This patch removes the drm hdmi platform data structure which is no
longer in use by drm hdmi driver after this patch set get merged. s5p
hdmi platform data structure is used instead.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The plug/unplug interrupt are handled by a separate interrupt.
So there is no need to replicate this mechanism in HDMI core.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The 'exynos-drm-hdmi' driver makes use of s5p-tv platform devices. Therefore
the driver should use the same platform data to prevent crashes caused by
dereferencing incorrect types.  This patch corrects the exynos-drm-hdmi driver
to the platform data from s5p-hdmi.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch fixes 'unsigned < 0' check in probe. Moreover it
releases an interrupt at remove.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch implements check if HDMI is version 1.3 by using a driver variant
instead of platform data.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch extends s5p-hdmi platform data by a GPIO identifier for
Hot-Plug-Detection pin.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The size argument means just one element size when we call kcalloc, so
G2D_CMDLIST_NUM * sizeof(*node) is wrong.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch is to exactly calculate CRTC shown via screen for all cases.
Refer exynos_plane_get_size() function for this. Also source position of
fb is fixed when start position of CRTC is negative number.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Changelog v3:
make exynos_drm_display_power function use exynos_drm_best_encoder
function instead of connector->encoder to get a valid encoder.
connector->encoder could be NULL because with DRM_IOCTL_MODE_RMFB
request, connector->encoder is NULL so fix this issue.

Changelog v2:
remove static prefix so that exynos_drm_best_encoder function
could be called by other modules.

Changelog v1:
this patch fixes the issue that display power callback isn't called.
with DRM_IOCTL_MODE_RMFB request, encoder->connector becomes NULL
so display_ops->power_on() wouldn't be called so this patch makes
exynos_drm_best_encoder function to be used to get a valid encoder
of each connector.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Two device ids are created for exynos4-fb and exynos5-fb.
Also, added driver data for exynos4 and exynos5 to pick the timing base address
at runtime to write data into appropriate register address.
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drm_mode_create() returns NULL if it fails to create
a new display mode. Check the value returned to avoid NULL
pointer deferencing later.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

this patch adds drm_wait_vblank support to Virtual Display module
so user can use DRM_IOCT_WAIT_VBLANK ioctl with this patch.
for this, you should set _DRM_VBLANK_EXYNOS_VIDI flags to
vblwait->request.type
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

when fb changing is requested, crtc's dpms mode should be on.
if not on, return -EPERM so that the hardware can't be accessed.
if user requesed dpms off and next SetCrtc with an another fb
then the hardware can be accessed with dpms off to write overlay
data onto some registers so this patch will prevent from accessing
the hardware with dpms off.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

when page flip is requested, crtc's dpms mode should be on.
if not on, return -EINVAL so that it doesn't access hardware.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

exynos_drm_crtc_dpms function doesn't need mutex lock
because mutex lock was called by drm framework so this
patch removes mutex lock call from that function to avoid
duplicated mutex locking.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

this patch adds pid to g2d_runqueue_node as member to identify
which process owns this node.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

this patch ensures that each plane connected to encoder is disabled
when released, by adding disable callback function of encoder helper

we had faced with one issue that invalid memory is accessed by dma
once drm is released and then the dma is turned on again. actually,
in our case, page fault was incurred with iommu. the reason is that
a gem buffer accessed by the dma is also released once drm is released.

so this patch would fix this issue ensuring the dma is disabled
when released.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

if old_crtc isn't same as encoder->crtc then it means that
user changed crtc id to another one so a plane to old_crtc
should be disabled so that current plane can be updated safely
and plane->crtc should be set to new crtc(encoder->crtc)
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

this patch adds buf_cnt variable in exynos_drm_fb structure and
that means a buffer count to drm framebuffer and also adds two
functions to get/set the buffer count from/to exynos_drm_fb structure.
if pixel format is not DRM_FORMAT_NV12MT then it gets a buffer count
to drm framebuffer refering to mode_cmd->handles and offsets.
but when booted, the buffer count will always be 1 because pixel
format of console framebuffer is RGB format.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

the values set to registers will be updated into real registers
at vsync so dma operation could be malfunctioned when accessed
to memory after gem buffer was released. this patch makes sure
that hw overlay is disabled before the gem buffer is released.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
wait for VSYNC instead of BACKPORCH.

Changelog v1:
the values set to registers will be updated into real registers
at vsync so dma operation could be malfunctioned when accessed
to memory after gem buffer was released. this patch makes sure
that hw overlay is disabled before the gem buffer is released.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
fixed comments.

Changelog v1:
this interface can be used to make sure that hardware overlay is disabled
to avoid that memory region is accessed by dma after gem buffer was released.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

this patch fixes that when drm_crtc_helper_set_mode() is called,
mode data for hardware overlay and conntroller are updated two times.
for example, in case that drm_crtc_helper_set_mode() is called,
overlay_ops->commit() and manager_ops->commit() callbacks can be called
two times, first at drm_crtc_helper_set_mode() and second
at drm_helper_connector_dpms().
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
fix pm operation when resume.

Changelog v1:
this patch separetes fimd_power_on into fimd_activate and fimd_clock and
fimd_activate function will call fimd_clock to control fimd power and
vsync interrupt.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Changelog v2:
fixed the issue that when sub driver is probed, no kms drivers such as
fimd or hdmi are failed. no kms drivers have no manager so if manager is
null then encoder and connector creation should be ignored.

Changelog v1:
this patch separates exynos_drm_subdrv_probe function into sub driver's probe call
and encoder/connector creation so that exynos drm core module can take exception
when some operation was failed properly.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

when remove callback of exynos_drm_subdrv is called, it could need
device object for sub driver to control things specific to hw such as
runtime pm.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

This is a major rework of the nouveau driver core, to reflect more closely
how the hw is used and to make it easier to implement newer features now
that the GPUs are more clearly understood than when nouveau started.

It also contains a few other bits:
thermal patches
nv41/44 pcie gart fixes
i2c unregistering fixes.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (191 commits)
  drm/nv98/crypt: fix fuc build with latest envyas
  drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
  drm/nv41/vm: fix and enable use of "real" pciegart
  drm/nv44/vm: fix and enable use of "real" pciegart
  drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
  drm/nouveau: store supported dma mask in vmmgr
  drm/nvc0/ibus: initial implementation of subdev
  drm/nouveau/therm: add support for fan-control modes
  drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
  drm/nouveau/therm: calculate the pwm divisor on nv50+
  drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
  drm/nouveau/therm: move thermal-related functions to the therm subdev
  drm/nouveau/bios: parse the pwm divisor from the perf table
  drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
  drm/nouveau/therm: rework thermal table parsing
  drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
  drm/nouveau: fix pm initialization order
  drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
  drm/nouveau: log channel debug/error messages from client object rather than drm client
  drm/nouveau: have drm debugging macros build on top of core macros
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_dp.c

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Details of the problem, and solution, are in comments in the commit
proper.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Hopefully fixed the tlb flush timeout issue.  Was able to observe this
condition occur occasionally, and it appears the binary driver doesn't
wait on the old condition either..

Should give 39-bit DMA addressing on the relevant chipsets.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Something seems to be missing in regards to flushing specific ranges of
the TLB.  For the moment, flushing the entire thing seems to make it
work alright.

Should give 39-bit DMA addressing on the relevant chipsets.

v2: allocate contig 16KiB for dummy pages, reported by mwk on irc
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We don't need to pull the page address out of the page tables on nv4x
chips that have a real GART.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For now, only 2 control modes are available:
- NONE: The fan is never touched (default)
- MANUAL: The fan is set to the user-defined fan speed (pwm1)

This patch introduces a distinction between ptherm internal fan management
and external fan management. The latter is bound to respect the fan mode
while the first can still select the speed it wants unless the NONE mode
is selected. This is important for automatic fan management.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This was reported by tizbac on IRC.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: Martin Peres <martin.peres@labri.fr>
- fixed unintentional use of floating point
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The previous driver waited for 250ms to accumulate data. This version times a
complete fan rotation and extrapolates to RPM.

The fan rotational speed should now be read in less than 250ms (worst case)
and usually in less 50ms.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

It looks scary because of the size, but I tried to keep the differences minimal.
Further patches will fix the actual "driver" code and add new features.

v2: change filenames, split to submodules

v3: add a missing include

v4: Ben Skeggs <bskeggs@redhat.com>
- fixed set_defaults() to allow min_duty < 30 (thermal table will
  override this if it's actually necessary)
- fixed set_defaults() to not provide pwm_freq so nv4x (which only has
  pwm_div) can actually work.  the boards using pwm_freq will have a
  thermal table entry to provide us the value.
- removed unused files
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

v2: perf_table now is more in line with the other functions
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>