- 17 Feb, 2014 19 commits
-
-
Andreas Gruenbacher authored
Rename functions conn_destroy() -> drbd_destroy_connection(), drbd_minor_destroy() -> drbd_destroy_device() drbd_adm_add_minor() -> drbd_adm_add_minor() drbd_adm_delete_minor() -> drbd_adm_del_minor() Rename global variable minors to drbd_devices Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
In a setup where a device (aka volume) can replicate to multiple peers and one connection can be shared between multiple devices, we need separate objects to represent devices on peer nodes and network connections. As a first step to introduce multiple connections per device, give each drbd_device object a single drbd_peer_device object which connects it to a drbd_connection object. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
sed -i -e 's:all_tconn:connections:g' -e 's:tconn:connection:g' Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
sed -i -e 's:mdev:device:g' Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
sed -i -e 's:\<drbd_conf\>:drbd_device:g' Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
Keep the protocol definitions separate from the kernel code; they are useful in their own right. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
The following commits will successively transform DRBD into the structure described here. Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Andreas Gruenbacher authored
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Philipp Reisner authored
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
-
Rashika Kheria authored
Remove unused function drbd_bm_write_lazy() in drbd/drbd_bitmap.c. This eliminates the following warning in drbd/drbd_bitmap.c: drivers/block/drbd/drbd_bitmap.c:1208:5: warning: no previous prototype for ‘drbd_bm_write_lazy’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark function seq_printf_with_thousands_grouping() as static in drbd/drbd_proc.c because it is not used outside this file. This eliminates the following warning in drbd/drbd_proc.c: drivers/block/drbd/drbd_proc.c:49:6: warning: no previous prototype for ‘seq_printf_with_thousands_grouping’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark functions drbd_endio_read_sec_final(), drbd_send_barrier(), need_to_send_barrier(), dequeue_work_batch(), dequeue_work_item() and wait_for_work() as static in drbd/drbd_worker.c because they are not used outside this file. This eliminates the following warnings in drbd/drbd_worker.c: drivers/block/drbd/drbd_worker.c:99:6: warning: no previous prototype for ‘drbd_endio_read_sec_final’ [-Wmissing-prototypes] drivers/block/drbd/drbd_worker.c:1276:5: warning: no previous prototype for ‘drbd_send_barrier’ [-Wmissing-prototypes] drivers/block/drbd/drbd_worker.c:1774:6: warning: no previous prototype for ‘need_to_send_barrier’ [-Wmissing-prototypes] drivers/block/drbd/drbd_worker.c:1798:6: warning: no previous prototype for ‘dequeue_work_batch’ [-Wmissing-prototypes] drivers/block/drbd/drbd_worker.c:1806:6: warning: no previous prototype for ‘dequeue_work_item’ [-Wmissing-prototypes] drivers/block/drbd/drbd_worker.c:1815:6: warning: no previous prototype for ‘wait_for_work’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Move prototype declaration of functions drbdd_init() and drbd_asender() from drbd/drbd_main.c to header file drbd/drbd_int.h because these functions are used by more than one file. This eliminates the following warning in drbd/drbd_receiver.c: drivers/block/drbd/drbd_receiver.c:4836:5: warning: no previous prototype for ‘drbdd_init’ [-Wmissing-prototypes] drivers/block/drbd/drbd_receiver.c:5245:5: warning: no previous prototype for ‘drbd_asender’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark functions conn_wait_active_ee_empty() and drbd_crypto_alloc_digest_safe() as static in drbd/drbd_receiver.c because they are not used outside this file. This eliminates the following warning in drbd/drbd_receiver.c: drivers/block/drbd/drbd_receiver.c:1401:6: warning: no previous prototype for ‘conn_wait_active_ee_empty’ [-Wmissing-prototypes] drivers/block/drbd/drbd_receiver.c:3259:21: warning: no previous prototype for ‘drbd_crypto_alloc_digest_safe’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark functions drbd_request_prepare() and find_oldest_request() as static in drbd/drbd_req.c because they are not used outside this file. This eliminates the following warnings in drbd/drbd_req.c: drivers/block/drbd/drbd_req.c:1037:1: warning: no previous prototype for ‘drbd_request_prepare’ [-Wmissing-prototypes] drivers/block/drbd/drbd_req.c:1323:22: warning: no previous prototype for ‘find_oldest_request’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
drivers: block: Move prototype declaration of function tl_abort_disk_io() to appropriate header file from drbd_state.c Move the prototype declaration of function tl_abort_disk_io() from drbd/drbd_state.c to appropriate header file drbd/drbd_int.h because it is used by more than 2 files. This eliminates the following warnings in drbd/drbd_main.c: drivers/block/drbd/drbd_main.c:310:6: warning: no previous prototype for ‘tl_abort_disk_io’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark the function drbd_al_begin_io_prepare() as static in drbd/drbd_actlog.c because it is not used outside this file. This eliminates the following warnings in drbd/drbd_actlog.c: drivers/block/drbd/drbd_actlog.c:277:6: warning: no previous prototype for ‘drbd_al_begin_io_prepare’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark functions conn_khelper(), nla_put_drbd_cfg_context(), nla_put_status_info() and get_one_status() as static in drbd/drbd_nl.c because they are not used outside this file. This eliminates the following warnings in drbd/drbd_nl.c: drivers/block/drbd/drbd_nl.c:365:5: warning: no previous prototype for ‘conn_khelper’ [-Wmissing-prototypes] drivers/block/drbd/drbd_nl.c:2727:5: warning: no previous prototype for ‘nla_put_drbd_cfg_context’ [-Wmissing-prototypes] drivers/block/drbd/drbd_nl.c:2753:5: warning: no previous prototype for ‘nla_put_status_info’ [-Wmissing-prototypes] drivers/block/drbd/drbd_nl.c:2895:5: warning: no previous prototype for ‘get_one_status’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
Rashika Kheria authored
Mark functions _drbd_send_uuids(), fill_bitmap_rle_bits() and init_submitter() as static in drbd/drbd_main.c because they are not used outside this file. This eliminates the following warnings in drbd/drbd_main.c: drivers/block/drbd/drbd_main.c:826:5: warning: no previous prototype for ‘_drbd_send_uuids’ [-Wmissing-prototypes] drivers/block/drbd/drbd_main.c:1070:5: warning: no previous prototype for ‘fill_bitmap_rle_bits’ [-Wmissing-prototypes] drivers/block/drbd/drbd_main.c:2592:5: warning: no previous prototype for ‘init_submitter’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
-
- 16 Feb, 2014 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "We have a small collection of fixes in my for-linus branch. The big thing that stands out is a revert of a new ioctl. Users haven't shipped yet in btrfs-progs, and Dave Sterba found a better way to export the information" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: use right clone root offset for compressed extents btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105 Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol Btrfs: fix max_inline mount option Btrfs: fix a lockdep warning when cleaning up aborted transaction Revert "btrfs: add ioctl to export size of global metadata reservation"
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: "Fix booting on PPC boards. Changes to of_match_node matching caused the serial port on some PPC boards to stop working. Reverted the change and reimplement to split matching between new style compatible only matching and fallback to old matching algorithm" * tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: search the best compatible match first in __of_match_node() Revert "OF: base: match each node compatible against all given matches first"
-
Kevin Hao authored
Currently, of_match_node compares each given match against all node's compatible strings with of_device_is_compatible. To achieve multiple compatible strings per node with ordering from specific to generic, this requires given matches to be ordered from specific to generic. For most of the drivers this is not true and also an alphabetical ordering is more sane there. Therefore, this patch introduces a function to match each of the node's compatible strings against all given compatible matches without type and name first, before checking the next compatible string. This implies that node's compatibles are ordered from specific to generic while given matches can be in any order. If we fail to find such a match entry, then fall-back to the old method in order to keep compatibility. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Stephen Chivers <schivers@csc.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor fixes this time to v3.14-rc1 related changes. Also included is one fix for a free after use regression in persistent reservations UNREGISTER logic that is CC'ed to >= v3.11.y stable" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: Target/sbc: Fix protection copy routine IB/srpt: replace strict_strtoul() with kstrtoul() target: Simplify command completion by removing CMD_T_FAILED flag iser-target: Fix leak on failure in isert_conn_create_fastreg_pool iscsi-target: Fix SNACK Type 1 + BegRun=0 handling target: Fix missing length check in spc_emulate_evpd_83() qla2xxx: Remove last vestiges of qla_tgt_cmd.cmd_list target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_div target: Fix free-after-use regression in PR unregister
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "i2c has a bugfix and documentation improvements for you" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Documentation: i2c: mention ACPI method for instantiating devices Documentation: i2c: describe devicetree method for instantiating devices i2c: mv64xxx: refactor message start to ensure proper initialization
-
Linus Torvalds authored
Merge branches 'irq-urgent-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "Fix from the urgent branch: a trivial oneliner adding the missing Kconfig dependency curing build failures which have been discovered by several build robots. The update in the irq-core branch provides a new function in the irq/devres code, which is a prerequisite for driver developers to get rid of boilerplate code all over the place. Not a bugfix, but it has zero impact on the current kernel due to the lack of users. It's simpler to provide the infrastructure to interested parties via your tree than fulfilling the wishlist of driver maintainers on which particular commit or tag this should be based on" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Add devm_request_any_context_irq()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "The following trilogy of patches brings you: - fix for a long standing math overflow issue with HZ < 60 - an onliner fix for a corner case in the dreaded tick broadcast mechanism affecting a certain range of AMD machines which are infested with the infamous automagic C1E power control misfeature - a fix for one of the ARM platforms which allows the kernel to proceed and boot instead of stupidly panicing for no good reason. The patch is slightly larger than necessary, but it's less ugly than the alternative 5 liner" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Clear broadcast pending bit when switching to oneshot clocksource: Kona: Print warning rather than panic time: Fix overflow when HZ is smaller than 60
-
- 15 Feb, 2014 13 commits
-
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull twi tracing fixes from Steven Rostedt: "Two urgent fixes in the tracing utility. The first is a fix for the way the ring buffer stores timestamps. After a restructure of the code was done, the ring buffer timestamp logic missed the fact that the first event on a sub buffer is to have a zero delta, as the full timestamp is stored on the sub buffer itself. But because the delta was not cleared to zero, the timestamp for that event will be calculated as the real timestamp + the delta from the last timestamp. This can skew the timestamps of the events and have them say they happened when they didn't really happen. That's bad. The second fix is for modifying the function graph caller site. When the stop machine was removed from updating the function tracing code, it missed updating the function graph call site location. It is still modified as if it is being done via stop machine. But it's not. This can lead to a GPF and kernel crash if the function graph call site happens to lie between cache lines and one CPU is executing it while another CPU is doing the update. It would be a very hard condition to hit, but the result is severe enough to have it fixed ASAP" * tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/x86: Use breakpoints for converting function graph caller ring-buffer: Fix first commit on sub-buffer having non-zero delta
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 EFI fixes from Peter Anvin: "A few more EFI-related fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Check status field to validate BGRT header x86/efi: Fix 32-bit fallout
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Kevin Hilman: "A collection of ARM SoC fixes for v3.14-rc1. Mostly a collection of Kconfig, device tree data and compilation fixes along with fix to drivers/phy that fixes a boot regression on some Marvell mvebu platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: dma: mv_xor: Silence a bunch of LPAE-related warnings ARM: ux500: disable msp2 device tree node ARM: zynq: Reserve not DMAable space in front of the kernel ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX ARM: imx6: Initialize low-power mode early again ARM: pxa: fix various compilation problems ARM: pxa: fix compilation problem on AM300EPD board ARM: at91: add Atmel's SAMA5D3 Xplained board spi/atmel: document clock properties mmc: atmel-mci: document clock properties ARM: at91: enable USB host on at91sam9n12ek board ARM: at91/dt: fix sama5d3 ohci hclk clock reference ARM: at91/dt: sam9263: fix compatibility string for the I2C ata: sata_mv: Fix probe failures with optional phys drivers: phy: Add support for optional phys drivers: phy: Make NULL a valid phy reference ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile ARM: moxart: move DMA_OF selection to driver ARM: hisi: fix kconfig warning on HAVE_ARM_TWD
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Guenter Roeck <linux@roeck-us.net>
-
Wolfram Sang authored
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Filipe David Borba Manana authored
For non compressed extents, iterate_extent_inodes() gives us offsets that take into account the data offset from the file extent items, while for compressed extents it doesn't. Therefore we have to adjust them before placing them in a send clone instruction. Not doing this adjustment leads to the receiving end requesting for a wrong a file range to the clone ioctl, which results in different file content from the one in the original send root. Issue reproducible with the following excerpt from the test I made for xfstests: _scratch_mkfs _scratch_mount "-o compress-force=lzo" $XFS_IO_PROG -f -c "truncate 118811" $SCRATCH_MNT/foo $XFS_IO_PROG -c "pwrite -S 0x0d -b 39987 92267 39987" $SCRATCH_MNT/foo $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap1 $XFS_IO_PROG -c "pwrite -S 0x3e -b 80000 200000 80000" $SCRATCH_MNT/foo $BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT $XFS_IO_PROG -c "pwrite -S 0xdc -b 10000 250000 10000" $SCRATCH_MNT/foo $XFS_IO_PROG -c "pwrite -S 0xff -b 10000 300000 10000" $SCRATCH_MNT/foo # will be used for incremental send to be able to issue clone operations $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/clones_snap $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT $SCRATCH_MNT/mysnap2 $FSSUM_PROG -A -f -w $tmp/1.fssum $SCRATCH_MNT/mysnap1 $FSSUM_PROG -A -f -w $tmp/2.fssum -x $SCRATCH_MNT/mysnap2/mysnap1 \ -x $SCRATCH_MNT/mysnap2/clones_snap $SCRATCH_MNT/mysnap2 $FSSUM_PROG -A -f -w $tmp/clones.fssum $SCRATCH_MNT/clones_snap \ -x $SCRATCH_MNT/clones_snap/mysnap1 -x $SCRATCH_MNT/clones_snap/mysnap2 $BTRFS_UTIL_PROG send $SCRATCH_MNT/mysnap1 -f $tmp/1.snap $BTRFS_UTIL_PROG send $SCRATCH_MNT/clones_snap -f $tmp/clones.snap $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/mysnap1 \ -c $SCRATCH_MNT/clones_snap $SCRATCH_MNT/mysnap2 -f $tmp/2.snap _scratch_unmount _scratch_mkfs _scratch_mount $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/1.snap $FSSUM_PROG -r $tmp/1.fssum $SCRATCH_MNT/mysnap1 2>> $seqres.full $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/clones.snap $FSSUM_PROG -r $tmp/clones.fssum $SCRATCH_MNT/clones_snap 2>> $seqres.full $BTRFS_UTIL_PROG receive $SCRATCH_MNT -f $tmp/2.snap $FSSUM_PROG -r $tmp/2.fssum $SCRATCH_MNT/mysnap2 2>> $seqres.full Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Chris Mason <clm@fb.com>
-
Anand Jain authored
bdev is null when disk has disappeared and mounted with the degrade option stack trace --------- btrfs_sysfs_add_one+0x105/0x1c0 [btrfs] open_ctree+0x15f3/0x1fe0 [btrfs] btrfs_mount+0x5db/0x790 [btrfs] ? alloc_pages_current+0xa4/0x160 mount_fs+0x34/0x1b0 vfs_kern_mount+0x62/0xf0 do_mount+0x22e/0xa80 ? __get_free_pages+0x9/0x40 ? copy_mount_options+0x31/0x170 SyS_mount+0x7e/0xc0 system_call_fastpath+0x16/0x1b --------- reproducer: ------- mkfs.btrfs -draid1 -mraid1 /dev/sdc /dev/sdd (detach a disk) devmgt detach /dev/sdc [1] mount -o degrade /dev/sdd /btrfs ------- [1] github.com/anajain/devmgt.git Signed-off-by: Anand Jain <Anand.Jain@oracle.com> Tested-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
-
Wolfram Sang authored
Because the offload mechanism can fall back to a standard transfer, having two seperate initialization states is unfortunate. Let's just have one state which does things consistently. This fixes a bug where some preparation was missing when the fallback happened. And it makes the code much easier to follow. To implement this, we put the check if offload is possible at the top of the offload setup function. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: stable@vger.kernel.org # v3.12+ Fixes: 930ab3d4 (i2c: mv64xxx: Add I2C Transaction Generator support)
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here is a bunch of USB fixes for 3.14-rc3. Most of these are xhci reverts, fixing a bunch of reported issues with USB 3 host controller issues that loads of people have been hitting (with the exception of kernel developers, all of our machines seem to be working fine, which is why these took so long to get resolved...) There are some other minor fixes and new device ids, as ususal. All have been in linux-next successfully" * tag 'usb-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: option: blacklist ZTE MF667 net interface Revert "usb: xhci: Link TRB must not occur within a USB payload burst" Revert "xhci: Avoid infinite loop when sg urb requires too many trbs" Revert "xhci: Set scatter-gather limit to avoid failed block writes." xhci 1.0: Limit arbitrarily-aligned scatter gather. Modpost: fixed USB alias generation for ranges including 0x9 and 0xA usb: core: Fix potential memory leak adding dyn USBdevice IDs USB: ftdi_sio: add Tagsys RFID Reader IDs usb: qcserial: add Netgear Aircard 340U usb-storage: enable multi-LUN scanning when needed USB: simple: add Dynastream ANT USB-m Stick device support usb-storage: add unusual-devs entry for BlackBerry 9000 usb-storage: restrict bcdDevice range for Super Top in Cypress ATACB usb: phy: move some error messages to debug usb: ftdi_sio: add Mindstorms EV3 console adapter usb: dwc2: fix memory corruption in dwc2 driver usb: dwc2: fix role switch breakage usb: dwc2: bail out early when booting with "nousb" Revert "xhci: replace xhci_read_64() with readq()" Revert "xhci: replace xhci_write_64() with writeq()" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver fixes from Greg KH: "Here are a small number of tty/serial driver fixes to resolve reported issues with 3.14-rc and earlier (in the case of the vt bugfix). Some of these have been tested and reported by a number of people as the tty bugfix was pretty commonly hit on some platforms. All have been in linux-next for a while" * tag 'tty-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: vt: Fix secure clear screen serial: 8250: Support XR17V35x fraction divisor n_tty: Fix stale echo output serial: sirf: fix kernel panic caused by unpaired spinlock serial: 8250_pci: unbreak last serial ports on NetMos 9865 cards n_tty: Fix poll() when TIME_CHAR and MIN_CHAR == 0 serial: omap: fix rs485 probe on defered pinctrl serial: 8250_dw: fix compilation warning when !CONFIG_PM_SLEEP serial: omap-serial: Move info message to probe function tty: Set correct tty name in 'active' sysfs attribute tty: n_gsm: Fix for modems with brk in modem status control drivers/tty/hvc: don't use module_init in non-modular hyp. console code
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are a number (lots, I know) of fixes for staging drivers to resolve a bunch of reported issues. The largest patches here is one revert of a patch that is in 3.14-rc1 to fix reported problems, and a sync of a usb host driver that required some ARM patches to go in before it could be accepted (which is why it missed -rc1) All of these have been in linux-next for a while with no reported issues" * tag 'staging-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (56 commits) staging/rtl8821ae: fix build, depends on MAC80211 iio: max1363: Use devm_regulator_get_optional for optional regulator iio:accel:bma180: Use modifier instead of index in channel specification iio: adis16400: Set timestamp as the last element in chan_spec iio: ak8975: Fix calculation formula for convert micro tesla to gauss unit staging:iio:ad799x fix typo in ad799x_events[] iio: mxs-lradc: remove useless scale_available files iio: mxs-lradc: fix buffer overflow iio:magnetometer:mag3110: Fix output of decimal digits in show_int_plus_micros() iio:magnetometer:mag3110: Report busy in _read_raw() / write_raw() when buffer is enabled wlags49_h2: Fix overflow in wireless_set_essid() xlr_net: Fix missing trivial allocation check staging: r8188eu: overflow in rtw_p2p_get_go_device_address() staging: r8188eu: array overflow in rtw_mp_ioctl_hdl() staging: r8188eu: Fix typo in USB_DEVICE list usbip/userspace/libsrc/names.c: memory leak gpu: ion: dereferencing an ERR_PTR staging: comedi: usbduxsigma: fix unaligned dereferences staging: comedi: fix too early cleanup in comedi_auto_config() staging: android: ion: dummy: fix an error code ...
-
Linus Torvalds authored
Merge tag 'driver-core-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core patch for 3.14-rc3 for the component code that Russell has found and fixed" * tag 'driver-core-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base: fix devres handling for master device
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes, along with some documentation updates, for 3.14-rc3. Nothing major, just a number of fixes for reported issues" * tag 'char-misc-3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Revert "misc: eeprom: sunxi: Add new compatibles" Revert "ARM: sunxi: dt: Convert to the new SID compatibles" misc: mic: fix possible signed underflow (undefined behavior) in userspace API ARM: sunxi: dt: Convert to the new SID compatibles misc: eeprom: sunxi: Add new compatibles misc: genwqe: Fix potential memory leak when pinning memory Documentation:Update Documentation/zh_CN/arm64/memory.txt Documentation:Update Documentation/zh_CN/arm64/booting.txt Documentation:Chinese translation of Documentation/arm64/tagged-pointers.txt raw: set range for MAX_RAW_DEVS raw: test against runtime value of max_raw_minors Drivers: hv: vmbus: Don't timeout during the initial connection with host Drivers: hv: vmbus: Specify the target CPU that should receive notification VME: Correct read/write alignment algorithm mei: don't unset read cb ptr on reset mei: clear write cb from waiting list on reset
-