- 03 Jul, 2014 11 commits
-
-
Vince Bridgers authored
This patch adds platform init/exit functions and modifications to support suspend/resume for the Altera Cyclone 5 SOC Ethernet controller. The platform exit function puts the controller into reset using the socfpga reset controller driver. The platform init function sets up the Synopsys mac by first making sure the Ethernet controller is held in reset, programming the phy mode through external support logic, then deasserts reset through the socfpga reset manager driver. Signed-off-by:
Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alexander Aring authored
The max_dsize attribute in ctl_table for lowpan_frags_ns_ctl_table is configured with integer accessing methods. This patch change the max_dsize attribute to int to avoid a possible buffer overflow. Signed-off-by:
Alexander Aring <alex.aring@gmail.com> Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== Mellanox EN driver fixes 2014-06-23 Below are some fixes to patches submitted to 3.16. First patch is according to discussions with Ben [1] and Thomas [2] - to do not use affinity notifier, since it breaks RFS. Instead detect changes in IRQ affinity map, by checking if current CPU is set in affinity map on NAPI poll. The two other patches fix some bugs introduced in commit [3]. Patches were applied and tested over commit dba63115: ('powerpc: bpf: Fix the broken LD_VLAN_TAG_PRESENT test') ==================== Signed-off-by:
-
Amir Vadai authored
Need to remove affinity hint at mlx4_en_deactivate_cq() and not at mlx4_en_destroy_cq() - since affinity_mask might be free'd while still being used by procfs. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Amir Vadai authored
When device is non numa aware (numa_node == -1), use all online cpu's. Signed-off-by:
-
Amir Vadai authored
IRQ affinity notifier can only have a single notifier - cpu_rmap notifier. Can't use it to track changes in IRQ affinity map. Detect IRQ affinity changes by comparing CPU to current IRQ affinity map during NAPI poll thread. CC: Thomas Gleixner <tglx@linutronix.de> CC: Ben Hutchings <ben@decadent.org.uk> Fixes: 2eacc23c ("net/mlx4_core: Enforce irq affinity changes immediatly") Signed-off-by:
-
Maciej W. Rozycki authored
This fixes compilation warnings: drivers/net/fddi/defxx.c:294: warning: 'dfx_rcv_flush' declared inline after being called drivers/net/fddi/defxx.c:294: warning: previous declaration of 'dfx_rcv_flush' was here drivers/net/fddi/defxx.c:2854: warning: 'my_skb_align' defined but not used triggered when the driver is built with DYNAMIC_BUFFERS undefined. Code tested to work just fine with these changes and a few DEFPA and DEFTA boards. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Maciej W. Rozycki authored
The RX handler of the driver has two paths switched between, depending on the size of the frame received, as determined by SKBUFF_RX_COPYBREAK. When a small frame is received, a new skb allocated has data space large enough to hold the incoming frame only, and data is copied there from the original skb whose buffer is returned to the DMA RX ring; in that case `rx_in_place' is 0. When a large frame is received, a new skb allocated has data space large enough to hold the largest frame possible, including the overhead for alignment, the receive status and padding, over 4.5kiB overall, and its buffer is placed on the DMA RX ring while the original buffer is passed up to the network stack avoiding the need to copy data; in that case `rx_in_place' is 1. However the latter scenario is only possible when dynamic buffers are used, as determined by DYNAMIC_BUFFERS, because otherwise the buffers used for the DMA RX ring are fixed at the time the interface is brought up. That leads to an observation that the preprocessor conditional around the `rx_in_place' check is inverted, the check only really matters when dynamic buffers are in use. It has gone unnoticed for many years since support for using dynamic buffers on the DMA RX ring was introduced in 2.1.40 -- because the only problem that results is in the case where `rx_in_place' is 1 frame data received is unnecessarily copied to the newly-allocated buffer, before the buffer placed on the the DMA receive RX and its contents ignored. Therefore the only symptom is some performance loss. Rather than flipping the condition though I decided to discard the conditional altogether -- in the case of static buffers `rx_in_place' is always 0 so GCC will optimise the C conditional away instead. Tested on a few DEFPA and DEFTA boards successfully using both small and large frames, both with DYNAMIC_BUFFERS defined and with the macro undefined. Signed-off-by:
-
Christoph Paasch authored
When in repair-mode and TCP_RECV_QUEUE is set, we end up calling tcp_push with mss_now being 0. If data is in the send-queue and tcp_set_skb_tso_segs gets called, we crash because it will divide by mss_now: [ 347.151939] divide error: 0000 [#1] SMP [ 347.152907] Modules linked in: [ 347.152907] CPU: 1 PID: 1123 Comm: packetdrill Not tainted 3.16.0-rc2 #4 [ 347.152907] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 347.152907] task: f5b88540 ti: f3c82000 task.ti: f3c82000 [ 347.152907] EIP: 0060:[<c1601359>] EFLAGS: 00210246 CPU: 1 [ 347.152907] EIP is at tcp_set_skb_tso_segs+0x49/0xa0 [ 347.152907] EAX: 00000b67 EBX: f5acd080 ECX: 00000000 EDX: 00000000 [ 347.152907] ESI: f5a28f40 EDI: f3c88f00 EBP: f3c83d10 ESP: f3c83d00 [ 347.152907] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 347.152907] CR0: 80050033 CR2: 083158b0 CR3: 35146000 CR4: 000006b0 [ 347.152907] Stack: [ 347.152907] c167f9d9 f5acd080 000005b4 00000002 f3c83d20 c16013e6 f3c88f00 f5acd080 [ 347.152907] f3c83da0 c1603b5a f3c83d38 c10a0188 00000000 00000000 f3c83d84 c10acc85 [ 347.152907] c1ad5ec0 00000000 00000000 c1ad679c 010003e0 00000000 00000000 f3c88fc8 [ 347.152907] Call Trace: [ 347.152907] [<c167f9d9>] ? apic_timer_interrupt+0x2d/0x34 [ 347.152907] [<c16013e6>] tcp_init_tso_segs+0x36/0x50 [ 347.152907] [<c1603b5a>] tcp_write_xmit+0x7a/0xbf0 [ 347.152907] [<c10a0188>] ? up+0x28/0x40 [ 347.152907] [<c10acc85>] ? console_unlock+0x295/0x480 [ 347.152907] [<c10ad24f>] ? vprintk_emit+0x1ef/0x4b0 [ 347.152907] [<c1605716>] __tcp_push_pending_frames+0x36/0xd0 [ 347.152907] [<c15f4860>] tcp_push+0xf0/0x120 [ 347.152907] [<c15f7641>] tcp_sendmsg+0xf1/0xbf0 [ 347.152907] [<c116d920>] ? kmem_cache_free+0xf0/0x120 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c114f0f0>] ? do_wp_page+0x3e0/0x850 [ 347.152907] [<c161c36a>] inet_sendmsg+0x4a/0xb0 [ 347.152907] [<c1150269>] ? handle_mm_fault+0x709/0xfb0 [ 347.152907] [<c15a006b>] sock_aio_write+0xbb/0xd0 [ 347.152907] [<c1180b79>] do_sync_write+0x69/0xa0 [ 347.152907] [<c1181023>] vfs_write+0x123/0x160 [ 347.152907] [<c1181d55>] SyS_write+0x55/0xb0 [ 347.152907] [<c167f0d8>] sysenter_do_call+0x12/0x28 This can easily be reproduced with the following packetdrill-script (the "magic" with netem, sk_pacing and limit_output_bytes is done to prevent the kernel from pushing all segments, because hitting the limit without doing this is not so easy with packetdrill): 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +0.1 < . 1:1(0) ack 1 win 65000 +0 accept(3, ..., ...) = 4 // This forces that not all segments of the snd-queue will be pushed +0 `tc qdisc add dev tun0 root netem delay 10ms` +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=2` +0 setsockopt(4, SOL_SOCKET, 47, [2], 4) = 0 +0 write(4,...,10000) = 10000 +0 write(4,...,10000) = 10000 // Set tcp-repair stuff, particularly TCP_RECV_QUEUE +0 setsockopt(4, SOL_TCP, 19, [1], 4) = 0 +0 setsockopt(4, SOL_TCP, 20, [1], 4) = 0 // This now will make the write push the remaining segments +0 setsockopt(4, SOL_SOCKET, 47, [20000], 4) = 0 +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=130000` // Now we will crash +0 write(4,...,1000) = 1000 This happens since ec342325 (tcp: fix retransmission in repair mode). Prior to that, the call to tcp_push was prevented by a check for tp->repair. The patch fixes it, by adding the new goto-label out_nopush. When exiting tcp_sendmsg and a push is not required, which is the case for tp->repair, we go to this label. When repairing and calling send() with TCP_RECV_QUEUE, the data is actually put in the receive-queue. So, no push is required because no data has been added to the send-queue. Cc: Andrew Vagin <avagin@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Fixes: ec342325 (tcp: fix retransmission in repair mode) Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by:
Andrew Vagin <avagin@openvz.org> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Eric Dumazet authored
sk_dst_cache has __rcu annotation, so we need a cast to avoid following sparse error : include/net/sock.h:1774:19: warning: incorrect type in initializer (different address spaces) include/net/sock.h:1774:19: expected struct dst_entry [noderef] <asn:4>*__ret include/net/sock.h:1774:19: got struct dst_entry *dst Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Fixes: 7f502361 ("ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fix") Signed-off-by:
-
Eric Dumazet authored
Madalin-Cristian reported crashs happening after a recent commit (5a4ae5f6 "vlan: unnecessary to check if vlan_pcpu_stats is NULL") ----------------------------------------------------------------------- root@p5040ds:~# vconfig add eth8 1 root@p5040ds:~# vconfig rem eth8.1 Unable to handle kernel paging request for data at address 0x2bc88028 Faulting instruction address: 0xc058e950 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=8 CoreNet Generic Modules linked in: CPU: 3 PID: 2167 Comm: vconfig Tainted: G W 3.16.0-rc3-00346-g65e85bf #2 task: e7264d90 ti: e2c2c000 task.ti: e2c2c000 NIP: c058e950 LR: c058ea30 CTR: c058e900 REGS: e2c2db20 TRAP: 0300 Tainted: G W (3.16.0-rc3-00346-g65e85bf) MSR: 00029002 <CE,EE,ME> CR: 48000428 XER: 20000000 DEAR: 2bc88028 ESR: 00000000 GPR00: c047299c e2c2dbd0 e7264d90 00000000 2bc88000 00000000 ffffffff 00000000 GPR08: 0000000f 00000000 000000ff 00000000 28000422 10121928 10100000 10100000 GPR16: 10100000 00000000 c07c5968 00000000 00000000 00000000 e2c2dc48 e7838000 GPR24: c07c5bac c07c58a8 e77290cc c07b0000 00000000 c05de6c0 e7838000 e2c2dc48 NIP [c058e950] vlan_dev_get_stats64+0x50/0x170 LR [c058ea30] vlan_dev_get_stats64+0x130/0x170 Call Trace: [e2c2dbd0] [ffffffea] 0xffffffea (unreliable) [e2c2dc20] [c047299c] dev_get_stats+0x4c/0x140 [e2c2dc40] [c0488ca8] rtnl_fill_ifinfo+0x3d8/0x960 [e2c2dd70] [c0489f4c] rtmsg_ifinfo+0x6c/0x110 [e2c2dd90] [c04731d4] rollback_registered_many+0x344/0x3b0 [e2c2ddd0] [c047332c] rollback_registered+0x2c/0x50 [e2c2ddf0] [c0476058] unregister_netdevice_queue+0x78/0xf0 [e2c2de00] [c058d800] unregister_vlan_dev+0xc0/0x160 [e2c2de20] [c058e360] vlan_ioctl_handler+0x1c0/0x550 [e2c2de90] [c045d11c] sock_ioctl+0x28c/0x2f0 [e2c2deb0] [c010d070] do_vfs_ioctl+0x90/0x7b0 [e2c2df20] [c010d7d0] SyS_ioctl+0x40/0x80 [e2c2df40] [c000f924] ret_from_syscall+0x0/0x3c Fix this problem by freeing percpu stats from dev->destructor() instead of ndo_uninit() Reported-by:
Madalin-Cristian Bucur <madalin.bucur@freescale.com> Signed-off-by:
-
- 02 Jul, 2014 8 commits
-
-
Daniel Mack authored
Commit 86f6cf41 (net: of_mdio: add of_mdiobus_link_phydev()) introduced a circular dependency between libphy and of_mdio. depmod: ERROR: <modroot>/kernel/drivers/net/phy/libphy.ko in dependency cycle! depmod: ERROR: <modroot>/kernel/drivers/of/of_mdio.ko in dependency cycle! The problem is that of_mdio.c references &mdio_bus_type and libphy now references of_mdiobus_link_phydev. Fix this by not exporting of_mdiobus_link_phydev() from of_mdio.ko. Make it a static function in mdio_bus.c instead. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Jeff Mahoney <jeffm@suse.com> Fixes: 86f6cf41 (net: of_mdio: add of_mdiobus_link_phydev()) Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2014-06-27 Please pull the following batch of fixes for the 3.16 stream... For the mac80211 bits, Johannes says: "We have a fix from Eliad for a time calculation, a fix from Max for head/tailroom when sending authentication packets, a revert that Felix requested since the patch in question broke regulatory and a fix from myself for an issue with a new command that we advertised in the wrong place." For the bluetooth bits, Gustavo says: "A few fixes for 3.16. This pull request contains a NULL dereference fix, and some security/pairing fixes." For the iwlwifi bits, Emmanuel says: "I have here a fix from Eliad for scheduled scan: it fixes a firmware assertion. Arik reverts a patch I made that didn't take into account that 3160 doesn't have UAPSD and hence, we can't assume that all newer firmwares support the feature. Here too, the visible effect is a firmware assertion. Along with that, we have a few fixes and additions to the device list." For the ath10k bits, Kalle says: "Bartosz fixed an issue where we were not able to create 8 vdevs when using DFS. Michal removed a false warning which was just confusing people." On top of that... Arend van Spriel fixes a 'divide by zero' regression in brcmfmac. Amitkumar Karwar corrects a transmit timeout in mwifiex. ==================== Signed-off-by: -
Florian Fainelli authored
Hardware will provide this information as soon as we will start processing incoming packets, so there is no need to set the RX buffer length during buffer allocation. Signed-off-by:
-
Florian Fainelli authored
We use the PHY library which will determine the link state for us, make sure we start with a carrier off until libphy has completed the link training. Signed-off-by:
-
Florian Fainelli authored
As soon as register_netdev() is called, the network device notifiers are running which means that other parts of the kernel, or user-space programs can call the network device ndo_open() callback and use the interface. Disable the Ethernet device clock before we register the network device such that we do not create the following situation: CPU0 CPU1 register_netdev() bcmgenet_open() clk_prepare_enable() clk_disable_unprepare() and leave the hardware block gated off, while we think it should be gated on. Signed-off-by:
-
Florian Fainelli authored
Although we do not limit the number of packets the TX completion function bcm_sysport_tx_reclaim() is allowed to reclaim, we were still using its return value as-is. This means that we could hit the WARN() in net/core/dev.c where work_done >= budget. Make sure we do exit the NAPI context when the TX ring is empty, and pretend there was no work to do. Signed-off-by:
-
Florian Fainelli authored
The UniMAC CMD_SW_RESET bit is not a self-clearing bit, so we need to assert it, wait a bit and clear it manually. As a result, umac_reset() is updated not to return any value. The previous version of the code simply wrote 0 to the CMD register, which would make the busy-waiting loop exit immediately, having zero effect. By writing 0 to the CMD register, we were clearing all bits in the CMD register, and not using the hardware reset default values which are set on purpose. Signed-off-by:
-
Florian Fainelli authored
The SYSTEMPORT Ethernet MAC supports multicast just fine, it just lacks any sort of Unicast/Broadcast/Multicasting filtering at the Ethernet MAC level since that is handled by the front end Ethernet switch, but that is properly handled by bcm_sysport_set_rx_mode(). Some user-space applications might be relying on the presence of this flag to prevent using multicast sockets, this also prevents that interface from joining the IPv6 all-router mcast group. Signed-off-by:
-
- 01 Jul, 2014 2 commits
-
-
Eric Dumazet authored
While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [<ffffffffc01f5928>] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by:
Michel Lespinasse <walken@google.com> Signed-off-by:
-
Eric Dumazet authored
We have two different ways to handle changes to sk->sk_dst First way (used by TCP) assumes socket lock is owned by caller, and use no extra lock : __sk_dst_set() & __sk_dst_reset() Another way (used by UDP) uses sk_dst_lock because socket lock is not always taken. Note that sk_dst_lock is not softirq safe. These ways are not inter changeable for a given socket type. ipv4_sk_update_pmtu(), added in linux-3.8, added a race, as it used the socket lock as synchronization, but users might be UDP sockets. Instead of converting sk_dst_lock to a softirq safe version, use xchg() as we did for sk_rx_dst in commit e47eb5df ("udp: ipv4: do not use sk_dst_lock from softirq context") In a follow up patch, we probably can remove sk_dst_lock, as it is only used in IPv6. Signed-off-by:
-
- 27 Jun, 2014 6 commits
-
-
Denis Kirjanov authored
We have to return the boolean here if the tag presents or not, not just ANDing the TCI with the mask which results to: [ 709.412097] test_bpf: #18 LD_VLAN_TAG_PRESENT [ 709.412245] ret 4096 != 1 [ 709.412332] ret 4096 != 1 [ 709.412333] FAIL (2 times) Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Denis Kirjanov authored
To get a full tag (and not just a VID) we should access the TCI except the VLAN_TAG_PRESENT field (which means that 802.1q header is present). Also ensure that the VLAN_TAG_PRESENT stay on its place Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Hangbin Liu authored
Based on RFC3810 6.2, we also need to check the hop limit and router alert option besides source address. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
James M Leddy authored
Add MIB counters for rcvbuferrors in UDP to help diagnose problems. Signed-off-by:
James M Leddy <james.leddy@redhat.com> Acked-by:
-
Yijing Wang authored
MSI-X should use PCI_MSIX_FLAGS not PCI_MSI_FLAGS. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
- 26 Jun, 2014 7 commits
-
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Small set of misc cifs/smb3 fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] fix mount failure with broken pathnames when smb3 mount with mapchars option cifs: revalidate mapping prior to satisfying read_iter request with cache=loose fs/cifs: fix regression in cifs_create_mf_symlink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon fixes from Guenter Roeck: "Various minor fixes" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Change name used in hwmon_device_register_with_groups hwmon: (emc1403) Fix missing 'select REGMAP_I2C' in Kconfig hwmon: (ntc_thermistor) Use the manufacturer name properly devicetree: bindings: Document murata vendor prefix hwmon: (w83l786ng) Report correct minimum fan speed
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix crash in ipvs tot_stats estimator, from Julian Anastasov. 2) Fix OOPS in nf_nat on netns removal, from Florian Westphal. 3) Really really really fix locking issues in slip and slcan tty write wakeups, from Tyler Hall. 4) Fix checksum offloading in fec driver, from Fugang Duan. 5) Off by one in BPF instruction limit test, from Kees Cook. 6) Need to clear all TSO capability flags when doing software TSO in tg3 driver, from Prashant Sreedharan. 7) Fix memory leak in vlan_reorder_header() error path, from Li RongQing. 8) Fix various bugs in xen-netfront and xen-netback multiqueue support, from David Vrabel and Wei Liu. 9) Fix deadlock in cxgb4 driver, from Li RongQing. 10) Prevent double free of no-cache DST entries, from Eric Dumazet. 11) Bad csum_start handling in skb_segment() leads to crashes when forwarding, from Tom Herbert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: fix setting csum_start in skb_segment() ipv4: fix dst race in sk_dst_get() net: filter: Use kcalloc/kmalloc_array to allocate arrays trivial: net: filter: Change kerneldoc parameter order trivial: net: filter: Fix typo in comment net: allwinner: emac: Add missing free_irq cxgb4: use dev_port to identify ports xen-netback: bookkeep number of active queues in our own module tg3: Change nvram command timeout value to 50ms cxgb4: Not need to hold the adap_rcu_lock lock when read adap_rcu_list be2net: fix qnq mode detection on VFs of: mdio: fixup of_phy_register_fixed_link parsing of new bindings at86rf230: fix irq setup net: phy: at803x: fix coccinelle warnings net/mlx4_core: Fix the error flow when probing with invalid VF configuration tulip: Poll link status more frequently for Comet chips net: huawei_cdc_ncm: increase command buffer size drivers: net: cpsw: fix dual EMAC stall when connected to same switch xen-netfront: recreate queues correctly when reconnecting xen-netfront: fix oops when disconnected from backend ... -
Tom Herbert authored
Dave Jones reported that a crash is occurring in csum_partial tcp_gso_segment inet_gso_segment ? update_dl_migration skb_mac_gso_segment __skb_gso_segment dev_hard_start_xmit sch_direct_xmit __dev_queue_xmit ? dev_hard_start_xmit dev_queue_xmit ip_finish_output ? ip_output ip_output ip_forward_finish ip_forward ip_rcv_finish ip_rcv __netif_receive_skb_core ? __netif_receive_skb_core ? trace_hardirqs_on __netif_receive_skb netif_receive_skb_internal napi_gro_complete ? napi_gro_complete dev_gro_receive ? dev_gro_receive napi_gro_receive It looks like a likely culprit is that SKB_GSO_CB()->csum_start is not set correctly when doing non-scatter gather. We are using offset as opposed to doffset. Reported-by:
Dave Jones <davej@redhat.com> Tested-by:
Tom Herbert <therbert@google.com> Signed-off-by:
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Trond Myklebust: "Highlights include: - Stable fix for a data corruption case due to incorrect cache validation - Fix a couple of false positive cache invalidations - Fix NFSv4 security negotiation issues" * tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for support NFS Return -EPERM if no supported or matching SECINFO flavor NFS check the return of nfs4_negotiate_security in nfs4_submount NFS: Don't mark the data cache as invalid if it has been flushed NFS: Clear NFS_INO_REVAL_PAGECACHE when we update the file size nfs: Fix cache_validity check in nfs_write_pageuptodate() -
Eric Dumazet authored
When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by:
Dormando <dormando@rydia.net> Signed-off-by:
-
- 25 Jun, 2014 6 commits
-
-
Tobias Klauser authored
Use kcalloc/kmalloc_array to make it clear we're allocating arrays. No integer overflow can actually happen here, since len/flen is guaranteed to be less than BPF_MAXINSNS (4096). However, this changed makes sure we're not going to get one if BPF_MAXINSNS were ever increased. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Tobias Klauser authored
Change the order of the parameters to sk_unattached_filter_create() in the kerneldoc to reflect the order they appear in the actual function. This fix is only cosmetic, in the generated doc they still appear in the correct order without the fix. Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
-
Maxime Ripard authored
If the mdio probe function fails in emac_open, the interrupt we just requested isn't freed. If emac_open is called again, for example because we try to set up the interface again, the kernel will oops because the interrupt wasn't properly released. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Commit 3f85944f ("net: Add sysfs file for port number") introduce dev_port to network devices. cxgb4 adapters have multiple ports on the same PCI function, and used dev_id to identify those ports. That use was removed by commit 8c367fcb ("cxgb4: Do not set net_device::dev_id to VI index"), since dev_id should be used only when devices share the same MAC address. Using dev_port for cxgb4 allows different ports on the same PCI function to be identified. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
-
Wei Liu authored
The original code uses netdev->real_num_tx_queues to bookkeep number of queues and invokes netif_set_real_num_tx_queues to set the number of queues. However, netif_set_real_num_tx_queues doesn't allow real_num_tx_queues to be smaller than 1, which means setting the number to 0 will not work and real_num_tx_queues is untouched. This is bogus when xenvif_free is invoked before any number of queues is allocated. That function needs to iterate through all queues to free resources. Using the wrong number of queues results in NULL pointer dereference. So we bookkeep the number of queues in xen-netback to solve this problem. This fixes a regression introduced by multiqueue patchset in 3.16-rc1. There's another bug in original code that the real number of RX queues is never set. In current Xen multiqueue design, the number of TX queues and RX queues are in fact the same. We need to set the numbers of TX and RX queues to the same value. Also remove xenvif_select_queue and leave queue selection to core driver, as suggested by David Miller. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Wei Liu <wei.liu2@citrix.com> CC: Ian Campbell <ian.campbell@citrix.com> CC: Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
