Merge remote-tracking branches 'asoc/topic/rt5659', 'asoc/topic/rt5660', 'asoc/topic/rt5677' and 'asoc/topic/samsung' into asoc-next

Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rockchip' and 'asoc/topic/rt5616' into asoc-next

Merge remote-tracking branches 'asoc/topic/nau8810', 'asoc/topic/of-bool', 'asoc/topic/omap' and 'asoc/topic/platform-drvdata' into asoc-next

Merge remote-tracking branches 'asoc/topic/max98371', 'asoc/topic/max9867', 'asoc/topic/max98926' and 'asoc/topic/mtk' into asoc-next

Merge remote-tracking branches 'asoc/topic/dwc', 'asoc/topic/fsl', 'asoc/topic/gpio-chip' and 'asoc/topic/hdmi' into asoc-next

Merge remote-tracking branches 'asoc/topic/da7218', 'asoc/topic/da7219' and 'asoc/topic/dpcm' into asoc-next

Merge remote-tracking branches 'asoc/topic/cs35l30', 'asoc/topic/cs42l73', 'asoc/topic/cs53l30' and 'asoc/topic/da7213' into asoc-next

Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/ak4104', 'asoc/topic/arizona', 'asoc/topic/atmel' and 'asoc/topic/codec-component' into asoc-next

Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/da7219', 'asoc/fix/nau8825', 'asoc/fix/rt5514' and 'asoc/fix/shift' into asoc-linus

The recent series of changes to the caching in the SSI driver have
caused a number of problems to appear in some test systems.  These are
still not fully understood but we're coming up to the merge window so
for now let's revert commit 7de2763d (ASoC: fsl_ssi: Remove
.num_reg_defaults_raw from regmap_config) as backing that out seems to
resolve the problem on affected systems.
Reported-by: Maciej S. Szmigiero" <mail@maciej.szmigiero.name>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>

Currently there is a memory leak of module on a ENOMEM return path.
Fix this by kfree'ing module before returning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds SNDRV_PCM_TRIGGER_SUSPEND/RESUME.
Otherwise, it breaks rsnd driver internal start/stop counter
when suspend/resume. This issue was reported/tested by Hiep
Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b ("ALSA: tlv:
add DECLARE_TLV_DB_RANGE()").

This commit removes usage of the macro, with the obsoleting macro renamed
to SNDRV_CTL_TLVD_DECLARE_DB_RANGE().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

TLV_DB_RANGE_HEAD macro was obsoleted by commit bf1d1c9b ("ALSA: tlv:
add DECLARE_TLV_DB_RANGE()").

This commit removes usage of the macro, with the obsoleting macro renamed
to SNDRV_CTL_TLVD_DECLARE_DB_RANGE().
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

Do s/ststem/system/ .
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports a below warning.

sound/soc/codecs/da7219.c:804:57: warning: dubious: x & !y

The line includes a condition statement; '(a < b) & !c'. Practically, the
evaluated value of this statement equals to the value of '(a < b) && !c'.
Although, it's not an usual way to use bitwise operations as logical
operations to several conditions.

This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports below warnings.

bxt_rt298.c:275:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:290:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:304:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:317:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:331:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:344:9: warning: obsolete array initializer, use C99 syntax
bxt_rt298.c:357:9: warning: obsolete array initializer, use C99 syntax

There's no need to use obsoleted way. This commit fixes it.

Fixes: 76016322 (ASoC: Intel: Add Broxton-P machine driver)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports below warnings.

bxt_da7219_max98357a.c:250:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:275:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:290:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:304:9: warning: obsolete array initializer, use C99 syntax
bxt_da7219_max98357a.c:317:9: warning: obsolete array initializer, use C99 syntax

There's no need to use obsoleted way. This commit fixes it.

Fixes: 723bad3f (ASoC: Intel: Add Broxton-P Dialog Maxim machine driver)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Sparse reports below warnings.

rt5616.c:1270:24: warning: symbol 'rt5616_aif_dai_ops' was not declared. Should it be static?
rt5616.c:1277:27: warning: symbol 'rt5616_dai' was not declared. Should it be static?

These two symbols are just used inner the file, thus it's better to add
static qualifier.

This commit adds it.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>

The later Arizona parts do run write sequences to power up and down the
speaker path as such a delay needs to be inserted into the DAPM sequence
to allow this to run. This patch adds appropriate delays into the
existing coalesced delay scheme.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When debugging it is useful to check the total power up/down delay that
is executed as part of the coalesced output delay. This patch adds some
debug prints for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add channel and rate constraints for Refcap and dmiccap devices
respectively.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When operating the BE, we should print out the dai_link name of BE other
than FE. This is useful when analyzing the kernel log.
Signed-off-by: Donglin Peng <pengdonglin@smartisan.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently if AAD is enabled in the device, during system suspend
the feature remains, regardless of whether the codec is a wake-up
source or not. This means some additional power is being used
which is unnecessary, and can causes issues with some platforms'
IRQ handlers where state changes during system suspend aren't
captured.

This patch updates the driver to disable AAD during suspend, if
we're not a wake-up source, and then re-enables this on resume.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently the reset code in i2c_probe only resets the AAD part of
the device and not the entire codec. This patch updates the driver
to resolve this and ensures that if the codec is still active from
a previous boot then the audio paths are powered down prior to
reset.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'fix/da7219' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-da7219

Currently the driver exposes range of sample rates between 8KHz to
192KHz as a part of dai_driver. This does not hold true as the limited
number sample rates are allowed in hw_params DAI callback. This patch
limits the sample rates exposed via dai_driver.
Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The booting process for the DSP is clearly separated into two parts, the
preloader brings up the core and downloads code, then the main widget
starts the code actually executing. However the shutdown sequence is all
handled with the main widget.

To allow the preloading to be run independently of the main audio bring
up it makes sense, and is generally just cleaner, for the preloader
widget to shutdown those things it initialised. This patch moves the
appropriate parts of the shutdown process into the preloader widget.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Between when we load the DSP and when it actually starts running put the
core into a lower power state where the memory is retained but nothing
is clocked.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Replace the 1ms msleep in wm_adsp2_ena with a usleep_range, as per
normal guidance on delay functions. Also tighten up the delay a little
as 1ms was quite generous.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The audio component framework code has not yet landed in the i915 driver
so drop the use of the API for the time being.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Jeeja KP <jeeja.kp@intel.com>

Pull tracefs fixes from Steven Rostedt:
 "Al Viro has been looking at the tracefs code, and has pointed out some
  issues.  This contains one fix by me and one by Al.  I'm sure that
  he'll come up with more but for now I tested these patches and they
  don't appear to have any negative impact on tracing"

* tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  fix memory leaks in tracing_buffers_splice_read()
  tracing: Move mutex to protect against resetting of seq data