- 16 May, 2008 8 commits
-
-
Scott Wood authored
This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep mode, and return after an interrupt has occurred. It expects to be called with interrupts disabled, and returns with interrupts disabled. Interrupts are enabled while the processor is asleep, but the interrupt that wakes the processor is not handled; it is still pending when this function returns. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This provides a way to defer processing of an interrupt that wakes the processor out of sleep mode. On 32-bit platforms that use an interrupt to wake the processor, we have to have interrupts enabled in hardware at the point where we go to sleep, otherwise the processor will never wake up. However, because interrupts are logically disabled at this point, we don't want to process the interrupt straight away. This is handled by setting the _TLF_SLEEPING flag. When we get an interrupt and _TLF_SLEEPING is set, we firstly clear the MSR_EE (external interrupt enable) bit in the saved MSR value, and secondly we then return to the address in the link register, like we do for _TLF_NAPPING, but without actually handling the interrupt. Note that this is handled somewhat differently on powerbooks, so this new code will only be used on non-Apple machines. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] macintosh: Replace deprecated __initcall with device_initcall [POWERPC] cell: Fix section mismatches in io-workarounds code [POWERPC] spufs: Fix compile error [POWERPC] Fix uninitialized variable bug in copy_{to|from}_user [POWERPC] Add null pointer check to of_find_property [POWERPC] vmemmap fixes to use smaller pages [POWERPC] spufs: Fix pointer reference in find_victim [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board. [POWERPC] 86xx: mpc8610_hpcd: fix second serial port [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes [POWERPC] 85xx: Add 8568 PHY workarounds to board code [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: update transaction t_state to T_COMMIT fix ext4: Retry block allocation if new blocks are allocated from system zone. ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystems ext4: fix typos in messages and comments (journalled -> journaled) ext4: fix synchronization of quota files in journal=data mode ext4: Fix mount messages when quota disabled ext4: correct mount option parsing to detect when quota options can be changed
-
Cyrill Gorcunov authored
This patch fixes a build bug on m68k - gcc decides to emit a call to the strlen library function, which we don't implement. More importantly - my previous patch "init: don't lose initcall return values" (commit e662e1cf) had introduced potential buffer overflow by wrong calculation of string accumulator size. Use strlcat() instead, fixing both bugs. Many thanks Andreas Schwab and Geert Uytterhoeven for helping to catch and fix the bug. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
One function to just loop over the entries, one function to actually do the call and the associated debugging code. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 15 May, 2008 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix personality(PER_LINUX32) performance issue [IA64] Properly unregister legacy interrupts [IA64] Remove NULL pointer check for argument never passed as NULL. [IA64] trivial cleanup for perfmon.c [IA64] trivial cleanup for entry.S [IA64] fix interrupt masking for pending works on kernel leave [IA64] allow user to force_pal_cache_flush [IA64] Don't reserve crashkernel memory > 4 GB [IA64] machvec support for SGI UV platform [IA64] Add header files for SGI UV platform
-
Mingming Cao authored
Updating the current transaction's t_state is protected by j_state_lock. We need to do the same when updating the t_state to T_COMMIT. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-
Aneesh Kumar K.V authored
If the block allocator gets blocks out of system zone ext4 calls ext4_error. But if the file system is mounted with errors=continue retry block allocation. We need to mark the system zone blocks as in use to make sure retry don't pick them again System zone is the block range mapping block bitmap, inode bitmap and inode table. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
-
Ingo Molnar authored
Enabling the BKL to be lockdep tracked uncovered the following upstream kernel bug in the tty code, which caused a BKL reference leak: ================================================ [ BUG: lock held when returning to user space! ] ------------------------------------------------ dmesg/3121 is leaving the kernel with locks still held! 1 lock held by dmesg/3121: #0: (kernel_mutex){--..}, at: [<c02f34d9>] opost+0x24/0x194 this might explain some of the atomicity warnings and crashes that -tip tree testing has been experiencing since the BKL was converted back to a spinlock. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Huang, Xiaolan authored
The patch aims to fix a performance issue for the syscall personality(PER_LINUX32). On IA-64 box, the syscall personality (PER_LINUX32) has poor performance because it failed to find the Linux/x86 execution domain. Then it tried to load the kernel module however it failed always and it used the default execution domain PER_LINUX instead. Requesting kernel modules is very expensive. It caused the performance issue. (see the function lookup_exec_domain in kernel/exec_domain.c). To resolve the issue, execution domain Linux/x86 is always registered in initialization time for IA-64 architecture. Signed-off-by: Xiaolan Huang <xiaolan.huang@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] show_interrupts: prevent cpu hotplug when walking cpu_online_map. [S390] smp: __smp_call_function_map vs cpu_online_map fix. [S390] tape: Use ccw_dev_id to build cdev_id. [S390] dasd: fix timeout handling in interrupt handler [S390] s390dbf: Use const char * for dbf name. [S390] dasd: Use const in busid functions. [S390] blacklist.c: removed duplicated include [S390] vmlogrdr: module initialization function should return negative errors [S390] sparsemem vmemmap: initialize memmap. [S390] Remove last traces of cio_msg=. [S390] cio: Remove CCW_CMD_SUSPEND_RECONN in front of CCW_CMD_SET_PGID.
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: arch/parisc/kernel/perf_asm.S: build fix parisc: remove -traditional from assembler flags parisc: use conditional macro for 64-bit wide ops parisc: Remove ioctl.h content picked up from <asm-generic/ioctl.h>. arch/parisc/kernel/unaligned.c: use time_* macros parisc: remove redundant display of free swap space in show_mem() drivers/parisc: replace remaining __FUNCTION__ occurrences parisc: replace remaining __FUNCTION__ occurrences parisc: new termios definitions parisc: fix trivial section name warnings
-
Kyle McMartin authored
Missing <linux/init.h> header for __HEAD macro. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Kyle McMartin authored
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Kyle McMartin authored
This work enables us to remove -traditional from $AFLAGS on parisc. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Robert P. J. Day authored
Now that <asm-generic/ioctl.h> allows overriding of the most commonly changed macro values, take advantage of that. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Heiko Carstens authored
Surround all the code withing show_interrupts() with get/put_online_cpus() to prevent strange results wrt cpu hotplug. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Both smp_call_function() and __smp_call_function_map() access cpu_online_map. Both functions run with preemption disabled which protects for cpus going offline. However new cpus can be added and therefore the cpu_online_map can change unexpectedly. So use the call_lock to protect against changes to the cpu_online_map in start_secondary() and all smp_call_* functions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
To construct the integer containing the information from the bus_id, it is easier to use the data from ccw_dev_id than to parse the bus_id. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Stefan Weinhuber authored
When the dasd_int_handler is called with an error code instead of an irb, the associated request should be restarted. This handling was missing from the -ETIMEDOUT case. In fact it should be done in any case. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
We should use const char * for passing the name of the debug feature around since it will not be changed. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
We should use 'const char *' in the busid functions since the strings are not modified anyway. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Huang Weiyi authored
Removed duplicated include <asm/cio.h> in drivers/s390/cio/blacklist.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Marcin Slusarz authored
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Let's just use the generic vmmemmap_alloc_block() function which always returns initialized memory. Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
cio_msg= is gone, also remove it from kernel-parameters.txt. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Michael Ernst authored
CCW_CMD_SUSPEND_RECONN causes a system hang if the cable of a reserved DASD is disconnected and connected again. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
S.Caglar Onur authored
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So use the time_after() macro, defined in linux/jiffies.h, which deals with wrapping correctl [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: S.Caglar Onur <caglar@pardus.org.tr> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Johannes Weiner authored
show_mem() has no need to print the amount of free swap space manually because show_free_areas() does this already and is called by the former. The two outputs only differ in text formatting: printk("Free swap = %lukB\n", ...); printk("Free swap: %6ldkB\n", ...); Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Helge Deller authored
This trivial patch fixes the following section warnings on PARISC: > WARNING: vmlinux.o (.text.1): unexpected section name. >The (.[number]+) following section name are ld generated and not expected. > Did you forget to use "ax"/"aw" in a .S file? > Note that for example <linux/init.h> contains > section definitions for use in .S files. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Ishizaki Kou authored
Fix following warnings: WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0x9c): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.iowa_register_bus() WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0xa4): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.io_workaround_init() Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
FUJITA Tomonori authored
With CONFIG_VIRT_CPU_ACCOUNTING disabled, I got the following error: linux-2.6/arch/powerpc/platforms/cell/spufs/file.c: In function 'spu_switch_log_notify': linux-2.6/arch/powerpc/platforms/cell/spufs/file.c:2542: error: implicit declaration of function 'get_tb' make[4]: *** [arch/powerpc/platforms/cell/spufs/file.o] Error 1 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Nate Case authored
Calls to copy_to_user() or copy_from_user() can fail when copying N bytes, where N is a constant less than 8, but not 1, 2, 4, or 8, because 'ret' is not initialized and is only set if the size is 1, 2, 4 or 8, but is tested after the switch statement for any constant size <= 8. This fixes it by initializing 'ret' to 1, causing the code to fall through to the __copy_tofrom_user call for sizes other than 1, 2, 4 or 8. Signed-off-by: Dave Scidmore <dscidmore@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-