- 02 Oct, 2008 8 commits
-
-
David Winn authored
Commit 22af89aa ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up. Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: snd-powermac: HP detection for 1st iMac G3 SL ALSA: snd-powermac: mixers for PowerMac G4 AGP ASoC: Set correct name for WM8753 rec mixer output
-
Takashi Iwai authored
-
Risto Suominen authored
Correct headphone detection for 1st generation iMac G3 Slot-loading (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Risto Suominen authored
Add mixer controls for PowerMac G4 AGP (Screamer). This patch fixes the regression in the recent snd-powermac which doesn't support some G3/G4 PowerMacs: http://lkml.org/lkml/2008/10/1/220Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Rob Sims authored
Rob Sims wrote: "I can't seem to turn on register 0x17, bit 3 in the sound chip, except by codec_reg_write; the mixer lacks direct or indirect control. It seems there are two names for the output of the rec mixer: Capture ST Mixer Playback Mixer Would the following do the trick?" I confirm that this solves the audio problems I was having. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Kumar Gala authored
Commit 00c5372d caused the MPC8544DS board to hang at boot. The MPC8544DS is unique in that it doesn't use the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD). So the dummy read at the end of the address space causes us to hang. We can detect the situation by comparing the bridge's BARs versus the root complex. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-
Bruce Allan authored
Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: arjan@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 01 Oct, 2008 12 commits
-
-
Mike Rapoport authored
This patch fixes a build error in the pxa2xx-spi driver, introduced by commit 7e964455 ("pxa2xx_spi: dma bugfixes") CC drivers/spi/pxa2xx_spi.o drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers': drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c: In function 'pump_transfers': drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [dbrownell@users.sourceforge.net: fix warning too ] Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vmi: fix broken LDT access x86: fix typo in enable_mtrr_cleanup early parameter
-
David Howells authored
Fix the IRQ handling on the MN10300 arch. This patch makes a number of significant changes: (1) It separates the irq_chip definition for edge-triggered interrupts from the one for level-triggered interrupts. This is necessary because the MN10300 PIC latches the IRQ channel's interrupt request bit (GxICR_REQUEST), even after the device has ceased to assert its interrupt line and the interrupt channel has been disabled in the PIC. So for level-triggered interrupts we need to clear this bit when we re-enable - which is achieved by setting GxICR_DETECT but not GxICR_REQUEST when writing to the register. Not doing this results in spurious interrupts occurring because calling mask_ack() at the start of handle_level_irq() is insufficient - it fails to clear the REQUEST latch because the device that caused the interrupt is still asserting its interrupt line at this point. (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt request flag for edge-triggered interrupts lest it lose an interrupt. (4) The end() operation is now left to the default (no-operation) as __do_IRQ() is compiled out. This may affect misrouted_irq(), but according to Thomas Gleixner it's the correct thing to do. (5) handle_level_irq() is used for edge-triggered interrupts rather than handle_edge_irq() as the MN10300 PIC latches interrupt events even on masked IRQ channels, thus rendering IRQ_PENDING unnecessary. It is sufficient to call mask_ack() at the start and unmask() at the end. (6) For level-triggered interrupts, ack() is now NULL as it's not used, and there is no effective ACK function on the PIC. mask_ack() is now the same as mask() as the latch continues to latch, even when the channel is masked. Further, the patch discards the disable() op implementation as its now the same as the mask() op implementation, which is used instead. It also discards the enable() op implementations as they're now the same as the unmask() op implementations, which are used instead. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm mpath: add missing path switching locking dm: cope with access beyond end of device in dm_merge_bvec dm: always allow one page in dm_merge_bvec
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: af_key: Free dumping state on socket close XFRM,IPv6: initialize ip6_dst_blackhole_ops.kmem_cachep ipv6: NULL pointer dereferrence in tcp_v6_send_ack tcp: Fix NULL dereference in tcp_4_send_ack() sctp: Fix kernel panic while process protocol violation parameter iucv: Fix mismerge again. ipsec: Fix pskb_expand_head corruption in xfrm_state_check_space
-
Chandra Seetharaman authored
Moving the path activation to workqueue along with scsi_dh patches introduced a race. It is due to the fact that the current_pgpath (in the multipath data structure) can be modified if changes happen in any of the paths leading to the lun. If the changes lead to current_pgpath being set to NULL, then it leads to the invalid access which results in the panic below. This patch fixes that by storing the pgpath to activate in the multipath data structure and properly protecting it. Note that if activate_path is called twice in succession with different pgpath, with the second one being called before the first one is done, then activate path will be called twice for the second pgpath, which is fine. Unable to handle kernel paging request for data at address 0x00000020 Faulting instruction address: 0xd000000000aa1844 cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80] pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath] lr: c000000000087a2c: .run_workqueue+0x114/0x204 sp: c00000006b987d00 msr: 8000000000009032 dar: 20 dsisr: 40000000 current = 0xc0000000676bb3f0 paca = 0xc0000000006f3680 pid = 2528, comm = kmpath_handlerd enter ? for help [c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204 [c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144 [c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4 [c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68 Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
If for any reason dm_merge_bvec() is given an offset beyond the end of the device, avoid an oops and always allow one page to be added to an empty bio. We'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Mikulas Patocka authored
Some callers assume they can always add at least one page to an empty bio, so dm_merge_bvec should not return 0 in this case: we'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
-
Timo Teras authored
Fix a xfrm_{state,policy}_walk leak if pfkey socket is closed while dumping is on-going. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaud Ebalard authored
ip6_dst_blackhole_ops.kmem_cachep is not expected to be NULL (i.e. to be initialized) when dst_alloc() is called from ip6_dst_blackhole(). Otherwise, it results in the following (xfrm_larval_drop is now set to 1 by default): [ 78.697642] Unable to handle kernel paging request for data at address 0x0000004c [ 78.703449] Faulting instruction address: 0xc0097f54 [ 78.786896] Oops: Kernel access of bad area, sig: 11 [#1] [ 78.792791] PowerMac [ 78.798383] Modules linked in: btusb usbhid bluetooth b43 mac80211 cfg80211 ehci_hcd ohci_hcd sungem sungem_phy usbcore ssb [ 78.804263] NIP: c0097f54 LR: c0334a28 CTR: c002d430 [ 78.809997] REGS: eef19ad0 TRAP: 0300 Not tainted (2.6.27-rc5) [ 78.815743] MSR: 00001032 <ME,IR,DR> CR: 22242482 XER: 20000000 [ 78.821550] DAR: 0000004c, DSISR: 40000000 [ 78.827278] TASK = eef0df40[3035] 'mip6d' THREAD: eef18000 [ 78.827408] GPR00: 00001032 eef19b80 eef0df40 00000000 00008020 eef19c30 00000001 00000000 [ 78.833249] GPR08: eee5101c c05a5c10 ef9ad500 00000000 24242422 1005787c 00000000 1004f960 [ 78.839151] GPR16: 00000000 10024e90 10050040 48030018 0fe44150 00000000 00000000 eef19c30 [ 78.845046] GPR24: eef19e44 00000000 eef19bf8 efb37c14 eef19bf8 00008020 00009032 c0596064 [ 78.856671] NIP [c0097f54] kmem_cache_alloc+0x20/0x94 [ 78.862581] LR [c0334a28] dst_alloc+0x40/0xc4 [ 78.868451] Call Trace: [ 78.874252] [eef19b80] [c03c1810] ip6_dst_lookup_tail+0x1c8/0x1dc (unreliable) [ 78.880222] [eef19ba0] [c0334a28] dst_alloc+0x40/0xc4 [ 78.886164] [eef19bb0] [c03cd698] ip6_dst_blackhole+0x28/0x1cc [ 78.892090] [eef19be0] [c03d9be8] rawv6_sendmsg+0x75c/0xc88 [ 78.897999] [eef19cb0] [c038bca4] inet_sendmsg+0x4c/0x78 [ 78.903907] [eef19cd0] [c03207c8] sock_sendmsg+0xac/0xe4 [ 78.909734] [eef19db0] [c03209e4] sys_sendmsg+0x1e4/0x2a0 [ 78.915540] [eef19f00] [c03220a8] sys_socketcall+0xfc/0x210 [ 78.921406] [eef19f40] [c0014b3c] ret_from_syscall+0x0/0x38 [ 78.927295] --- Exception: c01 at 0xfe2d730 [ 78.927297] LR = 0xfe2d71c [ 78.939019] Instruction dump: [ 78.944835] 91640018 9144001c 900a0000 4bffff44 9421ffe0 7c0802a6 bf810010 7c9d2378 [ 78.950694] 90010024 7fc000a6 57c0045e 7c000124 <83e3004c> 8383005c 2f9f0000 419e0050 [ 78.956464] ---[ end trace 05fa1ed7972487a1 ]--- As commented by Benjamin Thery, the bug was introduced by f2fc6a54, while adding network namespaces support to ipv6 routes. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis V. Lunev authored
The following actions are possible: tcp_v6_rcv skb->dev = NULL; tcp_v6_do_rcv tcp_v6_hnd_req tcp_check_req req->rsk_ops->send_ack == tcp_v6_send_ack So, skb->dev can be NULL in tcp_v6_send_ack. We must obtain namespace from dst entry. Thanks to Vitaliy Gusev <vgusev@openvz.org> for initial problem finding in IPv4 code. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vitaliy Gusev authored
Fix NULL dereference in tcp_4_send_ack(). As skb->dev is reset to NULL in tcp_v4_rcv() thus OOPS occurs: BUG: unable to handle kernel NULL pointer dereference at 00000000000004d0 IP: [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 Stack: ffff810005dbb000 ffff810015c8acc0 e77b2c6e5f861600 a01610802e90cb6d 0a08010100000000 88afffff88afffff 0000000080762be8 0000000115c872e8 0004122000000000 0000000000000001 ffffffff80762b88 0000000000000020 Call Trace: <IRQ> [<ffffffff80499c33>] tcp_v4_reqsk_send_ack+0x20/0x22 [<ffffffff8049bce5>] tcp_check_req+0x108/0x14c [<ffffffff8047aaf7>] ? rt_intern_hash+0x322/0x33c [<ffffffff80499846>] tcp_v4_do_rcv+0x399/0x4ec [<ffffffff8045ce4b>] ? skb_checksum+0x4f/0x272 [<ffffffff80485b74>] ? __inet_lookup_listener+0x14a/0x15c [<ffffffff8049babc>] tcp_v4_rcv+0x6a1/0x701 [<ffffffff8047e739>] ip_local_deliver_finish+0x157/0x24a [<ffffffff8047ec9a>] ip_local_deliver+0x72/0x7c [<ffffffff8047e5bd>] ip_rcv_finish+0x38d/0x3b2 [<ffffffff803d3548>] ? scsi_io_completion+0x19d/0x39e [<ffffffff8047ebe5>] ip_rcv+0x2a2/0x2e5 [<ffffffff80462faa>] netif_receive_skb+0x293/0x303 [<ffffffff80465a9b>] process_backlog+0x80/0xd0 [<ffffffff802630b4>] ? __rcu_process_callbacks+0x125/0x1b4 [<ffffffff8046560e>] net_rx_action+0xb9/0x17f [<ffffffff80234cc5>] __do_softirq+0xa3/0x164 [<ffffffff8020c52c>] call_softirq+0x1c/0x28 <EOI> [<ffffffff8020de1c>] do_softirq+0x34/0x72 [<ffffffff80234b8e>] local_bh_enable_ip+0x3f/0x50 [<ffffffff804d43ca>] _spin_unlock_bh+0x12/0x14 [<ffffffff804599cd>] release_sock+0xb8/0xc1 [<ffffffff804a6f9a>] inet_stream_connect+0x146/0x25c [<ffffffff80243078>] ? autoremove_wake_function+0x0/0x38 [<ffffffff8045751f>] sys_connect+0x68/0x8e [<ffffffff80291818>] ? fd_install+0x5f/0x68 [<ffffffff80457784>] ? sock_map_fd+0x55/0x62 [<ffffffff8020b39b>] system_call_after_swapgs+0x7b/0x80 Code: 41 10 11 d0 83 d0 00 4d 85 ed 89 45 c0 c7 45 c4 08 00 00 00 74 07 41 8b 45 04 89 45 c8 48 8b 43 20 8b 4d b8 48 8d 55 b0 48 89 de <48> 8b 80 d0 04 00 00 48 8b b8 60 01 00 00 e8 20 ae fe ff 65 48 RIP [<ffffffff80498503>] tcp_v4_send_ack+0x203/0x250 RSP <ffffffff80762b78> CR2: 00000000000004d0 Signed-off-by: Vitaliy Gusev <vgusev@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Sep, 2008 17 commits
-
-
Zachary Amsden authored
This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: stable@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Zachary Amsden authored
After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3eSigned-off-by: Zachary Amsden <zach@vmware.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Put the space for cpu0 per-cpu area into .data section
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix model for Dell Inspiron 1525 ALSA: ASoC: Fix cs4270 error path
-
git://git.o-hand.com/linux-mfdLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: Fix asic3 compilation mfd: Fix Kconfig accroding to the new gpiolib symbols
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix failure to shutdown with CPU hotplug powerpc: Fix PCI in Holly device tree
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: hrtimer: prevent migration of per CPU hrtimers hrtimer: mark migration state hrtimer: fix migration of CB_IRQSAFE_NO_SOFTIRQ hrtimers hrtimer: migrate pending list on cpu offline Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
Wei Yongjun authored
Since call to function sctp_sf_abort_violation() need paramter 'arg' with 'struct sctp_chunk' type, it will read the chunk type and chunk length from the chunk_hdr member of chunk. But call to sctp_sf_violation_paramlen() always with 'struct sctp_paramhdr' type's parameter, it will be passed to sctp_sf_abort_violation(). This may cause kernel panic. sctp_sf_violation_paramlen() |-- sctp_sf_abort_violation() |-- sctp_make_abort_violation() This patch fixed this problem. This patch also fix two place which called sctp_sf_violation_paramlen() with wrong paramter type. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Takashi Iwai authored
Dell Inspiron 1525 seems to have a buggy BIOS setup and screws up the recent codec parser, as reported by Oleksandr Natalenko: http://lkml.org/lkml/2008/9/12/203 This patch adds the working model, dell-3stack, statically. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
Jean Delvare authored
The error path in cs4270_probe/cs4270_remove is pretty broken: * If cs4270_probe fails, codec is leaked. * If snd_soc_register_card fails, cs4270_i2c_driver stays registered. * If I2C support is enabled but no I2C device is found, i2c_del_driver is never called (neither in cs4270_probe nor in cs4270_remove. Fix all 3 problems by implementing a clean error path in cs4270_probe and jumping to its labels as needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Heiko Carstens authored
fb65a7c0 ("iucv: Fix bad merging.") fixed a merge error, but in a wrong way. We now end up with the bug below. This patch corrects the mismerge like it was intended. BUG: scheduling while atomic: swapper/1/0x00000000 Modules linked in: CPU: 1 Not tainted 2.6.27-rc7-00094-gc0f4d6d4 #9 Process swapper (pid: 1, task: 000000003fe7d988, ksp: 000000003fe838c0) 0000000000000000 000000003fe839b8 0000000000000002 0000000000000000 000000003fe83a58 000000003fe839d0 000000003fe839d0 0000000000390de6 000000000058acd8 00000000000000d0 000000003fe7dcd8 0000000000000000 000000000000000c 000000000000000d 0000000000000000 000000003fe83a28 000000000039c5b8 0000000000015e5e 000000003fe839b8 000000003fe83a00 Call Trace: ([<0000000000015d6a>] show_trace+0xe6/0x134) [<0000000000039656>] __schedule_bug+0xa2/0xa8 [<0000000000391744>] schedule+0x49c/0x910 [<0000000000391f64>] schedule_timeout+0xc4/0x114 [<00000000003910d4>] wait_for_common+0xe8/0x1b4 [<00000000000549ae>] call_usermodehelper_exec+0xa6/0xec [<00000000001af7b8>] kobject_uevent_env+0x418/0x438 [<00000000001d08fc>] bus_add_driver+0x1e4/0x298 [<00000000001d1ee4>] driver_register+0x90/0x18c [<0000000000566848>] netiucv_init+0x168/0x2c8 [<00000000000120be>] do_one_initcall+0x3e/0x17c [<000000000054a31a>] kernel_init+0x1ce/0x248 [<000000000001a97a>] kernel_thread_starter+0x6/0xc [<000000000001a974>] kernel_thread_starter+0x0/0xc iucv: NETIUCV driver initialized initcall netiucv_init+0x0/0x2c8 returned with preemption imbalance Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
We're never supposed to shrink the headroom or tailroom. In fact, shrinking the headroom is a fatal action. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
J.A. Magallón authored
Correct typo for 'enable_mtrr_cleanup' early boot param name. Signed-off-by: J.A. Magallon <jamagallon@ono.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Samuel Ortiz authored
map_size was declared from the wrong place. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
-
Samuel Ortiz authored
HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
-
Johannes Berg authored
I tracked down the shutdown regression to CPUs not dying when being shut down during power-off. This turns out to be due to the system_state being SYSTEM_POWER_OFF, which this code doesn't take as a valid state for shutting off CPUs in. This has never made sense to me, but when I added hotplug code to implement hibernate I only "made it work" and did not question the need to check the system_state. Thomas Gleixner helped me dig, but the only thing we found is that it was added with the original commit that added CPU hotplug support. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
David Gibson authored
The PCI bridge on the Holly board is incorrectly represented in the device tree. The current device tree node for the PCI bridge sits under the tsi-bridge node. That's not obviously wrong, but the PCI bridge translates some PCI spaces into CPU address ranges which were not translated by the "ranges" property in tsi-bridge node. We used to get away with this problem because the PCI bridge discovery code was also buggy, assuming incorrectly that PCI host bridge nodes were always directly under the root bus and treating the translated addresses as raw CPU addresses, rather than parent bus addresses. This has since been fixed, thus breaking Holly. This could be fixed by adding extra translations to the tsi-bridge node, but this patch instead moves the Holly PCI bridge out of the tsi-bridge node to the root bus. This makes the tsi-bridge node represent only the built-in IO devices in the bridge, with a more-or-less contiguous address range. This is the same convention used on Freescale SoC chips, where the "soc" node represents only the IMMR region, and the PCI and other bus bridges are separate nodes under the root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 Sep, 2008 3 commits
-
-
Tony Luck authored
Initial fix for making sure that we can access percpu variables in all C code (commit: 10617bbe) inadvertantly allocated the memory in the "percpu" section of the vmlinux ELF executable. This confused kexec/dump. Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Linus Torvalds authored
-
Balbir Singh authored
There's a race between mm->owner assignment and swapoff, more easily seen when task slab poisoning is turned on. The condition occurs when try_to_unuse() runs in parallel with an exiting task. A similar race can occur with callers of get_task_mm(), such as /proc/<pid>/<mmstats> or ptrace or page migration. CPU0 CPU1 try_to_unuse looks at mm = task0->mm increments mm->mm_users task 0 exits mm->owner needs to be updated, but no new owner is found (mm_users > 1, but no other task has task->mm = task0->mm) mm_update_next_owner() leaves mmput(mm) decrements mm->mm_users task0 freed dereferencing mm->owner fails The fix is to notify the subsystem via mm_owner_changed callback(), if no new owner is found, by specifying the new task as NULL. Jiri Slaby: mm->owner was set to NULL prior to calling cgroup_mm_owner_callbacks(), but must be set after that, so as not to pass NULL as old owner causing oops. Daisuke Nishimura: mm_update_next_owner() may set mm->owner to NULL, but mem_cgroup_from_task() and its callers need to take account of this situation to avoid oops. Hugh Dickins: Lockdep warning and hang below exec_mmap() when testing these patches. exit_mm() up_reads mmap_sem before calling mm_update_next_owner(), so exec_mmap() now needs to do the same. And with that repositioning, there's now no point in mm_need_new_owner() allowing for NULL mm. Reported-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-