- 23 Mar, 2011 40 commits
-
-
Dan Carpenter authored
This patch converts rd_build_device_space() to return errno usage for failures in rd_create_virtdevice(). Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Nicholas A. Bellinger <nab@linux-iscsi.org> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Nicholas Bellinger authored
Reported-by:
Fubo Chen <fubo.chen@gmail.com> Cc: James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
Dan Carpenter authored
This patch addresses the majority of sparse warnings and adds proper locking annotations. It also fixes the dubious one-bit signed bitfield, for which the signed one-bit types can be 0 or -1 which can cause a problem if someone ever checks if (foo->lu_gp_assoc == 1). The current code is fine because everyone just checks zero vs non-zero. But Sparse complains about it so lets change it. The warnings look like this: include/target/target_core_base.h:228:26: error: dubious one-bit signed bitfield Signed-off-by:
-
Fubo Chen authored
This patch removes a legacy struct se_hba->hba_dev_list -> se_release_device_for_hba() list walk in core_delete_hba(), which is no longer required while using configfs VFS level parent/child struct config_group dependency referencing. The reason is because any struct se_hba->hba_dev_list-> struct se_device members are going to have to be released via: rmdir /sys/kernel/config/target/core/$HBA/* before rmdir release of struct se_hba via target_core_configfs.c: target_core_call_delhbafromtarget() -> core_delete_hba() rmdir /sys/kernel/config/target/core/$HBA to release struct se_hba in core_delete_hba(). This patch also removes the legacy se_clear_dev_ports() function, which is left-over pre-configfs shutdown logic for when se_free_virtual_device() was responsible for walking struct se_device->dev_sep_list and calling core_dev_del_lun() for each individual active struct se_port->se_lun. The reason this can be removed is because all struct se_device->dev_sep_list -> struct se_port communication is done via configfs symlinks, which means that an target fabric module's endpoints containg active struct se_port(s) will have to be released via target_core_fabric_configfs.c: target_fabric_port_unlink() via: unlink /sys/kernel/config/target/$FABRIC_MOD/$ENDPOINT/tpgt_$TPGT/lun/lun_$LUN_ID/<symlink> before rmdir release of struct se_device in target_core_configfs.c: target_core_drop_subdev() -> se_free_virtual_device() can happen via: rmdir /sys/kernel/config/target/core/$HBA/* to release struct se_subsystem_dev in target_core_drop_subdev() Reported-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Reported-by:
-
Nicholas Bellinger authored
This patch converts the target_core_store_dev_enable() -> struct se_subsystem_api->create_virtdevice() call to return proper ERR_PTR values back up to configfs logic during backend dependent struct se_device ENABLE exception conditions. Along with the change to target_core_configfs.c, this includes converting IBLOCK, FILEIO, pSCSI, and RAMDISK_* backend subsystem plugins to obtain upper level PTR_ERR return codes (where available), and return via ERR_PTR during a *_create_virtdev() failure. Reported-by:
-
Christoph Hellwig authored
Add the current directory is superflous in general, and no includes in drivers/scsi are needed either. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Nicholas Bellinger authored
This patch converts the tcm_mod_builder.py generation script to create a new drivers/target/$TCM_FABRIC_MOD/Makefile and update drivers/target/Makefile, instead of creating+updating a 'Kbuild' filename. It also removes the remaining EXTRA_CFLAGS includes from tcm_mod_build_kbuild(), and converts fabric module generated .c code to us ""-style includes for $FABRIC_MOD_[base,fabric].h Reported-by:
-
Jesper Juhl authored
match_strdup() dynamically allocates memory and it is the responsabillity of the caller to free that memory. The following three cases: drivers/target/target_core_file.c:fd_set_configfs_dev_params() drivers/target/target_core_iblock.c:iblock_set_configfs_dev_params() drivers/target/target_core_configfs.c:target_core_dev_pr_store_attr_res_aptpl_metadata() should be kfree()'ing the allocated memory once it is no longer needed. It also makes sure to return -ENOMEM if the memory allocation in match_strdup() should fail. For target_core_configfs.c, this patch adds kfree()'s around Opt_initiator_fabric, Opt_initiator_node, Opt_initiator_sid, Opt_sa_res_key, Opt_target_fabric, and Opt_target_node for the Persistent Reservations Activate Persistence across Target Power Loss (APTPL=1) token parsing. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Roland Dreier authored
If allocation of pt->pscsi_cdb fails, we need to free the just-allocated pt or else it will be leaked. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
James Smart authored
Update driver version to 8.3.22 Signed-off-by:
Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Update Copyright Dates Signed-off-by:
-
James Smart authored
FC Discovery fixes - In lpfc_sli4_bpl2sgl byte swapping the SGL in word2. - In lpfc_sli4_iocb2wqe byteswap the data for CMD_GEN_REQUEST64_CR type WQE. - In lpfc_sli4_seq_abort_acc do not set the oxid into the iocb's xritag field. - In lpfc_sli4_seq_abort_acc check the return value of lpfc_sli_issue_iocb. - Inprove messages in this area. Signed-off-by:
-
James Smart authored
Periodically poll adapter registers to detect pci adapter failure (reads return -1). On failure, take port offline, set error indicators and wake up worker threads. Threads will take adapter offline. Signed-off-by:
-
James Smart authored
T10-DIF corrections - Add selective reset jump table entry - Split T10-DIF BDEs that cross 4K boundary Signed-off-by:
-
James Smart authored
- Add new Queue Create Mailbox version support - Make lpfc_bsg_wake_mbox_wait routine check the mailboxes job reference before using it. Signed-off-by:
-
Krishnasamy, Somasundaram authored
During device discovery, scsi mid layer sends INQUIRY command to LUN 0. If the LUN 0 is not mapped to host, it creates a temporary scsi_device with LUN id 0 and sends REPORT_LUNS command to it. After the REPORT_LUNS succeeds, it walks through the LUN table and adds each LUN found to sysfs. At the end of REPORT_LUNS lun table scan, it will delete the temporary scsi_device of LUN 0. When scsi devices are added to sysfs, it calls add_dev function of all the registered class interfaces. If ses driver has been registered, ses_intf_add() of ses module will be called. This function calls scsi_device_enclosure() to check the inquiry data for EncServ bit. Since inquiry was not allocated for temporary LUN 0 scsi_device, it will cause NULL pointer exception. To fix the problem, sdev->inquiry is checked for NULL before reading it. Signed-off-by:
Somasundaram Krishnasamy <Somasundaram.Krishnasamy@lsi.com> Signed-off-by:
Babu Moger <babu.moger@lsi.com> Cc: stable@kernel.org Signed-off-by:
-
HighPoint Linux Team authored
This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset. Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by:
-
Vasiliy Kulikov authored
Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Acked-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
John Hughes authored
enclosure page 7 gives us the "pretty" names of the enclosure slots. Without a page 7, we can still use the enclosure code as long as we make up numeric names for the slots. Unfortunately, the current code fails to add any devices because the check for page 10 is in the wrong place if we have no page 7. Fix it so that devices show up even if the enclosure has no page 7. Cc: stable@kernel.org Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Realtek: Avoid unnecessary volume control index on Surround/Side ASoC: Support !REGULATOR build for sgtl5000 ALSA: hda - VIA: Fix VT1708 can't build up Headphone control issue ALSA: hda - VIA: Correct stream names for VT1818S ALSA: hda - VIA: Fix codec type for VT1708BCE at the right timing ALSA: hda - VIA: Fix invalid A-A path volume adjust issue ALSA: hda - VIA: Add missing support for VT1718S in A-A path ALSA: hda - VIA: Fix independent headphone no sound issue ALSA: hda - VIA: Fix stereo mixer recording no sound issue ALSA: hda - Set EAPD for Realtek ALC665 ALSA: usb - Remove trailing spaces from USB card name strings sound: read i_size with i_size_read() ASoC: Remove bogus check for register validity in debugfs write ASoC: mini2440: Fix uda134x codec problem.
-
Cesar Eduardo Barros authored
A conflict between 52c50567 ("mm: swap: unlock swapfile inode mutex before closing file on bad swapfiles") and 83ef99be ("sys_swapon: remove did_down variable") caused a double unlock of the inode mutex (once in bad_swap: before the filp_close, once at the end just before returning). The patch which added the extra unlock cleared did_down to avoid unlocking twice, but the other patch removed the did_down variable. To fix, set inode to NULL after the first unlock, since it will be used after that point only for the final unlock. While checking this patch, I found a path which could unlock without locking, in case the same inode was added as a swapfile twice. To fix, move the setting of the inode variable further down, to just before claim_swapfile, which will lock the inode before doing anything else. Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Eric B Munson <emunson@mgebm.net> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Heiko Carstens authored
Commit 34db18a0 ("smp: move smp setup functions to kernel/smp.c") causes this build error on s390 because of a missing init.h include: CC arch/s390/kernel/asm-offsets.s In file included from /home2/heicarst/linux-2.6/arch/s390/include/asm/spinlock.h:14:0, from include/linux/spinlock.h:87, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:56, from include/linux/sched.h:57, from arch/s390/kernel/asm-offsets.c:10: include/linux/smp.h:117:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'setup_nr_cpu_ids' include/linux/smp.h:118:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'smp_init' Fix it by adding the include statement. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
WANG Cong <amwang@redhat.com> Signed-off-by:
-
Takashi Iwai authored
-
David Henningsson authored
Similar to commit 7e59e097, this patch avoids unnecessary volume control indices for more Realtek auto-parsers, e g the ALC66x family, on the "Surround" and "Side" controls. These indices cause these volume controls to be ignored by PulseAudio and vmaster and should be removed whenever possible. Cc: stable@kernel.org Reported-by:
Jan Losinski <losinski@wh2.tu-dresden.de> Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
-
Jean Delvare authored
I'm not sure why the read-only data section is excluded from the report, it seems as relevant as the other data sections (b and d). I've stripped the symbols starting with __mod_ as they can have their names dynamically generated and thus comparison between binaries is not possible. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Andi Kleen <andi@firstfloor.org> Acked-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jim Keniston authored
Instead of always creating a huge (268K) deflate_workspace with the maximum compression parameters (windowBits=15, memLevel=8), allow the caller to obtain a smaller workspace by specifying smaller parameter values. For example, when capturing oops and panic reports to a medium with limited capacity, such as NVRAM, compression may be the only way to capture the whole report. In this case, a small workspace (24K works fine) is a win, whether you allocate the workspace when you need it (i.e., during an oops or panic) or at boot time. I've verified that this patch works with all accepted values of windowBits (positive and negative), memLevel, and compression level. Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Miller <davem@davemloft.net> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by:
-
Andrey Vagin authored
d_alloc_name return NULL in case error, but we expect errno in devpts_pty_new. Addresses http://bugzilla.openvz.org/show_bug.cgi?id=1758Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
-
Roland Dreier authored
The test program below will hang because io_getevents() uses add_wait_queue_exclusive(), which means the wake_up() in io_destroy() only wakes up one of the threads. Fix this by using wake_up_all() in the aio code paths where we want to make sure no one gets stuck. // t.c -- compile with gcc -lpthread -laio t.c #include <libaio.h> #include <pthread.h> #include <stdio.h> #include <unistd.h> static const int nthr = 2; void *getev(void *ctx) { struct io_event ev; io_getevents(ctx, 1, 1, &ev, NULL); printf("io_getevents returned\n"); return NULL; } int main(int argc, char *argv[]) { io_context_t ctx = 0; pthread_t thread[nthr]; int i; io_setup(1024, &ctx); for (i = 0; i < nthr; ++i) pthread_create(&thread[i], NULL, getev, ctx); sleep(1); io_destroy(ctx); for (i = 0; i < nthr; ++i) pthread_join(thread[i], NULL); return 0; } Signed-off-by:Roland Dreier <roland@purestorage.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Alexander Gordeev authored
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is not used in the vanilla kernel. Signed-off-by:
Alexander Gordeev <lasaine@lvk.cs.msu.su> Cc: john stultz <johnstul@us.ibm.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by:
-
Stuart Swales authored
ADFS (FileCore) storage complies with the RISC OS filetype specification (12 bits of file type information is stored in the file load address, rather than using a file extension). The existing driver largely ignores this information and does not present it to the end user. It is desirable that stored filetypes be made visible to the end user to facilitate a precise copy of data and metadata from a hard disc (or image thereof) into a RISC OS emulator (such as RPCEmu) or to a network share which can be accessed by real Acorn systems. This patch implements a per-mount filetype suffix option (use -o ftsuffix=1) to present any filetype as a ,xyz hexadecimal suffix on each file. This type suffix is compatible with that used by RISC OS systems that access network servers using NFS client software and by RPCemu's host filing system. Signed-off-by:
Stuart Swales <stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Stuart Swales authored
ADFS (FileCore) storage complies with the RISC OS timestamp specification (40-bit centiseconds since 01 Jan 1900 00:00:00). It is desirable that stored timestamp precision be maintained to facilitate a precise copy of data and metadata from a hard disc (or image thereof) into a RISC OS emulator (such as RPCEmu). This patch implements a full-precision conversion from ADFS to Unix timestamp as the existing driver, for ease of calculation with old 32-bit compilers, uses the common trick of shifting the 40-bits representing centiseconds around into 32-bits representing seconds thereby losing precision. Signed-off-by: Stuart Swales<stuart.swales.croftnuisk@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Stuart Swales authored
Kernel crashes in fs/adfs module when accessing directories with a large number of objects on mounted Acorn ADFS E+/F+ format discs (or images) as the existing code writes off the end of the fixed array of struct buffer_head pointers. Additionally, each directory access that didn't crash would leak a buffer as nr_buffers was not adjusted correctly for E+/F+ discs (was always left as one less than required). The patch fixes this by allocating a dynamically-sized set of struct buffer_head pointers if necessary for the E+/F+ case (many directories still do in fact fit in 2048 bytes) and sets the correct nr_buffers so that all buffers are released. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26072 Tested by tar'ing the contents of my RISC PC's E+ format 20Gb HDD which contains a number of large directories that previously crashed the kernel. Signed-off-by:
-
Chen Gong authored
page-types.c doesn't supply a way to specify the debugfs path and the original debugfs path is not usual on most machines. This patch supplies a way to auto mount debugfs if needed. This patch is heavily inspired by tools/perf/utils/debugfs.c [akpm@linux-foundation.org: make functions static] [akpm@linux-foundation.org: fix debugfs_mount() signature] Signed-off-by:
Chen Gong <gong.chen@linux.intel.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Christian Kujau authored
I noticed the 'mcelog' program had no comment and then ended up "fixing" a few more things: * reiserfsck -V does not print "reiserfsprogs" (any more?) * is "udevinfo" still shipped? udevd certainly is * grub2 doesn't have a 'grub' binary * add a "# how to get the mcelog version" comment Signed-off-by:
Christian Kujau <lists@nerdbynature.de> Signed-off-by:
-
Harry Wei authored
There is a missing case for "Chapter 3: Placing Braces and Spaces". We often know we should not use braces where a single statement. The first case is: if (condition) action(); Another case is: if (condition) do_this(); else do_that(); However, I can not find a description of the second case. Signed-off-by:
Harry Wei <harryxiyou@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Rakib Mullick authored
When CONFIG_SYSCTL=n, we get the following warning: fs/coda/sysctl.c:18: warning: `coda_tabl' defined but not used Fix the warning by making sure coda_table and it's callee function are in the same context. Also clean up the code by removing extra #ifdef. [akpm@linux-foundation.org: remove unneeded stub macros] Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
-
David Rientjes authored
Not all 64-bit systems require ISA-style DMA, so allow it to be configurable. x86 utilizes the generic ISA DMA allocator from kernel/dma.c, so require it only when CONFIG_ISA_DMA_API is enabled. Disabling CONFIG_ISA_DMA_API is dependent on x86_64 since those machines do not have ISA slots and benefit the most from disabling the option (and on CONFIG_EXPERT as required by H. Peter Anvin). When disabled, this also avoids declaring claim_dma_lock(), release_dma_lock(), request_dma(), and free_dma() since those interfaces will no longer be provided. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
David Rientjes authored
The generic floppy disk driver utilizies the interface provided by CONFIG_ISA_DMA_API, specifically claim_dma_lock(), release_dma_lock(), request_dma(), and free_dma(). Thus, there's a strict dependency on the config option and the driver should only be loaded if the kernel supports ISA-style DMA. Signed-off-by:
-
David Rientjes authored
8237A utilizes the interface provided by CONFIG_ISA_DMA_API, specifically claim_dma_lock() and release_dma_lock(). Thus, there's a strict dependency on the config option and the module should only be loaded if the kernel supports ISA-style DMA. Signed-off-by:
-
