This method changes x86 to add a breakpoint to the mcount locations
instead of calling stop machine.

Now that iret can be handled by NMIs, we perform the following to
update code:

1) Add a breakpoint to all locations that will be modified

2) Sync all cores

3) Update all locations to be either a nop or call (except breakpoint
   op)

4) Sync all cores

5) Remove the breakpoint with the new code.

6) Sync all cores

[
  Added updates that Masami suggested:
   Use unlikely(modifying_ftrace_code) in int3 trap to keep kprobes efficient.
   Don't use NOTIFY_* in ftrace handler in int3 as it is not a notifier.
]

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a debugfs entry under per_cpu/ folder for each cpu called
buffer_size_kb to control the ring buffer size for each CPU
independently.

If the global file buffer_size_kb is used to set size, the individual
ring buffers will be adjusted to the given size. The buffer_size_kb will
report the common size to maintain backward compatibility.

If the buffer_size_kb file under the per_cpu/ directory is used to
change buffer size for a specific CPU, only the size of the respective
ring buffer is updated. When tracing/buffer_size_kb is read, it reports
'X' to indicate that sizes of per_cpu ring buffers are not equivalent.

Link: http://lkml.kernel.org/r/1328212844-11889-1-git-send-email-vnagarnaik@google.com

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Justin Teravest <teravest@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

memcpy() returns a pointer to "bug".  Hopefully, it's not NULL here or
we would already have Oopsed.

Link: http://lkml.kernel.org/r/20120420063145.GA22649@elgon.mountain

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently, trace_printk() uses a single buffer to write into
to calculate the size and format needed to save the trace. To
do this safely in an SMP environment, a spin_lock() is taken
to only allow one writer at a time to the buffer. But this could
also affect what is being traced, and add synchronization that
would not be there otherwise.

Ideally, using percpu buffers would be useful, but since trace_printk()
is only used in development, having per cpu buffers for something
never used is a waste of space. Thus, the use of the trace_bprintk()
format section is changed to be used for static fmts as well as dynamic ones.
Then at boot up, we can check if the section that holds the trace_printk
formats is non-empty, and if it does contain something, then we
know a trace_printk() has been added to the kernel. At this time
the trace_printk per cpu buffers are allocated. A check is also
done at module load time in case a module is added that contains a
trace_printk().

Once the buffers are allocated, they are never freed. If you use
a trace_printk() then you should know what you are doing.

A buffer is made for each type of context:

  normal
  softirq
  irq
  nmi

The context is checked and the appropriate buffer is used.
This allows for totally lockless usage of trace_printk(),
and they no longer even disable interrupts.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge Linux 3.4-rc2: we were on v3.3, update the base.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Fixes and improvements for perf/core:

. Overhaul the tools/ makefiles, gluing them to the top level Makefile, from
  Borislav Petkov.

. Move the UI files from tools/perf/util/ui/ to tools/perf/ui/. Also move
  the GTK+ browser to tools/perf/ui/gtk/, from Namhyung Kim.

. Only fallback to sw cycles counter on ENOENT for the hw cycles, from
  Robert Richter

. Trivial fixes from Robert Richter

. Handle the autogenerated bison/flex files better, from Namhyung and Jiri Olsa.

. Navigate jump instructions in the annotate browser, just press enter or ->,
  still needs support for a jump navigation history, i.e. to go back.

. Search string in the annotate browser: same keys as vim:
     / forward
     n next backward/forward
     ? backward

. Clarify number of events/samples in the report header, from Ashay Rane
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Use cpu-clock-tick sw counter for cpu-cycles only if there is no hw
pmu available. This is the case if the syscall reports ENOENT. In
other cases (e.g. invalid attributes) we don't want the sw counter to
be used.

Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-5-git-send-email-robert.richter@amd.comSigned-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Thread map is actually type pid_t and not int.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-3-git-send-email-robert.richter@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This references are not exported, use static declaration.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1333643188-26895-4-git-send-email-robert.richter@amd.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Move those files to new directory in order to be prepared to
further UI work. Makefile and header file pathes are adjusted
accordingly. Also fix a build breakage if NO_GTK2=1 is given.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523765-12092-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Move those files to new directory in order to be prepared to further UI
work. Makefile and header file pathes are adjusted accordingly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523666-12057-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

    CC util/annotate.o
util/annotate.c: In function symbol__annotate:
util/annotate.c:87:16: error: parsed_line may be used uninitialized in this function [-Werror=maybe-uninitialized]
util/annotate.c:211:22: note: parsed_line was declared here
cc1: all warnings being treated as errors
make: *** [util/annotate.o] Error 1
make: *** Waiting for unfinished jobs....
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ashay Rane <ashay.rane@tacc.utexas.edu>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87ty0tlv4i.fsf@dasan.aot.lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently the parsers objects (bison/flex related) are each time perf
is built. No matter the generated files are already in place, the
parser generation is executed every time.

Changing the rules to have proper flex/bison objects generation
dependencies.

The parsers code is not rebuilt until the flex/bison source files
are touched. Also when flex/bison source is changed, only dependent
objects are rebuilt.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1334140791-3024-1-git-send-email-jolsa@redhat.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now you can do

$ make tools/<toolname>

from the toplevel kernel directory and have the respective tool built.

If you want to build and install it, do

$ make tools/<toolname>_install

$ make tools/<toolname>_clean

should clean the respective tool directories.

If you want to clean all in tools, simply do

$ make tools/clean

Also, if you want to get what the possible targets are, simply calling

$ make tools/

should give you the short help.

$ make tools/install

installs all tools, of course. Doh.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-6-git-send-email-bp@amd64.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

... and make it the default one so that calling 'make' without arguments
in the tools/ directory gives you the possible targets to build along
with a short description of what they are.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-5-git-send-email-bp@amd64.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add a Makefile with all the targets under tools/.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-4-git-send-email-bp@amd64.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use += instead of the bash syntax, as Sam Ravnborg suggests. Also, sort
the -W options alphabetically and (... keep them sorted).
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-3-git-send-email-bp@amd64.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Put generic enough build settings which could be reused by other tools
into a common Makefile.include file.

This commit reintroduces QUIET_SUBDIR{0,1} (see a3d1ee10) which are
going to be used in the following patches.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1334162178-17152-2-git-send-email-bp@amd64.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The commit 65f3e56e ("perf tools: Remove auto-generated bison/flex
files") removed those files from git, so they'll be listed on untracked
files after building perf. Fix it.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333948274-20043-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Using the same keystrokes as vim:

/ = search forward
n = search next forward/backwards
? = search backwards

Still needs to continue from start/end when not found, use HOME + / or
END + ? for now.

At some point we need a keybindings file to support ones favourite mode,
erm, like EMACS, etc.

Also we now need a 'h' window with all these keybindings.
Requested-by: Andi Kleen <andi@firstfloor.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rv30xj2i258n0gwkzlu0c0bc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch prints the number of samples and the count of performance
events separately.

This allows comparing performance of different applications with each
other.

Previously, the sample count was displayed against an 'Events:' heading.
With this patch, the header now reads (for example):

Samples: 5K of event 'instructions'
Event count (approx.): 2993026545

The patch covers both the stdio and the browser interface.
Signed-off-by: Ashay Rane <ashay.rane@tacc.utexas.edu>
[ committer note: Fixed wrt e7f01d1e ]
Link: http://lkml.kernel.org/n/tip-h4nfjm8msedlk8gxkzivfh5y@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now it is possible to press ENTER or -> (right arrow) on jump
instructions to navigate to the offset it points to.

More work needed to support <- to go back, i.e. a jump history.

This is done just like the callq case, i.e. parsing objdump output
lines, but should move to use Masami's disassembler at some point.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-706qqe2xibeiocuabp39mby7@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

From the hit sorted rb_tree, so that we can use it in the upcoming jump
instruction support.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-44a7kl2atf9jxlg9npmotzdg@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we can as well handle jumps. Later we'll move this to a proper
intruction table, etc.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i98elvmix2cw6t8stu1iagfd@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The lines in objdump have this format:

    ffffffff8126543f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
    ffffffff81265494:       mov    %rdi,%rcx

Since we now have objdump_line allowing tools to print the offset
independently from the rest of the line, allow toggling a view where
just offsets from the start of the function are shown:

     2f:       jne    ffffffff81265494 <__list_del_entry+0x84>
<SNIP>
     84:       mov    %rdi,%rcx

The offset view will be the default as soon as operations that deal with
offsets in a function are handled accodringly, i.e. in offset view the
above will become:

     2f:       jne    __list_del_entry+0x84
<SNIP>
     84:       mov    %rdi,%rcx

And then a follow up patch will allow navigating thru jumps, just like
we handle callq instructions.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4zpgimmz8xv7b5c920el7s45@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

And by default use "magenta" for it.

Both the --stdio and --tui routines follow the same semantics.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ede5zkaf7oorwvbqjezb4yg4@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Tools that want to change parts of the line to a different color and
then restore the previous one will use this, starting with the annotate
browser that will change the color of addresses if not on the current
entry, i.e. the selected one.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uiajpevhxo4mzrvna6remb4a@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull two more small regmap fixes from Mark Brown:
 - Now we have users for it that aren't running Android it turns out
   that regcache_sync_region() is much more useful to drivers if it's
   exported for use by modules.  Who knew?
 - Make sure we don't divide by zero when doing debugfs dumps of
   rbtrees, not visible up until now because everything was providing at
   least some cache on startup.

* tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: prevent division by zero in rbtree_show
  regmap: Export regcache_sync_region()

Pull a few KVM fixes from Avi Kivity:
 "A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated),
  and a small build fix."

* 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Resolve RCU vs. async page fault problem
  KVM: VMX: vmx_set_cr0 expects kvm->srcu locked
  KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr()
  KVM: PPC: Book3S: PR: Fix preemption
  KVM: PPC: Save/Restore CR over vcpu_run
  KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry
  KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist
  KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver
  serial: sh-sci: use serial_port_in/out vs sci_in/out.
  sh: vsyscall: Fix up .eh_frame generation.
  sh: dma: Fix up device attribute mismatch from sysdev fallout.
  sh: dwarf unwinder depends on SHcompact.
  sh: fix up fallout from system.h disintegration.

Pull security layer fixlet from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  sysctl: fix write access to dmesg_restrict/kptr_restrict

Pull ACPI & Power Management patches from Len Brown:
 "Two fixes for cpuidle merge-window changes, plus a URL fix in
  MAINTAINERS"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  MAINTAINERS: Update git url for ACPI
  cpuidle: Fix panic in CPU off-lining with no idle driver
  ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead()

Pull target fixes from Nicholas Bellinger:
 "Pull two tcm_fc fabric related fixes for -rc2:

  Note that both have been CC'ed to stable, and patch #1 is the
  important one that addresses a memory corruption bug related to FC
  exchange timeouts + command abort.

  Thanks again to MDR for tracking down this issue!"

* '3.4-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcm_fc: Do not free tpg structure during wq allocation failure
  tcm_fc: Add abort flag for gracefully handling exchange timeout

Avoid freeing a registered tpg structure if an alloc_workqueue call
fails.  This fixes a bug where the failure was leaking memory associated
with se_portal_group setup during the original core_tpg_register() call.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Add abort flag and use it to terminate processing when an exchange
is timed out or is reset. The abort flag is used in place of the
transport_generic_free_cmd function call in the reset and timeout
cases, because calling that function in that context would free
memory that was in use. The aborted flag allows the lifetime to
be managed in a more normal way, while truncating the processing.

This change eliminates a source of memory corruption which
manifested in a variety of ugly ways.

(nab: Drop unused struct fc_exch *ep in ft_recv_seq)
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Acked-by: Kiran Patil <Kiran.patil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: Igor Murzov <e-mail@date.by>
Signed-off-by: Len Brown <len.brown@intel.com>

Pull arch/tile bug fixes from Chris Metcalf:
 "This includes Paul Gortmaker's change to fix the <asm/system.h>
  disintegration issues on tile, a fix to unbreak the tilepro ethernet
  driver, and a backlog of bugfix-only changes from internal Tilera
  development over the last few months.

  They have all been to LKML and on linux-next for the last few days.
  The EDAC change to MAINTAINERS is an oddity but discussion on the
  linux-edac list suggested I ask you to pull that change through my
  tree since they don't have a tree to pull edac changes from at the
  moment."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits)
  drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing
  MAINTAINERS: update EDAC information
  tilepro ethernet driver: fix a few minor issues
  tile-srom.c driver: minor code cleanup
  edac: say "TILEGx" not "TILEPro" for the tilegx edac driver
  arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally
  arch/tile: remove bogus performance optimization
  arch/tile: return SIGBUS for addresses that are unaligned AND invalid
  arch/tile: fix finv_buffer_remote() for tilegx
  arch/tile: use atomic exchange in arch_write_unlock()
  arch/tile: stop mentioning the "kvm" subdirectory
  arch/tile: export the page_home() function.
  arch/tile: fix pointer cast in cacheflush.c
  arch/tile: fix single-stepping over swint1 instructions on tilegx
  arch/tile: implement panic_smp_self_stop()
  arch/tile: add "nop" after "nap" to help GX idle power draw
  arch/tile: use proper memparse() for "maxmem" options
  arch/tile: fix up locking in pgtable.c slightly
  arch/tile: don't leak kernel memory when we unload modules
  arch/tile: fix bug in delay_backoff()
  ...

Merge tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull xen fixes from Konrad Rzeszutek Wilk:
 "Two fixes for regressions:
   * one is a workaround that will be removed in v3.5 with proper fix in
     the tip/x86 tree,
   * the other is to fix drivers to load on PV (a previous patch made
     them only load in PVonHVM mode).

  The rest are just minor fixes in the various drivers and some cleanup
  in the core code."

* tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success
  xen/pciback: fix XEN_PCI_OP_enable_msix result
  xen/smp: Remove unnecessary call to smp_processor_id()
  xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries'
  xen: only check xen_platform_pci_unplug if hvm