly. Detected by CoverityScan, CID#1437563 ("Unitialized scalar variable") Signed-off-by:Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2017-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next More iwlwifi patches for 4.13 * Some changes in suspend/resume handling to support new FWs; * A bunch of RF-kill related fixes; * Continued work towards the A000 family; * Support for a new version of the TX flush FW API; * Some fixes in monitor interfaces; * A few fixes in the recovery flows; * Johannes' documentation fixes and FW API struct cleanups continue; * Remove some noise from the kernel logs; * Some other small improvements, fixes and cleanups;
-
- 27 Jun, 2017 9 commits
-
-
Christophe Jaillet authored
If 'wiphy_new()' fails, we leak 'ops'. Add a new label in the error handling path to free it in such a case. Cc: stable@vger.kernel.org Fixes: 5c22fb85 ("brcmfmac: add wowl gtk rekeying offload support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Arend Van Spriel authored
The function brcmf_net_attach() can only fail when register_netdevice() fails. When this happens register_netdevice() calls priv_destructor, ie. brcmf_cfg80211_free_netdev() freeing the vif instance. Also upon this failure brcmf_net_attach() calls free_netdev(). However, callers are also doing cleanup resulting in double free. In some places they need netdev private space as it holds parameters to communicate with the device. So we want to do the cleanup only in callers of brcmf_net_attach() by making the following changes: - set priv_destructor after register_netdevice() succeeds. - remove call to free_netdev() in brcmf_net_attach(). - call free_netdev() in brcmf_net_detach() for unregistered netdev. - add free_netdev() if brcmf_net_attach() fails for a created interface. Fixes: cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.") Reviewed-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in en_dbg debug message Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Matthias Schiffer says: ==================== net: add netlink_ext_ack support to rtnl_link_ops Same changes as http://patchwork.ozlabs.org/patch/780351/ , split into separate patches for each rtnl_link_ops field as requested. ==================== Signed-off-by:
-
Matthias Schiffer authored
Add support for extended error reporting. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Matthias Schiffer authored
Add support for extended error reporting. Signed-off-by:
-
Matthias Schiffer authored
Add support for extended error reporting. Signed-off-by:
-
Matthias Schiffer authored
Add support for extended error reporting. Signed-off-by:
-
Matthias Schiffer authored
Add support for extended error reporting. Signed-off-by:
-
- 25 Jun, 2017 12 commits
-
-
Michael Grzeschik authored
In case the MACB is directly connected to a non-mdio PHY/device, it should be possible to provide a fixed link configuration in the DT. Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-06-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 New features and bug fixes to quite a few different drivers, but nothing really special standing out. What makes me happy that we have now more vendors actively contributing to upstream drivers. In this pull request we have patches from Broadcom, Intel, Qualcomm, Realtek and Redpine Signals, and I still have patches from Marvell and Quantenna pending in patchwork. Now that's something comparing to how things looked 11 years ago in Jeff Garzik's "State of the Union: Wireless" email: https://lkml.org/lkml/2006/1/5/671 Major changes: wil6210 * add low level RF sector interface via nl80211 vendor commands * add module parameter ftm_mode to load separate firmware for factory testing * support devices with different PCIe bar size * add support for PCIe D3hot in system suspend * remove ioctl interface which should not be in a wireless driver ath10k * go back to using dma_alloc_coherent() for firmware scratch memory * add per chain RSSI reporting brcmfmac * add support multi-scheduled scan * add scheduled scan support for specified BSSIDs * add support for brcm43430 revision 0 wlcore * add wil1285 compatible rsi * add RS9113 USB support iwlwifi * FW API documentation improvements (for tools and htmldoc) * continuing work for the new A000 family * bump the maximum supported FW API to 31 * improve the differentiation between 8000, 9000 and A000 families ==================== Signed-off-by:
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: RFC 4960 Errata fixes This patchset contains fixes for 4 Errata topics from https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01 Namely, sections: 3.12. Order of Adjustments of partial_bytes_acked and cwnd 3.22. Increase of partial_bytes_acked in Congestion Avoidance 3.26. CWND Increase in Congestion Avoidance Phase 3.27. Refresh of cwnd and ssthresh after Idle Period Tests performed with netperf using net namespaces, with drop rates at 0%, 0.5% and 1% by netem, IPv4 and IPv6, 10 runs for each combination. I couldn't spot differences on the stats. With and without these patches the results vary in a similar way in terms of throughput and retransmissions. Tests with 20ms delay and 20ms delay + drops at 0.5% and 1% also had results in a similar way, no noticeable difference. Looking at cwnd, it was possible to notice slightly lower values being used while still sustaining same throughput profile. ==================== Signed-off-by:
-
Marcelo Ricardo Leitner authored
RFC 4960 Errata 3.27 identifies that ssthresh should be adjusted to cwnd because otherwise it could cause the transport to lock into congestion avoidance phase specially if ssthresh was previously reduced by some packet drop, leading to poor performance. The Errata says to adjust ssthresh to cwnd only once, though the same goal is achieved by updating it every time we update cwnd too. The caveat is that we could take longer to get back up to speed but that should be compensated by the fact that we don't adjust on RTO basis (as RFC says) but based on Heartbeats, which are usually way longer. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.27Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
RFC4960 Errata 3.26 identified that at the same time RFC4960 states that cwnd should never grow more than 1*MTU per RTT, Section 7.2.2 was underspecified and as described could allow increasing cwnd more than that. This patch updates it so partial_bytes_acked is maxed to cwnd if flight_size doesn't reach cwnd, protecting it from such case. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.26Signed-off-by:
-
Marcelo Ricardo Leitner authored
As per RFC4960 Errata 3.22, this condition is not needed anymore as it could cause the partial_bytes_acked to not consider the TSNs acked in the Gap Ack Blocks although they were received by the peer successfully. This patch thus drops the check for new Cumulative TSN Ack Point, leaving just the flight_size < cwnd one. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.22Signed-off-by:
-
Marcelo Ricardo Leitner authored
RFC4960 Errata 3.12 says RFC4960 is unclear about the order of adjustments applied to partial_bytes_acked and cwnd in the congestion avoidance phase, and that the actual order should be: partial_bytes_acked is reset to (partial_bytes_acked - cwnd). Next, cwnd is increased by MTU. We were first increasing cwnd, and then subtracting the new value pba, which leads to a different result as pba is smaller than what it should and could cause cwnd to not grow as much. See-also: https://tools.ietf.org/html/draft-ietf-tsvwg-rfc4960-errata-01#section-3.12Signed-off-by:
-
Mintz, Yuval authored
Looks like commit f663dd9a ("net: core: explicitly select a txq before doing l2 forwarding") has removed the need for this dedicated xmit function [it even explicitly states so in its commit log message] but it hasn't removed the definition of the ndo. Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> CC: Jason Wang <jasowang@redhat.com> CC: John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
David S. Miller authored
Timur Tabi says: ==================== net: qcom/emac: various minor improvements A collection of minor fixes and features to the Qualcomm Technologies EMAC network driver. ==================== Signed-off-by: -
Timur Tabi authored
On emulation systems, the EMAC's internal PHY ("SGMII") is not present, but is not needed for network functionality. So just display a warning message and ignore the SGMII. Tested-by:Philip Elcan <pelcan@codeaurora.org> Tested-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
Timur Tabi authored
On ACPI systems, the driver depends on firmware pre-initializing the EMAC because we don't have access to the clocks, and the EMAC has specific clock programming requirements. Therefore, we don't want to reset the EMAC while we are completing the initialization. Tested-by:
Richard Ruigrok <rruigrok@codeaurora.org> Signed-off-by:
-
Timur Tabi authored
The shutdown function halts all DMA and interrupts, so that all operations are discontinued when the system shuts down, e.g. via kexec or a forced reboot. Tested-by:
Tyler Baicar <tbaicar@codeaurora.org> Signed-off-by:
-
