- 11 Aug, 2010 4 commits
-
-
J. R. Okajima authored
By the commit af7fa165 2010-08-03 NFS: Fix up the fsync code close(2) became returning the non-zero value even if it went well. nfs_file_fsync() should return 0 when "status" is positive. Signed-off-by:
J. R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Tom Tucker authored
This patch updates the computation to include the worst case situation where three FRMR are required to map a single RPC REQ. Signed-off-by:
Tom Tucker <tom@ogc.us> Signed-off-by:
-
Steve Wise authored
A bad cast causes the iova_start, which in this case is a 64b DMA bus address, to be truncated on 32b systems. This breaks frmrs on 32b systems. No cast is needed. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Davidlohr Bueso authored
Signed-off-by:
Davidlohr Bueso <dave@gnu.org> Signed-off-by:
-
- 10 Aug, 2010 36 commits
-
-
Patrick J. LoPresti authored
Running "cat /proc/mounts" fails to display the "lookupcache" option. This oversight cost me a bunch of wasted time recently. The following simple patch fixes it. CC: stable <stable@kernel.org> Signed-off-by:
Patrick LoPresti <lopresti@gmail.com> Signed-off-by:
-
Neil Brown authored
To obey NFS cache semantics, the client must verify the cached attributes when a file is opened. In most cases this is done by a call to d_validate as one of the last steps in path_walk. However for the root of a filesystem, d_validate is only ever called on the mounted-on filesystem (except when the path ends '.' or '..'). So NFS has no chance to validate the attributes. So, in nfs_opendir, we revalidate the attributes if the opened directory is the mountpoint. This may cause double-validation for "." and ".." lookups, but that is better than missing regular /path/name lookups completely. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Andy Chittenden authored
When reusing a TCP connection, ensure that it's aborted if a previous shutdown attempt has been made on that connection so that the RPC over TCP recovery mechanism succeeds. Signed-off-by:
Andy Chittenden <andyc.bluearc@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (59 commits) igbvf.txt: Add igbvf Documentation igb.txt: Add igb documentation e100/e1000*/igb*/ixgb*: Add missing read memory barrier ixgbe: fix build error with FCOE_CONFIG without DCB_CONFIG netxen: protect tx timeout recovery by rtnl lock isdn: gigaset: use after free isdn: gigaset: add missing unlock solos-pci: Fix race condition in tasklet RX handling pkt_sched: Fix sch_sfq vs tcf_bind_filter oops net: disable preemption before call smp_processor_id() tcp: no md5sig option size check bug iwlwifi: fix locking assertions iwlwifi: fix TX tracer isdn: fix information leak net: Fix napi_gro_frags vs netpoll path usbnet: remove noisy and hardly useful printk rtl8180: avoid potential NULL deref in rtl8180_beacon_work ath9k: Remove myself from the MAINTAINERS list libertas: scan before assocation if no BSSID was given libertas: fix association with some APs by using extended rates ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: tx493xide: use min_t() macro instead of min() drivers/ide: Use memdup_user via82cxxx: fix typo for VT6415 PCIE PATA IDE Host Controller support. ide-cd: Do not access completed requests in the irq handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Update defconfig. sparc: Kill user copy check code. sparc64: Fix perf_arch_get_caller_regs(). sparc64: Add missing ID to parport probing code.
-
git://www.jni.nu/crisLinus Torvalds authored
* 'rs485fix' of git://www.jni.nu/cris: CRIS: ioctl for getting RS485 information
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: fix build with make 3.82 Revert "Input: appletouch - fix integer overflow issue" memblock: Fix memblock_is_region_reserved() to return a boolean powerpc: Trim defconfigs powerpc: fix i8042 module build error sound/soc: mpc5200_psc_ac97: Use gpio pins for cold reset powerpc/5200: add mpc5200_psc_ac97_gpio_reset
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfinLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (32 commits) Blackfin: gpio: add a debounce stub Blackfin: update defconfigs Blackfin: remove CONFIG_MEM_GENERIC_BOARD Blackfin: dpmc: punt unnecessary RTC_ISTAT clearing Blackfin: unify rotary encoder bitmasks Blackfin: unify SDH/RSI bitmasks Blackfin: BF54x: tweak DMAC MMR naming to match other ports Blackfin: TWI: clean up the MMR names Blackfin: add EVT_OVERRIDE/IPRIO core MMR helpers Blackfin: add support for dynamic ftrace Blackfin: add support for LZO compressed kernels Blackfin: portmux: fix peripheral map overflow when requesting pins Blackfin: document SPI CS limitations with CPHA=0 Blackfin: remove useless and outdated documentation Blackfin: BF51x/BF52x: support GPIO Hysteresis/Schmitt Trigger options Blackfin: gpio/portmux: clean up whitespace corruption Blackfin: make sure mmiowb inserts a write barrier with SSYNC Blackfin: fix DMA/cache bug when resuming from suspend to RAM Blackfin: BF51x: fix handling of PH8 (the "internal" SPI0SEL4 pin) Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_txLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits) DMAENGINE: at_hdmac: locking fixlet DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l dma: dmatest: fix potential sign bug ioat2: catch and recover from broken vtd configurations v6 DMAENGINE: add runtime slave control to COH 901 318 v3 DMAENGINE: add runtime slave config to DMA40 v3 DMAENGINE: generic slave channel control v3 dmaengine: Driver for Topcliff PCH DMA controller intel_mid: Add Mrst & Mfld DMA Drivers drivers/dma: Eliminate a NULL pointer dereference dma/timb_dma: compile warning on 32 bit DMAENGINE: ste_dma40: support older silicon DMAENGINE: ste_dma40: support disabling physical channels DMAENGINE: ste_dma40: no disabled phy channels on ux500 DMAENGINE: ste_dma40: fix suspend bug DMAENGINE: ste_dma40: add DB8500 memcpy channels DMAENGINE: ste_dma40: no flow control on memcpy DMAENGINE: ste_dma40: arch updates for LCLA and LCPA DMAENGINE: ste_dma40: allocate LCLA dynamically DMAENGINE: ste_dma40: no premature stop ... Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c
-
qiaochong authored
According include/linux/console_struct.h,vc_scr_end is unsigned long. struct vc_data { unsigned short vc_num; /* Console number */ unsigned int vc_cols; /* [#] Console size */ unsigned int vc_rows; unsigned int vc_size_row; /* Bytes per row */ unsigned int vc_scan_lines; /* # of scan lines */ unsigned long vc_origin; /* [!] Start of real screen */ unsigned long vc_scr_end; /* [!] End of real screen */ unsigned long vc_visible_origin; /* [!] Top of visible window */ unsigned int vc_top, vc_bottom; /* Scrolling region */ const struct consw *vc_sw; unsigned short *vc_screenbuf; ... } Signed-off-by:qiaochong <qiaochong@loongson.cn> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
qiaochong authored
kernel will die on some platform when switch from vga mode to framebuffer mode. The reason of this bug is that bind_con_driver reset vc->vc_origin to (unsigned long)vc->vc_screenbuf. On vgacon vc->vc_origin is not releated to vc->vc_screenbuf,if set vc->vc_origin to vc->vc_screenbuf,kernel will die on vc_do_resize. static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, struct vc_data *vc, unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned int old_cols, old_rows, old_row_size, old_screen_size; unsigned int new_cols, new_rows, new_row_size, new_screen_size; unsigned int end, user; ... end = (old_rows > new_rows) ? old_origin + (old_row_size * new_rows) : vc->vc_scr_end; ... /* here for a test from vgacon to framebuffer: old_origin=0x810814a0,end=0xb00b8fa0,vc->vc_origin=0x810814a0 the code bellow will copy memory from 0x810814a0 to 0xb00b8fa0, this will cover kernel code,kernel died here. */ while (old_origin < end) { scr_memcpyw((unsigned short *) new_origin, (unsigned short *) old_origin, rlth); if (rrem) scr_memsetw((void *)(new_origin + rlth), vc->vc_video_erase_char, rrem); old_origin += old_row_size; new_origin += new_row_size; } ... } [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: -
Michel Lespinasse authored
More code can be pushed from rwsem_down_read_failed and rwsem_down_write_failed into rwsem_down_failed_common. Following change adding down_read_critical infrastructure support also enjoys having flags available in a register rather than having to fish it out in the struct rwsem_waiter... Signed-off-by:
Michel Lespinasse <walken@google.com> Acked-by:
David Howells <dhowells@redhat.com> Cc: Mike Waychison <mikew@google.com> Cc: Suleiman Souhlal <suleiman@google.com> Cc: Ying Han <yinghan@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Michel Lespinasse authored
This change addresses the following situation: - Thread A acquires the rwsem for read - Thread B tries to acquire the rwsem for write, notices there is already an active owner for the rwsem. - Thread C tries to acquire the rwsem for read, notices that thread B already tried to acquire it. - Thread C grabs the spinlock and queues itself on the wait queue. - Thread B grabs the spinlock and queues itself behind C. At this point A is the only remaining active owner on the rwsem. In this situation thread B could notice that it was the last active writer on the rwsem, and decide to wake C to let it proceed in parallel with A since they both only want the rwsem for read. Signed-off-by:
-
Michel Lespinasse authored
Previously each waiting thread added a bias of RWSEM_WAITING_BIAS. With this change, the bias is added only once to indicate that the wait list is non-empty. This has a few nice properties which will be used in following changes: - when the spinlock is held and the waiter list is known to be non-empty, count < RWSEM_WAITING_BIAS <=> there is an active writer on that sem - count == RWSEM_WAITING_BIAS <=> there are waiting threads and no active readers/writers on that sem Signed-off-by: -
Michel Lespinasse authored
In __rwsem_do_wake(), we can skip the active count check unless we come there from up_xxxx(). Also when checking the active count, it is not actually necessary to increment it; this allows us to get rid of the read side undo code and simplify the calculation of the final rwsem count adjustment once we've counted the reader threads to wake. The basic observation is the following. When there are waiter threads on a rwsem and the spinlock is held, other threads can only increment the active count by trying to grab the rwsem in down_xxxx(). However down_xxxx() will notice there are waiter threads and take the down_failed path, blocking to acquire the spinlock on the way there. Therefore, a thread observing an active count of zero with waiters queued and the spinlock held, is protected against other threads acquiring the rwsem until it wakes the last waiter or releases the spinlock. Signed-off-by:
-
Michel Lespinasse authored
This is in preparation for later changes in the series. In __rwsem_do_wake(), the first queued waiter is checked first in order to determine whether it's a writer or a reader. The code paths diverge at this point. The code that checks and increments the rwsem active count is duplicated on both sides - the point is that later changes in the series will be able to independently modify both sides. Signed-off-by:
-
Giel van Schijndel authored
Allow device probing to recognise the Fintek F71808E. Sysfs interface: * Fan/pwm control is the same as for F71889FG * Temperature and voltage sensor handling is largely the same as for the F71889FG - Has one temperature sensor less (doesn't have temp3) - Misses one voltage sensor (doesn't have V6, thus in6_input refers to what in7_input refers for F71889FG) For the purpose of the sysfs interface fxxxx_in_temp_attr[] is split up such that it can largely be reused. Signed-off-by:Giel van Schijndel <me@mortis.eu> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Andrew Morton authored
register_hotcpu_notifier() is designed to make these ifdefs unnecessary. Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Chen Gong authored
Update coretemp supported CPU TjMax lists and some cleanup work. Signed-off-by:
Chen Gong <gong.chen@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Huaxu Wan <huaxu.wan@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by:
-
Chen Gong authored
If one coretemp device can't be added, it should allow subsequent adding operation because every new-added device will create a new sysfs group, not an additional sensor sys entry. Signed-off-by:
-
Chen Gong authored
Fix two errors in hotplug. One is for hotplug notifier. The other is unnecessary driver unregister. Because even none of online cpus supports coretemp, we can't assume new onlined cpu doesn't support it either. If related driver is unregistered there we have no chance to use coretemp from then on. Signed-off-by:
-
Guenter Roeck authored
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Guenter Roeck authored
This driver adds support for the monitoring features of the Summit Microelectronics SMM665 Six-Channel Active DC Output Controller/Monitor. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Kalhan Trisal authored
This driver will report the heading values in degrees to the sysfs interface. The values returned are headings . e.g. 245.6 Alan: Cleanups requested now all folded in and a sysfs description to keep Andrew happy. The sysfs description now resembles hwmon. Signed-off-by:
Kalhan Trisal <kalhan.trisal@intel.com> Reviewed-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Alan Cox <alan@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Ritesh Raj Sarraf authored
Add Lenovo Thinkpad T400. I have done the testing on my laptop. The hdaps module detects the device and the hdapsd daemon is able to [un]park the disk. Signed-off-by:
Ritesh Raj Sarraf <rrs@debian.org> Cc: Frank Seidel <frank@f-seidel.de> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Patrick Pannuto authored
These are caused by checkpatch incorrectly parsing its internal representation of a statement block for struct's (or anything else that is a statement block encapsulated in {}'s that also ends with a ';'). Fix this by properly parsing a statement block. An example: +struct dummy_type dummy = { + .foo = "baz", +}; +EXPORT_SYMBOL_GPL(dummy); + +static int dummy_func(void) +{ + return -EDUMMYCODE; +} +EXPORT_SYMBOL_GPL(dummy_func); WARNING: EXPORT_SYMBOL(foo); should immediately \ follow its function/variable #19: FILE: dummy.c:4: +EXPORT_SYMBOL_GPL(dummy); The above warning is issued when it should not be. Signed-off-by:Patrick Pannuto <ppannuto@codeaurora.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Patrick Pannuto authored
As explained in Documentation/timers/timers-howto.txt, msleep's of < 20ms may sleep for as long as 20ms. Caller's of msleep(1) or msleep(2), etc are likely not to expect this quirky behavior - warn them. Signed-off-by:
-
Patrick Pannuto authored
When possible, sleeping is (usually) better than delaying; however, don't bother callers of udelay < 10us, as those cases are generally not worth the switch to usleep [akpm@linux-foundation.org: fix mismatched parentheses] Signed-off-by:
-
Joe Perches authored
Add new logging functions netdev_<level> and netif_<level>. Don't complain if the only thing on a line is a quoted string. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Joe Eloff authored
Make error message say 'ERROR: do not initialise globals to 0 or NULL' rather than 'ERROR: do not initialise externals to 0 or NULL'. Makes more sense in the context since there is an extern keyword in C and that is a global declaration within the scope of the current file. Signed-off-by:
Joe Eloff <kagen101@gmail.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Raffaele Recalcati authored
I've got a false positive when spaces are present at the beginning of a line. So I add this check, obviously excluding to check the lines in the middle of comments. For instance this code passes the checkpatch test: +struct davinci_mcbsp_data { + unsigned int fmt; + int clk_div; +}; + +static struct davinci_mcbsp_data mcbsp_data; Where, before the string "int clk_div", I have 4 spaces (\040 ascii character). With v2.6.34 scripts/checkpatch.pl script I get: scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch total: 0 errors, 0 warnings, 201 lines checked 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch has no obvious style problems and is ready for submission. That is not correct. Instead with the proposed patch I get: scripts/checkpatch.pl 0001-ASoC-DaVinci-Added-support-for-stereo-I2S.patch WARNING: please, no space for starting a line, excluding comments #63: FILE: sound/soc/davinci/davinci-i2s.c:165: + int clk_div;$ WARNING: please, no space for starting a line, excluding comments #95: FILE: sound/soc/davinci/davinci-i2s.c:406: + return 0;$ total: 0 errors, 2 warnings, 201 lines checked That is correct. Signed-off-by:Raffaele Recalcati <raffaele.recalcati@bticino.it> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Wolfram Sang authored
Change the check suggesting replacement of asm-includes with linux-includes. Exceptions to this rule are easier to extend now. Add memory.h because ARM has a custom one. Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Axel Lin authored
The error may happen at any iteration of the for loop, this patch properly unregisters already registed edd_devices in error path. [akpm@linux-foundation.org: remove unneeded NULL test] Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Eric Paris authored
Getting and putting arrays of pointers with flex arrays is a PITA. You have to remember to pass &ptr to the _put and you have to do weird and wacky casting to get the ptr back from the _get. Add two functions flex_array_get_ptr() and flex_array_put_ptr() to handle all of the magic. [akpm@linux-foundation.org: simplification suggested by Joe] Signed-off-by:
Eric Paris <eparis@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Joe Perches <joe@perches.com> Cc: James Morris <jmorris@namei.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Michal Nazarewicz authored
The strict_strtoul() and strict_strtoull() functions used strlen() to check argument's length in a situation where it wasn't strictly necessary Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Cc: "Yi Yang" <yi.y.yang@intel.com> Signed-off-by:
-
