1. 02 Sep, 2020 5 commits
  2. 01 Sep, 2020 4 commits
  3. 31 Aug, 2020 6 commits
    • Grygorii Strashko's avatar
      net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode · c2f89219
      Grygorii Strashko authored
      In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL
      register to enable support for 100Mbit link speed.
      
      Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
      Signed-off-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c2f89219
    • Potnuri Bharat Teja's avatar
      cxgb4: fix thermal zone device registration · 6b6382a8
      Potnuri Bharat Teja authored
      When multiple adapters are present in the system, pci hot-removing second
      adapter leads to the following warning as both the adapters registered
      thermal zone device with same thermal zone name/type.
      Therefore, use unique thermal zone name during thermal zone device
      initialization. Also mark thermal zone dev NULL once unregistered.
      
      [  414.370143] ------------[ cut here ]------------
      [  414.370944] sysfs group 'power' not found for kobject 'hwmon0'
      [  414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281
       sysfs_remove_group+0x76/0x80
      [  414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ #33
      [  414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016
      [  414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80
      [  414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff
       eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d
       41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54
      [  414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286
      [  414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
      [  414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510
      [  414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000
      [  414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008
      [  414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020
      [  414.395661] FS:  00007fd2a7171740(0000) GS:ffff8ee2de200000(0000)
       knlGS:0000000000000000
      [  414.396825] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0
      [  414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      [  414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      [  414.401473] Call Trace:
      [  414.402685]  device_del+0x89/0x400
      [  414.403819]  device_unregister+0x16/0x60
      [  414.405024]  hwmon_device_unregister+0x44/0xa0
      [  414.406112]  thermal_remove_hwmon_sysfs+0x196/0x200
      [  414.407256]  thermal_zone_device_unregister+0x1b5/0x1f0
      [  414.408415]  cxgb4_thermal_remove+0x3c/0x4f [cxgb4]
      [  414.409668]  remove_one+0x212/0x290 [cxgb4]
      [  414.410875]  pci_device_remove+0x36/0xb0
      [  414.412004]  device_release_driver_internal+0xe2/0x1c0
      [  414.413276]  pci_stop_bus_device+0x64/0x90
      [  414.414433]  pci_stop_and_remove_bus_device_locked+0x16/0x30
      [  414.415609]  remove_store+0x75/0x90
      [  414.416790]  kernfs_fop_write+0x114/0x1b0
      [  414.417930]  vfs_write+0xcf/0x210
      [  414.419059]  ksys_write+0xa7/0xe0
      [  414.420120]  do_syscall_64+0x4c/0xa0
      [  414.421278]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
      [  414.422335] RIP: 0033:0x7fd2a686afd0
      [  414.423396] Code: Bad RIP value.
      [  414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX:
       0000000000000001
      [  414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0
      [  414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001
      [  414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740
      [  414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400
      [  414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
      [  414.431027] irq event stamp: 76300
      [  414.435678] ---[ end trace 13865acb4d5ab00f ]---
      
      Fixes: b1871915 ("cxgb4: Add thermal zone support")
      Signed-off-by: default avatarPotnuri Bharat Teja <bharat@chelsio.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6b6382a8
    • Xie He's avatar
      drivers/net/wan/hdlc_cisco: Add hard_header_len · 1a545ebe
      Xie He authored
      This driver didn't set hard_header_len. This patch sets hard_header_len
      for it according to its header_ops->create function.
      
      This driver's header_ops->create function (cisco_hard_header) creates
      a header of (struct hdlc_header), so hard_header_len should be set to
      sizeof(struct hdlc_header).
      
      Cc: Martin Schiller <ms@dev.tdt.de>
      Signed-off-by: default avatarXie He <xie.he.0141@gmail.com>
      Acked-by: default avatarKrzysztof Halasa <khc@pm.waw.pl>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a545ebe
    • Shannon Nelson's avatar
      ionic: fix txrx work accounting · 9dda5110
      Shannon Nelson authored
      Take the tx accounting out of the work_done calculation to
      prevent a possible duplicate napi_schedule call when under
      high Tx stress but low Rx traffic.
      
      Fixes: b14e4e95 ("ionic: tx separate servicing")
      Signed-off-by: default avatarShannon Nelson <snelson@pensando.io>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9dda5110
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · e9d572d9
      David S. Miller authored
      Pablo Neira Ayuso says:
      
      ====================
      Netfilter fixes for net
      
      The following patchset contains Netfilter fixes for net:
      
      1) Do not delete clash entries on reply, let them expire instead,
         from Florian Westphal.
      
      2) Do not report EAGAIN to nfnetlink, otherwise this enters a busy loop.
         Update nfnetlink_unicast() to translate EAGAIN to ENOBUFS.
      
      3) Remove repeated words in code comments, from Randy Dunlap.
      
      4) Several patches for the flowtable selftests, from Fabian Frederick.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9d572d9
    • Tuong Lien's avatar
      tipc: fix using smp_processor_id() in preemptible · bb8872a1
      Tuong Lien authored
      The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current
      CPU for encryption, however the execution can be preemptible since it's
      actually user-space context, so the 'using smp_processor_id() in
      preemptible' has been observed.
      
      We fix the issue by using the 'get/put_cpu_ptr()' API which consists of
      a 'preempt_disable()' instead.
      
      Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication")
      Acked-by: default avatarJon Maloy <jmaloy@redhat.com>
      Signed-off-by: default avatarTuong Lien <tuong.t.lien@dektech.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb8872a1
  4. 29 Aug, 2020 1 commit
    • Florian Westphal's avatar
      netfilter: conntrack: do not auto-delete clash entries on reply · c4617214
      Florian Westphal authored
      Its possible that we have more than one packet with the same ct tuple
      simultaneously, e.g. when an application emits n packets on same UDP
      socket from multiple threads.
      
      NAT rules might be applied to those packets. With the right set of rules,
      n packets will be mapped to m destinations, where at least two packets end
      up with the same destination.
      
      When this happens, the existing clash resolution may merge the skb that
      is processed after the first has been received with the identical tuple
      already in hash table.
      
      However, its possible that this identical tuple is a NAT_CLASH tuple.
      In that case the second skb will be sent, but no reply can be received
      since the reply that is processed first removes the NAT_CLASH tuple.
      
      Do not auto-delete, this gives a 1 second window for replies to be passed
      back to originator.
      
      Packets that are coming later (udp stream case) will not be affected:
      they match the original ct entry, not a NAT_CLASH one.
      
      Also prevent NAT_CLASH entries from getting offloaded.
      
      Fixes: 6a757c07 ("netfilter: conntrack: allow insertion of clashing entries")
      Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      c4617214
  5. 28 Aug, 2020 13 commits
  6. 27 Aug, 2020 11 commits