- 26 Mar, 2019 6 commits
-
-
Lucas De Marchi authored
Now that pll_id is not used anymore for combophy, reduce its scope. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322223751.22089-6-lucas.demarchi@intel.comReviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Lucas De Marchi authored
By the time icl_ddi_clock_get() is called we've just got the hw state from the pll registers. We don't need to read them again: we can rather reuse what was cached in the dpll_hw_state. While at it, s/refclk/ref_clock/ just to be consistent with the name used in code nearby. Signed-off-by:
-
Lucas De Marchi authored
By the time cnl_ddi_clock_get() is called we've just got the hw state from the pll registers. We don't need to read them again: we can rather reuse what was cached in the dpll_hw_state. This also affects the code for ICL since it partially reuses the CNL code. However the more intricate part on ICL is left for another patch. Signed-off-by:
-
Lucas De Marchi authored
Rename state to pll_state and use it as the argument to bxt_calc_pll_link(), similar to how it's done in the skl variant. The WARN_ON(!crtc_state->shared_dpll) is not very useful, so remove it as well. Signed-off-by:
-
Lucas De Marchi authored
By the time skl_ddi_clock_get() is called - and thus skl_calc_wrpll_link() - we've just got the hw state from the pll registers. We don't need to read them again: we can rather reuse what was cached in the dpll_hw_state. v2: rename state variable to pll_state, make argument const in skl_calc_wrpll_link() and remove not useful warning (from Ville) Signed-off-by: -
Dan Carpenter authored
The live_context() function returns error pointers. It never returns NULL. Fixes: 9c1477e8 ("drm/i915/selftests: Exercise adding requests to a full GGTT") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam
-
- 25 Mar, 2019 6 commits
-
-
Daniele Ceraolo Spurio authored
We're already updating the engine_mask to reflect what's in the HW, so we can just get the info from there. A couple of macros have been added to facilitate this. v2: Appease checkpatch Suggested-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Jani Nikula authored
Iterate over child devices instead of ports in parse_ddi_ports() to initialize ddi_port_info. We'll eventually need to decide some stuff based on the child device order, which may be different from the port order. As a bonus, this allows better abstractions for e.g. dvo port mapping. There's a subtle change in the DDC pin and AUX channel sanitization as we change the order. Otherwise, this should not change behaviour. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322121008.4456-1-jani.nikula@intel.com
-
Chris Wilson authored
Fixup the errno as we adjusted the error path to receive the errno and not compute it itself from ERR_PTR(ctx) anymore. drivers/gpu/drm/i915/i915_gem_context.c:793 i915_gem_context_open() warn: passing a valid pointer to 'PTR_ERR' Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325090413.19906-2-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
The vblank timestamp->counter guesstimator seems to be working sufficiently well, so there's no reason not to disable vblank interrupts ASAP even on gen2. Signed-off-by:
-
Ville Syrjälä authored
The AGPBUSY thing doesn't work on i945gm anymore. This means the gmch is incapable of waking the CPU from C3 when an interrupt is generated. The interrupts just get postponed indefinitely until something wakes up the CPU. This is rather annoying for vblank interrupts as we are unable to maintain a steady framerate unless the machine is sufficiently loaded to stay out of C3. To combat this let's use pm_qos to prevent C3 whenever vblank interrupts are enabled. To maintain reasonable amount of powersaving we will attempt to limit this to C3 only while leaving C1 and C2 enabled. v2: Use READ_ONCE() (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30364Signed-off-by:
-
Ville Syrjälä authored
If I'm reading the spec right AML 0x87CA is a Y SKU, so it should be marked as ULX in our old style terminology. Cc: stable@vger.kernel.org Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: c0c46ca4 ("drm/i915/aml: Add new Amber Lake PCI ID") Signed-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
- 24 Mar, 2019 3 commits
-
-
Chris Wilson authored
Since commit b7137e0c ("drm/i915: Defer enabling rc6 til after we submit the first batch/context"), intel_suspend_gt_powersave() has been a no-op. As we still do not need to do anything explicitly on suspend (we do everything required on idling), remove the defunct function. References: b7137e0c ("drm/i915: Defer enabling rc6 til after we submit the first batch/context") Suggested-by:
"Hiatt, Don" <don.hiatt@intel.com> Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190323214009.23294-1-chris@chris-wilson.co.uk
-
Michal Wajdeczko authored
GuC may send notification messages with payload larger than single u32. Prepare driver to accept longer messages. Signed-off-by:
-
Zhenyu Wang authored
Initially found issue with closed context debug check when pin hw_id for GVT context, looks we should always pin hw_id for that as GVT context is fixed for each vGPU life cycle, and we'd also like to get pinned hw_id e.g for perf reason, etc. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
- 22 Mar, 2019 20 commits
-
-
Anusha Srivatsa authored
EHL uses the same firmware as ICL. Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
-
Bob Paauwe authored
EHL has a different number of subslices. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Bob Paauwe authored
Configure the correct set of outputs for EHL. EHL has three DDI's plus DSI. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Elkhart Lake has a different set of PLLs as compared to Ice Lake, although programming them is very similar. v2: Rebase on top of s/icl_pll_funcs/combo_pll_funcs Signed-off-by:
-
Bob Paauwe authored
Add ElkhartLake as a unique platform as there are some differences between it and Icelake. Signed-off-by:
-
James Ausmus authored
Add known EHL PCI IDs. v2 (Rodrigo): Removed x86 early quirk. To be sent in a separated patch cc'ing the appropriated list and maintainers for proper ack. v3: (Rodrigo): - Removed .num_pipes = 3 that is coming since GEN&_FEATURES. - Added ppgtt type and size after rework from Bob and Chris v4: (Rodrigo): - remove ppgtt type added on v3. Jose pointed it is not needed. Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:James Ausmus <james.ausmus@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Rename intel_find_panel_downclock() to intel_panel_edid_downclock_mode() to make it clear it's looking for the downclock mode in the EDID. And while at it polish the implementation a bit as well. Signed-off-by:
-
Ville Syrjälä authored
Utilize drm_mode_match() instead of hand rolling it when looking for the DRRS downclock mode. Signed-off-by:
-
Ville Syrjälä authored
DSI has its own convoluted way of grabbing the fixed mode from the VBT. Change it to follow the path laid out by LVDS/eDP. Signed-off-by:
-
Ville Syrjälä authored
LVDS and eDP have essentially the same code for grabbing the fixed mode from VBT. Pull that code to a common location. Signed-off-by:
-
Ville Syrjälä authored
Some monitors apparently forget to mark any mode as preferred in the EDID. In this particular case we have a very generic looking ID "PNP Model 0 Serial Number 4" / "LVDS 800x600" so a specific quirk doesn't seem particularly wise. Also the quirk we have (EDID_QUIRK_FIRST_DETAILED_PREFERRED) is actually defunct so we'd have to fix it first. When there is no preferred mode we currently fall back to the VBT. That approach fails us here as the VBT mode is 1024x768 whereas the panel resolution is 800x600. So instead of falling back to the VBT when there is no preferred mode let's just pick the first probed mode. Only if the EDID provided no modes we fall back to the VBT. For this machine the VBIOS would appear to select the 800x600 60Hz EST mode rather than the first detailed mode (which is the new fallback will pick). The two modes differ only by having opposite sync polarities, which does not seem to matter to the panel in question. v2: Make sure the probed_modes list is not empty Cc: Adam Jackson <ajax@redhat.com> Cc: Roberto Viola <cagnulein@gmail.com> Tested-by:
Roberto Viola <cagnulein@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109780Signed-off-by:
Adam Jackson <ajax@redhat.com> Acked-by:
-
Ville Syrjälä authored
Both LVDS and eDP have the same code to look up the preferred mode from the connector probed_modes list. Move the code to a common location. Signed-off-by:
-
Ville Syrjälä authored
I added the loop but neglected to actually pass the level to the function. So we were just looping 8 times calculating the exact same thing every time. Fixes: df331de3 ("drm/i915: Allocate enough DDB for the cursor") Signed-off-by:
-
Chris Wilson authored
Previously, our view has been always to run the engines independently within a context. (Multiple engines happened before we had contexts and timelines, so they always operated independently and that behaviour persisted into contexts.) However, at the user level the context often represents a single timeline (e.g. GL contexts) and userspace must ensure that the individual engines are serialised to present that ordering to the client (or forgot about this detail entirely and hope no one notices - a fair ploy if the client can only directly control one engine themselves ;) In the next patch, we will want to construct a set of engines that operate as one, that have a single timeline interwoven between them, to present a single virtual engine to the user. (They submit to the virtual engine, then we decide which engine to execute on based.) To that end, we want to be able to create contexts which have a single timeline (fence context) shared between all engines, rather than multiple timelines. v2: Move the specialised timeline ordering to its own function. Signed-off-by:
-
Chris Wilson authored
It can be useful to have a single ioctl to create a context with all the initial parameters instead of a series of create + setparam + setparam ioctls. This extension to create context allows any of the parameters to be passed in as a linked list to be applied to the newly constructed context. v2: Make a local copy of user setparam (Tvrtko) v3: Use flags to detect availability of extension interface Signed-off-by:
-
Chris Wilson authored
In preparation to making the ppGTT binding for a context explicit (to facilitate reusing the same ppGTT between different contexts), allow the user to create and destroy named ppGTT. v2: Replace global barrier for swapping over the ppgtt and tlbs with a local context barrier (Tvrtko) v3: serialise with struct_mutex; it's lazy but required dammit v4: Rewrite igt_ctx_shared_exec to be more different (aimed to be more similarly, turned out different!) v5: Fix up test unwind for aliasing-ppgtt (snb) v6: Tighten language for uapi struct drm_i915_gem_vm_control. v7: Patch the context image for runtime ppgtt switching! Testcase: igt/gem_vm_create Testcase: igt/gem_ctx_param/vm Testcase: igt/gem_ctx_clone/vm Testcase: igt/gem_ctx_shared Signed-off-by:
-
Chris Wilson authored
An idea for extending uABI inspired by Vulkan's extension chains. Instead of expanding the data struct for each ioctl every time we need to add a new feature, define an extension chain instead. As we add optional interfaces to control the ioctl, we define a new extension struct that can be linked into the ioctl data only when required by the user. The key advantage being able to ignore large control structs for optional interfaces/extensions, while being able to process them in a consistent manner. In comparison to other extensible ioctls, the key difference is the use of a linked chain of extension structs vs an array of tagged pointers. For example, struct drm_amdgpu_cs_chunk { __u32 chunk_id; __u32 length_dw; __u64 chunk_data; }; struct drm_amdgpu_cs_in { __u32 ctx_id; __u32 bo_list_handle; __u32 num_chunks; __u32 _pad; __u64 chunks; }; allows userspace to pass in array of pointers to extension structs, but must therefore keep constructing that array along side the command stream. In dynamic situations like that, a linked list is preferred and does not similar from extra cache line misses as the extension structs themselves must still be loaded separate to the chunks array. v2: Apply the tail call optimisation directly to nip the worry of stack overflow in the bud. v3: Defend against recursion. v4: Fixup local types to match new uabi Opens: - do we include the result as an out-field in each chain? struct i915_user_extension { __u64 next_extension; __u64 name; __s32 result; __u32 mbz; /* reserved for future use */ }; * Undecided, so provision some room for future expansion. Signed-off-by: -
Sujaritha Sundaresan authored
Adding a call to intel_uc_suspend in i915_gem_suspend, which is a common point for the suspend/resume and hibernate paths. This fixes an unbalanced call that causes issues with the CTB register/deregister. v2: Making the call unconditional (Daniele) Moving the call to after the GEM_BUG_ON (Chris) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by:
-
Chris Wilson authored
Use the igt_live_test framework for detecting whether an unwanted hang occurred during test execution, and report failure if it does. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321194031.20240-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
32 is too many for the likes of kbl, and in order to insert that many requests into the ring requires us to declare the first few hung -- understandably a slow and unexpected process. Instead, measure the size of a singe requests and use that to estimate the upper bound on the chain length we can use for our test, remembering to flush the previous chain between tests for safety. Signed-off-by:
"Yokoyama, Caz" <caz.yokoyama@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321194031.20240-1-chris@chris-wilson.co.uk
-
- 21 Mar, 2019 5 commits
-
-
Chris Wilson authored
If we are already in the desired write domain of a set-domain ioctl, then there is nothing for us to do and we can quickly return back to userspace, avoiding any lock contention. By recognising that the write_domain is always a subset of the read_domains, and excluding the no-op case of requiring 0 read_domains in the ioctl, we can infer if the current write_domain matches the target read_domains, there is nothing for us to do. Secondary aspect of this is that we undo the arbitrary fetching and potential flushing of all pages for a set-domain(.write=CPU) call on a fresh object -- which was introduced simply because we do the get-pages before taking the struct_mutex. References: 40e62d5d ("drm/i915: Acquire the backing storage outside of struct_mutex in set-domain") Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321161908.8007-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
When we return pages to the system, we ensure that they are marked as being in the CPU domain since any external access is uncontrolled and we must assume the worst. This means that we need to always flush the pages on acquisition if we need to use them on the GPU, and from the beginning have used set-domain. Set-domain is overkill for the purpose as it is a general synchronisation barrier, but our intent is to only flush the pages being swapped in. If we move that flush into the pages acquisition phase, we know then that when we have obj->mm.pages, they are coherent with the GPU and need only maintain that status without resorting to heavy handed use of set-domain. The principle knock-on effect for userspace is through mmap-gtt pagefaulting. Our uAPI has always implied that the GTT mmap was async (especially as when any pagefault occurs is unpredicatable to userspace) and so userspace had to apply explicit domain control itself (set-domain). However, swapping is transparent to the kernel, and so on first fault we need to acquire the pages and make them coherent for access through the GTT. Our use of set-domain here leaks into the uABI that the first pagefault was synchronous. This is unintentional and baring a few igt should be unoticed, nevertheless we bump the uABI version for mmap-gtt to reflect the change in behaviour. Another implication of the change is that gem_create() is presumed to create an object that is coherent with the CPU and is in the CPU write domain, so a set-domain(CPU) following a gem_create() would be a minor operation that merely checked whether we could allocate all pages for the object. On applying this change, a set-domain(CPU) causes a clflush as we acquire the pages. This will have a small impact on mesa as we move the clflush here on !llc from execbuf time to create, but that should have minimal performance impact as the same clflush exists but is now done early and because of the clflush issue, userspace recycles bo and so should resist allocating fresh objects. Internally, the presumption that objects are created in the CPU write-domain and remain so through writes to obj->mm.mapping is more prevalent than I expected; but easy enough to catch and apply a manual flush. For the future, we should push the page flush from the central set_pages() into the callers so that we can more finely control when it is applied, but for now doing it one location is easier to validate, at the cost of sometimes flushing when there is no need. Signed-off-by:
-
Chris Wilson authored
The timeline->name is only used for convenience in pretty printing the i915_request.fence->ops->get_timeline_name() and it is just as convenient to pull it from the gem_context directly. The few instances of its use inside GEM_TRACE() has proven more of a nuisance than helpful, so not worth saving imo. Signed-off-by:
-
Chris Wilson authored
The user_handle need only be known by userspace for it to lookup the context via the idr; internally we have no use for it. Signed-off-by:
-
Chris Wilson authored
Define a mutex for the exclusive use of interacting with the per-file context-idr, that was previously guarded by struct_mutex. This allows us to reduce the coverage of struct_mutex, with a view to removing the last bits coordinating GEM context later. (In the short term, we avoid taking struct_mutex while using the extended constructor functions, preventing some nasty recursion.) v2: s/context_lock/context_idr_lock/ Signed-off-by:
-
