Pull more documentation updates from Jonathan Corbet:
 "Connect the newly RST-formatted documentation to the rest; this had to
  wait until the input pull was done. There's also a few small fixes
  that wandered in"

* tag 'docs-4.12-2' of git://git.lwn.net/linux:
  doc: replace FTP URL to kernel.org with HTTPS one
  docs: update references to the device io book
  Documentation: earlycon: fix Marvell Armada 3700 UART name
  docs-rst: add input docs at main index and use kernel-figure

Pull more arm64 updates from Catalin Marinas:

 - Silence module allocation failures when CONFIG_ARM*_MODULE_PLTS is
   enabled. This requires a check for __GFP_NOWARN in alloc_vmap_area()

 - Improve/sanitise user tagged pointers handling in the kernel

 - Inline asm fixes/cleanups

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=y
  ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=y
  mm: Silence vmap() allocation failures based on caller gfp_flags
  arm64: uaccess: suppress spurious clang warning
  arm64: atomic_lse: match asm register sizes
  arm64: armv8_deprecated: ensure extension of addr
  arm64: uaccess: ensure extension of access_ok() addr
  arm64: ensure extension of smp_store_release value
  arm64: xchg: hazard against entire exchange variable
  arm64: documentation: document tagged pointer stack constraints
  arm64: entry: improve data abort handling of tagged pointers
  arm64: hw_breakpoint: fix watchpoint matching for tagged pointers
  arm64: traps: fix userspace cache maintenance emulation on a tagged pointer

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, just a couple of small bugfixes,
  improvements and cleanups.

   - fix handling of probing errors in omapfb (Arvind Yadav)

   - remove incorrect __exit markups in few drivers (Dmitry Torokhov)

   - fix boot time logo support for drivers using deferred probe
     (Takeshi Kihara)

   - fix DMA allocation size for ARM CLCD driver (Liam Beguin)

   - add support for specifying size via xenstore in xen-frontfb
     (Juergen Gross)

   - support for AUS mode in imxfb driver (Martin Kaiser)

   - fix buffer on stack usage in udlfb driver (Maksim Salau)

   - probe failure path fixup in sm501fb driver (Alexey Khoroshilov)

   - fix config dependency loop for stifb driver (Arnd Bergmann)

   - misc cleanups (Joe Perches, Christophe Leroy, Karim Eshapa, Pushkar
     Jambhlekar)"

* tag 'fbdev-v4.12' of git://github.com/bzolnier/linux:
  fbdev: sti: don't select CONFIG_VT
  drivers/video/fbdev/omap/lcd_mipid.c: Use time comparison kernel macros
  sm501fb: don't return zero on failure path in sm501fb_start()
  video: fbdev: udlfb: Fix buffer on stack
  video: console: Remove reference to CONFIG_8xx
  dt-bindings: display: imx: entry for AUS mode
  video: fbdev: imxfb: support AUS mode
  drivers/video/fbdev: Fixing coding guidelines in acornfb.c
  xen, fbfront: add support for specifying size via xenstore
  video: ARM CLCD: fix dma allocation size
  drivers/video: Convert remaining uses of pr_warning to pr_warn
  video/logo: tidyup fb_logo_late_init initcall timing
  video: fbdev: i810: remove incorrect __exit markups
  video: fbdev: pmag-aa-fb: remove incorrect __exit markups
  video: fbdev: pmagb-b-fb: remove incorrect __exit markups
  video: fbdev: pmag-ba-fb: remove incorrect __exit markups
  omapfb: dss: Handle return errors in dss_init_ports()

Pull block fixes from Jens Axboe:
 "A smaller collection of fixes that should go into -rc1. This contains:

   - A fix from Christoph, fixing a regression with the WRITE_SAME and
     partial completions. Caused a BUG() on ppc.

   - Fixup for __blk_mq_stop_hw_queues(), it should be static. From
     Colin.

   - Removal of dmesg error messages on elevator switching, when invoked
     from sysfs. From me.

   - Fix for blk-stat, using this_cpu_ptr() in a section only protected
     by rcu_read_lock(). This breaks when PREEMPT_RCU is enabled. From
     me.

   - Two fixes for BFQ from Paolo, one fixing a crash and one updating
     the documentation.

   - An error handling lightnvm memory leak, from Rakesh.

   - The previous blk-mq hot unplug lock reversal depends on the CPU
     hotplug rework that isn't in mainline yet. This caused a lockdep
     splat when people unplugged CPUs with blk-mq devices. From Wanpeng.

   - A regression fix for DIF/DIX on blk-mq. From Wen"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: handle partial completions for special payload requests
  blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op
  blk-stat: don't use this_cpu_ptr() in a preemptable section
  elevator: remove redundant warnings on IO scheduler switch
  block, bfq: stress that low_latency must be off to get max throughput
  block, bfq: use pointer entity->sched_data only if set
  nvme: lightnvm: fix memory leak
  blk-mq: make __blk_mq_stop_hw_queues static
  lightnvm: remove unused rq parameter of nvme_nvm_rqtocmd() to kill warning
  block/mq: fix potential deadlock during cpu hotplug

FTP services were shutdown some weeks ago, so the FTP URL
does not work anymore. Fix this by replacing it with
corresponding HTTPS URL.
Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Pull MTD updates from Brian Norris:
 "NAND, from Boris:
   - some minor fixes/improvements on existing drivers (fsmc, gpio, ifc,
     davinci, brcmnand, omap)
   - a huge cleanup/rework of the denali driver accompanied with core
     fixes/improvements to simplify the driver code
   - a complete rewrite of the atmel driver to support new DT bindings
     make future evolution easier
   - the addition of per-vendor detection/initialization steps to avoid
     extending the nand_ids table with more extended-id entries

  SPI NOR, from Cyrille:
   - fixes in the hisi, intel and Mediatek SPI controller drivers
   - fixes to some SPI flash memories not supporting the Chip Erase
     command.
   - add support to some new memory parts (Winbond, Macronix, Micron,
     ESMT).
   - add new driver for the STM32 QSPI controller

  And a few fixes for Gemini and Versatile platforms on physmap-of"

* tag 'for-linus-20170510' of git://git.infradead.org/linux-mtd: (100 commits)
  MAINTAINERS: Update NAND subsystem git repositories
  mtd: nand: gpio: update binding
  mtd: nand: add ooblayout for old hamming layout
  mtd: oxnas_nand: Allocating more than necessary in probe()
  dt-bindings: mtd: Document the STM32 QSPI bindings
  mtd: mtk-nor: set controller's address width according to nor flash
  mtd: spi-nor: add driver for STM32 quad spi flash controller
  mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program
  mtd: nand: davinci: add comment on NAND subpage write status on keystone
  mtd: nand: omap2: Fix partition creation via cmdline mtdparts
  mtd: nand: NULL terminate a of_device_id table
  mtd: nand: Fix a couple error codes
  mtd: nand: allow drivers to request minimum alignment for passed buffer
  mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset
  mtd: nand: denali: allow to override revision number
  mtd: nand: denali_dt: use pdev instead of ofdev for platform_device
  mtd: nand: denali_dt: remove dma-mask DT property
  mtd: nand: denali: support 64bit capable DMA engine
  mtd: nand: denali_dt: enable HW_ECC_FIXUP for Altera SOCFPGA variant
  mtd: nand: denali: support HW_ECC_FIXUP capability
  ...

SCSI devices can return short writes on Write Same just like for normal
writes, so we need to handle this case for our special payload requests
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

When CONFIG_ARM64_MODULE_PLTS is enabled, the first allocation using the
module space fails, because the module is too big, and then the module
allocation is attempted from vmalloc space. Silence the first allocation
failure in that case by setting __GFP_NOWARN.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

When CONFIG_ARM_MODULE_PLTS is enabled, the first allocation using the
module space fails, because the module is too big, and then the module
allocation is attempted from vmalloc space. Silence the first allocation
failure in that case by setting __GFP_NOWARN.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

If the caller has set __GFP_NOWARN don't print the following message:
vmap allocation for size 15736832 failed: use vmalloc=<size> to increase
size.

This can happen with the ARM/Linux or ARM64/Linux module loader built
with CONFIG_ARM{,64}_MODULE_PLTS=y which does a first attempt at loading
a large module from module space, then falls back to vmalloc space.
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild UAPI updates from Masahiro Yamada:
 "Improvement of headers_install by Nicolas Dichtel.

  It has been long since the introduction of uapi directories, but the
  de-coupling of exported headers has not been completed. Headers listed
  in header-y are exported whether they exist in uapi directories or
  not. His work fixes this inconsistency.

  All (and only) headers under uapi directories are now exported. The
  asm-generic wrappers are still exceptions, but this is a big step
  forward"

* tag 'kbuild-uapi-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  arch/include: remove empty Kbuild files
  uapi: export all arch specifics directories
  uapi: export all headers under uapi directories
  smc_diag.h: fix include from userland
  btrfs_tree.h: fix include from userland
  uapi: includes linux/types.h before exporting files
  Makefile.headersinst: remove destination-y option
  Makefile.headersinst: cleanup input files
  x86: stop exporting msr-index.h to userland
  nios2: put setup.h in uapi
  h8300: put bitsperlong.h in uapi

Merge tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull misc Kbuild updates from Masahiro Yamada:

 - clean up builddeb script

 - use full path for KBUILD_IMAGE to fix rpm-pkg build

 - fix objdiff tool to ignore debug info

* tag 'kbuild-misc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  builddeb: fix typo
  builddeb: Update a few outdated and hardcoded strings
  deb-pkg: Remove the KBUILD_IMAGE workaround
  unicore32: Use full path in KBUILD_IMAGE definition
  sh: Use full path in KBUILD_IMAGE definition
  arc: Use full path in KBUILD_IMAGE definition
  arm: Use full path in KBUILD_IMAGE definition
  arm64: Use full path in KBUILD_IMAGE definition
  scripts: objdiff: Ignore debug info when comparing

Pull Kbuild updates from Masahiro Yamada:

 - improve Clang support

 - clean up various Makefiles

 - improve build log visibility (objtool, alpha, ia64)

 - improve compiler flag evaluation for better build performance

 - fix GCC version-dependent warning

 - fix genksyms

* tag 'kbuild-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (23 commits)
  kbuild: dtbinst: remove unnecessary __dtbs_install_prep target
  ia64: beatify build log for gate.so and gate-syms.o
  alpha: make short build log available for division routines
  alpha: merge build rules of division routines
  alpha: add $(src)/ rather than $(obj)/ to make source file path
  Makefile: evaluate LDFLAGS_BUILD_ID only once
  objtool: make it visible in make V=1 output
  kbuild: clang: add -no-integrated-as to KBUILD_[AC]FLAGS
  kbuild: Add support to generate LLVM assembly files
  kbuild: Add better clang cross build support
  kbuild: drop -Wno-unknown-warning-option from clang options
  kbuild: fix asm-offset generation to work with clang
  kbuild: consolidate redundant sed script ASM offset generation
  frv: Use OFFSET macro in DEF_*REG()
  kbuild: avoid conflict between -ffunction-sections and -pg on gcc-4.7
  kbuild: Consolidate header generation from ASM offset information
  kbuild: use -Oz instead of -Os when using clang
  kbuild, LLVMLinux: Add -Werror to cc-option to support clang
  Kbuild: make designated_init attribute fatal
  kbuild: drop unneeded patterns '.*.orig' and '.*.rej' from distclean
  ...

Pull RTC updates from Alexandre Belloni:
 "RTC subsystem update:
   - Add OF device ID table for i2c drivers

  New RTC driver:
   - Motorola CPCAP PMIC RTC

  RTC driver updates:
   - cmos: fix IRQ selection
   - ds1307: Add ST m41t0 support
   - ds1374: fix watchdog configuration
   - sh: Add rza series support"

* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: gemini: add return value validation
  rtc: snvs: fix an incorrect check of return value
  rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
  rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
  rtc: sh: mark PM functions as unused
  rtc: hid-sensor-time: remove some dead code
  rtc: m41t80: Add proper compatible for rv4162
  rtc: ds1307: Add m41t0 to OF device ID table
  rtc: ds1307: support m41t0 variant
  rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
  rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
  x86: i8259: export legacy_pic symbol
  dt-bindings: rtc: document the rtc-sh bindings
  rtc: sh: add support for rza series
  rtc: cpcap: kfreeing devm allocated memory
  rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
  rtc: cpcap: new rtc driver
  dt-bindings: Add vendor prefix for Motorola
  rtc: omap: mark PM methods as __maybe_unused
  rtc: omap: remove incorrect __exit markups
  ...

Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...

NAND branches are now hosted on MTD repos, nand/next is on l2-mtd and
nand/fixes will be on linux-mtd.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Brian: added branch names]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

This patch updates the binding documentation in accordance with
commit 44dd1828 ("mtd: nand: gpio: make nCE GPIO optional")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reported-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

Pull clk updates from Stephen Boyd:
 "Sort of on the quieter side this time, which is probably due more to
  me not catching up as quickly on patch review than anything else.
  Overall it seems normal though, a few small changes to the core,
  mostly small non-critical fixes here and there as well as driver
  updates for new and existing hardware support.

  The biggest things are the TI clk driver rework to lay the groundwork
  for clkctrl support in the next merge window and the AmLogic
  audio/graphics clk support.

  Core:
   - clk_possible_parents debugfs file so we know which parents a clk
     could possibly have
   - Fix to make clk rate change notifiers stop on the first failure
     instead of continuing

  New Drivers:
   - Mediatek MT6797 SoCs
   - hi655x PMIC clks
   - AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
   - Allwinner H5 SoCs and PRCM hardware

  Updates:
   - Nvidia Tegra T210 cleanups and non-critical fixes
   - TI OMAP cleanups in preparation for clkctrl support
   - trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
   - ZTE zx296718 SoC VGA clks
   - Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
   - IDT VersaClock 5P49V5935 support
   - Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
     support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
  clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
  clk: ti: divider: try to fix ti_clk_register_divider
  clk: mvebu: Use kcalloc() in two functions
  clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
  clk: nomadik: Delete error messages for a failed memory allocation in two functions
  clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
  clk: Improve a size determination in two functions
  clk: Replace four seq_printf() calls by seq_putc()
  clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
  clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
  clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
  reset: mediatek: Add MT2701 ethsys reset controller include file
  clk: mediatek: add mt2701 ethernet reset
  clk: hi6220: Add the hi655x's pmic clock
  clk: ti: fix building without legacy omap3
  clk: ti: fix linker error with !SOC_OMAP4
  clk: hi3620: Fix a typo in one variable name
  clk: hi3620: Delete error messages for a failed memory allocation in two functions
  clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
  clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
  ...

Pull nfsd updates from Bruce Fields:
 "Another RDMA update from Chuck Lever, and a bunch of miscellaneous
  bugfixes"

* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
  nfsd: Fix up the "supattr_exclcreat" attributes
  nfsd: encoders mustn't use unitialized values in error cases
  nfsd: fix undefined behavior in nfsd4_layout_verify
  lockd: fix lockd shutdown race
  NFSv4: Fix callback server shutdown
  SUNRPC: Refactor svc_set_num_threads()
  NFSv4.x/callback: Create the callback service through svc_create_pooled
  lockd: remove redundant check on block
  svcrdma: Clean out old XDR encoders
  svcrdma: Remove the req_map cache
  svcrdma: Remove unused RDMA Write completion handler
  svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
  svcrdma: Clean up RPC-over-RDMA backchannel reply processing
  svcrdma: Report Write/Reply chunk overruns
  svcrdma: Clean up RDMA_ERROR path
  svcrdma: Use rdma_rw API in RPC reply path
  svcrdma: Introduce local rdma_rw API helpers
  svcrdma: Clean up svc_rdma_get_inv_rkey()
  svcrdma: Add helper to save pages under I/O
  svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable bugfixes:
   - Fix use after free in write error path
   - Use GFP_NOIO for two allocations in writeback
   - Fix a hang in OPEN related to server reboot
   - Check the result of nfs4_pnfs_ds_connect
   - Fix an rcu lock leak

  Features:
   - Removal of the unmaintained and unused OSD pNFS layout
   - Cleanup and removal of lots of unnecessary dprintk()s
   - Cleanup and removal of some memory failure paths now that GFP_NOFS
     is guaranteed to never fail.
   - Remove the v3-only data server limitation on pNFS/flexfiles

  Bugfixes:
   - RPC/RDMA connection handling bugfixes
   - Copy offload: fixes to ensure the copied data is COMMITed to disk.
   - Readdir: switch back to using the ->iterate VFS interface
   - File locking fixes from Ben Coddington
   - Various use-after-free and deadlock issues in pNFS
   - Write path bugfixes"

* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
  pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
  NFSv4.1: Work around a Linux server bug...
  NFS append COMMIT after synchronous COPY
  NFSv4: Fix exclusive create attributes encoding
  NFSv4: Fix an rcu lock leak
  nfs: use kmap/kunmap directly
  NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
  Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
  NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
  pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
  pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
  pNFS: Fix a deadlock when coalescing writes and returning the layout
  pNFS: Don't clear the layout return info if there are segments to return
  pNFS: Ensure we commit the layout if it has been invalidated
  pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
  pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
  pNFS: Ensure we check layout validity before marking it for return
  NFS4.1 handle interrupted slot reuse from ERR_DELAY
  NFSv4: check return value of xdr_inline_decode
  nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
  ...

Pull metag updates from James Hogan:
 "These patches primarily make some usercopy improvements (following on
  from the recent usercopy fixes):

   - reformat and simplify rapf copy loops

   - add 64-bit get_user support

  And fix a couple more uaccess issues, partily pointed out by Al:

   - fix access_ok() serious shortcomings

   - fix strncpy_from_user() address validation

  Also included is a trivial removal of a redundant increment"

* tag 'metag-for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag/mm: Drop pointless increment
  metag/uaccess: Check access_ok in strncpy_from_user
  metag/uaccess: Fix access_ok()
  metag/usercopy: Add 64-bit get_user support
  metag/usercopy: Simplify rapf loop fixup corner case
  metag/usercopy: Reformat rapf loop inline asm

Pull virtio updates from Michael Tsirkin:
 "Fixes, cleanups, performance

  A bunch of changes to virtio, most affecting virtio net. Also ptr_ring
  batched zeroing - first of batching enhancements that seems ready."

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  s390/virtio: change maintainership
  tools/virtio: fix spelling mistake: "wakeus" -> "wakeups"
  virtio_net: tidy a couple debug statements
  ptr_ring: support testing different batching sizes
  ringtest: support test specific parameters
  ptr_ring: batch ring zeroing
  virtio: virtio_driver doc
  virtio_net: don't reset twice on XDP on/off
  virtio_net: fix support for small rings
  virtio_net: reduce alignment for buffers
  virtio_net: rework mergeable buffer handling
  virtio_net: allow specifying context for rx
  virtio: allow extra context per descriptor
  tools/virtio: fix build breakage
  virtio: add context flag to find vqs
  virtio: wrap find_vqs
  ringtest: fix an assert statement

If an NFSv4 client asks us for the supattr_exclcreat, then we must
not return attributes that are unsupported by this minor version.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: 75976de6 ("NFSD: Return word2 bitmask if setting security..,")
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull more KVM updates from Paolo Bonzini:
 "ARM:
   - bugfixes
   - moved shared 32-bit/64-bit files to virt/kvm/arm
   - support for saving/restoring virtual ITS state to userspace

  PPC:
   - XIVE (eXternal Interrupt Virtualization Engine) support

  x86:
   - nVMX improvements, including emulated page modification logging
     (PML) which brings nice performance improvements on some workloads"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (45 commits)
  KVM: arm/arm64: vgic-its: Cleanup after failed ITT restore
  KVM: arm/arm64: Don't call map_resources when restoring ITS tables
  KVM: arm/arm64: Register ITS iodev when setting base address
  KVM: arm/arm64: Get rid of its->initialized field
  KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs
  KVM: arm/arm64: Slightly rework kvm_vgic_addr
  KVM: arm/arm64: Make vgic_v3_check_base more broadly usable
  KVM: arm/arm64: Refactor vgic_register_redist_iodevs
  KVM: Add kvm_vcpu_get_idx to get vcpu index in kvm->vcpus
  nVMX: Advertise PML to L1 hypervisor
  nVMX: Implement emulated Page Modification Logging
  kvm: x86: Add a hook for arch specific dirty logging emulation
  kvm: nVMX: Validate CR3 target count on nested VM-entry
  KVM: set no_llseek in stat_fops_per_vm
  KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enable
  KVM: arm/arm64: Clarification and relaxation to ITS save/restore ABI
  KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES
  KVM: arm64: vgic-its: Fix pending table sync
  KVM: arm64: vgic-its: ITT save and restore
  KVM: arm64: vgic-its: Device table save/restore
  ...

Pull tracing fix from Steven Rostedt:
 "This is a trivial patch that changes a check for a cpumask from a NULL
  pointer to using cpumask_available(), which will do the check. This is
  because cpumasks when not allocated are always set, and clang
  complains about it"

* tag 'trace-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Use cpumask_available() to check if cpumask variable may be used

In error cases, lgp->lg_layout_type may be out of bounds; so we
shouldn't be using it until after the check of nfserr.

This was seen to crash nfsd threads when the server receives a LAYOUTGET
request with a large layout type.

GETDEVICEINFO has the same problem.
Reported-by: Ari Kauppi <Ari.Kauppi@synopsys.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann:
 "This introduces a generic TEE framework in the kernel, to handle
  trusted environemtns (security coprocessor or software implementations
  such as OP-TEE/TrustZone). I'm sending it separately from the other
  arm-soc driver changes to give it a little more visibility, once the
  subsystem is merged, we will likely keep this in the arm₋soc drivers
  branch or have the maintainers submit pull requests directly,
  depending on the patch volume.

  I have reviewed earlier versions in the past, and have reviewed the
  latest version in person during Linaro Connect BUD17.

  Here is my overall assessment of the subsystem:

   - There is clearly demand for this, both for the generic
     infrastructure and the specific OP-TEE implementation.

   - The code has gone through a large number of reviews, and the review
     comments have all been addressed, but the reviews were not coming
     up with serious issues any more and nobody volunteered to vouch for
     the quality.

   - The user space ioctl interface is sufficient to work with the
     OP-TEE driver, and it should in principle work with other TEE
     implementations that follow the GlobalPlatform[1] standards, but it
     might need to be extended in minor ways depending on specific
     requirements of future TEE implementations

   - The main downside of the API to me is how the user space is tied to
     the TEE implementation in hardware or firmware, but uses a generic
     way to communicate with it. This seems to be an inherent problem
     with what it is trying to do, and I could not come up with any
     better solution than what is implemented here.

  For a detailed history of the patch series, see

    https://lkml.org/lkml/2017/3/10/1277"

* tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dt: hikey: Add optee node
  Documentation: tee subsystem and op-tee driver
  tee: add OP-TEE driver
  tee: generic TEE subsystem
  dt/bindings: add bindings for optee

Pull RCU updates from Ingo Molnar:
 "The main changes are:

   - Debloat RCU headers

   - Parallelize SRCU callback handling (plus overlapping patches)

   - Improve the performance of Tree SRCU on a CPU-hotplug stress test

   - Documentation updates

   - Miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits)
  rcu: Open-code the rcu_cblist_n_lazy_cbs() function
  rcu: Open-code the rcu_cblist_n_cbs() function
  rcu: Open-code the rcu_cblist_empty() function
  rcu: Separately compile large rcu_segcblist functions
  srcu: Debloat the <linux/rcu_segcblist.h> header
  srcu: Adjust default auto-expediting holdoff
  srcu: Specify auto-expedite holdoff time
  srcu: Expedite first synchronize_srcu() when idle
  srcu: Expedited grace periods with reduced memory contention
  srcu: Make rcutorture writer stalls print SRCU GP state
  srcu: Exact tracking of srcu_data structures containing callbacks
  srcu: Make SRCU be built by default
  srcu: Fix Kconfig botch when SRCU not selected
  rcu: Make non-preemptive schedule be Tasks RCU quiescent state
  srcu: Expedite srcu_schedule_cbs_snp() callback invocation
  srcu: Parallelize callback handling
  kvm: Move srcu_struct fields to end of struct kvm
  rcu: Fix typo in PER_RCU_NODE_PERIOD header comment
  rcu: Use true/false in assignment to bool
  rcu: Use bool value directly
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20170303 which adds a few minor fixes and improvements, update ACPI
  SoC drivers with new device IDs, platform-related information and
  similar, fix the register information in the xpower PMIC driver,
  introduce a concept of "always present" devices to the ACPI device
  enumeration code and use it to fix a problem with one platform, and
  fix a system resume issue related to power resources.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20170303
     which includes:
      * Minor fixes and improvements in the core code (Bob Moore,
        Seunghun Han).
      * Debugger fixes (Colin Ian King, Lv Zheng).
      * Compiler/disassembler improvements (Bob Moore, David Box, Lv
        Zheng).
      * Build-related update (Lv Zheng).

   - Add new device IDs and platform-related information to the ACPI
     drivers for Intel (LPSS) and AMD (APD) SoCs (Hanjun Guo, Hans de
     Goede).

   - Make it possible to quirk ACPI-enumerated devices as "always
     present" on platforms where they are incorrectly reported as not
     present by the AML and add the INT0002 device ID to the list of
     "always present" devices (Hans de Goede).

   - Fix the register information in the xpower PMIC driver and add
     comments to map the registers to symbols used by AML to it (Hans de
     Goede).

   - Move the code turning off unused ACPI power resources during system
     resume to a point after all devices have been resumed to avoid
     issues with power resources that do not behave as expected (Hans de
     Goede)"

* tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
  ACPI / power: Delay turning off unused power resources after suspend
  ACPI / PMIC: xpower: Fix power_table addresses
  ACPI / LPSS: Call pwm_add_table() for Bay Trail PWM device
  ACPICA: Update version to 20170303
  ACPICA: iasl: add ASL conversion tool
  ACPICA: Local cache support: Allow small cache objects
  ACPICA: Disassembler: Do not unconditionally remove temporary names
  ACPICA: iasl: Fix IORT SMMU GSI disassembling
  ACPICA: Cleanup AML opcode definitions, no functional change
  ACPICA: Debugger: Add interpreter blocking mark for single-step mode
  ACPICA: debugger: fix memory leak on Pathname
  ACPICA: Update for automatic repair code for objects returned by evaluate_object
  ACPICA: Namespace: fix operand cache leak
  ACPICA: Fix several incorrect invocations of ACPICA return macro
  ACPICA: Fix a module for excessive debug output
  ACPICA: Update some function headers, no funtional change
  ACPICA: Disassembler: Enhance resource descriptor detection
  i2c: designware: Add ACPI HID for Hisilicon Hip07/08 I2C controller
  ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller
  ACPI / bus: Add INT0002 to list of always-present devices
  ...

Pull more power management updates from Rafael Wysocki:
 "These add new CPU IDs to a couple of drivers, fix a possible NULL
  pointer dereference in the cpuidle core, update DT-related things in
  the generic power domains framework and finally update the
  suspend/resume infrastructure to improve the handling of wakeups from
  suspend-to-idle.

  Specifics:

   - Add Intel Gemini Lake CPU IDs to the intel_idle and intel_rapl
     drivers (David Box).

   - Add a NULL pointer check to the cpuidle core to prevent it from
     crashing on platforms with incomplete cpuidle configuration (Fei
     Li).

   - Fix DT-related documentation in the generic power domains (genpd)
     framework and add a MAINTAINERS entry for DT-related material in
     genpd (Viresh Kumar).

   - Update the system suspend/resume infrastructure to improve the
     handling of aborts of suspend transitions in progress in the wakeup
     framework and rework the suspend-to-idle core loop to make it
     possible to filter out spurious wakeup events (specifically the
     ones coming from ACPI) without resuming all the way up to user
     space every time (Rafael Wysocki)"

* tag 'pm-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle
  PM / wakeup: Integrate mechanism to abort transitions in progress
  x86/intel_idle: add Gemini Lake support
  cpuidle: check dev before usage in cpuidle_use_deepest_state()
  powercap: intel_rapl: Add support for Gemini Lake
  PM / Domains: Add DT file to MAINTAINERS
  PM / Domains: Fix DT example

Pull overlayfs update from Miklos Szeredi:
 "The biggest part of this is making st_dev/st_ino on the overlay behave
  like a normal filesystem (i.e. st_ino doesn't change on copy up,
  st_dev is the same for all files and directories). Currently this only
  works if all layers are on the same filesystem, but future work will
  move the general case towards more sane behavior.

  There are also miscellaneous fixes, including fixes to handling
  append-only files. There's a small change in the VFS, but that only
  has an effect on overlayfs, since otherwise file->f_path.dentry->inode
  and file_inode(file) are always the same"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: update documentation w.r.t. constant inode numbers
  ovl: persistent inode numbers for upper hardlinks
  ovl: merge getattr for dir and nondir
  ovl: constant st_ino/st_dev across copy up
  ovl: persistent inode number for directories
  ovl: set the ORIGIN type flag
  ovl: lookup non-dir copy-up-origin by file handle
  ovl: use an auxiliary var for overlay root entry
  ovl: store file handle of lower inode on copy up
  ovl: check if all layers are on the same fs
  ovl: do not set overlay.opaque on non-dir create
  ovl: check IS_APPEND() on real upper inode
  vfs: ftruncate check IS_APPEND() on real upper inode
  ovl: Use designated initializers
  ovl: lockdep annotate of nested stacked overlayfs inode lock

Pull fuse updates from Miklos Szeredi:
 "Support for pid namespaces from Seth and refcount_t work from Elena"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: Add support for pid namespaces
  fuse: convert fuse_conn.count from atomic_t to refcount_t
  fuse: convert fuse_req.count from atomic_t to refcount_t
  fuse: convert fuse_file.count from atomic_t to refcount_t

Pull ceph updates from Ilya Dryomov:
 "The two main items are support for disabling automatic rbd exclusive
  lock transfers from myself and the long awaited -ENOSPC handling
  series from Jeff.

  The former will allow rbd users to take advantage of exclusive lock's
  built-in blacklist/break-lock functionality while staying in control
  of who owns the lock. With the latter in place, we will abort
  filesystem writes on -ENOSPC instead of having them block
  indefinitely.

  Beyond that we've got the usual pile of filesystem fixes from Zheng,
  some refcount_t conversion patches from Elena and a patch for an
  ancient open() flags handling bug from Alexander"

* tag 'ceph-for-4.12-rc1' of git://github.com/ceph/ceph-client: (31 commits)
  ceph: fix memory leak in __ceph_setxattr()
  ceph: fix file open flags on ppc64
  ceph: choose readdir frag based on previous readdir reply
  rbd: exclusive map option
  rbd: return ResponseMessage result from rbd_handle_request_lock()
  rbd: kill rbd_is_lock_supported()
  rbd: support updating the lock cookie without releasing the lock
  rbd: store lock cookie
  rbd: ignore unlock errors
  rbd: fix error handling around rbd_init_disk()
  rbd: move rbd_unregister_watch() call into rbd_dev_image_release()
  rbd: move rbd_dev_destroy() call out of rbd_dev_image_release()
  ceph: when seeing write errors on an inode, switch to sync writes
  Revert "ceph: SetPageError() for writeback pages if writepages fails"
  ceph: handle epoch barriers in cap messages
  libceph: add an epoch_barrier field to struct ceph_osd_client
  libceph: abort already submitted but abortable requests when map or pool goes full
  libceph: allow requests to return immediately on full conditions if caller wishes
  libceph: remove req->r_replay_version
  ceph: make seeky readdir more efficient
  ...

Pull btrfs updates from Chris Mason:
 "This has fixes and cleanups Dave Sterba collected for the merge
  window.

  The biggest functional fixes are between btrfs raid5/6 and scrub, and
  raid5/6 and device replacement. Some of our pending qgroup fixes are
  included as well while I bash on the rest in testing.

  We also have the usual set of cleanups, including one that makes
  __btrfs_map_block() much more maintainable, and conversions from
  atomic_t to refcount_t"

* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
  btrfs: fix the gfp_mask for the reada_zones radix tree
  Btrfs: fix reported number of inode blocks
  Btrfs: send, fix file hole not being preserved due to inline extent
  Btrfs: fix extent map leak during fallocate error path
  Btrfs: fix incorrect space accounting after failure to insert inline extent
  Btrfs: fix invalid attempt to free reserved space on failure to cow range
  btrfs: Handle delalloc error correctly to avoid ordered extent hang
  btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
  btrfs: check if the device is flush capable
  btrfs: delete unused member nobarriers
  btrfs: scrub: Fix RAID56 recovery race condition
  btrfs: scrub: Introduce full stripe lock for RAID56
  btrfs: Use ktime_get_real_ts for root ctime
  Btrfs: handle only applicable errors returned by btrfs_get_extent
  btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
  btrfs: use q which is already obtained from bdev_get_queue
  Btrfs: switch to div64_u64 if with a u64 divisor
  Btrfs: update scrub_parity to use u64 stripe_len
  Btrfs: enable repair during read for raid56 profile
  btrfs: use clear_page where appropriate
  ...

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch removes the need of subdir-y. Now all files/directories under
arch/<arch>/include/uapi/ are exported.

The only change for userland is the layout of the command 'make
headers_install_all': directories asm-<arch> are replaced by arch-<arch>/.
Those new directories contains all files/directories of the specified arch.

Note that only cris and tile have more directories than only asm:
 - arch-v[10|32] for cris;
 - arch for tile.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Regularly, when a new header is created in include/uapi/, the developer
forgets to add it in the corresponding Kbuild file. This error is usually
detected after the release is out.

In fact, all headers under uapi directories should be exported, thus it's
useless to have an exhaustive list.

After this patch, the following files, which were not exported, are now
exported (with make headers_install_all):
asm-arc/kvm_para.h
asm-arc/ucontext.h
asm-blackfin/shmparam.h
asm-blackfin/ucontext.h
asm-c6x/shmparam.h
asm-c6x/ucontext.h
asm-cris/kvm_para.h
asm-h8300/shmparam.h
asm-h8300/ucontext.h
asm-hexagon/shmparam.h
asm-m32r/kvm_para.h
asm-m68k/kvm_para.h
asm-m68k/shmparam.h
asm-metag/kvm_para.h
asm-metag/shmparam.h
asm-metag/ucontext.h
asm-mips/hwcap.h
asm-mips/reg.h
asm-mips/ucontext.h
asm-nios2/kvm_para.h
asm-nios2/ucontext.h
asm-openrisc/shmparam.h
asm-parisc/kvm_para.h
asm-powerpc/perf_regs.h
asm-sh/kvm_para.h
asm-sh/ucontext.h
asm-tile/shmparam.h
asm-unicore32/shmparam.h
asm-unicore32/ucontext.h
asm-x86/hwcap2.h
asm-xtensa/kvm_para.h
drm/armada_drm.h
drm/etnaviv_drm.h
drm/vgem_drm.h
linux/aspeed-lpc-ctrl.h
linux/auto_dev-ioctl.h
linux/bcache.h
linux/btrfs_tree.h
linux/can/vxcan.h
linux/cifs/cifs_mount.h
linux/coresight-stm.h
linux/cryptouser.h
linux/fsmap.h
linux/genwqe/genwqe_card.h
linux/hash_info.h
linux/kcm.h
linux/kcov.h
linux/kfd_ioctl.h
linux/lightnvm.h
linux/module.h
linux/nbd-netlink.h
linux/nilfs2_api.h
linux/nilfs2_ondisk.h
linux/nsfs.h
linux/pr.h
linux/qrtr.h
linux/rpmsg.h
linux/sched/types.h
linux/sed-opal.h
linux/smc.h
linux/smc_diag.h
linux/stm.h
linux/switchtec_ioctl.h
linux/vfio_ccw.h
linux/wil6210_uapi.h
rdma/bnxt_re-abi.h

Note that I have removed from this list the files which are generated in every
exported directories (like .install or .install.cmd).

Thanks to Julien Floret <julien.floret@6wind.com> for the tip to get all
subdirs with a pure makefile command.

For the record, note that exported files for asm directories are a mix of
files listed by:
 - include/uapi/asm-generic/Kbuild.asm;
 - arch/<arch>/include/uapi/asm/Kbuild;
 - arch/<arch>/include/asm/Kbuild.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Salter <msalter@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch prepares the uapi export by fixing the following error:

.../linux/smc_diag.h:6:27: fatal error: rdma/ib_verbs.h: No such file or directory
 #include <rdma/ib_verbs.h>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch prepares the uapi export by fixing the following errors:

.../linux/btrfs_tree.h:283:2: error: #error "UUID items require BTRFS_UUID_SIZE == 16!"
 #error "UUID items require BTRFS_UUID_SIZE == 16!"

.../linux/btrfs_tree.h:390:12: error: ‘BTRFS_UUID_SIZE’ undeclared here (not in a function)
  __u8 uuid[BTRFS_UUID_SIZE];
            ^
.../linux/btrfs_tree.h:796:16: error: ‘BTRFS_DEV_STAT_VALUES_MAX’ undeclared here (not in a function)
  __le64 values[BTRFS_DEV_STAT_VALUES_MAX];
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Some files will be exported after a following patch. 0-day tests report the
following warning/error:
./usr/include/linux/bcache.h:8: include of <linux/types.h> is preferred over <asm/types.h>
./usr/include/linux/bcache.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/qrtr.h:8: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/cryptouser.h:39: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/pr.h:14: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/linux/btrfs_tree.h:337: found __[us]{8,16,32,64} type without #include <linux/types.h>
./usr/include/rdma/bnxt_re-abi.h:45: found __[us]{8,16,32,64} type without #include <linux/types.h>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>