- 01 May, 2017 7 commits
-
-
Dasaratharaman Chandramouli authored
Rename ib_create_ah to rdma_create_ah so its in sync with the rename of the ib address handle attribute Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Don Hiatt <don.hiatt@intel.com> Reviewed-by:
Sean Hefty <sean.hefty@intel.com> Reviewed-by:
Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by:
Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Dasaratharaman Chandramouli authored
This patch simply renames struct ib_ah_attr to rdma_ah_attr as these fields specify attributes that are not necessarily specific to IB. Reviewed-by:
-
Dasaratharaman Chandramouli authored
Zero out ib_ah_attr before calling query_ah. Set ah_flags appropriately. Reviewed-by:
-
Dasaratharaman Chandramouli authored
Read/write grh fields of the ah_attr only if the ah_flags field has the IB_AH_GRH bit enabled Reviewed-by:
-
Dasaratharaman Chandramouli authored
This patch adds braces around parameters to sizeof as called out by checkpatch Reviewed-by:
-
Dasaratharaman Chandramouli authored
This patch fixes a checkpatch issue related to not having to use an 'else' if the 'if' path returns from the function. Reviewed-by:
-
Dasaratharaman Chandramouli authored
Address a checkpatch issue on missing identifier names on function definitions. Reviewed-by:
-
- 28 Apr, 2017 33 commits
-
-
Dasaratharaman Chandramouli authored
For OPA devices, SA will query the OPA classport info instead of the IB defined classport info. opa classport info exposes additional information and capabilities that are specific to OPA devices. Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Dasaratharaman Chandramouli authored
Both opa_vnic and the hfi driver use the same opa_classport_info definition. We will also have ib_sa capable of querying opa class port info and would need this definition. Move it to ib_mad.h for everyone to use. Signed-off-by:
-
Dasaratharaman Chandramouli authored
rdma_cap_opa_ah(..) enables core components to check if the corresponding port supports OPA extended addressing. Reviewed-by:
-
Dasaratharaman Chandramouli authored
SA will query and cache class port info as part of its initialization. SA will also invalidate and refresh the cache based on specific events. Callers such as IPoIB and CM can query the SA to get the classportinfo information. Apart from making the caller code much simpler, this change puts the onus on the SA to query and maintain classportinfo much like how it maitains the address handle to the SM. Reviewed-by:
-
Dasaratharaman Chandramouli authored
Moving these will facilitate changes to these in the next patchs. This is strictly a move and there are no changes to the functions in any way. Reviewed-by:
-
Dasaratharaman Chandramouli authored
This fixes a checkpatch issue. The fix is needed so that some of these functions can be moved around in the forthcoming patches Reviewed-by:
-
Dasaratharaman Chandramouli authored
This fixes a checkpatch issue. The fix is needed so that some of these functions can be moved around in the forthcoming patches Reviewed-by:
-
Dasaratharaman Chandramouli authored
This fixes a checkpatch issue. The fix is needed so that some of these functions can be moved around in the forthcoming patches Reviewed-by:
-
Dennis Dalessandro authored
The process_ecn intends to return a bool value. However it is doing so incorrectly by ANDing the fecn mask. The fecn bit is bit 31. Bool is not a native data type and is up to the compiler to implement how it sees fit. It is conceivable that this upper bit gets washed out. Fix by converting to a bool properly. Cc: stable@vger.kernel.org Fixes: Commit fd2b562edca6 ("IB/hfi1: Pull FECN/BECN processing to a common place") Reviewed-by:Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Ira Weiny authored
The device/port status is not intended to be changed from user space. Prevent a user from mapping them as write or execute. Reviewed-by:
-
Dennis Dalessandro authored
Add missing braces around else blocks in a few places to make checkpatch happy. Fixes: 77241056 ("IB/hfi1: add driver files") Signed-off-by:
-
Dennis Dalessandro authored
According to checkpatch %Lx is not standard C so remove it and use the suggested %llx. Fixes: 77241056 ("IB/hfi1: add driver files") Signed-off-by:
-
Dennis Dalessandro authored
Checkpatch flagged a misspelled word. Fix it. Fixes: 8764522e ("staging/rdma/hfi1: Unexpected link up pkey values are not an error") Signed-off-by:
-
Neel Desai authored
Ingress and egress port P_Key checking should always be performed for HFIs. This patch will enable ingress and egress P_Key checking when the port is initialized and will ignore the P_Key information sent by the FM in the port info structure which is meant to be used only by the switch. Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by:
Neel Desai <neel.desai@intel.com> Signed-off-by:
-
Stuart Summers authored
Secure data is transferred across the link during verify cap. This includes Neighbor Guid, Type, and Port Number. This transfer is not guaranteed to complete until the 8051 firmware has completed processing of the state_complete frame. Move the consumption of this data from verify cap handling to link up handling to ensure the data is finalized. Additionally, do not notify the SM that the link is up until after this data is actually available. Reviewed-by:
Stuart Summers <john.s.summers@intel.com> Signed-off-by:
-
Neel Desai authored
When we receive a QSFP_HIGH_TEMP_ALARM or QSFP_HIGH_TEMP_WARNING interrupt, print a "QSFP cable temperature too high" message. Reviewed-by:
-
Tadeusz Struk authored
Soft lockups can occur because the mad processing on different CPUs acquire the spin lock dc8051_lock: [534552.835870] [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1] [534552.835880] [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1] [534552.835893] [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1] [534552.835904] [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1] [534552.835908] [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0 [534552.835936] [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core] [534552.835939] [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240 [534552.835947] [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core] [534552.835955] [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core] [534552.835962] [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core] [534552.835964] [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [534552.835966] [<ffffffff810a8d76>] worker_thread+0x126/0x410 [534552.835969] [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [534552.835971] [<ffffffff810b052f>] kthread+0xcf/0xe0 [534552.835974] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [534552.835977] [<ffffffff81696418>] ret_from_fork+0x58/0x90 [534552.835980] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 This issue is made worse when the 8051 is busy and the reads take longer. Fix by using a non-spinning lock procure. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The driver progress routines can call cond_resched() when a timeslice is exhausted and irqs are enabled. If the ULP had been holding a spin lock without disabling irqs and the post send directly called the progress routine, the cond_resched() could yield allowing another thread from the same ULP to deadlock on that same lock. Correct by replacing the current hfi1_do_send() calldown with a unique one for post send and adding an argument to hfi1_do_send() to indicate that the send engine is running in a thread. If the routine is not running in a thread, avoid calling cond_resched(). CC: <stable@vger.kernel.org> # 4.7.x- Fixes: Commit 831464ce ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets") Reviewed-by:
-
Don Hiatt authored
Move FECN and BECN related defines to common header files Reviewed-by:
-
Don Hiatt authored
These inline functions improve code readability by enabling callers to read specific fields from the header without knowledge of byte offsets. Reviewed-by:
-
Dasaratharaman Chandramouli authored
The function really returned the 5-bit sc value from the header and rhf. hdr2sc didn't quite describe what it did. Reviewed-by:
-
Sebastian Sanchez authored
VL15 in the SC2VL table is used to indicate an invalid SC for the FM, however, internally the driver remaps SCs from VL15 to ILLEGAL_VL to prevent error counts. This mapping confuses the FM when performing a sweep, making it return a table mismatch error. Have SMA convert ILLEGAL_VL to VL15 entries for the SC2VL table queries. Reviewed-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
Improve the safety of the code by validating the user supplied tidcnt before use. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by:
-
Michael J. Ruhl authored
The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). The current code only uses the MGID for identifying multicast groups. Update the driver to be compliant with this definition. Reviewed-by:
-
Michael J. Ruhl authored
The Infiniband spec defines "A multicast address is defined by a MGID and a MLID" (section 10.5). Currently the MLID value is not validated. Add check to verify that the MLID value is in the correct address range. Fixes: 0c33aeed ("[IB] Add checks to multicast attach and detach") Cc: stable@vger.kernel.org Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Michael J. Ruhl authored
The FM uses the values of MulticastMask and CollectiveMask to determine the number of bits for net masks. The current values of 0 and 0 are incorrect. The values should be 4 and 1. Updated the necessary code to reflect the specified values. Reviewed-by:
-
Michael J. Ruhl authored
A list of MGID/MLID pairs is built when doing a multicast attach. When the multicast detach is called, the list is searched, and regardless of the search outcome, the driver detach is called. If an MGID/MLID pair is not on the list, driver detach should not be called, and an error should be returned. Calling the driver without removing an MGID/MLID pair from the list can leave the core and driver out of sync. Fixes: f4e40156 ("IB/uverbs: track multicast group membership for userspace QPs") Cc: stable@vger.kernel.org Reviewed-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by:
-
Geliang Tang authored
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by:
-
Leon Romanovsky authored
Fix mismatch between types, wqe_words are in le32 format, while opcode in CPU format. The following sparse warnings are helped to find it: drivers/infiniband/hw/nes/nes_hw.c:3058:24: warning: incorrect type in assignment (different base types) drivers/infiniband/hw/nes/nes_hw.c:3058:24: expected unsigned int [unsigned] [assigned] [usertype] opcode drivers/infiniband/hw/nes/nes_hw.c:3058:24: got restricted __le32 <noident> CC: Faisal Latif <faisal.latif@intel.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Leon Romanovsky authored
Simplify code in find_free_vf_and_create_qp_grp() to avoid sparse error regarding call to unlock in the block other than lock was called. drivers/infiniband/hw/usnic/usnic_ib_verbs.c:206:9: warning: context imbalance in 'find_free_vf_and_create_qp_grp' - different lock contexts for basic block CC: Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Leon Romanovsky authored
Sparse tool complains about undeclared symbols in usnic_ib_verbs.c and usnic_ib_sysfs.c This is caused by lack of direct include of appropriate usnic_ib_verbs.h and usnic_ib_sysfs.h, where all these functions were declared. Simple include eliminates 30 warnings similar to the below one: drivers/infiniband/hw/usnic/usnic_ib_sysfs.c:304:6: warning: symbol 'usnic_ib_sysfs_unregister_usdev' was not declared. Should it be static? CC: Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
