- 12 Oct, 2008 40 commits
-
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Julia Lawall authored
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Felipe Balbi authored
This driver sure needs some rework. For now, let's try to clean it up a bit before start reimplementing anything. checkpatch.pl still not happy with this driver after this patch, but the most annoying errors are gone, comments now use C-style only, labels are well placed and some other minor fixes. Some more clean up patches will come as I work on this driver. Please review it carefully. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Henk Vergonet <henk.vergonet@gmail.com> [mchehab@infradead.org: Manually fixed some conflicts with a previous patch] Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This driver is for VERY old i2c-over-parallel port teletext receiver boxes. Rather then spending effort on converting this driver to V4L2, and since it is extremely unlikely that anyone still uses one of these devices, it was decided to drop it (after discussing this as well with the original author, Phil Blundell). Signed-off-by:
Phil Blundell <philb@gnu.org> Signed-off-by:
-
Hans Verkuil authored
Old driver for the dpc7146 demonstration board that is no longer relevant. The last time this was tested on actual hardware was probably around 2002. Since this is a driver for a demonstration board the decision was made (after discussing this with the original author, Michael Hunold) to remove it rather than spending a lot of effort continually updating this driver to stay in sync with the latest internal V4L2 or I2C API. Signed-off-by:
Michael Hunold <hunold@linuxtv.org> Signed-off-by:
-
Stefan Herbrechtsmeier authored
Make .power and .reset callbacks per camera instead of per host, also move their invocation to camera drivers. .arch/arm/mach-pxa/include/mach/camera.h | 2 - Signed-off-by:
Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Fix a typo in Kconfig, simplify error checking, further minor cleanup. Tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Guennadi Liakhovetski <g.iakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
i2c_smbus_write_word_data() returns 0 or a negative error, hence no need to check for "> 0". Signed-off-by:
-
Robert Jarzmik authored
Adds support for Micron MT9M111 camera chip, with basic features : - view rectangle configurable - some output formats (bayer8, bayer10, rgb565, rgb555, ycbycr) - autoexposure - only highpower mode context used (ie. context B) create mode 100644 drivers/media/video/mt9m111.c Signed-off-by:
-
Robert Jarzmik authored
Signed-off-by:
-
Alexander Beregalov authored
drivers/media/video/saa7134/saa7134-core.c:366: warning: 'saa7134_buffer_requeue' defined but not used Signed-off-by:
Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by:
-
Michael Krufky authored
Fix the following build warnings: lgs8gl5.c: In function 'lgs8gl5_read_reg': lgs8gl5.c:95: warning: unused variable 'j' lgs8gl5.c: In function 'lgs8gl5_update_alt_reg': lgs8gl5.c:135: warning: unused variable 'j' lgs8gl5.c: In function 'lgs8gl5_read_ber': lgs8gl5.c:300: warning: unused variable 'state' lgs8gl5.c: In function 'lgs8gl5_read_ucblocks': lgs8gl5.c:332: warning: unused variable 'state' lgs8gl5.c: At top level: lgs8gl5.c:181: warning: 'lgs8gl5_set_inversion' defined but not used Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Timothy Lee authored
Add support for Magic-Pro DMB-TH usb stick. DMB-TH is the HDTV broadcast standard used in Hong Kong and China. [...] I've also attached a second patch against the dvb-apps repository which adds a DMB-TH scan file for Hong Kong. Since the ProHDTV stick contains a DMB-TH decoder (lgs8gl5) onboard, it outputs MPEG-TS to the PC. Signed-off-by:
Timothy Lee <timothy.lee@siriushk.com> Signed-off-by:
-
Michael Krufky authored
Allow dvb-usb-cxusb to be built without dib7000p or dib0070 selected Signed-off-by:
-
Michael Krufky authored
Fix the following checkpatch.pl errors and warnings: ERROR: do not use assignment in if condition 117: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:819: + if ((adap->fe = dvb_attach(dib7000p_attach, ERROR: switch and case should be at the same indent 155: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:857: + switch (band) { + case BAND_VHF: offset = 950; break; + case BAND_UHF: + default: offset = 550; break; WARNING: line over 80 characters 169: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:871: + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); WARNING: line over 80 characters 213: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:1342: +static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { WARNING: line over 80 characters 226: FILE: linux/drivers/media/dvb/dvb-usb/cxusb.c:1355: + .size_of_priv = sizeof(struct dib0700_adapter_state), total: 2 errors, 3 warnings, 266 lines checked Signed-off-by: -
Anton Blanchard authored
Add support for revision 2 of the DViCO FusionHDTV DVB-T Dual Digital 4 which has new tuners and demodulators (2 x DIB7070p). With this patch both DVB reception and IR works. The dib7000p driver currently hardwires the output mode to OUTMODE_MPEG2_SERIAL regardless of what we ask for. Modify it to allow OUTMODE_MPEG2_PAR_GATED_CLK to be set. Longer term we should remove the check completely and set the output mode correctly in all the callers. Add Kconfig bits to ensure the dib7000p and dib0070 modules are enabled. It would be nice to only do this for the !DVB_FE_CUSTOMISE case, but this is what the other DIB7070 module does (there are a number of module dependencies in the attach code). Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Hans Verkuil authored
If you can select AAC as audio encoder, then you should also be able to set the bitrate. Add this missing control. Signed-off-by:
-
Steven Toth authored
Code reduction. Tuner callback now assumes that tsport is passed as the void arg. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Steven Toth authored
From Chris Pascoe <c.pascoe@itee.uq.edu.au> Support IR remote on FusionHDTV DVB-T Dual Express Signed-off-by:
-
Steven Toth authored
Add support for the DViCO FusionHDTV DVB-T Dual Express card, based on work by Chris Pascoe and Stephen Backway. Signed-off-by:
-
Steven Toth authored
The Hauppauge HVR1400 and HVR1500 can now use the common cx23885 tuner callback. Signed-off-by:
-
Steven Toth authored
Tuners currently hook different things to the private pointer in their callback function. Longer term we should make that private pointer consistent, but for now separate out the guts of the cx23885 tuner callback so we can reuse it. Signed-off-by:
-
Hans Verkuil authored
- add PCI dependency for btcx - fix compile errors (doesn't like ';' at the end of a #if 0) Signed-off-by:
-
Hans Verkuil authored
The PMT table for AC3 audio is different. Thanks to Dmitry Belimov for providing the table data. Signed-off-by:
-
Hans Verkuil authored
Cleaned up the saa6752hs i2c driver. Add AC-3 support. Add VIDIOC_CHIP_IDENT support. Signed-off-by:
-
Hans Verkuil authored
v4l2_ctrl_query_menu_valid_items() makes it easy to handle control menus that have a lot of invalid 'holes'. For example, many MPEG encoders only support a limited subset of audio bitrates. In that case a driver can specify an array listing the set of valid bitrates and pass that to this function. Signed-off-by:
-
Hans Verkuil authored
Add function that returns the control name. Allows this to be used in places where the normal v4l2_ctrl_query_fill() function cannot be used (e.g. uvc). Signed-off-by:
-
Hans Verkuil authored
Some models of the saa6752hs support AC-3. Extend the API with the necessary controls for AC-3. Signed-off-by:
-
Janne Grunau authored
Adds Advanced Audio Coding (AAC) and MPEG-4 Advanced Video Coding (AVC/H.264) as audio/video codecs to the extended controls API. Updates cx2341x driver to the new values. Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by:
Gilberto <gilberto@sistemafenix.com.br> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Removes duplicated #include <v4l2-ioctl.h> Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch adds the capability of decoding NEC protocol, received via GPIO18 line. This GPIO port can trigger saa7134 IRQ. A future improvement would be to make it a little more generic to work also with GPIO16 line. A pure IRQ code didn't work, since some delays were introduced on the tests we did. A possible approach would be to use polling at a rate of 2.5 ms or less. If a new code were taken, a code similar to nec_task() could be used. However, this would add an extra overhead to kernel, and will consume more power. Due to that, we took an hybrid approach: an IRQ upper half to trigger when a new key is received and a bottom half to convert pulse-distance into a keycode. The bottom half is polling based, to improve performance. During the bottom half proccess, GPIO18 IRQ line is disabled, preventing IRQ reentrancy and improving performance a little bit. Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by:
-
Hans Verkuil authored
The BKL is now moved from the video_open function in v4l2-dev.c to the various drivers. It seems about a third of the drivers already has a lock of some sort protecting the open(), another third uses video_exclusive_open (yuck!) and the last third required adding the BKL in their open function. Signed-off-by:
-
Adrian Bunk authored
ivtv_claim_stream() can now become static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
