- 28 Feb, 2011 6 commits
-
-
adam radford authored
Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
adam radford authored
Signed-off-by:
-
adam radford authored
Signed-off-by:
-
jack_wang authored
In some test envirenment, there is loopback topology test. We should handle this during discovery. Signed-off-by:
Jack Wang <jack_wang@usish.com> Signed-off-by:
-
Mike Christie authored
Instead of blocking the entire host when the port's queueing limit is hit, we should only block the port's target. This will allow IO to other ports to execute. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Mike Christie authored
If the port takes a while to transition we could exhaust the retries when using DID_TRANSPORT_DISRUPTED. For this case we do not want to use any of the cmd's retries, because if the command was running then when it got failed the retry counter was already incremented. And if this is the first time we are seeing the command, (it got queued because it slipped through during the race) then it should not have its retries incremented. The fc class will decide the correct handling later. Signed-off-by:
-
- 25 Feb, 2011 24 commits
-
-
Madhuranath Iyengar authored
We'll be using the new version number scheme from now on. The 'k' in the version in the past will be removed. The format will be: <major>.<minor>.<sub_minor>.<iter> A scsi-misc submission increments <sub_minor> and resets <iter>. An scsi-rc-fixes submission, increments <iter>. Signed-off-by:
Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
The fc_block_scsi_eh() might return with status FAST_IO_FAIL indicating I/O has been terminated due to fast_io_fail timeout. In this case the rport is still blocked, so any error recovery will be failing on this port. Hence we need to check if the return value from fc_block_scsi_eh() is something other than 0, in which case it should just return with that status. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Saurav Kashyap authored
If adapter is not online, the driver will not process the response queue, even on getting an interrupt. Signed-off-by:
Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Based on reading of the FCP2/4 specification, the driver cannot expect the storage device to send FCP_RSP information. Instead, the driver should interpret the data which is present in the frame to base decisions on the success or failure of the system. Signed-off-by:
-
Andrew Vasquez authored
By not clearing the 'login needed' nor 'login outstanding' states for an fcport after a big-hammer (adapter reset), the driver may not properly perform a PLOGI/PRLI sequence (and lose visibility to the rport) during a follow-on SNS scan. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
-
Chad Dupuis authored
The additional increment of dsd_seg was causing the compiler to throw an array out of bounds warning. This patch moves to a direct assignment of cmd_pkt->fcp_data_dseg_len so that the compiler doesn't generate an array out bounds warning. Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Madhuranath Iyengar authored
Also in qla_os.c, rename the function, remove DEF_SCSI_QCMD, etc. Signed-off-by:
-
Christof Schmitt authored
Query the FC symbolic port name for reporting in the fc_host sysfs and enable the symbolic_name attribute in the fc_host sysfs. When running in NPIV mode, extend the symbolic port name with the devno and the hostname. This allows better identification of Linux systems for SAN and storage administrators. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Add request code and corresponding structs for "Get Symbolic Port Name" (GSPN_ID) request. Signed-off-by:
-
Christof Schmitt authored
The SCSI host and transport templates are the only members left in the global zfcp_data struct. Move them out of zfcp_data and remove the now unused zfcp_data struct. Also update the names of the register and unregister functions to use the zfcp_scsi prefix. Signed-off-by:
-
Christof Schmitt authored
For task management commands, only LUN and flags are required. The regular FCP setup already sets the LUN in the fcp_cmnd. All is required for merging the function is setting up the TM flags. Signed-off-by:
-
Christof Schmitt authored
Move the kmem_cache for allocating the qtcb to zfcp_fsf.c and rename it accordingly. Signed-off-by:
-
Christof Schmitt authored
Switch the allocation of the GPN_FT request data to the FC kmem_cache and remove the zfcp_gpn kmem_cache. Signed-off-by:
-
Christof Schmitt authored
Allocate the data for the GID_PN request through the new FC kmem_cache. While updating the GID_PN code, also introduce a helper function for initializing the CT header for FC nameserver requests. Remove the "paranoia" check as well, the GID_PN request data does not suddenly change. Signed-off-by:
-
Christof Schmitt authored
A data buffer that is passed to the hardware must not cross a page boundary. zfcp uses a series of kmem_caches to align the data to not cross a page boundary. Introduce a new kmem_cache for the FC requests sent from the zfcp driver and use it for the ELS ADISC data. The goal is to migrate to the FC kmem_cache in later patches and remove the request specific kmem_caches. Signed-off-by:
-
Christof Schmitt authored
zfcp requires a mempool for the status read data blocks to resubmit the "status read" requests at any time. Each status read data block has the size of a page (4096 bytes) and needs to be placed in one page. Instead of having a kmem_cache for allocating page sized chunks, use mempool_create_page_pool to create a mempool returning pages and remove the zfcp kmem_cache. Signed-off-by:
-
Christof Schmitt authored
Signed-off-by:
-
Tobias Klauser authored
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 24 Feb, 2011 10 commits
-
-
Mike Christie authored
The ep_disconnect function could be freeing the ep while beiscsi_conn_get_param is running. This has the driver use the get ep param callback instead of the get conn param to fix this. Signed-off-by:
-
Mike Christie authored
This pactch has iser export the address and port of the endpoint. Signed-off-by:
-
Mike Christie authored
bnx2i has some checks to try and make sure the ep is not destroyed while the addr/port is getting read. However, if after this check: if (!(bnx2i_conn && bnx2i_conn->ep && bnx2i_conn->ep->hba)) goto out; bnx2i_conn->ep is cleared by ep_disconnect then we will oops. This patches fixes the problem by having the driver use the get_ep_param callback instead of get_conn_param. Signed-off-by:
-
Mike Christie authored
This has cxgbi use the iscsi_conn_get_addr_param helper and the get ep callback. Signed-off-by:
-
Mike Christie authored
For drivers using the ep callbacks the addr and port are attached to the endpoint instead of the conn. This adds a callout to the iscsi_transport to get ep values. It also adds locking around the get param call to make sure that ep_disconnect does not free the LLD's ep interconnect structs from under us (the ep has a refcount so it will not go away but the LLD may have structs from other subsystems that are not allocated in the ep so we need to protect them from getting freed). Signed-off-by:
-
Mike Christie authored
This has iscsi_tcp use the iscsi_conn_get_addr_param libiscsi function. It also drops the use of the libiscsi session portal buffers, so they can be removed in the next patches. Instead of copying the values at bind time we get them during get() time. If we are not connected userspace will now get -ENOTCONN, so it knows that connection is disconnected instead of a possible stale value. Signed-off-by:
-
Mike Christie authored
This adds a helper to convert a addr struct to a string. This will be used by the drivers in the next patches. Signed-off-by:
-
Mike Christie authored
The active variable on the iscsi_cls_conn is not used so this patch removes it. Signed-off-by:
-
Mike Christie authored
When iscsid restarts it does not know the connection's endpoint, so it is getting leaked. This fixes the problem by having the iscsi class force a disconnect before a new connection is bound. Signed-off-by:
-
Mike Christie authored
cxgb3i and cxgb4i support TEXT PDU offloading, so set the bits to enable it. Signed-off-by:
-
