- 27 Mar, 2013 17 commits
-
-
Yaniv Rosner authored
Make few alignments, comment fixes and debug messages. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yaniv Rosner authored
Add full support for "ethtool -m" command. Signed-off-by:
-
Dmitry Kravkov authored
The mail box containing the Vf-Pf messages is susceptible to a race - it's possible for 2 flows to try and write commands, causing one to override the other's message. Use a mutex to synchronize the access, preventing said race. Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Ariel Elior authored
Outer vlan removal in VF queues was made according to the VF's multi-function mode (which is never set). Instead, the PF's multi-function mode should be used to determine if outer vlan removal is needed. Signed-off-by:
-
Ariel Elior authored
After a VF performs load/unload its statistics become corrupt - we now zero the statistics structures upon a VF device load. Signed-off-by:
-
Ariel Elior authored
If ARI forwarding flag is missing from the PCI bridge, remove SR-IOV support instead of failing the probe process. Signed-off-by:
-
Yuval Mintz authored
Commit 7fa6f34 "AER revised" erroneously inserted an error-flow in which a semaphore is released even though the attempt to take it has failed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Jason Wang authored
Switch to use the new help skb_probe_transport_header() to do the l4 header probing for untrusted sources. For packets with partial csum, the header should already been set by skb_partial_csum_set(). Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
Sometimes, we need probe and set the transport header for packets (e.g from untrusted source). This patch introduces a new helper skb_probe_transport_header() which tries to probe and set the l4 header through skb_flow_dissect(), if not just set the transport header to the hint passed by caller. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
For untrusted packets with partial checksum, we need to set the transport header for precise packet length estimation. We can just let skb_pratial_csum_set() to do this to avoid extra call to skb_flow_dissect() and simplify the caller. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sahara authored
This fixes a number of sparse warnings like: warning: incorrect type in argument 2 (different address spaces) expected void volatile [noderef] <asn:2>*addr got unsigned int *<noident> warning: Using plain integer as NULL pointer Additionally this fixes a warning from checkpatch.pl like: WARNING: sizeof pch_param.station should be sizeof(pch_param.station) Signed-off-by:Sahara <keun-o.park@windriver.com> Signed-off-by:
-
Tony Cheneau authored
Signed-off-by:
Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by:
-
Tony Cheneau authored
This formatting issue was introduced with commit d4ac3236Signed-off-by:
-
stefan@datenfreihafen.org authored
The register names have been wrong since the beginning but it only showed up now as they are actualy used for the upcoming auto ACK support. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
stefan@datenfreihafen.org authored
Implement the filter function to update short address, pan id and ieee address on change. Allowing for hardware address filtering needed for auto ACK. Signed-off-by:
-
Stephen Röttger authored
This patch lets dgram_recvmsg fill in the sockaddr struct in msg->msg_name with the source address of the packet. This is used by the userland functions recvmsg and recvfrom to get the senders address. [Stefan: Changed from old zigbee legacy tree to mainline] Signed-off-by:
Stephen Röttger <stephen.roettger@zero-entropy.de> Signed-off-by:
-
Pravin B Shelar authored
Fixes following warning:- drivers/net/vxlan.c:471:35: warning: symbol 'dev' shadows an earlier one drivers/net/vxlan.c:433:26: originally declared here drivers/net/vxlan.c:794:34: warning: symbol 'vxlan' shadows an earlier one drivers/net/vxlan.c:757:26: originally declared here CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
- 26 Mar, 2013 23 commits
-
-
Shahed Shaikh authored
Add myself to qlge maintainers list. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
-
Jim Baxter authored
The TX Buffer in fec_enet_alloc_buffers was being initialized with the receive register define BD_ENET_RX_INT instead of the transmit register define BD_ENET_TX_INT Signed-off-by:
Jim Baxter <jim_baxter@mentor.com> Signed-off-by:
-
David S. Miller authored
Giuseppe CAVALLARO says: ==================== These patches enhance the driver adding the PTP support and the initial code for RGMII/SGMII/TBI/RTBI modes. Also this patches review the driver removing some Koption for selecting between chain and ring modes. REally useful to validate the driver also at build time. Before adding PTP, the extended descriptor support has been added because it is mandatory to save HW timestamp in new dedicated descriptors. Also in this case no Koption added. Concerning the PTP, I have hacked/reviewed and tested many part of these patches also verifying the back compatibility on several HW and chips. Concerning the SGMII/RGMII we have already discussed about the support in the net.dev Mailing list with Byungho where these patchs were partially analysed. So I have only ported them against the latest net-next (and on top of PTP). I have added some missing things: e.g. some parts of the ethtool for ANE. As we clarified with Byungho, we will add further enhancements on top of these patches if needed. I have also built all against ARM/SH/X68 platforms and no issues on ST-Boxes. Thx goes to Rayagond that wrote and tested the PTP and to Byungho for SGMII. V2: This Version 2 has the fixes discussed in the ML, for example: o completely remove the Koption... all the decisions are made at probe time o review the PTP patches and better organize them just in two patches o added all the fixes provided by Richard on PTP and CLK driver. ==================== Signed-off-by: -
Giuseppe CAVALLARO authored
This patch updates the stmmac.txt file adding information related to the PTP and SGMII/RGMII supports. Also the patch updates the driver version to: March_2013. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Rayagond Kokatanur authored
This patch implements PHC (ptp hardware clock) driver for stmmac driver to support 1588 PTP. V2: added support for FINE method, reduced loop delay and review spinlock. Signed-off-by:
Rayagond Kokatanur <rayagond@vayavyalabs.com> Hacked-by:
-
Rayagond Kokatanur authored
This patch enhances the stmmac driver to support IEEE 1588-2002 PTP (Precision Time Protocol) version 1 and IEEE 1588-2008 PPT version 2. Precision Time Protocol(PTP),which enables precise synchronization of clocks in measurement and control systems implemented with technologies such as network communication,local computing, & distributed objects. Both PTPv1 and PTPv2 is selected at run-time using the HW capability register. The PTPv1 TimeStamp support can be used on chips that have the normal descriptor structures and PTPv2 TimeStamp support can be used on chips that have the Extended descriptors(DES4-5-6-7). All such sanity checks are done and verified by using HW capability register. V2: in this version the ethtool support has been included in this patch; Koptions have been completely removed (previously added to select PTP and PTPv2). PTPv1 and PTPv2 is now added in a single patch instead of two patches. get_timestamp() and get_systemtime() L/H have been combined into single APIs. Signed-off-by:
-
Rayagond Kokatanur authored
This patch adds a new pointer variable called "tx_skbuff_dma" to private data structure. This variable will holds the physical address of packet to be transmitted & same will be used to free/unmap the memory once the corresponding packet is transmitted by device. Prior to this patch the descriptor buffer pointer(ie des2) itself was being used for freeing/unmapping the buffer memory. But in case PTP v1 with normal descriptor the field(des2) will be overwritten by device with timestamp value, hence driver will loose the buffer pointer to be freed/unmapped. Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch adds the minimal support to manage the PCS modes (RGMII/SGMII) and restart the ANE. Both TBI and RTBI are not yet supported. Thanks to Byungho that wrote some part of this code and tested SGMII too. The only thing to be fixed is the get/set pause in ethtool. Signed-off-by:
Byungho An <bh74.an@samsung.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch starts adding in the main ISR the management of the PCS and RGMII/SGMII core interrupts. This is to help further development on this area. Currently the core irq handler only clears the PCS and S-R_MII interrupts and reports the event in the ethtool stats. Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch is to support the extend descriptors available in the chips newer than the 3.50. In case of the extend descriptors cannot be supported, at runtime, the driver will continue to work using the old style. In detail, this support extends the main descriptor structure adding new descriptors: 4, 5, 6, 7. The desc4 gives us extra information about the received ethernet payload when it is carrying PTP packets or TCP/UDP/ICMP over IP packets. The descriptors 6 and 7 are used for saving HW L/H timestamps (PTP). V2: this new version removes the Koption added in the first implementation because all the checks now to verify if the extended descriptors are actually supported happen at probe time. Signed-off-by:
-
Giuseppe CAVALLARO authored
Previously we had two Koptions to decide if the stmmac had to use either a ring or a chain to manage its descriptors. This patch removes the Kernel configuration options and it allow us to use the chain mode by passing a module option. Ring mode continues to be the default. Also with this patch, it will be easier to validate the driver built and guarantee that all the two modes always compile fine. Signed-off-by:
-
Veaceslav Falico authored
bond_resend_igmp_join_requests_delayed() calls _resend_igmp_join_requests() under rcu_read_lock(), while it gets its own rcu_read_lock() for the whole function. Remove the lock from the _delayed function. Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Jiri Benc authored
Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
Signed-off-by:
-
Jingoo Han authored
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/net/wireless/iwlegacy/common.c:4894:1: warning: 'il_pci_suspend' defined but not used [-Wunused-function] drivers/net/wireless/iwlegacy/common.c:4912:1: warning: 'il_pci_resume' defined but not used [-Wunused-function] Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jingoo Han authored
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/net/ethernet/atheros/atlx/atl1.c:2861:12: warning: 'atl1_resume' defined but not used [-Wunused-function] Signed-off-by:
-
Jingoo Han authored
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/net/ethernet/wiznet/w5100.c:758:12: warning: 'w5100_suspend' defined but not used [-Wunused-function] drivers/net/ethernet/wiznet/w5100.c:773:12: warning: 'w5100_resume' defined but not used [-Wunused-function] drivers/net/ethernet/wiznet/w5300.c:670:12: warning: 'w5300_suspend' defined but not used [-Wunused-function] drivers/net/ethernet/wiznet/w5300.c:685:12: warning: 'w5300_resume' defined but not used [-Wunused-function] Signed-off-by:
-
David S. Miller authored
Jason Wang says: ==================== We don't set transport header for untrusted packets in the past, but for the follwoing reasons, we need to do it now. - Better packet length estimation (introduced in 1def9238) needs l4 header for gso packets to compute the header length. - Some driver needs l4 header (e.g. ixgbe needs tcp header to do atr). So this patches tries to set transport header for packets from untrusted source (netback, packet, tuntap, macvtap). Plus a fix for better estimation on packet length for DODGY packet. Tested on tun/macvtap/packet, compile test on netback. ==================== Signed-off-by:
-
Jason Wang authored
gso_segs were reset to zero when kernel receive packets from untrusted source. But we use this zero value to estimate precise packet len which is wrong. So this patch tries to estimate the correct gso_segs value before using it in qdisc_pkt_len_init(). Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
Currently, for the packets receives from netback, before doing header check, kernel just reset the transport header in netif_receive_skb() which pretends non l4 header. This is suboptimal for precise packet length estimation (introduced in 1def9238: net_sched: more precise pkt_len computation) which needs correct l4 header for gso packets. The patch just reuse the header probed by netback for partial checksum packets and tries to use skb_flow_dissect() for other cases, if both fail, just pretend no l4 header. Cc: Eric Dumazet <edumazet@google.com> Cc: Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
Jason Wang authored
Set the transport header for 1) some drivers (e.g ixgbe needs l4 header to do atr) 2) precise packet length estimation (introduced in 1def9238) needs l4 header to compute header length. So this patch first tries to get l4 header for packet socket through skb_flow_dissect(), and pretend no l4 header if skb_flow_dissect() fails. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
Currently, for the packets receives from tuntap, before doing header check, kernel just reset the transport header in netif_receive_skb() which pretends no l4 header. This is suboptimal for precise packet length estimation (introduced in 1def9238) which needs correct l4 header for gso packets. So this patch set the transport header to csum_start for partial checksum packets, otherwise it first try skb_flow_dissect(), if it fails, just reset the transport header. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jason Wang authored
Set the transport header for 1) some drivers (e.g ixgbe) needs l4 header 2) precise packet length estimation (introduced in 1def9238) needs l4 header to compute header length. For the packets with partial checksum, the patch just set the transport header to csum_start. Otherwise tries to use skb_flow_dissect() to get l4 offset, if it fails, just pretend no l4 header. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
