Pull powerpc fix from Michael Ellerman:
 "One fix for a recent change which broke nested KVM guests on Power9.

  Thanks to Alexey Kardashevskiy"

* tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Fix nested guest RC bits update

Pull ARM fixes from Russell King:

 - fix for "hex" Kconfig default to use 0x0 rather than 0 to allow these
   to be removed from defconfigs

 - fix from Ard Biesheuvel for EFI HYP mode booting

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully
  ARM: 8984/1: Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0

Pull OpenRISC update from Stafford Horne:
 "One patch found wile I was getting the glibc port ready: fix issue
  with clone TLS arg getting overwritten"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: Fix issue with argument clobbering for clone/fork

Pull alpha updates from Matt Turner:
 "A few changes for alpha. They're mostly small janitorial fixes but
  there's also a build fix and most notably a patch from Mikulas that
  fixes a hang on boot on the Avanti platform, which required quite a
  bit of work and review"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Fix build around srm_sysrq_reboot_op
  alpha: c_next should increase position index
  alpha: Replace sg++ with sg = sg_next(sg)
  alpha: fix memory barriers so that they conform to the specification
  alpha: remove unneeded semicolon in sys_eiger.c
  alpha: remove unneeded semicolon in osf_sys.c
  alpha: Replace strncmp with str_has_prefix
  alpha: fix rtc port ranges
  alpha: Kconfig: pedantic formatting

Pull x86 RAS updates from Thomas Gleixner:
 "RAS updates from Borislav Petkov:

   - Unmap a whole guest page if an MCE is encountered in it to avoid
     follow-on MCEs leading to the guest crashing, by Tony Luck.

     This change collided with the entry changes and the merge
     resolution would have been rather unpleasant. To avoid that the
     entry branch was merged in before applying this. The resulting code
     did not change over the rebase.

   - AMD MCE error thresholding machinery cleanup and hotplug
     sanitization, by Thomas Gleixner.

   - Change the MCE notifiers to denote whether they have handled the
     error and not break the chain early by returning NOTIFY_STOP, thus
     giving the opportunity for the later handlers in the chain to see
     it. By Tony Luck.

   - Add AMD family 0x17, models 0x60-6f support, by Alexander Monakov.

   - Last but not least, the usual round of fixes and improvements"

* tag 'ras-core-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/mce/dev-mcelog: Fix -Wstringop-truncation warning about strncpy()
  x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned
  EDAC/amd64: Add AMD family 17h model 60h PCI IDs
  hwmon: (k10temp) Add AMD family 17h model 60h PCI match
  x86/amd_nb: Add AMD family 17h model 60h PCI IDs
  x86/mcelog: Add compat_ioctl for 32-bit mcelog support
  x86/mce: Drop bogus comment about mce.kflags
  x86/mce: Fixup exception only for the correct MCEs
  EDAC: Drop the EDAC report status checks
  x86/mce: Add mce=print_all option
  x86/mce: Change default MCE logger to check mce->kflags
  x86/mce: Fix all mce notifiers to update the mce->kflags bitmask
  x86/mce: Add a struct mce.kflags field
  x86/mce: Convert the CEC to use the MCE notifier
  x86/mce: Rename "first" function as "early"
  x86/mce/amd, edac: Remove report_gart_errors
  x86/mce/amd: Make threshold bank setting hotplug robust
  x86/mce/amd: Cleanup threshold device remove path
  x86/mce/amd: Straighten CPU hotplug path
  x86/mce/amd: Sanitize thresholding device creation hotplug path
  ...

Pull x86 entry updates from Thomas Gleixner:
 "The x86 entry, exception and interrupt code rework

  This all started about 6 month ago with the attempt to move the Posix
  CPU timer heavy lifting out of the timer interrupt code and just have
  lockless quick checks in that code path. Trivial 5 patches.

  This unearthed an inconsistency in the KVM handling of task work and
  the review requested to move all of this into generic code so other
  architectures can share.

  Valid request and solved with another 25 patches but those unearthed
  inconsistencies vs. RCU and instrumentation.

  Digging into this made it obvious that there are quite some
  inconsistencies vs. instrumentation in general. The int3 text poke
  handling in particular was completely unprotected and with the batched
  update of trace events even more likely to expose to endless int3
  recursion.

  In parallel the RCU implications of instrumenting fragile entry code
  came up in several discussions.

  The conclusion of the x86 maintainer team was to go all the way and
  make the protection against any form of instrumentation of fragile and
  dangerous code pathes enforcable and verifiable by tooling.

  A first batch of preparatory work hit mainline with commit
  d5f744f9 ("Pull x86 entry code updates from Thomas Gleixner")

  That (almost) full solution introduced a new code section
  '.noinstr.text' into which all code which needs to be protected from
  instrumentation of all sorts goes into. Any call into instrumentable
  code out of this section has to be annotated. objtool has support to
  validate this.

  Kprobes now excludes this section fully which also prevents BPF from
  fiddling with it and all 'noinstr' annotated functions also keep
  ftrace off. The section, kprobes and objtool changes are already
  merged.

  The major changes coming with this are:

    - Preparatory cleanups

    - Annotating of relevant functions to move them into the
      noinstr.text section or enforcing inlining by marking them
      __always_inline so the compiler cannot misplace or instrument
      them.

    - Splitting and simplifying the idtentry macro maze so that it is
      now clearly separated into simple exception entries and the more
      interesting ones which use interrupt stacks and have the paranoid
      handling vs. CR3 and GS.

    - Move quite some of the low level ASM functionality into C code:

       - enter_from and exit to user space handling. The ASM code now
         calls into C after doing the really necessary ASM handling and
         the return path goes back out without bells and whistels in
         ASM.

       - exception entry/exit got the equivivalent treatment

       - move all IRQ tracepoints from ASM to C so they can be placed as
         appropriate which is especially important for the int3
         recursion issue.

    - Consolidate the declaration and definition of entry points between
      32 and 64 bit. They share a common header and macros now.

    - Remove the extra device interrupt entry maze and just use the
      regular exception entry code.

    - All ASM entry points except NMI are now generated from the shared
      header file and the corresponding macros in the 32 and 64 bit
      entry ASM.

    - The C code entry points are consolidated as well with the help of
      DEFINE_IDTENTRY*() macros. This allows to ensure at one central
      point that all corresponding entry points share the same
      semantics. The actual function body for most entry points is in an
      instrumentable and sane state.

      There are special macros for the more sensitive entry points, e.g.
      INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
      They allow to put the whole entry instrumentation and RCU handling
      into safe places instead of the previous pray that it is correct
      approach.

    - The INT3 text poke handling is now completely isolated and the
      recursion issue banned. Aside of the entry rework this required
      other isolation work, e.g. the ability to force inline bsearch.

    - Prevent #DB on fragile entry code, entry relevant memory and
      disable it on NMI, #MC entry, which allowed to get rid of the
      nested #DB IST stack shifting hackery.

    - A few other cleanups and enhancements which have been made
      possible through this and already merged changes, e.g.
      consolidating and further restricting the IDT code so the IDT
      table becomes RO after init which removes yet another popular
      attack vector

    - About 680 lines of ASM maze are gone.

  There are a few open issues:

   - An escape out of the noinstr section in the MCE handler which needs
     some more thought but under the aspect that MCE is a complete
     trainwreck by design and the propability to survive it is low, this
     was not high on the priority list.

   - Paravirtualization

     When PV is enabled then objtool complains about a bunch of indirect
     calls out of the noinstr section. There are a few straight forward
     ways to fix this, but the other issues vs. general correctness were
     more pressing than parawitz.

   - KVM

     KVM is inconsistent as well. Patches have been posted, but they
     have not yet been commented on or picked up by the KVM folks.

   - IDLE

     Pretty much the same problems can be found in the low level idle
     code especially the parts where RCU stopped watching. This was
     beyond the scope of the more obvious and exposable problems and is
     on the todo list.

  The lesson learned from this brain melting exercise to morph the
  evolved code base into something which can be validated and understood
  is that once again the violation of the most important engineering
  principle "correctness first" has caused quite a few people to spend
  valuable time on problems which could have been avoided in the first
  place. The "features first" tinkering mindset really has to stop.

  With that I want to say thanks to everyone involved in contributing to
  this effort. Special thanks go to the following people (alphabetical
  order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian
  Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai
  Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra,
  Vitaly Kuznetsov, and Will Deacon"

* tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits)
  x86/entry: Force rcu_irq_enter() when in idle task
  x86/entry: Make NMI use IDTENTRY_RAW
  x86/entry: Treat BUG/WARN as NMI-like entries
  x86/entry: Unbreak __irqentry_text_start/end magic
  x86/entry: __always_inline CR2 for noinstr
  lockdep: __always_inline more for noinstr
  x86/entry: Re-order #DB handler to avoid *SAN instrumentation
  x86/entry: __always_inline arch_atomic_* for noinstr
  x86/entry: __always_inline irqflags for noinstr
  x86/entry: __always_inline debugreg for noinstr
  x86/idt: Consolidate idt functionality
  x86/idt: Cleanup trap_init()
  x86/idt: Use proper constants for table size
  x86/idt: Add comments about early #PF handling
  x86/idt: Mark init only functions __init
  x86/entry: Rename trace_hardirqs_off_prepare()
  x86/entry: Clarify irq_{enter,exit}_rcu()
  x86/entry: Remove DBn stacks
  x86/entry: Remove debug IDT frobbing
  x86/entry: Optimize local_db_save() for virt
  ...

Merge tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull notification queue from David Howells:
 "This adds a general notification queue concept and adds an event
  source for keys/keyrings, such as linking and unlinking keys and
  changing their attributes.

  Thanks to Debarshi Ray, we do have a pull request to use this to fix a
  problem with gnome-online-accounts - as mentioned last time:

     https://gitlab.gnome.org/GNOME/gnome-online-accounts/merge_requests/47

  Without this, g-o-a has to constantly poll a keyring-based kerberos
  cache to find out if kinit has changed anything.

  [ There are other notification pending: mount/sb fsinfo notifications
    for libmount that Karel Zak and Ian Kent have been working on, and
    Christian Brauner would like to use them in lxc, but let's see how
    this one works first ]

  LSM hooks are included:

   - A set of hooks are provided that allow an LSM to rule on whether or
     not a watch may be set. Each of these hooks takes a different
     "watched object" parameter, so they're not really shareable. The
     LSM should use current's credentials. [Wanted by SELinux & Smack]

   - A hook is provided to allow an LSM to rule on whether or not a
     particular message may be posted to a particular queue. This is
     given the credentials from the event generator (which may be the
     system) and the watch setter. [Wanted by Smack]

  I've provided SELinux and Smack with implementations of some of these
  hooks.

  WHY
  ===

  Key/keyring notifications are desirable because if you have your
  kerberos tickets in a file/directory, your Gnome desktop will monitor
  that using something like fanotify and tell you if your credentials
  cache changes.

  However, we also have the ability to cache your kerberos tickets in
  the session, user or persistent keyring so that it isn't left around
  on disk across a reboot or logout. Keyrings, however, cannot currently
  be monitored asynchronously, so the desktop has to poll for it - not
  so good on a laptop. This facility will allow the desktop to avoid the
  need to poll.

  DESIGN DECISIONS
  ================

   - The notification queue is built on top of a standard pipe. Messages
     are effectively spliced in. The pipe is opened with a special flag:

        pipe2(fds, O_NOTIFICATION_PIPE);

     The special flag has the same value as O_EXCL (which doesn't seem
     like it will ever be applicable in this context)[?]. It is given up
     front to make it a lot easier to prohibit splice&co from accessing
     the pipe.

     [?] Should this be done some other way?  I'd rather not use up a new
         O_* flag if I can avoid it - should I add a pipe3() system call
         instead?

     The pipe is then configured::

        ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, queue_depth);
        ioctl(fds[1], IOC_WATCH_QUEUE_SET_FILTER, &filter);

     Messages are then read out of the pipe using read().

   - It should be possible to allow write() to insert data into the
     notification pipes too, but this is currently disabled as the
     kernel has to be able to insert messages into the pipe *without*
     holding pipe->mutex and the code to make this work needs careful
     auditing.

   - sendfile(), splice() and vmsplice() are disabled on notification
     pipes because of the pipe->mutex issue and also because they
     sometimes want to revert what they just did - but one or more
     notification messages might've been interleaved in the ring.

   - The kernel inserts messages with the wait queue spinlock held. This
     means that pipe_read() and pipe_write() have to take the spinlock
     to update the queue pointers.

   - Records in the buffer are binary, typed and have a length so that
     they can be of varying size.

     This allows multiple heterogeneous sources to share a common
     buffer; there are 16 million types available, of which I've used
     just a few, so there is scope for others to be used. Tags may be
     specified when a watchpoint is created to help distinguish the
     sources.

   - Records are filterable as types have up to 256 subtypes that can be
     individually filtered. Other filtration is also available.

   - Notification pipes don't interfere with each other; each may be
     bound to a different set of watches. Any particular notification
     will be copied to all the queues that are currently watching for it
     - and only those that are watching for it.

   - When recording a notification, the kernel will not sleep, but will
     rather mark a queue as having lost a message if there's
     insufficient space. read() will fabricate a loss notification
     message at an appropriate point later.

   - The notification pipe is created and then watchpoints are attached
     to it, using one of:

        keyctl_watch_key(KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
        watch_mount(AT_FDCWD, "/", 0, fd, 0x02);
        watch_sb(AT_FDCWD, "/mnt", 0, fd, 0x03);

     where in both cases, fd indicates the queue and the number after is
     a tag between 0 and 255.

   - Watches are removed if either the notification pipe is destroyed or
     the watched object is destroyed. In the latter case, a message will
     be generated indicating the enforced watch removal.

  Things I want to avoid:

   - Introducing features that make the core VFS dependent on the
     network stack or networking namespaces (ie. usage of netlink).

   - Dumping all this stuff into dmesg and having a daemon that sits
     there parsing the output and distributing it as this then puts the
     responsibility for security into userspace and makes handling
     namespaces tricky. Further, dmesg might not exist or might be
     inaccessible inside a container.

   - Letting users see events they shouldn't be able to see.

  TESTING AND MANPAGES
  ====================

   - The keyutils tree has a pipe-watch branch that has keyctl commands
     for making use of notifications. Proposed manual pages can also be
     found on this branch, though a couple of them really need to go to
     the main manpages repository instead.

     If the kernel supports the watching of keys, then running "make
     test" on that branch will cause the testing infrastructure to spawn
     a monitoring process on the side that monitors a notifications pipe
     for all the key/keyring changes induced by the tests and they'll
     all be checked off to make sure they happened.

        https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log/?h=pipe-watch

   - A test program is provided (samples/watch_queue/watch_test) that
     can be used to monitor for keyrings, mount and superblock events.
     Information on the notifications is simply logged to stdout"

* tag 'notifications-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  smack: Implement the watch_key and post_notification hooks
  selinux: Implement the watch_key security hook
  keys: Make the KEY_NEED_* perms an enum rather than a mask
  pipe: Add notification lossage handling
  pipe: Allow buffers to be marked read-whole-or-error for notifications
  Add sample notification program
  watch_queue: Add a key/keyring notification facility
  security: Add hooks to rule on setting a watch
  pipe: Add general notification queue support
  pipe: Add O_NOTIFICATION_PIPE
  security: Add a hook for the point of notification insertion
  uapi: General notification queue definitions

EFI on ARM only supports short descriptors, and given that it mandates
that the MMU and caches are on, it is implied that booting in HYP mode
is not supported.

However, implementations of EFI exist (i.e., U-Boot) that ignore this
requirement, which is not entirely unreasonable, given that it makes
HYP mode inaccessible to the operating system.

So let's make sure that we can deal with this condition gracefully.
We already tolerate booting the EFI stub with the caches off (even
though this violates the EFI spec as well), and so we should deal
with HYP mode boot with MMU and caches either on or off.

- When the MMU and caches are on, we can ignore the HYP stub altogether,
  since we can carry on executing at HYP. We do need to ensure that we
  disable the MMU at HYP before entering the kernel proper.

- When the MMU and caches are off, we have to drop to SVC mode so that
  we can set up the page tables using short descriptors. In this case,
  we need to install the HYP stub as usual, so that we can return to HYP
  mode before handing over to the kernel proper.
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

ZBOOT_ROM_TEXT and ZBOOT_ROM_BSS are defined as 'hex' but had a default
of "0". Kconfig will helpfully expand a text entry of 0 to 0x0 but
because this is not the same as the default value it was treated as
being explicitly set when running 'make savedefconfig' so most arm
defconfigs have CONFIG_ZBOOT_ROM_TEXT=0x0 and CONFIG_ZBOOT_ROM_BSS=0x0.

Change the default to 0x0 which will mean next time the defconfigs are
re-generated the spurious config entries will be removed.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

The patch introducing the struct was probably never compile tested,
because it sets a handler with a wrong function signature. Wrap the
handler into a functions with the correct signature to fix the build.

Fixes: 0f1c9688 ("tty/sysrq: alpha: export and use __sysrq_get_key_op()")
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Signed-off-by: Matt Turner <mattst88@gmail.com>

Replace sg++ with sg = sg_next(sg).
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The commits cd0e00c1 and 92d7223a broke boot on the Alpha Avanti
platform. The patches move memory barriers after a write before the write.
The result is that if there's iowrite followed by ioread, there is no
barrier between them.

The Alpha architecture allows reordering of the accesses to the I/O space,
and the missing barrier between write and read causes hang with serial
port and real time clock.

This patch makes barriers confiorm to the specification.

1. We add mb() before readX_relaxed and writeX_relaxed -
   memory-barriers.txt claims that these functions must be ordered w.r.t.
   each other. Alpha doesn't order them, so we need an explicit barrier.
2. We add mb() before reads from the I/O space - so that if there's a
   write followed by a read, there should be a barrier between them.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: cd0e00c1 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering")
Fixes: 92d7223a ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering #2")
Cc: stable@vger.kernel.org      # v4.17+
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Fix the following coccicheck warning:

arch/alpha/kernel/sys_eiger.c:179:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Fix the following coccicheck warning:

arch/alpha/kernel/osf_sys.c:680:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

In commit b6b27355
("tracing: Use str_has_prefix() instead of using fixed sizes")
the newly introduced str_has_prefix() was used
to replace error-prone strncmp(str, const, len).
Here fix codes with the same pattern.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Alpha incorrectly reports "0070-0080 : rtc" in /proc/ioports.
Fix this, so that it is "0070-007f".
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Formatting of Kconfig files doesn't look so pretty, so let the
Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Pull thermal updates from Daniel Lezcano:

 - Add the hwmon support on the i.MX SC (Anson Huang)

 - Thermal framework cleanups (self-encapsulation, pointless stubs,
   private structures) (Daniel Lezcano)

 - Use the PM QoS frequency changes for the devfreq cooling device
   (Matthias Kaehlcke)

 - Remove duplicate error messages from platform_get_irq() error
   handling (Markus Elfring)

 - Add support for the bandgap sensors (Keerthy)

 - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz)

 - Add Renesas R-Car maintainer entry (Niklas Söderlund)

 - Fix error checking after calling ti_bandgap_get_sensor_data() for the
   TI SoC thermal (Sudip Mukherjee)

 - Add latency constraint for the idle injection, the DT binding and the
   change the registering function (Daniel Lezcano)

 - Convert the thermal framework binding to the Yaml schema (Amit
   Kucheria)

 - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A.
   R. Silva)

 - Thermal framework cleanups (alphabetic order for heads, replace
   module.h by export.h, make file naming consistent) (Amit Kucheria)

 - Merge tsens-common into the tsens driver (Amit Kucheria)

 - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven)

 - Clean up the rcar_thermal_update_temp() function in the rcar thermal
   driver (Niklas Söderlund)

 - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian
   Tang)

 - Export GDDV, OEM vendor variables, and don't require IDSP for the
   int340x thermal driver - trivial conflicts fixed (Matthew Garrett)

* tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits)
  thermal/int340x_thermal: Don't require IDSP to exist
  thermal/int340x_thermal: Export OEM vendor variables
  thermal/int340x_thermal: Export GDDV
  thermal: qoriq: Update the settings for TMUv2
  thermal: rcar_thermal: Clean up rcar_thermal_update_temp()
  thermal: qoriq: Add platform dependencies
  drivers: thermal: tsens: Merge tsens-common.c into tsens.c
  thermal/of: Rename of-thermal.c
  thermal/governors: Prefix all source files with gov_
  thermal/drivers/user_space: Sort headers alphabetically
  thermal/drivers/of-thermal: Sort headers alphabetically
  thermal/drivers/cpufreq_cooling: Replace module.h with export.h
  thermal/drivers/cpufreq_cooling: Sort headers alphabetically
  thermal/drivers/clock_cooling: Include export.h
  thermal/drivers/clock_cooling: Sort headers alphabetically
  thermal/drivers/thermal_hwmon: Include export.h
  thermal/drivers/thermal_hwmon: Sort headers alphabetically
  thermal/drivers/thermal_helpers: Include export.h
  thermal/drivers/thermal_helpers: Sort headers alphabetically
  thermal/core: Replace module.h with export.h
  ...

Pull proc fix from Eric Biederman:
 "Much to my surprise syzbot found a very old bug in proc that the
  recent changes made easier to reproce. This bug is subtle enough it
  looks like it fooled everyone who should know better"

* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Use new_inode not new_inode_pseudo

The idea of conditionally calling into rcu_irq_enter() only when RCU is
not watching turned out to be not completely thought through.

Paul noticed occasional premature end of grace periods in RCU torture
testing. Bisection led to the commit which made the invocation of
rcu_irq_enter() conditional on !rcu_is_watching().

It turned out that this conditional breaks RCU assumptions about the idle
task when the scheduler tick happens to be a nested interrupt. Nested
interrupts can happen when the first interrupt invokes softirq processing
on return which enables interrupts.

If that nested tick interrupt does not invoke rcu_irq_enter() then the
RCU's irq-nesting checks will believe that this interrupt came directly
from idle, which will cause RCU to report a quiescent state.  Because this
interrupt instead came from a softirq handler which might have been
executing an RCU read-side critical section, this can cause the grace
period to end prematurely.

Change the condition from !rcu_is_watching() to is_idle_task(current) which
enforces that interrupts in the idle task unconditionally invoke
rcu_irq_enter() independent of the RCU state.

This is also correct vs. user mode entries in NOHZ full scenarios because
user mode entries bring RCU out of EQS and force the RCU irq nesting state
accounting to nested. As only the first interrupt can enter from user mode
a nested tick interrupt will enter from kernel mode and as the nesting
state accounting is forced to nesting it will not do anything stupid even
if rcu_irq_enter() has not been invoked.

Fixes: 3eeec385 ("x86/entry: Provide idtentry_entry/exit_cond_rcu()")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/87wo4cxubv.fsf@nanos.tec.linutronix.de

Merge tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "Nothing too exciting for this cycle. A couple of fixes across the
  board, and Lee volunteered to help with patch review"

* tag 'pwm/for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Add missing "CONFIG_" prefix
  MAINTAINERS: Add Lee Jones as reviewer for the PWM subsystem
  pwm: imx27: Fix rounding behavior
  pwm: rockchip: Simplify rockchip_pwm_get_state()
  pwm: img: Call pm_runtime_put() in pm_runtime_get_sync() failed case
  pwm: tegra: Support dynamic clock frequency configuration
  pwm: jz4740: Add support for the JZ4725B
  pwm: jz4740: Make PWM start with the active part
  pwm: jz4740: Enhance precision in calculation of duty cycle
  pwm: jz4740: Drop dependency on MACH_INGENIC
  pwm: lpss: Fix get_state runtime-pm reference handling
  pwm: sun4i: Support direct clock output on Allwinner A64
  pwm: Add support for Azoteq IQS620A PWM generator
  dt-bindings: pwm: rcar: add r8a77961 support
  pwm: Add missing '\n' in log messages

Pull iommu driver directory structure cleanup from Joerg Roedel:
 "Move the Intel and AMD IOMMU drivers into their own subdirectory.

  Both drivers consist of several files by now and giving them their own
  directory unclutters the IOMMU top-level directory a bit"

* tag 'iommu-drivers-move-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Move Intel IOMMU driver into subdirectory
  iommu/amd: Move AMD IOMMU driver into subdirectory

Pull printk fix from Petr Mladek:
 "One more printk change for 5.8: make sure that messages printed from
  KDB context are redirected to KDB console handlers. It did not work
  when KDB interrupted NMI or printk_safe contexts.

  Arm people started hitting this problem more often recently. I forgot
  to add the fix into the previous pull request by mistake"

* tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk/kdb: Redirect printk messages into kdb in any context

Recently syzbot reported that unmounting proc when there is an ongoing
inotify watch on the root directory of proc could result in a use
after free when the watch is removed after the unmount of proc
when the watcher exits.

Commit 69879c01 ("proc: Remove the now unnecessary internal mount
of proc") made it easier to unmount proc and allowed syzbot to see the
problem, but looking at the code it has been around for a long time.

Looking at the code the fsnotify watch should have been removed by
fsnotify_sb_delete in generic_shutdown_super.  Unfortunately the inode
was allocated with new_inode_pseudo instead of new_inode so the inode
was not on the sb->s_inodes list.  Which prevented
fsnotify_unmount_inodes from finding the inode and removing the watch
as well as made it so the "VFS: Busy inodes after unmount" warning
could not find the inodes to warn about them.

Make all of the inodes in proc visible to generic_shutdown_super,
and fsnotify_sb_delete by using new_inode instead of new_inode_pseudo.
The only functional difference is that new_inode places the inodes
on the sb->s_inodes list.

I wrote a small test program and I can verify that without changes it
can trigger this issue, and by replacing new_inode_pseudo with
new_inode the issues goes away.

Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/000000000000d788c905a7dfa3f4@google.com
Reported-by: syzbot+7d2debdcdb3cb93c1e5e@syzkaller.appspotmail.com
Fixes: 0097875b ("proc: Implement /proc/thread-self to point at the directory of the current thread")
Fixes: 021ada7d ("procfs: switch /proc/self away from proc_dir_entry")
Fixes: 51f0885e ("vfs,proc: guarantee unique inodes in /proc")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Merge tag 'integrity-v5.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity fix from Mimi Zohar:
 "ima mprotect performance fix"

* tag 'integrity-v5.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: fix mprotect checking

Pull Devicetree fixes from Rob Herring:

 - Another round of whack-a-mole removing 'allOf', redundant cases of
   'maxItems' and incorrect 'reg' sizes

 - Fix support for yaml.h in non-standard paths

* tag 'devicetree-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: Remove redundant 'maxItems'
  dt-bindings: Fix more incorrect 'reg' property sizes in examples
  dt-bindings: phy: qcom: Fix missing 'ranges' and example addresses
  dt-bindings: Remove more cases of 'allOf' containing a '$ref'
  scripts/dtc: use pkg-config to include <yaml.h> in non-standard path

Pull nios2 update from Ley Foon Tan:
 "Mark expected switch fall-through in signal handling"

* tag 'nios2-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: signal: Mark expected switch fall-through

Pull more KVM updates from Paolo Bonzini:
 "The guest side of the asynchronous page fault work has been delayed to
  5.9 in order to sync with Thomas's interrupt entry rework, but here's
  the rest of the KVM updates for this merge window.

  MIPS:
   - Loongson port

  PPC:
   - Fixes

  ARM:
   - Fixes

  x86:
   - KVM_SET_USER_MEMORY_REGION optimizations
   - Fixes
   - Selftest fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
  KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
  KVM: selftests: fix sync_with_host() in smm_test
  KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
  KVM: async_pf: Cleanup kvm_setup_async_pf()
  kvm: i8254: remove redundant assignment to pointer s
  KVM: x86: respect singlestep when emulating instruction
  KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
  KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
  KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
  KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
  KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
  KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
  KVM: arm64: Remove host_cpu_context member from vcpu structure
  KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
  KVM: arm64: Handle PtrAuth traps early
  KVM: x86: Unexport x86_fpu_cache and make it static
  KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
  KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
  KVM: arm64: Stop save/restoring ACTLR_EL1
  KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
  ...

Pull xen updates from Juergen Gross:

 - several smaller cleanups

 - a fix for a Xen guest regression with CPU offlining

 - a small fix in the xen pvcalls backend driver

 - an update of MAINTAINERS

* tag 'for-linus-5.8b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE
  xen/pci: Get rid of verbose_request and use dev_dbg() instead
  xenbus: Use dev_printk() when possible
  xen-pciback: Use dev_printk() when possible
  xen: enable BALLOON_MEMORY_HOTPLUG by default
  xen: expand BALLOON_MEMORY_HOTPLUG description
  xen/pvcalls: Make pvcalls_back_global static
  xen/cpuhotplug: Fix initial CPU offlining for PV(H) guests
  xen-platform: Constify dev_pm_ops
  xen/pvcalls-back: test for errors when calling backend_connect()

There's no need to specify 'maxItems' with the same value as the number
of entries in 'items'. A meta-schema update will catch future cases.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-pwm@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clk
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Make sure IMA is enabled before checking mprotect change.  Addresses
report of a 3.7% regression of boot-time.dhcp.

Fixes: 8eb613c0 ("ima: verify mprotect change is consistent with mmap policy")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Tested-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>

For no reason other than beginning brainmelt, IDTENTRY_NMI was mapped to
IDTENTRY_IST.

This is not a problem on 64bit because the IST default entry point maps to
IDTENTRY_RAW which does not any entry handling. The surplus function
declaration for the noist C entry point is unused and as there is no ASM
code emitted for NMI this went unnoticed.

On 32bit IDTENTRY_IST maps to a regular IDTENTRY which does the normal
entry handling. That is clearly the wrong thing to do for NMI.

Map it to IDTENTRY_RAW to unbreak it. The IDTENTRY_NMI mapping needs to
stay to avoid emitting ASM code.

Fixes: 6271fef0 ("x86/entry: Convert NMI to IDTENTRY_NMI")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Debugged-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/CA+G9fYvF3cyrY+-iw_SZtpN-i2qA2BruHg4M=QYECU2-dNdsMw@mail.gmail.com

BUG/WARN are cleverly optimized using UD2 to handle the BUG/WARN out of
line in an exception fixup.

But if BUG or WARN is issued in a funny RCU context, then the
idtentry_enter...() path might helpfully WARN that the RCU context is
invalid, which results in infinite recursion.

Split the BUG/WARN handling into an nmi_enter()/nmi_exit() path in
exc_invalid_op() to increase the chance to survive the experience.

[ tglx: Make the declaration match the implementation ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f8fe40e0088749734b4435b554f73eee53dcf7a8.1591932307.git.luto@kernel.org

Before commit 6cdf3037 ("powerpc/kvm/book3s: Use kvm helpers
to walk shadow or secondary table") we called __find_linux_pte() with
a page table pointer from a kvm_nested_guest struct but
now we rely on kvmhv_find_nested() which takes an L1 LPID and returns
a kvm_nested_guest pointer, however we pass a L0 LPID there and
the L2 guest hangs.

This fixes the LPID passed to kvmppc_hv_handle_set_rc().

Fixes: 6cdf3037 ("powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611030559.75257-1-aik@ozlabs.ru

Mark switch cases where we are expecting to fall through.

Fix the following warning through the use of the new the new
pseudo-keyword fallthrough;

arch/nios2/kernel/signal.c:254:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
  254 |    restart = -2;
      |    ~~~~~~~~^~~~
arch/nios2/kernel/signal.c:255:3: note: here
  255 |   case ERESTARTNOHAND:
      |   ^~~~
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

Pull the Kernel Concurrency Sanitizer from Thomas Gleixner:
 "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector,
  which relies on compile-time instrumentation, and uses a
  watchpoint-based sampling approach to detect races.

  The feature was under development for quite some time and has already
  found legitimate bugs.

  Unfortunately it comes with a limitation, which was only understood
  late in the development cycle:

     It requires an up to date CLANG-11 compiler

  CLANG-11 is not yet released (scheduled for June), but it's the only
  compiler today which handles the kernel requirements and especially
  the annotations of functions to exclude them from KCSAN
  instrumentation correctly.

  These annotations really need to work so that low level entry code and
  especially int3 text poke handling can be completely isolated.

  A detailed discussion of the requirements and compiler issues can be
  found here:

    https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/

  We came to the conclusion that trying to work around compiler
  limitations and bugs again would end up in a major trainwreck, so
  requiring a working compiler seemed to be the best choice.

  For Continous Integration purposes the compiler restriction is
  manageable and that's where most xxSAN reports come from.

  For a change this limitation might make GCC people actually look at
  their bugs. Some issues with CSAN in GCC are 7 years old and one has
  been 'fixed' 3 years ago with a half baken solution which 'solved' the
  reported issue but not the underlying problem.

  The KCSAN developers also ponder to use a GCC plugin to become
  independent, but that's not something which will show up in a few
  days.

  Blocking KCSAN until wide spread compiler support is available is not
  a really good alternative because the continuous growth of lockless
  optimizations in the kernel demands proper tooling support"

* tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits)
  compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining
  compiler.h: Move function attributes to compiler_types.h
  compiler.h: Avoid nested statement expression in data_race()
  compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE()
  kcsan: Update Documentation to change supported compilers
  kcsan: Remove 'noinline' from __no_kcsan_or_inline
  kcsan: Pass option tsan-instrument-read-before-write to Clang
  kcsan: Support distinguishing volatile accesses
  kcsan: Restrict supported compilers
  kcsan: Avoid inserting __tsan_func_entry/exit if possible
  ubsan, kcsan: Don't combine sanitizer with kcov on clang
  objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn()
  kcsan: Add __kcsan_{enable,disable}_current() variants
  checkpatch: Warn about data_race() without comment
  kcsan: Use GFP_ATOMIC under spin lock
  Improve KCSAN documentation a bit
  kcsan: Make reporting aware of KCSAN tests
  kcsan: Fix function matching in report
  kcsan: Change data_race() to no longer require marking racing accesses
  kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h
  ...

Pull atomics rework from Thomas Gleixner:
 "Peter Zijlstras rework of atomics and fallbacks. This solves two
  problems:

   1) Compilers uninline small atomic_* static inline functions which
      can expose them to instrumentation.

   2) The instrumentation of atomic primitives was done at the
      architecture level while composites or fallbacks were provided at
      the generic level. As a result there are no uninstrumented
      variants of the fallbacks.

  Both issues were in the way of fully isolating fragile entry code
  pathes and especially the text poke int3 handler which is prone to an
  endless recursion problem when anything in that code path is about to
  be instrumented. This was always a problem, but got elevated due to
  the new batch mode updates of tracing.

  The solution is to mark the functions __always_inline and to flip the
  fallback and instrumentation so the non-instrumented variants are at
  the architecture level and the instrumentation is done in generic
  code.

  The latter introduces another fallback variant which will go away once
  all architectures have been moved over to arch_atomic_*"

* tag 'locking-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomics: Flip fallbacks and instrumentation
  asm-generic/atomic: Use __always_inline for fallback wrappers

Pull updates from Andrew Morton:
 "A few fixes and stragglers.

  Subsystems affected by this patch series: mm/memory-failure, ocfs2,
  lib/lzo, misc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  amdgpu: a NULL ->mm does not mean a thread is a kthread
  lib/lzo: fix ambiguous encoding bug in lzo-rle
  ocfs2: fix build failure when TCP/IP is disabled
  mm/memory-failure: send SIGBUS(BUS_MCEERR_AR) only to current thread
  mm/memory-failure: prioritize prctl(PR_MCE_KILL) over vm.memory_failure_early_kill