An error occurred fetching the project authors.
- 08 Jan, 2018 6 commits
-
-
Christoph Hellwig authored
All callers are gone now. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Christoph Hellwig authored
Change the calling convention so that get_dev_pagemap always consumes the previous reference instead of doing this using an explicit earlier call to put_dev_pagemap in the callers. The callers will still need to put the final reference after finishing the loop over the pages. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
-
Christoph Hellwig authored
This is a pretty big function, which should be out of line in general, and a no-op stub if CONFIG_ZONE_DEVICЕ is not set. Signed-off-by:
-
Christoph Hellwig authored
Pass the vmem_altmap two levels down instead of needing a lookup. Signed-off-by:
-
Christoph Hellwig authored
We can just pass this on instead of having to do a radix tree lookup without proper locking 2 levels into the callchain. Signed-off-by:
-
Christoph Hellwig authored
We can just pass this on instead of having to do a radix tree lookup without proper locking 2 levels into the callchain. Signed-off-by:
-
- 04 Oct, 2017 1 commit
-
-
Michal Hocko authored
devm_memremap_pages is initializing struct pages in for_each_device_pfn and that can take quite some time. We have even seen a soft lockup triggering on a non preemptive kernel NMI watchdog: BUG: soft lockup - CPU#61 stuck for 22s! [kworker/u641:11:1808] [...] RIP: 0010:[<ffffffff8118b6b7>] [<ffffffff8118b6b7>] devm_memremap_pages+0x327/0x430 [...] Call Trace: pmem_attach_disk+0x2fd/0x3f0 [nd_pmem] nvdimm_bus_probe+0x64/0x110 [libnvdimm] driver_probe_device+0x1f7/0x420 bus_for_each_drv+0x52/0x80 __device_attach+0xb0/0x130 bus_probe_device+0x87/0xa0 device_add+0x3fc/0x5f0 nd_async_device_register+0xe/0x40 [libnvdimm] async_run_entry_fn+0x43/0x150 process_one_work+0x14e/0x410 worker_thread+0x116/0x490 kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 fix this by adding cond_resched every 1024 pages. Link: http://lkml.kernel.org/r/20170918121410.24466-4-mhocko@kernel.orgSigned-off-by:Michal Hocko <mhocko@suse.com> Reported-by:
Johannes Thumshirn <jthumshirn@suse.de> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Sep, 2017 4 commits
-
-
Jérôme Glisse authored
Platform with advance system bus (like CAPI or CCIX) allow device memory to be accessible from CPU in a cache coherent fashion. Add a new type of ZONE_DEVICE to represent such memory. The use case are the same as for the un-addressable device memory but without all the corners cases. Link: http://lkml.kernel.org/r/20170817000548.32038-19-jglisse@redhat.comSigned-off-by:
Jérôme Glisse <jglisse@redhat.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by:
-
Jérôme Glisse authored
HMM pages (private or public device pages) are ZONE_DEVICE page and thus need special handling when it comes to lru or refcount. This patch make sure that memcontrol properly handle those when it face them. Those pages are use like regular pages in a process address space either as anonymous page or as file back page. So from memcg point of view we want to handle them like regular page for now at least. Link: http://lkml.kernel.org/r/20170817000548.32038-11-jglisse@redhat.comSigned-off-by:
Balbir Singh <bsingharora@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Nellans <dnellans@nvidia.com> Cc: Evgeny Baskakov <ebaskakov@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mark Hairgrove <mhairgrove@nvidia.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sherry Cheung <SCheung@nvidia.com> Cc: Subhash Gutti <sgutti@nvidia.com> Cc: Bob Liu <liubo95@huawei.com> Signed-off-by:
-
Jérôme Glisse authored
A ZONE_DEVICE page that reach a refcount of 1 is free ie no longer have any user. For device private pages this is important to catch and thus we need to special case put_page() for this. Link: http://lkml.kernel.org/r/20170817000548.32038-9-jglisse@redhat.comSigned-off-by:
-
Jérôme Glisse authored
HMM (heterogeneous memory management) need struct page to support migration from system main memory to device memory. Reasons for HMM and migration to device memory is explained with HMM core patch. This patch deals with device memory that is un-addressable memory (ie CPU can not access it). Hence we do not want those struct page to be manage like regular memory. That is why we extend ZONE_DEVICE to support different types of memory. A persistent memory type is define for existing user of ZONE_DEVICE and a new device un-addressable type is added for the un-addressable memory type. There is a clear separation between what is expected from each memory type and existing user of ZONE_DEVICE are un-affected by new requirement and new use of the un-addressable type. All specific code path are protect with test against the memory type. Because memory is un-addressable we use a new special swap type for when a page is migrated to device memory (this reduces the number of maximum swap file). The main two additions beside memory type to ZONE_DEVICE is two callbacks. First one, page_free() is call whenever page refcount reach 1 (which means the page is free as ZONE_DEVICE page never reach a refcount of 0). This allow device driver to manage its memory and associated struct page. The second callback page_fault() happens when there is a CPU access to an address that is back by a device page (which are un-addressable by the CPU). This callback is responsible to migrate the page back to system main memory. Device driver can not block migration back to system memory, HMM make sure that such page can not be pin into device memory. If device is in some error condition and can not migrate memory back then a CPU page fault to device memory should end with SIGBUS. [arnd@arndb.de: fix warning] Link: http://lkml.kernel.org/r/20170823133213.712917-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170817000548.32038-8-jglisse@redhat.comSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
- 07 Sep, 2017 1 commit
-
-
Dan Williams authored
devm_memremap_pages() records mapped ranges in pgmap_radix with an entry per section's worth of memory (128MB). The key for each of those entries is a section number. This leads to false positives when devm_memremap_pages() is passed a section-unaligned range as lookups in the misalignment fail to return NULL. We can close this hole by using the pfn as the key for entries in the tree. The number of entries required to describe a remapped range is reduced by leveraging multi-order entries. In practice this approach usually yields just one entry in the tree if the size and starting address are of the same power-of-2 alignment. Previously we always needed nr_entries = mapping_size / 128MB. Link: https://lists.01.org/pipermail/linux-nvdimm/2016-August/006666.html Link: http://lkml.kernel.org/r/150215410565.39310.13767886055248249438.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
- 18 Jul, 2017 1 commit
-
-
Tom Lendacky authored
Boot data (such as EFI related data) is not encrypted when the system is booted because UEFI/BIOS does not run with SME active. In order to access this data properly it needs to be mapped decrypted. Update early_memremap() to provide an arch specific routine to modify the pagetable protection attributes before they are applied to the new mapping. This is used to remove the encryption mask for boot related data. Update memremap() to provide an arch specific routine to determine if RAM remapping is allowed. RAM remapping will cause an encrypted mapping to be generated. By preventing RAM remapping, ioremap_cache() will be used instead, which will provide a decrypted mapping of the boot related data. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by:
Borislav Petkov <bp@suse.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Dave Young <dyoung@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Toshimitsu Kani <toshi.kani@hpe.com> Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/81fb6b4117a5df6b9f2eda342f81bbef4b23d2e5.1500319216.git.thomas.lendacky@amd.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 06 Jul, 2017 2 commits
-
-
Michal Hocko authored
arch_add_memory gets for_device argument which then controls whether we want to create memblocks for created memory sections. Simplify the logic by telling whether we want memblocks directly rather than going through pointless negation. This also makes the api easier to understand because it is clear what we want rather than nothing telling for_device which can mean anything. This shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20170515085827.16474-13-mhocko@kernel.orgSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Michal Hocko authored
The current memory hotplug implementation relies on having all the struct pages associate with a zone/node during the physical hotplug phase (arch_add_memory->__add_pages->__add_section->__add_zone). In the vast majority of cases this means that they are added to ZONE_NORMAL. This has been so since 9d99aaa3 ("[PATCH] x86_64: Support memory hotadd without sparsemem") and it wasn't a big deal back then because movable onlining didn't exist yet. Much later memory hotplug wanted to (ab)use ZONE_MOVABLE for movable onlining 511c2aba ("mm, memory-hotplug: dynamic configure movable memory and portion memory") and then things got more complicated. Rather than reconsidering the zone association which was no longer needed (because the memory hotplug already depended on SPARSEMEM) a convoluted semantic of zone shifting has been developed. Only the currently last memblock or the one adjacent to the zone_movable can be onlined movable. This essentially means that the online type changes as the new memblocks are added. Let's simulate memory hot online manually $ echo 0x100000000 > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory32/valid_zones Normal Movable $ echo $((0x100000000+(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable $ echo $((0x100000000+2*(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal /sys/devices/system/memory/memory34/valid_zones:Normal Movable $ echo online_movable > /sys/devices/system/memory/memory34/state $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Normal This is an awkward semantic because an udev event is sent as soon as the block is onlined and an udev handler might want to online it based on some policy (e.g. association with a node) but it will inherently race with new blocks showing up. This patch changes the physical online phase to not associate pages with any zone at all. All the pages are just marked reserved and wait for the onlining phase to be associated with the zone as per the online request. There are only two requirements - existing ZONE_NORMAL and ZONE_MOVABLE cannot overlap - ZONE_NORMAL precedes ZONE_MOVABLE in physical addresses the latter one is not an inherent requirement and can be changed in the future. It preserves the current behavior and made the code slightly simpler. This is subject to change in future. This means that the same physical online steps as above will lead to the following state: Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Implementation: The current move_pfn_range is reimplemented to check the above requirements (allow_online_pfn_range) and then updates the respective zone (move_pfn_range_to_zone), the pgdat and links all the pages in the pfn range with the zone/node. __add_pages is updated to not require the zone and only initializes sections in the range. This allowed to simplify the arch_add_memory code (s390 could get rid of quite some of code). devm_memremap_pages is the only user of arch_add_memory which relies on the zone association because it only hooks into the memory hotplug only half way. It uses it to associate the new memory with ZONE_DEVICE but doesn't allow it to be {on,off}lined via sysfs. This means that this particular code path has to call move_pfn_range_to_zone explicitly. The original zone shifting code is kept in place and will be removed in the follow up patch for an easier review. Please note that this patch also changes the original behavior when offlining a memory block adjacent to another zone (Normal vs. Movable) used to allow to change its movable type. This will be handled later. [richard.weiyang@gmail.com: simplify zone_intersects()] Link: http://lkml.kernel.org/r/20170616092335.5177-1-richard.weiyang@gmail.com [richard.weiyang@gmail.com: remove duplicate call for set_page_links] Link: http://lkml.kernel.org/r/20170616092335.5177-2-richard.weiyang@gmail.com [akpm@linux-foundation.org: remove unused local `i'] Link: http://lkml.kernel.org/r/20170515085827.16474-12-mhocko@kernel.orgSigned-off-by:
Wei Yang <richard.weiyang@gmail.com> Tested-by:
Reza Arbab <arbab@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # For s390 bits Acked-by:
-
- 01 May, 2017 1 commit
-
-
Dan Williams authored
The x86 conversion to the generic GUP code included a small change which causes crashes and data corruption in the pmem code - not good. The root cause is that the /dev/pmem driver code implicitly relies on the x86 get_user_pages() implementation doing a get_page() on the page refcount, because get_page() does a get_zone_device_page() which properly refcounts pmem's separate page struct arrays that are not present in the regular page struct structures. (The pmem driver does this because it can cover huge memory areas.) But the x86 conversion to the generic GUP code changed the get_page() to page_cache_get_speculative() which is faster but doesn't do the get_zone_device_page() call the pmem code relies on. One way to solve the regression would be to change the generic GUP code to use get_page(), but that would slow things down a bit and punish other generic-GUP using architectures for an x86-ism they did not care about. (Arguably the pmem driver was probably not working reliably for them: but nvdimm is an Intel feature, so non-x86 exposure is probably still limited.) So restructure the pmem code's interface with the MM instead: get rid of the get/put_zone_device_page() distinction, integrate put_zone_device_page() into __put_page() and and restructure the pmem completion-wait and teardown machinery: Kirill points out that the calls to {get,put}_dev_pagemap() can be removed from the mm fast path if we take a single get_dev_pagemap() reference to signify that the page is alive and use the final put of the page to drop that reference. This does require some care to make sure that any waits for the percpu_ref to drop to zero occur *after* devm_memremap_page_release(), since it now maintains its own elevated reference. This speeds up things while also making the pmem refcounting more robust going forward. Suggested-by:Kirill Shutemov <kirill.shutemov@linux.intel.com> Tested-by:
-
- 16 Mar, 2017 1 commit
-
-
Heiko Carstens authored
Commit bfc8c901 ("mem-hotplug: implement get/put_online_mems") introduced new functions get/put_online_mems() and mem_hotplug_begin/end() in order to allow similar semantics for memory hotplug like for cpu hotplug. The corresponding functions for cpu hotplug are get/put_online_cpus() and cpu_hotplug_begin/done() for cpu hotplug. The commit however missed to introduce functions that would serialize memory hotplug operations like they are done for cpu hotplug with cpu_maps_update_begin/done(). This basically leaves mem_hotplug.active_writer unprotected and allows concurrent writers to modify it, which may lead to problems as outlined by commit f931ab47 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}"). That commit was extended again with commit b5d24fda ("mm, devm_memremap_pages: hold device_hotplug lock over mem_hotplug_{begin, done}") which serializes memory hotplug operations for some call sites by using the device_hotplug lock. In addition with commit 3fc21924 ("mm: validate device_hotplug is held for memory hotplug") a sanity check was added to mem_hotplug_begin() to verify that the device_hotplug lock is held. This in turn triggers the following warning on s390: WARNING: CPU: 6 PID: 1 at drivers/base/core.c:643 assert_held_device_hotplug+0x4a/0x58 Call Trace: assert_held_device_hotplug+0x40/0x58) mem_hotplug_begin+0x34/0xc8 add_memory_resource+0x7e/0x1f8 add_memory+0xda/0x130 add_memory_merged+0x15c/0x178 sclp_detect_standby_memory+0x2ae/0x2f8 do_one_initcall+0xa2/0x150 kernel_init_freeable+0x228/0x2d8 kernel_init+0x2a/0x140 kernel_thread_starter+0x6/0xc One possible fix would be to add more lock_device_hotplug() and unlock_device_hotplug() calls around each call site of mem_hotplug_begin/end(). But that would give the device_hotplug lock additional semantics it better should not have (serialize memory hotplug operations). Instead add a new memory_add_remove_lock which has the similar semantics like cpu_add_remove_lock for cpu hotplug. To keep things hopefully a bit easier the lock will be locked and unlocked within the mem_hotplug_begin/end() functions. Link: http://lkml.kernel.org/r/20170314125226.16779-2-heiko.carstens@de.ibm.comSigned-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reported-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 25 Feb, 2017 1 commit
-
-
Dan Williams authored
The mem_hotplug_{begin,done} lock coordinates with {get,put}_online_mems() to hold off "readers" of the current state of memory from new hotplug actions. mem_hotplug_begin() expects exclusive access, via the device_hotplug lock, to set mem_hotplug.active_writer. Calling mem_hotplug_begin() without locking device_hotplug can lead to corrupting mem_hotplug.refcount and missed wakeups / soft lockups. [dan.j.williams@intel.com: v2] Link: http://lkml.kernel.org/r/148728203365.38457.17804568297887708345.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/148693885680.16345.17802627926777862337.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: f931ab47 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Signed-off-by:Ben Hutchings <ben@decadent.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 11 Jan, 2017 1 commit
-
-
Dan Williams authored
Both arch_add_memory() and arch_remove_memory() expect a single threaded context. For example, arch/x86/mm/init_64.c::kernel_physical_mapping_init() does not hold any locks over this check and branch: if (pgd_val(*pgd)) { pud = (pud_t *)pgd_page_vaddr(*pgd); paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end), page_size_mask); continue; } pud = alloc_low_page(); paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end), page_size_mask); The result is that two threads calling devm_memremap_pages() simultaneously can end up colliding on pgd initialization. This leads to crash signatures like the following where the loser of the race initializes the wrong pgd entry: BUG: unable to handle kernel paging request at ffff888ebfff0000 IP: memcpy_erms+0x6/0x10 PGD 2f8e8fc067 PUD 0 /* <---- Invalid PUD */ Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 54 PID: 3818 Comm: systemd-udevd Not tainted 4.6.7+ #13 task: ffff882fac290040 ti: ffff882f887a4000 task.ti: ffff882f887a4000 RIP: memcpy_erms+0x6/0x10 [..] Call Trace: ? pmem_do_bvec+0x205/0x370 [nd_pmem] ? blk_queue_enter+0x3a/0x280 pmem_rw_page+0x38/0x80 [nd_pmem] bdev_read_page+0x84/0xb0 Hold the standard memory hotplug mutex over calls to arch_{add,remove}_memory(). Fixes: 41e94a85 ("add devm_memremap_pages") Link: http://lkml.kernel.org/r/148357647831.9498.12606007370121652979.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
- 10 Sep, 2016 1 commit
-
-
Dan Williams authored
track_pfn_insert() in vmf_insert_pfn_pmd() is marking dax mappings as uncacheable rendering them impractical for application usage. DAX-pte mappings are cached and the goal of establishing DAX-pmd mappings is to attain more performance, not dramatically less (3 orders of magnitude). track_pfn_insert() relies on a previous call to reserve_memtype() to establish the expected page_cache_mode for the range. While memremap() arranges for reserve_memtype() to be called, devm_memremap_pages() does not. So, teach track_pfn_insert() and untrack_pfn() how to handle tracking without a vma, and arrange for devm_memremap_pages() to establish the write-back-cache reservation in the memtype tree. Cc: <stable@vger.kernel.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Kai Zhang <kai.ka.zhang@oracle.com> Acked-by:
-
- 28 Jul, 2016 1 commit
-
-
Dan Williams authored
Now that ZONE_DEVICE depends on SPARSEMEM_VMEMMAP we can simplify some ifdef guards to just ZONE_DEVICE. Link: http://lkml.kernel.org/r/146687646788.39261.8020536391978771940.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
- 24 Jun, 2016 1 commit
-
-
Dan Williams authored
Currently phys_to_pfn_t() is an exported symbol to allow nfit_test to override it and indicate that nfit_test-pmem is not device-mapped. Now, we want to enable nfit_test to operate without DMA_CMA and the pmem it provides will no longer be physically contiguous, i.e. won't be capable of supporting direct_access requests larger than a page. Make pmem_direct_access() a weak symbol so that it can be replaced by the tools/testing/nvdimm/ version, and move phys_to_pfn_t() to a static inline now that it no longer needs to be overridden. Acked-by:
-
- 04 Apr, 2016 1 commit
-
-
Ard Biesheuvel authored
Currently, the memremap code serves MEMREMAP_WB mappings directly from the kernel direct mapping, unless the region is in high memory, in which case it falls back to using ioremap_cache(). However, the semantics of ioremap_cache() are not unambiguously defined, and on ARM, it will actually result in a mapping type that differs from the attributes used for the linear mapping, and for this reason, the ioremap_cache() call fails if the region is part of the memory managed by the kernel. So instead, implement an optional hook 'arch_memremap_wb' whose default implementation calls ioremap_cache() as before, but which can be overridden by the architecture to do what is appropriate for it. Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org>
-
- 22 Mar, 2016 2 commits
-
-
Brian Starkey authored
Add a flag to memremap() for writecombine mappings. Mappings satisfied by this flag will not be cached, however writes may be delayed or combined into more efficient bursts. This is most suitable for buffers written sequentially by the CPU for use by other DMA devices. Signed-off-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Brian Starkey authored
These patches implement a MEMREMAP_WC flag for memremap(), which can be used to obtain writecombine mappings. This is then used for setting up dma_coherent_mem regions which use the DMA_MEMORY_MAP flag. The motivation is to fix an alignment fault on arm64, and the suggestion to implement MEMREMAP_WC for this case was made at [1]. That particular issue is handled in patch 4, which makes sure that the appropriate memset function is used when zeroing allocations mapped as IO memory. This patch (of 4): Don't modify the flags input argument to memremap(). MEMREMAP_WB is already a special case so we can check for it directly instead of clearing flag bits in each mapper. Signed-off-by:
-
- 15 Mar, 2016 1 commit
-
-
Andreas Ziegler authored
Commit 4b94ffdc ("x86, mm: introduce vmem_altmap to augment vmemmap_populate()"), introduced the to_vmem_altmap() function. The comments in this function contain two typos (one misspelling of the Kconfig option CONFIG_SPARSEMEM_VMEMMAP, and one missing letter 'n'), let's fix them up. Signed-off-by:
Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by:
-
- 09 Mar, 2016 3 commits
-
-
Ard Biesheuvel authored
In memremap's helper function try_ram_remap(), we dereference a struct page pointer that was derived from a PFN that is known to be covered by a 'System RAM' iomem region, and is thus assumed to be a 'valid' PFN, i.e., a PFN that has a struct page associated with it and is covered by the kernel direct mapping. However, the assumption that there is a 1:1 relation between the System RAM iomem region and the kernel direct mapping is not universally valid on all architectures, and on ARM and arm64, 'System RAM' may include regions for which pfn_valid() returns false. Generally speaking, both __va() and pfn_to_page() should only ever be called on PFNs/physical addresses for which pfn_valid() returns true, so add that check to try_ram_remap(). Signed-off-by:
-
Dan Williams authored
The check for whether we overlap "System RAM" needs to be done at section granularity. For example a system with the following mapping: 100000000-37bffffff : System RAM 37c000000-837ffffff : Persistent Memory ...is unable to use devm_memremap_pages() as it would result in two zones colliding within a given section. Signed-off-by: -
Dan Williams authored
Given we have uninitialized list_heads being passed to list_add() it will always be the case that those uninitialized values randomly trigger the poison value. Especially since a list_add() operation will seed the stack with the poison value for later stack allocations to trip over. For example, see these two false positive reports: list_add attempted on force-poisoned entry WARNING: at lib/list_debug.c:34 [..] NIP [c00000000043c390] __list_add+0xb0/0x150 LR [c00000000043c38c] __list_add+0xac/0x150 Call Trace: __list_add+0xac/0x150 (unreliable) __down+0x4c/0xf8 down+0x68/0x70 xfs_buf_lock+0x4c/0x150 [xfs] list_add attempted on force-poisoned entry(0000000000000500), new->next == d0000000059ecdb0, new->prev == 0000000000000500 WARNING: at lib/list_debug.c:33 [..] NIP [c00000000042db78] __list_add+0xa8/0x140 LR [c00000000042db74] __list_add+0xa4/0x140 Call Trace: __list_add+0xa4/0x140 (unreliable) rwsem_down_read_failed+0x6c/0x1a0 down_read+0x58/0x60 xfs_log_commit_cil+0x7c/0x600 [xfs] Fixes: commit 5c2c2587 ("mm, dax, pmem: introduce {get|put}_dev_pagemap() for dax-gup") Signed-off-by:Eryu Guan <eguan@redhat.com> Tested-by:
-
- 24 Feb, 2016 1 commit
-
-
Toshi Kani authored
devm_memremap() returns an ERR_PTR() value in case of error. However, it returns NULL when memremap() failed. This causes the caller, such as the pmem driver, to proceed and oops later. Change devm_memremap() to return ERR_PTR(-ENXIO) when memremap() failed. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
- 19 Feb, 2016 1 commit
-
-
Toshi Kani authored
The pmem driver calls devm_memremap() to map a persistent memory range. When the pmem driver is unloaded, this memremap'd range is not released so the kernel will leak a vma. Fix devm_memremap_release() to handle a given memremap'd address properly. Signed-off-by:
-
- 12 Feb, 2016 1 commit
-
-
Dan Williams authored
The pfn_t type uses an unsigned long to store a pfn + flags value. On a 64-bit platform the upper 12 bits of an unsigned long are never used for storing the value of a pfn. However, this is not true on highmem platforms, all 32-bits of a pfn value are used to address a 44-bit physical address space. A pfn_t needs to store a 64-bit value. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112211 Fixes: 01c8f1c4 ("mm, dax, gpu: convert vm_insert_mixed to pfn_t") Signed-off-by:
Stuart Foster <smf.linux@ntlworld.com> Reported-by:
Julian Margetson <runaway@candw.ms> Tested-by:
-
- 31 Jan, 2016 1 commit
-
-
Dan Williams authored
A dma_addr_t is potentially smaller than a phys_addr_t on some archs. Don't truncate the address when doing the pfn conversion. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by:
Matthew Wilcox <willy@linux.intel.com> [willy: fix pfn_t_to_phys as well] Signed-off-by:
-
- 30 Jan, 2016 2 commits
-
-
Toshi Kani authored
Change region_intersects() to identify a target with @flags and @desc, instead of @name with strcmp(). Change the callers of region_intersects(), memremap() and devm_memremap(), to set IORESOURCE_SYSTEM_RAM in @flags and IORES_DESC_NONE in @desc when searching System RAM. Also, export region_intersects() so that the ACPI EINJ error injection driver can call this function in a later patch. Signed-off-by:
-
Dan Williams authored
to_vmem_altmap() needs to return valid results until arch_remove_memory() completes. It also needs to be valid for any pfn in a section regardless of whether that pfn maps to data. This escape was a result of a bug in the unit test. The signature of this bug is that free_pagetable() fails to retrieve a vmem_altmap and goes off into the weeds: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff811d2629>] get_pfnblock_flags_mask+0x49/0x60 [..] Call Trace: [<ffffffff811d3477>] free_hot_cold_page+0x97/0x1d0 [<ffffffff811d367a>] __free_pages+0x2a/0x40 [<ffffffff8191e669>] free_pagetable+0x8c/0xd4 [<ffffffff8191ef4e>] remove_pagetable+0x37a/0x808 [<ffffffff8191b210>] vmemmap_free+0x10/0x20 Fixes: 4b94ffdc ("x86, mm: introduce vmem_altmap to augment vmemmap_populate()") Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
- 16 Jan, 2016 5 commits
-
-
Dan Williams authored
A dax mapping establishes a pte with _PAGE_DEVMAP set when the driver has established a devm_memremap_pages() mapping, i.e. when the pfn_t return from ->direct_access() has PFN_DEV and PFN_MAP set. Later, when encountering _PAGE_DEVMAP during a page table walk we lookup and pin a struct dev_pagemap instance to keep the result of pfn_to_page() valid until put_page(). Signed-off-by:
-
Dan Williams authored
get_dev_page() enables paths like get_user_pages() to pin a dynamically mapped pfn-range (devm_memremap_pages()) while the resulting struct page objects are in use. Unlike get_page() it may fail if the device is, or is in the process of being, disabled. While the initial lookup of the range may be an expensive list walk, the result is cached to speed up subsequent lookups which are likely to be in the same mapped range. devm_memremap_pages() now requires a reference counter to be specified at init time. For pmem this means moving request_queue allocation into pmem_alloc() so the existing queue usage counter can track "device pages". ZONE_DEVICE pages always have an elevated count and will never be on an lru reclaim list. That space in 'struct page' can be redirected for other uses, but for safety introduce a poison value that will always trip __list_add() to assert. This allows half of the struct list_head storage to be reclaimed with some assurance to back up the assumption that the page count never goes to zero and a list_add() is never attempted. Signed-off-by:
-
Dan Williams authored
In support of providing struct page for large persistent memory capacities, use struct vmem_altmap to change the default policy for allocating memory for the memmap array. The default vmemmap_populate() allocates page table storage area from the page allocator. Given persistent memory capacities relative to DRAM it may not be feasible to store the memmap in 'System Memory'. Instead vmem_altmap represents pre-allocated "device pages" to satisfy vmemmap_alloc_block_buf() requests. Signed-off-by:
kbuild test robot <lkp@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Dan Williams authored
There are several scenarios where we need to retrieve and update metadata associated with a given devm_memremap_pages() mapping, and the only lookup key available is a pfn in the range: 1/ We want to augment vmemmap_populate() (called via arch_add_memory()) to allocate memmap storage from pre-allocated pages reserved by the device driver. At vmemmap_alloc_block_buf() time it grabs device pages rather than page allocator pages. This is in support of devm_memremap_pages() mappings where the memmap is too large to fit in main memory (i.e. large persistent memory devices). 2/ Taking a reference against the mapping when inserting device pages into the address_space radix of a given inode. This facilitates unmap_mapping_range() and truncate_inode_pages() operations when the driver is tearing down the mapping. 3/ get_user_pages() operations on ZONE_DEVICE memory require taking a reference against the mapping so that the driver teardown path can revoke and drain usage of device pages. Signed-off-by:
-
Dan Williams authored
For the purpose of communicating the optional presence of a 'struct page' for the pfn returned from ->direct_access(), introduce a type that encapsulates a page-frame-number plus flags. These flags contain the historical "page_link" encoding for a scatterlist entry, but can also denote "device memory". Where "device memory" is a set of pfns that are not part of the kernel's linear mapping by default, but are accessed via the same memory controller as ram. The motivation for this new type is large capacity persistent memory that needs struct page entries in the 'memmap' to support 3rd party DMA (i.e. O_DIRECT I/O with a persistent memory source/target). However, we also need it in support of maintaining a list of mapped inodes which need to be unmapped at driver teardown or freeze_bdev() time. Signed-off-by:
-
