- 20 May, 2016 35 commits
-
-
Rafal Redzimski authored
Current implementation updates the mtu size and notify cdc_ncm device using USB_CDC_SET_MAX_DATAGRAM_SIZE request about datagram size change instead of changing rx_urb_size. Whenever mtu is being changed, datagram size should also be updated. Also updating maxmtu formula so it takes max_datagram_size with use of cdc_ncm_max_dgram_size() and not ctx. Signed-off-by:
Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by:
Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We used to check dev->reg_state against NETREG_REGISTERED after each time we are woke up. But after commit 9e641bdc ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency"), it uses skb_recv_datagram() which does not check dev->reg_state. This will result if we delete a tun/tap device after a process is blocked in the reading. The device will wait for the reference count which was held by that process for ever. Fixes this by using RCV_SHUTDOWN which will be checked during sk_recv_datagram() before trying to wake up the process during uninit. Fixes: 9e641bdc ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") Cc: Eric Dumazet <edumazet@google.com> Cc: Xi Wang <xii@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
David S. Miller authored
Alexander Duyck says: ==================== Follow-ups for GUEoIPv6 patches This patch series is meant to be applied after: [PATCH v7 net-next 00/16] ipv6: Enable GUEoIPv6 and more fixes for v6 tunneling The first patch addresses an issue we already resolved in the GREv4 and is now present in GREv6 with the introduction of FOU/GUE for IPv6 based GRE tunnels. The second patch goes through and enables IPv6 tunnel offloads for the Intel NICs that already support the IPv4 based IP-in-IP tunnel offloads. I have only done a bit of touch testing but have seen ~20 Gb/s over an i40e interface using a v4-in-v6 tunnel, and I have verified IPv6 GRE is still passing traffic at around the same rate. I plan to do further testing but with these patches present it should enable a wider audience to be able to test the new features introduced in Tom's patchset with hardware offloads. ==================== Signed-off-by: -
Alexander Duyck authored
This patch adds support for offloading IPXIP6 type packets that represent either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In addition with this change we should also be able to support FOU encapsulated traffic with outer IPv6 headers. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Alexander Duyck authored
This patch addresses the same issue we had for IPv4 where enabling GRE with an inner checksum cannot be supported with FOU/GUE due to the fact that they will jump past the GRE header at it is treated like a tunnel header. Signed-off-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== RDS: TCP: connection spamming fixes We have been testing the RDS-TCP code with a connection spammer that sends incoming SYNs to the RDS listen port well after an rds-tcp connection has been established, and found a few race-windows that are fixed by this patch series. Patch 1 avoids a null pointer deref when an incoming SYN shows up when a netns is being dismantled, or when the rds-tcp module is being unloaded. Patch 2 addresses the case when a SYN is received after the connection arbitration algorithm has converged: the incoming SYN should not needlessly quiesce the transmit path, and it should not result in needless TCP connection resets due to re-execution of the connection arbitration logic. ==================== Signed-off-by: -
Sowmini Varadhan authored
When a rogue SYN is received after the connection arbitration algorithm has converged, the incoming SYN should not needlessly quiesce the transmit path, and it should not result in needless TCP connection resets due to re-execution of the connection arbitration logic. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
There are two instances where we want to terminate RDS-TCP: when exiting the netns or during module unload. In either case, the termination sequence is to stop the listen socket, mark the rtn->rds_tcp_listen_sock as null, and flush any accept workqs. Thus any workqs that get flushed at this point will encounter a null rds_tcp_listen_sock, and must exit gracefully to allow the RDS-TCP termination to complete successfully. Signed-off-by:
-
Andrey Ryabinin authored
->sk_shutdown bits share one bitfield with some other bits in sock struct, such as ->sk_no_check_[r,t]x, ->sk_userlocks ... sock_setsockopt() may write to these bits, while holding the socket lock. In case of AF_UNIX sockets, we change ->sk_shutdown bits while holding only unix_state_lock(). So concurrent setsockopt() and shutdown() may lead to corrupting these bits. Fix this by moving ->sk_shutdown bits out of bitfield into a separate byte. This will not change the 'struct sock' size since ->sk_shutdown moved into previously unused 16-bit hole. Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Suggested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
David S. Miller authored
Tom Herbert says: ==================== ipv6: Enable GUEoIPv6 and more fixes for v6 tunneling This patch set: - Fixes GRE6 to process translate flags correctly from configuration - Adds support for GSO and GRO for ip6ip6 and ip4ip6 - Add support for FOU and GUE in IPv6 - Support GRE, ip6ip6 and ip4ip6 over FOU/GUE - Fixes ip6_input to deal with UDP encapsulations - Some other minor fixes v2: - Removed a check of GSO types in MPLS - Define GSO type SKB_GSO_IPXIP6 and SKB_GSO_IPXIP4 (based on input from Alexander) - Don't define GSO types specifically for IP6IP6 and IP4IP6, above fix makes that unnecessary - Don't bother clearing encapsulation flag in UDP tunnel segment (another item suggested by Alexander). v3: - Address some minor comments from Alexander v4: - Rebase on changes to fix IP TX tunnels - Fix MTU issues in ip4ip6, ip6ip6 - Add test data for above v5: - Address feedback from Shmulik Ladkani regarding extension header code that does not return next header but in instead relies on returning value via nhoff. Solution here is to fix EH processing to return nexthdr value. - Refactored IPv4 encaps so that we won't need to create a ip6_tunnel_core.c when adding encap support IPv6. v6: - Fix build issues with regard to new GSO constants - FIx MTU calculation issues ip6_tunnel.c pointed out byt ALex - Add encap_hlen into headroom for GREv6 to work with FOU/GUE v7: - Added skb_set_inner_ipproto to ip4ip6 and ip6ip6 - Clarified max_headroom in ip6_tnl_xmit - Set features for IPv6 tunnels - Other cleanup suggested by Alexander - Above fixes throughput performance issues in ip4ip6 and ip6ip6, updated test results to reflect that Tested: Various cases of IP tunnels with netperf TCP_STREAM and TCP_RR. - IPv4/GRE/GUE/IPv6 with RCO 1 TCP_STREAM 6616 Mbps 200 TCP_RR 1244043 tps 141/243/446 90/95/99% latencies 86.61% CPU utilization - IPv6/GRE/GUE/IPv6 with RCO 1 TCP_STREAM 6940 Mbps 200 TCP_RR 1270903 tps 138/236/440 90/95/99% latencies 87.51% CPU utilization - IP6IP6 1 TCP_STREAM 5307 Mbps 200 TCP_RR 498981 tps 388/498/631 90/95/99% latencies 19.75% CPU utilization (1 CPU saturated) - IP6IP6/GUE with RCO 1 TCP_STREAM 5575 Mbps 200 TCP_RR 1233818 tps 143/244/451 90/95/99% latencies 87.57 CPU utilization - IP4IP6 1 TCP_STREAM 5235 Mbps 200 TCP_RR 763774 tps 250/318/466 90/95/99% latencies 35.25% CPU utilization (1 CPU saturated) - IP4IP6/GUE with RCO 1 TCP_STREAM 5337 Mbps 200 TCP_RR 1196385 tps 148/251/460 90/95/99% latencies 87.56 CPU utilization - GRE with keyid 200 TCP_RR 744173 tps 258/332/461 90/95/99% latencies 34.59% CPU utilization (1 CPU saturated) ==================== Signed-off-by: -
Tom Herbert authored
Since iptunnel_handle_offloads() is called in all paths we can probably drop the block in ip6_tnl_xmit that was checking for skb->encapsulation and resetting the inner headers. Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Tom Herbert authored
Signed-off-by:
-
Tom Herbert authored
Signed-off-by:
-
Tom Herbert authored
Need to set dev features, use same values that are used in GREv6. Signed-off-by:
-
Tom Herbert authored
Add netlink and setup for encapsulation Signed-off-by:
-
Tom Herbert authored
Add netlink and setup for encapsulation Signed-off-by:
-
Tom Herbert authored
This patch add a new fou6 module that provides encapsulation operations for IPv6. Signed-off-by:
-
Tom Herbert authored
Add encap_hlen and ip_tunnel_encap structure to ip6_tnl. Add functions for getting encap hlen, setting up encap on a tunnel, performing encapsulation operation. Signed-off-by:
-
Tom Herbert authored
This patch adds receive path support for IPv6 with fou. - Add address family to fou structure for open sockets. This supports AF_INET and AF_INET6. Lookups for fou ports are performed on both the port number and family. - In fou and gue receive adjust tot_len in IPv4 header or payload_len based on address family. - Allow AF_INET6 in FOU_ATTR_AF netlink attribute. Signed-off-by:
-
Tom Herbert authored
Create __fou_build_header and __gue_build_header. These implement the protocol generic parts of building the fou and gue header. fou_build_header and gue_build_header implement the IPv4 specific functions and call the __*_build_header functions. Signed-off-by:
-
Tom Herbert authored
Use helper function to set up UDP tunnel related information for a fou socket. Signed-off-by:
-
Tom Herbert authored
Consolidate all the ip_tunnel_encap definitions in one spot in the header file. Also, move ip_encap_hlen and ip_tunnel_encap from ip_tunnel.c to ip_tunnels.h so they call be called without a dependency on ip_tunnel module. Similarly, move iptun_encaps to ip_tunnel_core.c. Signed-off-by:
-
Tom Herbert authored
When performing foo-over-UDP, UDP packets are processed by the encapsulation handler which returns another protocol to process. This may result in processing two (or more) protocols in the loop that are marked as INET6_PROTO_FINAL. The actions taken for hitting a final protocol, in particular the skb_postpull_rcsum can only be performed once. This patch set adds a check of a final protocol has been seen. The rules are: - If the final protocol has not been seen any protocol is processed (final and non-final). In the case of a final protocol, the final actions are taken (like the skb_postpull_rcsum) - If a final protocol has been seen (e.g. an encapsulating UDP header) then no further non-final protocols are allowed (e.g. extension headers). For more final protocols the final actions are not taken (e.g. skb_postpull_rcsum). Signed-off-by: -
Tom Herbert authored
In ip6_input_finish the nexthdr protocol is retrieved from the next header offset that is returned in the cb of the skb. This method does not work for UDP encapsulation that may not even have a concept of a nexthdr field (e.g. FOU). This patch checks for a final protocol (INET6_PROTO_FINAL) when a protocol handler returns > 0. If the protocol is not final then resubmission is performed on nhoff value. If the protocol is final then the nexthdr is taken to be the return value. Signed-off-by:
-
Tom Herbert authored
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Tom Herbert authored
In several gso_segment functions there are checks of gso_type against a seemingly arbitrary list of SKB_GSO_* flags. This seems like an attempt to identify unsupported GSO types, but since the stack is the one that set these GSO types in the first place this seems unnecessary to do. If a combination isn't valid in the first place that stack should not allow setting it. This is a code simplication especially for add new GSO types. Signed-off-by:
-
Fabio Estevam authored
Commit da47b457 ("phy: add support for a reset-gpio specification") causes the following xtensa qemu crash according to Guenter Roeck: [ 9.366256] libphy: ethoc-mdio: probed [ 9.367389] (null): could not attach to PHY [ 9.368555] (null): failed to probe MDIO bus [ 9.371540] Unable to handle kernel paging request at virtual address 0000001c [ 9.371540] pc = d0320926, ra = 903209d1 [ 9.375358] Oops: sig: 11 [#1] This reverts commit da47b457. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
-
Paul Durrant authored
A domain with a frontend that does not implement a control ring has been seen to cause a crash during domain save. This was apparently because the call to xenvif_deinit_hash() in xenvif_disconnect_ctrl() is made regardless of whether a control ring was connected, and hence xenvif_hash_init() was called. This patch brings the call to xenvif_deinit_hash() in xenvif_disconnect_ctrl() inside the if clause that checks whether the control ring event channel was connected. This is sufficient to ensure it is only called if xenvif_init_hash() was called previously. Signed-off-by:
Paul Durrant <paul.durrant@citrix.com> Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Tested-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_NET_CLS_ACT is disabled, we get a new warning in the mlx5 ethernet driver because the tc_for_each_action() loop never references the iterator: mellanox/mlx5/core/en_tc.c: In function 'mlx5e_stats_flower': mellanox/mlx5/core/en_tc.c:431:20: error: unused variable 'a' [-Werror=unused-variable] struct tc_action *a; This changes the dummy tc_for_each_action() macro by adding a cast to void, letting the compiler know that the variable is intentionally declared but not used here. I could not come up with a nicer workaround, but this seems to do the trick. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: aad7e08d ("net/mlx5e: Hardware offloaded flower filter statistics support") Fixes: 00175aec ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Acked-By:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Daniel Borkmann authored
Start address randomization and blinding in BPF currently use prandom_u32(). prandom_u32() values are not exposed to unpriviledged user space to my knowledge, but given other kernel facilities such as ASLR, stack canaries, etc make use of stronger get_random_int(), we better make use of it here as well given blinding requests successively new random values. get_random_int() has minimal entropy pool depletion, is not cryptographically secure, but doesn't need to be for our use cases here. Suggested-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Manish Chopra authored
Driver incorrectly uses dma_unmap_addr_set() to set a variable which is in truth a dma_addr_t [i.e not defined using DEFINE_DMA_UNMAP_ADDR()] and is being used by the driver flows other than unmapping physical addresses. This patch fixes driver fastpath where CONFIG_NEED_DMA_MAP_STATE is not set. Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Sabrina Dubroca authored
In my last commit I replaced MACSEC_SA_ATTR_KEYID by MACSEC_SA_ATTR_KEY. Fixes: 8acca6ac ("macsec: key identifier is 128 bits, not 64") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Paul Durrant authored
The length checks on the grant table copy_ops for setting hash key and hash mapping are checking the local 'len' value which is correct in the case of the former but not the latter. This was picked up by static analysis checks. This patch replaces checks of 'len' with 'copy_op.len' in both cases to correct the incorrect check, keep the two checks consistent, and to make it clear what the checks are for. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by:
-
Rabin Vincent authored
Since e7f4dc35 ("mdio: Move allocation of interrupts into core"), platforms which call fixed_phy_add() before fixed_mdio_bus_init() is called (for example, because the platform code and the fixed_phy driver use the same initcall level) crash in fixed_phy_add() since the ->mii_bus is not allocated. Also since e7f4dc35, these interrupts are initalized to polling by default. The few (old) platforms which directly use fixed_phy_add() from their platform code all pass PHY_POLL for the irq argument, so we can keep these platforms not crashing by simply not attempting to set the irq if PHY_POLL is passed. Also, even if problems have not been reported on more modern platforms which used fixed_phy_register() from drivers' probe functions, we return -EPROBE_DEFER if the MDIO bus is not yet registered so that the probe is retried later. Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
This reverts commit e00be9e4. It causes warnings and has several problems. Signed-off-by:
-
- 19 May, 2016 5 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== During the Wireless Battle Mesh v9 in Porto (PT) at the beginning of May, we managed to uncover and fix some important bugs in our new B.A.T.M.A.N. V algorithm. These are the fixes we came up with together with others that I collected in the past weeks: - avoid potential crash due to NULL pointer dereference in B.A.T.M.A.N. V routine when a neigh_ifinfo object is not found, by Sven Eckelmann - avoid use-after-free of skb when counting outgoing bytes, by Florian Westphal - fix neigh_ifinfo object reference counting imbalance when using B.A.T.M.A.N. V, by Sven Eckelmann. Such imbalance may lead to the impossibility of releasing the related netdev object on shutdown - avoid invalid memory access in case of error while allocating bcast_own_sum when a new hard-interface is added, by Sven Eckelmann - ensure originator address is updated in OMG/ELP packet content upon primary interface address change, by Antonio Quartulli - fix integer overflow when computing TQ metric (B.A.T.M.A.N. IV), by Sven Eckelmann - avoid race condition while adding new neigh_node which would result in having two objects mapping to the same physical neighbour, by Linus Lüssing - ensure originator address is initialized in ELP packet content on secondary interfaces, by Marek Lindner ==================== Signed-off-by: -
Amit Ghadge authored
This is a patch to clean checkpatch warnings and errors in the Space.c file. Clean up the following warnings and errors. WARNING : * Block comments use * on subsequent lines * Missing a blank line after declarations * networking block comments don't use an empty /* line, use /* * please, no space before tabs * please, no spaces at the start of a line * line over 80 characters ERROR : * code indent should use tabs where possible * space prohibited after that open parenthesis '(' Signed-off-by:Amit Ghadge <amitg.b14@gmail.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: block BH in TCP callbacks Four layers using TCP stack were assuming sk_callback_lock could be locked using read_lock() in their handlers because TCP stack was running with BH disabled. This is no longer the case. Since presumably the rest could also depend on BH being disabled, just use read_lock_bh(). Then each layer might consider switching to RCU protection and no longer depend on BH. ==================== Signed-off-by: -
Eric Dumazet authored
TCP stack can now run from process context. Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous assumption. Fixes: 5413d1ba ("net: do not block BH while processing socket backlog") Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by:
-
Eric Dumazet authored
TCP stack can now run from process context. Use read_lock_bh(&sk->sk_callback_lock) variant to restore previous assumption. Fixes: 5413d1ba ("net: do not block BH while processing socket backlog") Fixes: d41a69f1 ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by:
-
