- 28 May, 2018 1 commit
-
-
Jack Morgenstein authored
Make the MR writability flags check, which is performed in umem.c, a static inline function in file ib_verbs.h This allows the function to be used by low-level infiniband drivers. Cc: <stable@vger.kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com>
-
- 23 May, 2018 4 commits
-
-
oulijun authored
When posted work request, it need to compute the length of all sges of every wr and fill it into the msg_len field of send wqe. Thus, While posting multiple wr, tmp_len should be reinitialized to zero. Fixes: 8b9b8d14 ("RDMA/hns: Fix the endian problem for hns") Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
oulijun authored
When use cq record db for kernel, it needs to set the hr_cq->db_en to 1 and configure the dma address of record cq db of qp context. Fixes: 86188a88 ("RDMA/hns: Support cq record doorbell for kernel space") Signed-off-by:
-
Jason Gunthorpe authored
The err pointer comes from uverbs_attr_get, not from the uobject member, which does not store an ERR_PTR. Fixes: be934cca ("IB/uverbs: Add device memory registration ioctl support") Signed-off-by:
-
Kalderon, Michal authored
Each user_context receives a separate dpi value and thus a different address on the doorbell bar. The qedr_mmap function needs to validate the address and map the doorbell bar accordingly. The current implementation always checked against dpi=0 doorbell range leading to a wrong mapping for doorbell bar. (It entered an else case that mapped the address differently). qedr_mmap should only be used for doorbells, so the else was actually wrong in the first place. This only has an affect on arm architecture and not an issue on a x86 based architecture. This lead to doorbells not occurring on arm based systems and left applications that use more than one dpi (or several applications run simultaneously ) to hang. Fixes: ac1b36e5 ("qedr: Add support for user context verbs") Signed-off-by:
Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Reviewed-by:
-
- 15 May, 2018 1 commit
-
-
Lidong Chen authored
User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads. If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has exited, get_pid_task will return NULL and ib_umem_release will not decrease mm->pinned_vm. Instead of using threads to locate the mm, use the overall tgid from the ib_ucontext struct instead. This matches the behavior of ODP and disassociate in handling the mm of the process that called ibv_reg_mr. Cc: <stable@vger.kernel.org> Fixes: 87773dd5 ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get") Signed-off-by:
Lidong Chen <lidongchen@tencent.com> Signed-off-by:
-
- 09 May, 2018 23 commits
-
-
Christophe Jaillet authored
The error handling path of 'c4iw_get_dma_mr()' does not free resources in the correct order. If an error occures, it can leak 'mhp->wr_waitp'. Fixes: a3f12da0 ("iw_cxgb4: allocate wait object for each memory object") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Andrew Boyer authored
The current code sets an affinity hint with a cpumask_t stored on the stack. This value can then be accessed through /proc/irq/*/affinity_hint/, causing a segfault or returning corrupt data. Move the cpumask_t into struct i40iw_msix_vector so it is available later. Backtrace: BUG: unable to handle kernel paging request at ffffb16e600e7c90 IP: irq_affinity_hint_proc_show+0x60/0xf0 PGD 17c0c6d067 PUD 17c0c6e067 PMD 15d4a0e067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: ... CPU: 3 PID: 172543 Comm: grep Tainted: G OE ... #1 Hardware name: ... task: ffff9a5caee08000 task.stack: ffffb16e659d8000 RIP: 0010:irq_affinity_hint_proc_show+0x60/0xf0 RSP: 0018:ffffb16e659dbd20 EFLAGS: 00010086 RAX: 0000000000000246 RBX: ffffb16e659dbd20 RCX: 0000000000000000 RDX: ffffb16e600e7c90 RSI: 0000000000000003 RDI: 0000000000000046 RBP: ffffb16e659dbd88 R08: 0000000000000038 R09: 0000000000000001 R10: 0000000070803079 R11: 0000000000000000 R12: ffff9a59d1d97a00 R13: ffff9a5da47a6cd8 R14: ffff9a5da47a6c00 R15: ffff9a59d1d97a00 FS: 00007f946c31d740(0000) GS:ffff9a5dc1800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffb16e600e7c90 CR3: 00000016a4339000 CR4: 00000000007406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: seq_read+0x12d/0x430 ? sched_clock_cpu+0x11/0xb0 proc_reg_read+0x48/0x70 __vfs_read+0x37/0x140 ? security_file_permission+0xa0/0xc0 vfs_read+0x96/0x140 SyS_read+0x58/0xc0 do_syscall_64+0x5a/0x190 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7f946bbc97e0 RSP: 002b:00007ffdd0c4ae08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000000000096b000 RCX: 00007f946bbc97e0 RDX: 000000000096b000 RSI: 00007f946a2f0000 RDI: 0000000000000004 RBP: 0000000000001000 R08: 00007f946a2ef011 R09: 000000000000000a R10: 0000000000001000 R11: 0000000000000246 R12: 00007f946a2f0000 R13: 0000000000000004 R14: 0000000000000000 R15: 00007f946a2f0000 Code: b9 08 00 00 00 49 89 c6 48 89 df 31 c0 4d 8d ae d8 00 00 00 f3 48 ab 4c 89 ef e8 6c 9a 56 00 49 8b 96 30 01 00 00 48 85 d2 74 3f <48> 8b 0a 48 89 4d 98 48 8b 4a 08 48 89 4d a0 48 8b 4a 10 48 89 RIP: irq_affinity_hint_proc_show+0x60/0xf0 RSP: ffffb16e659dbd20 CR2: ffffb16e600e7c90 Fixes: 8e06af71 ("i40iw: add main, hdr, status") Signed-off-by:
Andrew Boyer <andrew.boyer@dell.com> Reviewed-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Andrew Boyer authored
In this switch there is a reference held on the QP. 'continue' will grab the next event without releasing the reference, causing a leak. Change it to 'break' to drop the reference before grabbing the next event. Fixes: 4e9042e6 ("i40iw: add hw and utils files") Signed-off-by:
-
Andrew Boyer authored
A panic occurs when there is a newly-registered element on the QP/CQ MR list waiting to be attached, but a different MR is deregistered. The current code only checks for whether the list is empty, not whether the element being deregistered is actually on the list. Fix the panic by adding a boolean to track if the object is on the list. Fixes: d3749841 ("i40iw: add files for iwarp interface") Signed-off-by:
-
oulijun authored
When the last QP of eight QPs is not exist in hns_roce_v1_mr_free_work_fn function, the print for qpn of hr_qp may introduce a calltrace for NULL pointer. Signed-off-by:
-
oulijun authored
This patch mainly configure value for __internal_mr of mr_free_pd. Signed-off-by:
-
oulijun authored
When enabled inner_pa_vld field of mpt, The pa0 and pa1 will be valid and the hardware will use it directly and not use base address of pbl. As a result, it can reduce the delay. Signed-off-by:
-
oulijun authored
In order to avoid illegal use for desc_dma_addr of ring, it needs to set it zero when free cmq desc. Signed-off-by:
-
oulijun authored
When received multiply rq sge, it should tag the invalid lkey for the last non-zero length sge when have some sges' length are zero. This patch fixes it. Signed-off-by:
-
oulijun authored
Because hip06 hardware is not support for qp transition from reset to reset state, it need to return errno when qp transited from reset to reset. This patch fixes it. Signed-off-by:
-
oulijun authored
When configure global param function run fail, it should directly return and the initial flow will stop. Signed-off-by:
-
oulijun authored
Because the sys_image_guid of ib_device_attr structure is __be64, it need to use cpu_to_be64 for converting. Signed-off-by:
-
oulijun authored
To enable the linux-kernel system to load the hns-roce-hw-v2 driver automatically when hns-roce-hw-v2 is plugged in pci bus, it need to create a MODULE_DEVICE_TABLE for expose the pci_table of hns-roce-hw-v2 to user. Signed-off-by:
Zhou Wang <wangzhou1@hisilicon.com> Tested-by:
Xiaojun Tan <tanxiaojun@huawei.com> Signed-off-by:
-
oulijun authored
When used rq record db for kernel, it needs to set the rdb_en of hr_qp to 1 and configures the dma address of record rq db of qp context. Signed-off-by:
-
oulijun authored
It needs to set the rqie field of qp context by configured rq inline flags. Besides, it need to decide whether posting inline rqwqe by judged rq inline flags. Signed-off-by:
-
Alexandru Moise authored
This addresses 3 separate problems: 1. When using NVME over Fabrics we may end up sending IP packets in interrupt context, we should defer this work to a tasklet. [ 50.939957] WARNING: CPU: 3 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x1f/0xa0 [ 50.942602] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 4.17.0-rc3-ARCH+ #104 [ 50.945466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 50.948163] RIP: 0010:__local_bh_enable_ip+0x1f/0xa0 [ 50.949631] RSP: 0018:ffff88009c183900 EFLAGS: 00010006 [ 50.951029] RAX: 0000000080010403 RBX: 0000000000000200 RCX: 0000000000000001 [ 50.952636] RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffff817e04ec [ 50.954278] RBP: ffff88009c183910 R08: 0000000000000001 R09: 0000000000000614 [ 50.956000] R10: ffffea00021d5500 R11: 0000000000000001 R12: ffffffff817e04ec [ 50.957779] R13: 0000000000000000 R14: ffff88009566f400 R15: ffff8800956c7000 [ 50.959402] FS: 0000000000000000(0000) GS:ffff88009c180000(0000) knlGS:0000000000000000 [ 50.961552] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.963798] CR2: 000055c4ec0ccac0 CR3: 0000000002209001 CR4: 00000000000606e0 [ 50.966121] Call Trace: [ 50.966845] <IRQ> [ 50.967497] __dev_queue_xmit+0x62d/0x690 [ 50.968722] dev_queue_xmit+0x10/0x20 [ 50.969894] neigh_resolve_output+0x173/0x190 [ 50.971244] ip_finish_output2+0x2b8/0x370 [ 50.972527] ip_finish_output+0x1d2/0x220 [ 50.973785] ? ip_finish_output+0x1d2/0x220 [ 50.975010] ip_output+0xd4/0x100 [ 50.975903] ip_local_out+0x3b/0x50 [ 50.976823] rxe_send+0x74/0x120 [ 50.977702] rxe_requester+0xe3b/0x10b0 [ 50.978881] ? ip_local_deliver_finish+0xd1/0xe0 [ 50.980260] rxe_do_task+0x85/0x100 [ 50.981386] rxe_run_task+0x2f/0x40 [ 50.982470] rxe_post_send+0x51a/0x550 [ 50.983591] nvmet_rdma_queue_response+0x10a/0x170 [ 50.985024] __nvmet_req_complete+0x95/0xa0 [ 50.986287] nvmet_req_complete+0x15/0x60 [ 50.987469] nvmet_bio_done+0x2d/0x40 [ 50.988564] bio_endio+0x12c/0x140 [ 50.989654] blk_update_request+0x185/0x2a0 [ 50.990947] blk_mq_end_request+0x1e/0x80 [ 50.991997] nvme_complete_rq+0x1cc/0x1e0 [ 50.993171] nvme_pci_complete_rq+0x117/0x120 [ 50.994355] __blk_mq_complete_request+0x15e/0x180 [ 50.995988] blk_mq_complete_request+0x6f/0xa0 [ 50.997304] nvme_process_cq+0xe0/0x1b0 [ 50.998494] nvme_irq+0x28/0x50 [ 50.999572] __handle_irq_event_percpu+0xa2/0x1c0 [ 51.000986] handle_irq_event_percpu+0x32/0x80 [ 51.002356] handle_irq_event+0x3c/0x60 [ 51.003463] handle_edge_irq+0x1c9/0x200 [ 51.004473] handle_irq+0x23/0x30 [ 51.005363] do_IRQ+0x46/0xd0 [ 51.006182] common_interrupt+0xf/0xf [ 51.007129] </IRQ> 2. Work must always be offloaded to tasklet for rxe_post_send_kernel() when using NVMEoF in order to solve lock ordering between neigh->ha_lock seqlock and the nvme queue lock: [ 77.833783] Possible interrupt unsafe locking scenario: [ 77.833783] [ 77.835831] CPU0 CPU1 [ 77.837129] ---- ---- [ 77.838313] lock(&(&n->ha_lock)->seqcount); [ 77.839550] local_irq_disable(); [ 77.841377] lock(&(&nvmeq->q_lock)->rlock); [ 77.843222] lock(&(&n->ha_lock)->seqcount); [ 77.845178] <Interrupt> [ 77.846298] lock(&(&nvmeq->q_lock)->rlock); [ 77.847986] [ 77.847986] *** DEADLOCK *** 3. Same goes for the lock ordering between sch->q.lock and nvme queue lock: [ 47.634271] Possible interrupt unsafe locking scenario: [ 47.634271] [ 47.636452] CPU0 CPU1 [ 47.637861] ---- ---- [ 47.639285] lock(&(&sch->q.lock)->rlock); [ 47.640654] local_irq_disable(); [ 47.642451] lock(&(&nvmeq->q_lock)->rlock); [ 47.644521] lock(&(&sch->q.lock)->rlock); [ 47.646480] <Interrupt> [ 47.647263] lock(&(&nvmeq->q_lock)->rlock); [ 47.648492] [ 47.648492] *** DEADLOCK *** Using NVMEoF after this patch seems to finally be stable, without it, rxe eventually deadlocks the whole system and causes RCU stalls. Signed-off-by:
Alexandru Moise <00moses.alexander00@gmail.com> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
-
Mustafa Ismail authored
Use of incorrect structure address for IPv6 neighbor lookup causes connections to IPv6 addresses to fail. Fix this by using correct address in call to dst_neigh_lookup. Fixes: f27b4746 ("i40iw: add connection management code") Signed-off-by:
Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by:
-
Mustafa Ismail authored
If i40iw_allocate_dma_mem fails when creating a QP, the memory allocated for the QP structure using kzalloc is not freed because iwqp->allocated_buffer is used to free the memory and it is not setup until later. Fix this by setting iwqp->allocated_buffer before allocating the dma memory. Fixes: d3749841 ("i40iw: add files for iwarp interface") Signed-off-by:
-
Daria Velikovsky authored
Flow label is defined as u32 in the in ipv6 flow spec, but used internally in the flow specs parsing as u8. That was causing loss of part of flow_label value. Fixes: 2d1e697e ('IB/mlx5: Add support to match inner packet fields') Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Daria Velikovsky <daria@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
User can leave system without medium BlueFlames registers, however the code assumed that at least one such register exists. This patch fixes that assumption. Fixes: c1be5232 ("IB/mlx5: Fix micro UAR allocator") Reported-by:
Rohit Zambre <rzambre@uci.edu> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Michael J. Ruhl authored
A pio send egress error can occur when the PSM library attempts to to send a bad packet. That issue is still being investigated. The pio error interrupt handler then attempts to progress the recovery of the errored pio send context. Code inspection reveals that the handling lacks the necessary locking if that recovery interleaves with a PSM close of the "context" object contains the pio send context. The lack of the locking can cause the recovery to access the already freed pio send context object and incorrectly deduce that the pio send context is actually a kernel pio send context as shown by the NULL deref stack below: [<ffffffff8143d78c>] _dev_info+0x6c/0x90 [<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1] [<ffffffff816ab124>] ? __schedule+0x424/0x9b0 [<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1] [<ffffffff810aa3ba>] process_one_work+0x17a/0x440 [<ffffffff810ab086>] worker_thread+0x126/0x3c0 [<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff810b252f>] kthread+0xcf/0xe0 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 [<ffffffff816b8798>] ret_from_fork+0x58/0x90 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 This is the best case scenario and other scenarios can corrupt the already freed memory. Fix by adding the necessary locking in the pio send context error handler. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
Leon Romanovsky authored
Delete non-existent @mellanox.com addresses from MAINTAINERS file. Signed-off-by:
-
Greg Thelen authored
INFINIBAND_ADDR_TRANS depends on INFINIBAND. So there's no need for options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND. Remove the unnecessary INFINIBAND depends. Signed-off-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
-
- 03 May, 2018 8 commits
-
-
Parav Pandit authored
When commit [1] was added, SGID was queried to derive the SMAC address. Then, later on during a refactor [2], SMAC was no longer needed. However, the now useless GID query remained. Then during additional code changes later on, the GID query was being done in such a way that it caused iWARP queries to start breaking. Remove the useless GID query and resolve the iWARP breakage at the same time. This is discussed in [3]. [1] commit dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures") [2] commit 5c266b23 ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av") [3] https://www.spinics.net/lists/linux-rdma/msg63951.htmlSuggested-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
When the kernel was compiled using the UBSAN option, we saw the following stack trace: [ 1184.827917] UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx4/mr.c:349:27 [ 1184.828114] signed integer overflow: [ 1184.828247] -2147483648 - 1 cannot be represented in type 'int' The problem was caused by calling round_up in procedure mlx4_ib_umem_calc_optimal_mtt_size (on line 349, as noted in the stack trace) with the second parameter (1 << block_shift) (which is an int). The second parameter should have been (1ULL << block_shift) (which is an unsigned long long). (1 << block_shift) is treated by the compiler as an int (because 1 is an integer). Now, local variable block_shift is initialized to 31. If block_shift is 31, 1 << block_shift is 1 << 31 = 0x80000000=-214748368. This is the most negative int value. Inside the round_up macro, there is a cast applied to ((1 << 31) - 1). However, this cast is applied AFTER ((1 << 31) - 1) is calculated. Since (1 << 31) is treated as an int, we get the negative overflow identified by UBSAN in the process of calculating ((1 << 31) - 1). The fix is to change (1 << block_shift) to (1ULL << block_shift) on line 349. Fixes: 9901abf5 ("IB/mlx4: Use optimal numbers of MTT entries") Signed-off-by:
-
Sebastian Sanchez authored
When IRQ affinity is set and the interrupt type is unknown, a cpu mask allocated within the function is never freed. Fix this memory leak by allocating memory within the scope where it is used. Reviewed-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Sebastian Sanchez authored
When allocating device data, if there's an allocation failure, the already allocated memory won't be freed such as per-cpu counters. Fix memory leaks in exception path by creating a common reentrant clean up function hfi1_clean_devdata() to be used at driver unload time and device data allocation failure. To accomplish this, free_platform_config() and clean_up_i2c() are changed to be reentrant to remove dependencies when they are called in different order. This helps avoid NULL pointer dereferences introduced by this patch if those two functions weren't reentrant. In addition, set dd->int_counter, dd->rcv_limit, dd->send_schedule and dd->tx_opstats to NULL after they're freed in hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant. Reviewed-by:
-
Sebastian Sanchez authored
When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
-
Mike Marciniszyn authored
AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2). When the code is trying to send a BECN, the use of the stored header will lose the BECN bit. Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations. Cc: <stable@vger.kernel.org> # 4.14.x Reviewed-by:
-
Michael J. Ruhl authored
The module parameter num_user_context is defined as 'int' and defaults to -1. The module_param_named() says that it is uint. Correct module_param_named() type information and update the modinfo text to reflect the default value. Reviewed-by:
-
Mike Marciniszyn authored
The code for handling a marked UD packet unconditionally returns the dlid in the header of the FECN marked packet. This is not correct for multicast packets where the DLID is in the multicast range. The subsequent attempt to send the CNP with the multicast lid will cause the chip to halt the ack send context because the source lid doesn't match the chip programming. The send context will be halted and flush any other pending packets in the pio ring causing the CNP to not be sent. A part of investigating the fix, it was determined that the 16B work broke the FECN routine badly with inconsistent use of 16 bit and 32 bits types for lids and pkeys. Since the port's source lid was correctly 32 bits the type mixmatches need to be dealt with at the same time as fixing the CNP header issue. Fix these issues by: - Using the ports lid for as the SLID for responding to FECN marked UD packets - Insure pkey is always 16 bit in this and subordinate routines - Insure lids are 32 bits in this and subordinate routines Cc: <stable@vger.kernel.org> # 4.14.x Fixes: 88733e3b ("IB/hfi1: Add 16B UD support") Reviewed-by:
Don Hiatt <don.hiatt@intel.com> Reviewed-by:
-
- 30 Apr, 2018 1 commit
-
-
Håkon Bugge authored
Currently, the kernel protects access to the agent ID allocator on a per port basis using a spinlock, so it is impossible for two apps/threads on the same port to get the same TID, but it is entirely possible for two threads on different ports to end up with the same TID. As this can be confusing (regardless of it being legal according to the IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage), and as the rdma-core user space API for /dev/umad devices implies unique TIDs even across ports, make the TID an atomic type so that no two allocations, regardless of port number, will be the same. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
- 27 Apr, 2018 2 commits
-
-
Bharat Potnuri authored
When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire corresponding QP lock before moving the CQEs into its corresponding SW queue and accessing the SQ contents for completing a WR. Ignore CQEs if corresponding QP is already flushed. Cc: stable@vger.kernel.org Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Ariel Levkovich authored
This patch fixes a crash that happens due to access to an uninitialized DM pointer within the MR object. The change makes sure the DM pointer in the MR object is set to NULL during a non-DM MR creation to prevent a false indication that this MR is related to a DM in the dereg flow. Fixes: be934cca ("IB/uverbs: Add device memory registration ioctl support") Reported-by:
Ariel Levkovich <lariel@mellanox.com> Signed-off-by:
-
