- 17 Nov, 2011 15 commits
-
-
david decotigny authored
This adds code to update the stats counter for dropped RX frames. Signed-off-by:
David Decotigny <david.decotigny@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
david decotigny authored
This commit implements the ndo_get_stats64() API for forcedeth. Since hardware stats are being updated from different contexts (process and timer), this commit adds synchronization. For software stats, it relies on the u64_stats_sync.h API. Tested: - 16-way SMP x86_64 -> RX bytes:7244556582 (7.2 GB) TX bytes:181904254 (181.9 MB) - pktgen + loopback: identical rx_bytes/tx_bytes and rx_packets/tx_packets Signed-off-by: -
Sameer Nanda authored
This adds a new module parameter "debug_tx_timeout" to silence most debug messages in case of TX timeout. These messages don't provide a signal/noise ratio high enough for production systems and, with ~30kB logged each time, they tend to add to a cascade effect if the system is already under stress (memory pressure, disk, etc.). By default, the parameter is clear, meaning that only a single warning will be reported. Signed-off-by:
-
Mike Ditto authored
This adds a few kernel messages to indicate whether PCIe interrupts are signaled with MSI or MSI-X. Signed-off-by:
-
david decotigny authored
This adds the /sys/class/net/DEV/queues/Q/tx_timeout attribute containing the total number of timeout events on the given queue. It is always available with CONFIG_SYSFS, independently of CONFIG_RPS/XPS. Credits to Stephen Hemminger for a preliminary version of this patch. Tested: without CONFIG_SYSFS (compilation only) with sysfs and without CONFIG_RPS & CONFIG_XPS with sysfs and without CONFIG_RPS with sysfs and without CONFIG_XPS with defaults Signed-off-by:
-
david decotigny authored
This commit fixes following warning: net/core/net-sysfs.c:921:6: warning: symbol 'numa_node' shadows an earlier one include/linux/topology.h:222:1: originally declared here Signed-off-by:
-
david decotigny authored
This change makes sure that tx_packets/rx_bytes ifconfig counters are updated even on NICs that don't provide hardware support for these stats: they are now updated in software. For the sake of consistency, we also now have tx_bytes updated in software (hardware counters include ethernet CRC, and software doesn't account for it). This reverts parts of: - "forcedeth: statistics optimization" (21828163) - "forcedeth: Improve stats counters" (0bdfea8b) - "forcedeth: remove unneeded stats updates" (4687f3f3) Tested: pktgen + loopback (http://patchwork.ozlabs.org/patch/124698/) reports identical tx_packets/rx_packets and tx_bytes/rx_bytes. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
Save some punctuation by using bool type's property equivalent to doubled negation operator. Reported-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Michał Mirosław authored
Add missing spaces around multiplication operator. Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
Joe Perches authored
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by:
-
- 16 Nov, 2011 25 commits
-
-
Matt Carlson authored
Translating between ethtool advertisement settings and MII advertisements are common operations for ethernet drivers. This patch adds a set of helper functions that implements the conversion. The patch then modifies a couple of the drivers to use the new functions. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
-
Jiri Pirko authored
Since multiple team instances are putting defined options into their option list, during register each option must be cloned before added into list. This resolves uncool memory corruptions when using multiple teams. Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Jiri Pirko authored
No need to have spinlock for this purpose. So convert this to mutex and avoid current schedule while atomic problems in netlink code. Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Dan Carpenter authored
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb() in lowpan_fragment_xmit() is a double free. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by:
-
Padmanabh Ratnakar authored
Use V1 version of query link status command for Lancer. Signed-off-by:
Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by:
-
Padmanabh Ratnakar authored
To enable VLAN promiscous mode, the HW interface should be created with VLAN promiscous capability in Lancer. Add this capability during creation of the HW interface. Signed-off-by:
-
Padmanabh Ratnakar authored
Implemented eeprom dump using ethtool feature for Lancer. Signed-off-by:
-
Padmanabh Ratnakar authored
Implement register dump using ethtool for Lancer. Signed-off-by:
-
Padmanabh Ratnakar authored
Lancer uses V1 version of TXQ create. This command needs interface id for TX queue creation. Rearrange code such that tx queue create is after interface create. As TXQ create is now called after MCC ring create use MCC instead of MBOX. Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Michał Mirosław authored
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
v2: changed loop in ethtool_set_features() per Ben's suggestion Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Define feature values by bit position instead of direct 2**i values and force the values to be of type netdev_features_t. Cleaned and extended from patch by Mahesh Bandewar <maheshb@google.com>: + added netdev_features_t casts + included bits under NETIF_F_GSO_MASK + moved feature #defines out of struct net_device definition Signed-off-by:
-
Michał Mirosław authored
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by:
-
Michał Mirosław authored
Move features definitions to separate header so that linux/skbuff.h won't need to include linux/netdevice.h after netdev_features_t is introduced. Signed-off-by:
-
Michał Mirosław authored
This is the only place left where dev->features are directly exposed to userspace. I know checkpatch.pl complains about __ethtool_{get,set}_flags(), but the code is easier to read this way. Signed-off-by: -
Michał Mirosław authored
As all drivers are converted, we may now remove discrete offload setting callback handling. Signed-off-by:
-
Rick Jones authored
Convert some remaining straglers' .get_drvinfo routines to use strlcpy rather than strcpy/strncpy. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
-
Eric Dumazet authored
netstamp_needed seems a good candidate to jump_label conversion. This avoids 3 conditional branches per incoming packet in fast path. No measurable difference, given that these conditional branches are predicted on modern cpus. Only a small icache reduction, thanks to the unlikely() stuff. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Rick Jones authored
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by:
-
Joe Perches authored
Use the normal #defines not module specific ones. Signed-off-by:
Stephen Ko <stephen.s.ko@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
