- 25 Jun, 2016 27 commits
-
-
Kirill A. Shutemov authored
This reverts commit d0834a6c. After revert of 5c0a85fa ("mm: make faultaround produce old ptes") faultaround doesn't have dependencies on hardware accessed bit, so let's revert this one too. Link: http://lkml.kernel.org/r/1465893750-44080-3-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
"Huang, Ying" <ying.huang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Kirill A. Shutemov authored
This reverts commit 5c0a85fa. The commit causes ~6% regression in unixbench. Let's revert it for now and consider other solution for reclaim problem later. Link: http://lkml.kernel.org/r/1465893750-44080-2-git-send-email-kirill.shutemov@linux.intel.comSigned-off-by:
-
Antoine Tenart authored
There are different versions of Boris' name and email in the log, and one typo. Add his emails in mailmap to have all of his contributions under the same name/email tuple. Link: http://lkml.kernel.org/r/20160609130323.27706-2-antoine.tenart@free-electrons.comSigned-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Antoine Tenart authored
I used "Antoine TÃ
© nart" at first but then moved to a name without accent as this cause some issues from time to time... Add my email in the mailmap file to have a consistent shortlog output. Link: http://lkml.kernel.org/r/20160609130323.27706-1-antoine.tenart@free-electrons.comSigned-off-by: -
Mel Gorman authored
Commit d0164adc ("mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd") modified __GFP_WAIT to explicitly identify the difference between atomic callers and those that were unwilling to sleep. Later the definition was removed entirely. The GFP_RECLAIM_MASK is the set of flags that affect watermark checking and reclaim behaviour but __GFP_ATOMIC was never added. Without it, atomic users of the slab allocator strip the __GFP_ATOMIC flag and cannot access the page allocator atomic reserves. This patch addresses the problem. The user-visible impact depends on the workload but potentially atomic allocations unnecessarily fail without this path. Link: http://lkml.kernel.org/r/20160610093832.GK2527@techsingularity.netSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Reported-by:
Marcin Wojtas <mw@semihalf.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: <stable@vger.kernel.org> [4.4+] Signed-off-by:
-
Andrey Ryabinin authored
Currently we may put reserved by mempool elements into quarantine via kasan_kfree(). This is totally wrong since quarantine may really free these objects. So when mempool will try to use such element, use-after-free will happen. Or mempool may decide that it no longer need that element and double-free it. So don't put object into quarantine in kasan_kfree(), just poison it. Rename kasan_kfree() to kasan_poison_kfree() to respect that. Also, we shouldn't use kasan_slab_alloc()/kasan_krealloc() in kasan_unpoison_element() because those functions may update allocation stacktrace. This would be wrong for the most of the remove_element call sites. (The only call site where we may want to update alloc stacktrace is in mempool_alloc(). Kmemleak solves this by calling kmemleak_update_trace(), so we could make something like that too. But this is out of scope of this patch). Fixes: 55834c59 ("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/575977C3.1010905@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by:
Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com> Acked-by:
Alexander Potapenko <glider@google.com> Cc: Dmitriy Vyukov <dvyukov@google.com> Cc: Kostya Serebryany <kcc@google.com> Signed-off-by:
-
Jon Mason authored
Update the contact info for Muli, clean-up my name, and update the mailing list to the IOMMU mailing list. Link: http://lkml.kernel.org/r/1465493059-11840-2-git-send-email-jdmason@kudzu.usSigned-off-by:
Jon Mason <jdmason@kudzu.us> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Michal Hocko authored
jbd2_alloc is explicit about its allocation preferences wrt. the allocation size. Sub page allocations go to the slab allocator and larger are using either the page allocator or vmalloc. This is all good but the logic is unnecessarily complex. 1) as per Ted, the vmalloc fallback is a left-over: : jbd2_alloc is only passed in the bh->b_size, which can't be PAGE_SIZE, so : the code path that calls vmalloc() should never get called. When we : conveted jbd2_alloc() to suppor sub-page size allocations in commit : d2eecb03, there was an assumption that it could be called with a size : greater than PAGE_SIZE, but that's certaily not true today. Moreover vmalloc allocation might even lead to a deadlock because the callers expect GFP_NOFS context while vmalloc is GFP_KERNEL. 2) __GFP_REPEAT for requests <= PAGE_ALLOC_COSTLY_ORDER is ignored since the flag was introduced. Let's simplify the code flow and use the slab allocator for sub-page requests and the page allocator for others. Even though order > 0 is not currently used as per above leave that option open. Link: http://lkml.kernel.org/r/1464599699-30131-18-git-send-email-mhocko@kernel.orgSigned-off-by:
Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. PGALLOC_GFP uses __GFP_REPEAT but it is only used in pte_alloc_one, pte_alloc_one_kernel which does order-0 request. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-17-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. pgtable_alloc_one uses __GFP_REPEAT flag for L2_USER_PGTABLE_ORDER but the order is either 0 or 3 if L2_KERNEL_PGTABLE_SHIFT for HPAGE_SHIFT. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-16-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. PGALLOC_GFP uses __GFP_REPEAT but {pgd,pmd}_alloc allocate from {pgd,pmd}_cache but both caches are allocating up to PAGE_SIZE objects. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-15-git-send-email-mhocko@kernel.orgSigned-off-by: -
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. page_table_alloc then uses the flag for a single page allocation. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-14-git-send-email-mhocko@kernel.orgSigned-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. {pud,pmd}_alloc_one is using __GFP_REPEAT but it always allocates from pgtable_cache which is initialzed to PAGE_SIZE objects. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-13-git-send-email-mhocko@kernel.orgSigned-off-by:David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. {pud,pmd}_alloc_one are allocating from {PGT,PUD}_CACHE initialized in pgtable_cache_init which doesn't have larger than sizeof(void *) << 12 size and that fits into !costly allocation request size. PGALLOC_GFP is used only in radix__pgd_alloc which uses either order-0 or order-4 requests. The first one doesn't need the flag while the second does. Drop __GFP_REPEAT from PGALLOC_GFP and add it for the order-4 one. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-12-git-send-email-mhocko@kernel.orgSigned-off-by: -
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. pte_alloc_one{_kernel} allocate PTE_ORDER which is 0. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-11-git-send-email-mhocko@kernel.orgSigned-off-by: -
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. pmd_alloc_one allocate PMD_ORDER which is 1. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-10-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. pte_alloc_one{_kernel} allocate PTE_ORDER which is 0. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-9-git-send-email-mhocko@kernel.orgSigned-off-by: -
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. pte_alloc_one{_kernel}, pmd_alloc_one allocate PTE_ORDER resp. PMD_ORDER but both are not larger than 1. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-8-git-send-email-mhocko@kernel.orgSigned-off-by: -
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. pte_alloc_one_kernel uses __get_order_pte but this is obviously always zero because BITS_FOR_PTE is not larger than 9 yet the page size is always larger than 4K. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-7-git-send-email-mhocko@kernel.orgSigned-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. {pte,pmd,pud}_alloc_one{_kernel}, late_pgtable_alloc use PGALLOC_GFP for __get_free_page (aka order-0). pgd_alloc is slightly more complex because it allocates from pgd_cache if PGD_SIZE != PAGE_SIZE and PGD_SIZE depends on the configuration (CONFIG_ARM64_VA_BITS, PAGE_SHIFT and CONFIG_PGTABLE_LEVELS). As per config PGTABLE_LEVELS int default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36 default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42 default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48 default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39 default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47 default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48 we should have the following options CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:4k size:4096 pages:1 CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:16k size:16 pages:1 CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:64k size:512 pages:1 CONFIG_ARM64_VA_BITS:47 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:16k size:16384 pages:1 CONFIG_ARM64_VA_BITS:42 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:64k size:65536 pages:1 CONFIG_ARM64_VA_BITS:39 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:4k size:4096 pages:1 CONFIG_ARM64_VA_BITS:36 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:16k size:16384 pages:1 All of them fit into a single page (aka order-0). This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-6-git-send-email-mhocko@kernel.orgSigned-off-by:Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. efi_alloc_page_tables uses __GFP_REPEAT but it allocates an order-0 page. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-4-git-send-email-mhocko@kernel.orgSigned-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Michal Hocko authored
__GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. PGALLOC_GFP uses __GFP_REPEAT but none of the allocation which uses this flag is for more than order-0. This means that this flag has never been actually useful here because it has always been used only for PAGE_ALLOC_COSTLY requests. Link: http://lkml.kernel.org/r/1464599699-30131-3-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Michal Hocko authored
This is the third version of the patchset previously sent [1]. I have basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get rid of superfluous gfp flags" which went through dm tree. I am sending it now because it is tree wide and chances for conflicts are reduced considerably when we want to target rc2. I plan to send the next step and rename the flag and move to a better semantic later during this release cycle so we will have a new semantic ready for 4.8 merge window hopefully. Motivation: While working on something unrelated I've checked the current usage of __GFP_REPEAT in the tree. It seems that a majority of the usage is and always has been bogus because __GFP_REPEAT has always been about costly high order allocations while we are using it for order-0 or very small orders very often. It seems that a big pile of them is just a copy&paste when a code has been adopted from one arch to another. I think it makes some sense to get rid of them because they are just making the semantic more unclear. Please note that GFP_REPEAT is documented as * __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt * _might_ fail. This depends upon the particular VM implementation. while !costly requests have basically nofail semantic. So one could reasonably expect that order-0 request with __GFP_REPEAT will not loop for ever. This is not implemented right now though. I would like to move on with __GFP_REPEAT and define a better semantic for it. $ git grep __GFP_REPEAT origin/master | wc -l 111 $ git grep __GFP_REPEAT | wc -l 36 So we are down to the third after this patch series. The remaining places really seem to be relying on __GFP_REPEAT due to large allocation requests. This still needs some double checking which I will do later after all the simple ones are sorted out. I am touching a lot of arch specific code here and I hope I got it right but as a matter of fact I even didn't compile test for some archs as I do not have cross compiler for them. Patches should be quite trivial to review for stupid compile mistakes though. The tricky parts are usually hidden by macro definitions and thats where I would appreciate help from arch maintainers. [1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org This patch (of 19): __GFP_REPEAT has a rather weak semantic but since it has been introduced around 2.6.12 it has been ignored for low order allocations. Yet we have the full kernel tree with its usage for apparently order-0 allocations. This is really confusing because __GFP_REPEAT is explicitly documented to allow allocation failures which is a weaker semantic than the current order-0 has (basically nofail). Let's simply drop __GFP_REPEAT from those places. This would allow to identify place which really need allocator to retry harder and formulate a more specific semantic for what the flag is supposed to do actually. Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.orgSigned-off-by:
-
Anthony Romano authored
When fallocate is interrupted it will undo a range that extends one byte past its range of allocated pages. This can corrupt an in-use page by zeroing out its first byte. Instead, undo using the inclusive byte range. Fixes: 1635f6a7 ("tmpfs: undo fallocation on failure") Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.comSigned-off-by:
Anthony Romano <anthony.romano@coreos.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Brandon Philips <brandon@ifup.co> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mike Kravetz authored
The write at the end of the test to restore nr_hugepages to its previous value is failing. This is because it is trying to write the number of bytes in the char array as opposed to the number of bytes in the string. Link: http://lkml.kernel.org/r/1465331205-3284-1-git-send-email-mike.kravetz@oracle.comSigned-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Sri Jayaramappa <sjayaram@akamai.com> Cc: Eric B Munson <emunson@akamai.com> Signed-off-by:
-
Tetsuo Handa authored
Since commit 36324a99 ("oom: clear TIF_MEMDIE after oom_reaper managed to unmap the address space") changed to use find_lock_task_mm() for finding a mm_struct to reap, it is guaranteed that mm->mm_users > 0 because find_lock_task_mm() returns a task_struct with ->mm != NULL. Therefore, we can safely use atomic_inc(). Link: http://lkml.kernel.org/r/1465024759-8074-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
-
Tetsuo Handa authored
Commit e2fe1456 ("oom_reaper: close race with exiting task") reduced frequency of needlessly selecting next OOM victim, but was calling mmput_async() when atomic_inc_not_zero() failed. Link: http://lkml.kernel.org/r/1464423365-5555-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
-
- 24 Jun, 2016 10 commits
-
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS fixes from Richard Weinberger: "This contains fixes for two critical bugs in UBI and UBIFS: - fix the possibility of losing data upon a power cut when UBI tries to recover from a write error - fix page migration on UBIFS. It turned out that the default page migration function is not suitable for UBIFS" * tag 'upstream-4.7-rc5' of git://git.infradead.org/linux-ubifs: UBIFS: Implement ->migratepage() mm: Export migrate_page_move_mapping and migrate_page_copy ubi: Make recover_peb power cut aware gpio: make library immune to error pointers gpio: make sure gpiod_to_irq() returns negative on NULL desc gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock -
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is the drm fixes tree for 4.7-rc5. It's a bit larger than normal, due to fixes for production AMD Polaris GPUs. We only merged support for these in 4.7-rc1 so it would be good if we got all the fixes into final. The changes don't hit any other hardware. Other than the amdgpu Polaris changes: - A single fix for atomic modesetting WARN - Nouveau fix for when fbdev is disabled - i915 fixes for FBC on Haswell and displayport regression - Exynos fix for a display panel regression and some other minor changes - Atmel fixes for scaling and OF graph interaction - Allwiinner build, warning and probing fixes - AMD GPU non-polaris fix for num_rbs and some minor fixes Also I've just moved house, and my new place is Internet challenged due to incompetent incumbent ISPs, hopefully sorted out in a couple of weeks, so I might not be too responsive over the next while. It also helps Daniel is on holidays for those couple of weeks as well" * tag 'drm-fixes-for-v4.7-rc5' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx drm/nouveau: fix for disabled fbdev emulation drm/i915/fbc: Disable on HSW by default for now drm/i915: Revert DisplayPort fast link training feature drm/amd/powerplay: enable clock stretch feature for polaris drm/amdgpu/gfx8: update golden setting for polaris10 drm/amd/powerplay: enable avfs feature for polaris drm/amdgpu/atombios: add avfs struct for Polaris10/11 drm/amd/powerplay: add avfs related define for polaris drm/amd/powrplay: enable stutter_mode for polaris. drm/amd/powerplay: disable UVD SMU handshake for MCLK. drm/amd/powerplay: initialize variables which were missed. drm/amd/powerplay: enable PowerContainment feature for polaris10/11. drm/amd/powerplay: need to notify system bios pcie device ready drm/amd/powerplay: fix bug that function parameter was incorect. drm/amd/powerplay: fix logic error. drm: atmel-hlcdc: Fix OF graph parsing drm: atmel-hlcdc: actually disable scaling when no scaling is required drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value drm/amdgpu: precedence bug in amdgpu_device_init() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Here's a small fix for v4.7. This problem was actually introduced in v4.6 when we unified Kconfig, making PCIe support available everywhere including sparc, where config reads into unaligned buffers cause warnings. This fix is from Dave Miller. As a reminder, any future PCI fixes for v4.7 will probably come from Alex Williamson, since I'll be on vacation for most of the rest of this cycle. I should be back about the time the merge window opens" * tag 'pci-v4.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix unaligned accesses in VC code
-
Maarten Lankhorst authored
Atomic updates may acquire more state than initially locked through drm_modeset_lock_crtc, running with heavy stress can cause a WARN_ON(crtc->acquire_ctx) in drm_modeset_lock_crtc: [ 601.491296] ------------[ cut here ]------------ [ 601.491366] WARNING: CPU: 0 PID: 2411 at drivers/gpu/drm/drm_modeset_lock.c:191 drm_modeset_lock_crtc+0xeb/0xf0 [drm] [ 601.491369] Modules linked in: drm i915 drm_kms_helper [ 601.491414] CPU: 0 PID: 2411 Comm: kms_cursor_lega Tainted: G U 4.7.0-rc4-patser+ #4798 [ 601.491417] Hardware name: Intel Corporation Skylake Client [ 601.491420] 0000000000000000 ffff88044d153c98 ffffffff812ead28 0000000000000000 [ 601.491425] 0000000000000000 ffff88044d153cd8 ffffffff810868e6 000000bf58058030 [ 601.491431] ffff880088b415e8 ffff880458058030 ffff88008a271548 ffff88008a271568 [ 601.491436] Call Trace: [ 601.491443] [<ffffffff812ead28>] dump_stack+0x4d/0x65 [ 601.491447] [<ffffffff810868e6>] __warn+0xc6/0xe0 [ 601.491452] [<ffffffff81086968>] warn_slowpath_null+0x18/0x20 [ 601.491472] [<ffffffffc00d4ffb>] drm_modeset_lock_crtc+0xeb/0xf0 [drm] [ 601.491491] [<ffffffffc00c5526>] drm_mode_cursor_common+0x66/0x180 [drm] [ 601.491509] [<ffffffffc00c91cc>] drm_mode_cursor_ioctl+0x3c/0x40 [drm] [ 601.491524] [<ffffffffc00bc94d>] drm_ioctl+0x14d/0x530 [drm] [ 601.491540] [<ffffffffc00c9190>] ? drm_mode_setcrtc+0x520/0x520 [drm] [ 601.491545] [<ffffffff81176aeb>] ? handle_mm_fault+0x106b/0x1430 [ 601.491550] [<ffffffff81108441>] ? stop_one_cpu+0x61/0x70 [ 601.491556] [<ffffffff811bb71d>] do_vfs_ioctl+0x8d/0x570 [ 601.491560] [<ffffffff81290d7e>] ? security_file_ioctl+0x3e/0x60 [ 601.491565] [<ffffffff811bbc74>] SyS_ioctl+0x74/0x80 [ 601.491571] [<ffffffff810e321c>] ? posix_get_monotonic_raw+0xc/0x10 [ 601.491576] [<ffffffff8175b11b>] entry_SYSCALL_64_fastpath+0x13/0x8f [ 601.491581] ---[ end trace 56f3d3d85f000d00 ]--- For good measure, test mode_config.acquire_ctx too, although this should never happen. Testcase: kms_cursor_legacy Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A bit bigger than I would normally like, but most of the large changes are for polaris support and since polaris went upstream in 4.7, I'd like to get the fixes in so it's in good shape when the hw becomes available. The major changes only touch the polaris code so there is little chance for regressions on other asics. The rest are just the usual collection of bug fixes. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: enable clock stretch feature for polaris drm/amdgpu/gfx8: update golden setting for polaris10 drm/amd/powerplay: enable avfs feature for polaris drm/amdgpu/atombios: add avfs struct for Polaris10/11 drm/amd/powerplay: add avfs related define for polaris drm/amd/powrplay: enable stutter_mode for polaris. drm/amd/powerplay: disable UVD SMU handshake for MCLK. drm/amd/powerplay: initialize variables which were missed. drm/amd/powerplay: enable PowerContainment feature for polaris10/11. drm/amd/powerplay: need to notify system bios pcie device ready drm/amd/powerplay: fix bug that function parameter was incorect. drm/amd/powerplay: fix logic error. drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value drm/amdgpu: precedence bug in amdgpu_device_init() drm/amdgpu: fix num_rbs exposed to userspace (v2) drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state()
-
Dave Airlie authored
Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Since HW trigger mode was suppoted we have faced with a issue that Display panel didn't work correctly when trigger mode was changed in booting time. For this, we keep trigger mode with SW trigger mode in default mode like we did before. However, we will need to consider PSR(Panel Self Reflash) mode to resolve this issue fundamentally later. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: use logical AND in exynos_drm_plane_check_size() drm/exynos: remove superfluous inclusions of fbdev header drm/exynos: g2d: drop the _REG postfix from the stride defines drm/exynos: don't use HW trigger for Exynos5420/5422/5800 drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector
-
Dave Airlie authored
Two bug fixes for the atmel-hlcdc driver. * tag 'drm-atmel-hlcdc-fixes/for-4.7-rc5' of github.com:bbrezillon/linux-at91: drm: atmel-hlcdc: Fix OF graph parsing drm: atmel-hlcdc: actually disable scaling when no scaling is required
-
Dave Airlie authored
Merge tag 'sunxi-drm-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes Allwinner sun4i DRM driver fixes A bunch of fixes that address: - Compilation errors in various corner cases - Move to helpers - Fix the pixel clock computation - Fix our panel probe * tag 'sunxi-drm-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm: sun4i: do cleanup if RGB output init fails drm/sun4i: Convert to connector register helpers drm/sun4i: remove simplefb at probe drm/sun4i: rgb: panel is an error pointer drm/sun4i: defer only if we didn't find our panel drm/sun4i: rgb: Validate the clock rate drm/sun4i: request exact rates to our parents drm: sun4i: fix probe error handling drm: sun4i: print DMA address correctly drm/sun4i: add COMMON_CLK dependency
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Hi Dave, just a couple of display fixes, both stable stuff. Maybe we'll be able to enable fbc by default one day. * tag 'drm-intel-fixes-2016-06-22' of git://anongit.freedesktop.org/drm-intel: drm/i915/fbc: Disable on HSW by default for now drm/i915: Revert DisplayPort fast link training feature
-
git://github.com/skeggsb/linuxDave Airlie authored
* 'linux-4.7' of git://github.com/skeggsb/linux: drm/nouveau: fix for disabled fbdev emulation
-
- 23 Jun, 2016 3 commits
-
-
Dmitrii Tcvetkov authored
Hello, after this commit: commit f045f459 Author: Ben Skeggs <bskeggs@redhat.com> Date: Thu Jun 2 12:23:31 2016 +1000 drm/nouveau/fbcon: fix out-of-bounds memory accesses kernel started to oops when loading nouveau module when using GTX 780 Ti video adapter. This patch fixes the problem. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591Signed-off-by:
Dmitrii Tcvetkov <demfloro@demfloro.ru> Suggested-by:
Ilia Mirkin <imirkin@alum.mit.edu> Fixes: f045f459 ("nouveau_fbcon_init()") Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
Linus Torvalds authored
None of the code actually wants a thread_info, it all wants a task_struct, and it's just converting to a thread_info pointer much too early. No semantic change. Signed-off-by: -
Linus Torvalds authored
None of the code actually wants a thread_info, it all wants a task_struct, and it's just converting back and forth between the two ("ti->task" to get the task_struct from the thread_info, and "task_thread_info(task)" to go the other way). No semantic change. Acked-by:Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
