- 04 Dec, 2014 20 commits
-
-
Mauro Carvalho Chehab authored
While writing changeset fdf1bc9f, I noticed some checkpatch complains about the CodingStyle for function parameters. So, clean them. While here, also removes uneeded "extern" from function prototype. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
This patch is basically produced while testing a tool that Joe Perches sent upstream sometime ago: https://lkml.org/lkml/2014/7/11/794 I used it with those arguments: $ reformat_with_checkpatch.sh drivers/media/usb/em28xx/em28xx*.[ch] It actually produced 24 patches, with is too much, and showed interesting things: gcc produced different codes on most of the patches, even with just linespace changes. The total code data remained the same on all cases I checked though. Anyway, provided that we fold the resulting patches, this tool seems useful. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Olli Salonen authored
This patch adds support for new type of firmware versions of Si2168 chip. Old type: n x 8 bytes (all data, first byte seems to be 04 or 05) New type: n x 17 bytes (1 byte indicates len and max 16 bytes data) New version of TechnoTrend CT2-4400 drivers (http://www.tt-downloads.de/bda-treiber_4.3.0.0.zip) contains newer firmware for Si2168-B40 that is in the new format. It can be extracted with the following command: dd if=ttTVStick4400_64.sys ibs=1 skip=323872 count=6919 of=dvb-demod-si2168-b40-01.fw Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Olli Salonen authored
A debug printout for firmware version. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Josh Wu authored
SVGA height should be 600 not 680. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/tuners/tda18271-common.c:176 tda18271_read_extended() warn: if statement not indented Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Drivers that use dvb_attach can have just one exported symbol, or they will cause compilation breakages depending on the selected frontends. As Jim reported: drivers/built-in.o: In function `technisat_usb2_set_voltage': technisat-usb2.c:(.text+0x3b4919): undefined reference to `stv090x_set_gpio' make: *** [vmlinux] Error 1 That happens because, on his configuration, the configuration is: CONFIG_DVB_USB=y CONFIG_DVB_STV090x=m Luis proposed ar way to fix, but that would just force the STV090x to be selected, even if one wants to use a device with a different frontend. Instead, let's do the right thing: move set_gpio to the configuration structure and fill it during dvb_attach(). This way, the driver can still call it, and dvb_attach() will load stv090x module only if the device really needs it. Reported by: Jim Davis <jim.epost@gmail.com> Cc: Luis Rodriguez <mcgrof@suse.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nibble Max authored
Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Tested-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nibble Max authored
Remove TechnoTrend CT2-4400 and CT2-4650 devices from cxusb. They are supported by dvb-usb-dvbsky driver in PATCH 3/3. Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nibble Max authored
DVBSky T330 dvb-t2/t/c usb stick: 1>dvb frontend: SI2157A30(tuner), SI2168B40(demod) 2>usb controller: CY7C68013A Signed-off-by: Nibble Max <nibble.max@gmail.com> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Fixes following build warnings: gsc-core.c:350:17: warning: 'low_plane' may be used uninitialized gsc-core.c:371:31: warning: 'high_plane' may be used uninitialized Reported-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Recent rtl28xxu patch I made moved demod ADC enable from power control to frontend control (due to slave demod support). Because of that we need call USB interface frontend control too in order to enable ADC. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The function releases the queue if the file being released is the queue owner. The check reads the queue->owner field without taking the queue lock, creating a race condition with functions that set the queue owner, such as vb2_ioctl_reqbufs() for instance. Fix this by moving the queue->owner check within the mutex protected section. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
The vb2_fop_poll() implementation tries to be clever on whether it needs to lock the queue mutex by checking whether polling might start fileio. The test requires reading the q->num_buffer field, which is racy if we don't hold the queue mutex in the first place. Remove the extra cleverness and just lock the mutex. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
Add support for selection target V4L2_SEL_TGT_NATIVE_SIZE. It is equivalent of what V4L2_SEL_TGT_CROP_BOUNDS used to be. Support for V4L2_SEL_TGT_CROP_BOUNDS is still supported by the driver as a compatibility interface. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
The fields were previously uninitialised, leaving the returned values to where the user had set them. This was never the intention. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
Add input and output capability flags for setting native size of the device, and document them. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
The V4L2_SEL_TGT_NATIVE_SIZE target is used to denote e.g. the size of a sensor's pixel array. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
The sub-device format documentation documented scaling configuration through formats. Instead the compose selection rectangle is elsewhere documented to be used for the purpose. Remove scaling related part of the documentation. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 02 Dec, 2014 16 commits
-
-
Hans Verkuil authored
When compiling under COMPILE_TEST on a x86_64 the following warnings appear: drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_uservirt_to_phys': drivers/media/platform/omap/omap_vout.c:209:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] return virt_to_phys((void *) virtp); ^ drivers/media/platform/omap/omap_vout.c: In function 'omapvid_setup_overlay': drivers/media/platform/omap/omap_vout.c:420:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat=] v4l2_dbg(1, debug, &vout->vid_dev->v4l2_dev, ^ drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_buffer_prepare': drivers/media/platform/omap/omap_vout.c:794:34: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] vout->queued_buf_addr[vb->i] = (u8 *) ^ In file included from arch/x86/include/asm/dma-mapping.h:44:0, from include/linux/dma-mapping.h:82, from drivers/media/platform/omap/omap_vout.c:40: drivers/media/platform/omap/omap_vout.c:803:58: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dma_addr = dma_map_single(vout->vid_dev->v4l2_dev.dev, (void *) addr, ^ include/asm-generic/dma-mapping-common.h:174:60: note: in definition of macro 'dma_map_single' #define dma_map_single(d, a, s, r) dma_map_single_attrs(d, a, s, r, NULL) ^ These are fixed by this patch. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Prabhakar Lad authored
This patch adds support in the capture driver for using vb2_ops_wait_prepare/finish() helpers provided by the vb2 core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Prabhakar Lad authored
This patch drops driver specific wait_prepare() and wait_finish() callbacks from vb2_ops and instead uses the the helpers vb2_ops_wait_prepare/finish() provided by the vb2 core, the lock member of the queue needs to be initalized to a mutex so that vb2 helpers vb2_ops_wait_prepare/finish() can make use of it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Prabhakar Lad authored
This patch drops driver specific wait_prepare() and wait_finish() callbacks from vb2_ops and instead uses the the helpers vb2_ops_wait_prepare/finish() provided by the vb2 core, the lock member of the queue needs to be initalized to a mutex so that vb2 helpers vb2_ops_wait_prepare/finish() can make use of it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Markus Elfring authored
The vb2_put_vma() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. In addition, remove the CAPTURE and OUTPUT caps for M2M devices. These were already slated for removal, so it's time to do so. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Kamil Debski <k.debski@samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Cc: Gerhard Sittig <gsi@denx.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Querycap should set the device_caps field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
This was missing in this driver, so add this functionality. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add support for YCbCr output and support setting colorspace, YCbCr encoding and quantization for the AVI InfoFrame. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Implement controls to set the YCbCr encoding and the quantization range for the colorspace. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add AdobeRGB and BT.2020 support. The colorspace control now orders the colorspaces according to how often they are used. So rarely used colorspaces are moved to the end. This makes it more logical when testing colorspace support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add support for the new AdobeRGB and BT.2020 colorspaces. Also support explicit Y'CbCr and quantization settings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
This extends the precalculated tpg_csc_colors matrix with AdobeRGB and BT.2020 colorspace support. It also adds two precalculated tables that convert between linear RGB and non-linear Rec.709 R'G'B' values, i.e. the Rec. 709 transfer function. This is needed to efficiently handle the BT.2020 Constant Luminance Yc'CbcCrc encoding and decoding. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 01 Dec, 2014 4 commits
-
-
Hans Verkuil authored
The colorspace chapter in the V4L2 Specification was always poorly written. This patch rewrites it, documenting the new Y'CbCr encoding and quantization defines and going into much more detail with respect to how colorspaces are used and what it all means. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Log the new ycbcr_enc and quantization fields. Note that it now also logs the flags field for the multiplanar buffer type. This was forgotten when the flags field was added. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add and copy the new ycbcr_enc and quantization fields. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add support for the new AdobeRGB and BT.2020 colorspaces as needed for HDMI 2.0. Add support to specify the Y'CbCr encoding and quantization range explicitly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-