- 25 Nov, 2019 40 commits
-
-
Christian Lamparter authored
[ Upstream commit bd73a3dd ] while compiling an ipq4019 target, dtc will complain: regulator@b089000 unit address format error, expected "2089000" The saw0 regulator reg value seems to be copied and pasted from qcom-ipq8064.dtsi. This patch fixes the reg value to match that of the unit address which in turn silences the warning. (There is no driver for qcom,saw2 right now. So this went unnoticed) Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Cong Wang authored
[ Upstream commit 9708d2b5 ] llc_sap_close() is called by llc_sap_put() which could be called in BH context in llc_rcv(). We can't block in BH. There is no reason to block it here, kfree_rcu() should be sufficient. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit b97760ae ] Smatch complains about this condition: if (has_config && num_pins >= 1) The "has_config" variable is either uninitialized or true. The "num_pins" variable is unsigned and we verified that it is non-zero on the lines before so we know "num_pines >= 1" is true. Really, we could just check "num_configs" directly and remove the "has_config" variable. Fixes: 77618084 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 7064f376 ] The interrupt handler has to be acquired after the other resource initialization when allocated with IRQF_SHARED. Otherwise it's triggered before the resource gets ready, and may lead to unpleasant behavior. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1ccbeeb8 ] The VIDEO_GET_EVENT and VIDEO_STILLPICTURE was added back in 2005 but it never worked because the command number is wrong. Using the right command number means we have a better chance of them actually doing the right thing, though clearly nobody has ever tried it successfully. I noticed these while auditing the remaining users of compat_time_t for y2038 bugs. This one is fine in that regard, it just never did anything. Fixes: 6e87abd0 ("[DVB]: Add compat ioctl handling.") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Lao Wei authored
[ Upstream commit eac7230f ] Motion eye video4linux driver for Sony Vaio PictureBook desn't validate user-controlled parameter 'vma->vm_pgoff', a malicious process might access all of kernel memory from user space by trying pass different arbitrary address. Discussion: http://www.openwall.com/lists/oss-security/2018/07/06/1Signed-off-by:
Lao Wei <zrlw@qq.com> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit ca6ac25c ] nvmem_device_get() should return ERR_PTR() on error or valid pointer on success, but one of the code path seems to return NULL, so fix it. Reported-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit cbdd96f5 ] Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe list, just remove it from the list and keep it on kprobe hash list as same as other in-use kprobes. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Deepak Ukey authored
[ Upstream commit 72349b62 ] When the firmware is not responding, execution of kexec boot causes a system hang. When firmware assertion happened, driver get notified with interrupt vector updated in MPI configuration table. Then, the driver will read scratchpad register and set controller_fatal_error flag to true. Signed-off-by:
Deepak Ukey <deepak.ukey@microchip.com> Signed-off-by:
Viswas G <Viswas.G@microchip.com> Acked-by:
Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Deepak Ukey authored
[ Upstream commit 76cb25b0 ] For the function dma_unmap_sg(), the <nents> parameter should be number of elements in the scatter list prior to the mapping, not after the mapping. Signed-off-by:
-
Oleksij Rempel authored
[ Upstream commit 8148d213 ] One of the Freescale recommended sequences for power off with external PMIC is the following: ... 3. SoC is programming PMIC for power off when standby is asserted. 4. In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies. See: http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf page 5083 This patch implements step 4. of this sequence. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
George Kennedy authored
[ Upstream commit 288315e9 ] sym_int_sir() in sym_hipd.c does not check the command pointer for NULL before using it in debug message prints. Suggested-by:
Matthew Wilcox <matthew.wilcox@oracle.com> Signed-off-by:
George Kennedy <george.kennedy@oracle.com> Reviewed-by:
Mark Kanda <mark.kanda@oracle.com> Acked-by:
-
Chao Yu authored
[ Upstream commit 4a70e255 ] In fill_super -> init_percpu_info, we should destroy percpu counter in error path, otherwise memory allcoated for percpu counter will leak. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 4a63c1ff ] For userspace to tell the difference between an random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGSEGV is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGSEGV, SEND_SIG_FORCE, current) with force_sig(SIG_SEGV, current) which gets this right and is shorter and easier to type. Fixes: 791eca10 ("uretprobes/x86: Hijack return address") Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 55a3235f ] For userspace to tell the difference between a random signal and an exception, the exception must include siginfo information. Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result in userspace seeing si_code == SI_USER (like a random signal) instead of si_code == SI_KERNEL or a more specific si_code as all exceptions deliver. Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current) with force_sig(SIG_ILL, current) which gets this right and is shorter and easier to type. Fixes: 014940ba ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails") Fixes: 0b5256c7 ("uprobes: Send SIGILL if handle_trampoline() fails") Reviewed-by:
-
Eric W. Biederman authored
[ Upstream commit 86989c41 ] If the first process started (aka /sbin/init) receives a SIGKILL it will panic the system if it is delivered. Making the system unusable and undebugable. It isn't much better if the first process started receives SIGSTOP. So always ignore SIGSTOP and SIGKILL sent to init. This is done in a separate clause in sig_task_ignored as force_sig_info can clear SIG_UNKILLABLE and this protection should work even then. Reviewed-by:
-
Felix Fietkau authored
[ Upstream commit 6df0580b ] Various documented examples on how to set up tx99 with ath9k rely on setting up a regular monitor interface for setting the channel. My previous patch "ath9k: fix tx99 with monitor mode interface" made it possible to set it up this way again. However, it was removing support for using an active monitor interface, which is required for controlling the bitrate as well, since the bitrate is not passed down with a regular monitor interface. This patch partially reverts the previous one, but keeps support for using a regular monitor interface to keep documented steps working in cases where the bitrate does not matter Fixes: d9c52fd1 ("ath9k: fix tx99 with monitor mode interface") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Daniel Silsby authored
[ Upstream commit 83ef4fb7 ] Func jz4780_dma_desc_residue() expects the index to the next hw descriptor as its last parameter. Caller func jz4780_dma_tx_status(), however, applied modulus before passing it. When the current hw descriptor was last in the list, the index passed became zero. The resulting excess of reported residue especially caused problems with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which rely on this for determining current DMA location within buffer. Combined with the recent and related residue-reporting fixes, spurious ALSA audio underruns on jz4770 hardware are now fixed. Signed-off-by:
Daniel Silsby <dansilsby@gmail.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Tested-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit c558ecd2 ] If we make this driver depend on MACH_JZ4780, that means it can be enabled only if we're building a kernel specially crafted for a JZ4780-based board, while most GNU/Linux distributions will want one generic MIPS kernel that works on multiple boards. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 1ae00833 ] This is needed to make the display and venc work properly. Compare to omap3-beagle.dts. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit fa99c21e ] Vendor defined U-Boot has changed the partition scheme a while ago: * kernel partition 6MB * file system partition uses the remainder up to end of the NAND * increased size of the environment partition (to get an OneNAND compatible base address) * shrink the U-Boot partition Let's be compatible (e.g. Debian kernel built from upstream). Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 7384a242 ] we fix penirq polarity, add penirq pinmux and touchscreen properties. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 8905592b ] The omap dss susbystem takes the display aliases to find out which displays exist. To enable tv-out we must define an alias. Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit f6591391 ] * fix connector compatibility (composite) * add comment for gpio1 23 * add proper #address-cells * we use only one venc_out channel for composite Signed-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit fa0d7dc3 ] needed for device variants based on GTA04 board but with different display panel (driver). Signed-off-by:
-
Rob Herring authored
[ Upstream commit f6707fd6 ] Cache nodes under the cpu node(s) is PowerMac specific according to the comment above, so make the code enforce that. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yong Zhi authored
[ Upstream commit 3b857472 ] Playback of 44.1Khz contents with HDMI plugged returns "Invalid pipe config" because HDMI paths in the FW topology are configured to operate at 48Khz. This patch filters out sampling rates not supported at hdac_hdmi_create_dais() to let user space SRC to do the converting. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Ding Xiang authored
[ Upstream commit c6e1241a ] if device_register return error, iounmap should be called, also iounmap need to call before put_device. Signed-off-by:
Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20476/ Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Erik Stromdahl authored
[ Upstream commit 37f62c0d ] This is done in order not to trig the below warning in ieee80211_rx_napi: WARN_ON_ONCE(softirq_count() == 0); ieee80211_rx_napi requires that softirq's are disabled during execution. The High latency bus drivers (SDIO and USB) sometimes call the wmi ep_rx_complete callback from non softirq context, resulting in a trigger of the above warning. Calling ieee80211_rx_ni with softirq's already disabled (e.g., from softirq context) should be safe as the local_bh_disable and local_bh_enable functions (called from ieee80211_rx_ni) are fully reentrant. Signed-off-by:
Erik Stromdahl <erik.stromdahl@gmail.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit ef2ecab9 ] S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has external pull-up resistors, so disable any pull control for it in in controller node. This fixes support for S5M8767 interrupts and enables operation of wakeup from S5M8767 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 9ab708ae ] In the case where lo_vag <= SGTL5000_LINE_OUT_GND_BASE, lo_vag is set to zero and later vol_quot is computed by dividing by lo_vag causing a division by zero error. Fix this by avoiding a zero division and set vol_quot to zero in this specific case so that the lowest setting for i is correctly set. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit fa8cd98c ] We need to bail out if lan78xx_get_endpoints() fails, otherwise the result is overwritten. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Raghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com> Signed-off-by:
-
Larry Finger authored
[ Upstream commit 199ba9fa ] In gcc8, when the 3rd argument (size) of a call to strncpy() matches the length of the first argument, the compiler warns of the possibility of an unterminated string. Using strlcpy() forces a null at the end. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Marcel Ziswiler authored
[ Upstream commit 8a1ecc01 ] There is one too many zeroes in the Power I2C base address. Fix this. Signed-off-by:
Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Sara Sharon authored
[ Upstream commit 1a19c139 ] When we receive TX response, we may release a few packets due to a hole that was closed in the transmission window. However, if that frame failed, we will mark all the released frames as failed and will send multiple BARs. This affects statistics badly, and cause unnecessary frames transmission. Instead, mark all the following packets as success, with the desired result of sending a bar for the failed frame only. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Vijay Immanuel authored
[ Upstream commit 030e46e4 ] When a read request is retried for the remaining partial data, the response may restart from read response first or read response only. So support those cases. Do not advance the comp psn beyond the current wqe's last_psn as that could skip over an entire read wqe and will cause the req_retry() logic to set an incorrect req psn. An example sequence is as follows: Write PSN 40 -- this is the current WQE. Read request PSN 41 Write PSN 42 Receive ACK PSN 42 -- this will complete the current WQE for PSN 40, and set the comp psn to 42 which is a problem because the read request at PSN 41 has been skipped over. So when req_retry() tries to retransmit the read request, it sets the req psn to 42 which is incorrect. When retrying a read request, calculate the number of psns completed based on the dma resid instead of the wqe first_psn. The wqe first_psn could have moved if the read request was retried multiple times. Set the reth length to the dma resid to handle read retries for the remaining partial data. Signed-off-by:
Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Patryk Małek authored
[ Upstream commit 5907cf6c ] To prevent VF from deleting MAC address that was assigned by the PF we need to check for that scenario when we try to delete a MAC address from a VF. Signed-off-by:
Patryk Małek <patryk.malek@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Patryk Małek authored
[ Upstream commit 5cba17b1 ] Hold the rtnl lock when we're clearing interrupt scheme in i40e_shutdown and in i40e_remove. Signed-off-by:
-
Mitch Williams authored
[ Upstream commit 7eb74ff8 ] Caught by GCC 8. When we provide a length for strncpy, we should not include the terminating null. So we must tell it one less than the size of the destination buffer. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Marek Szyprowski authored
[ Upstream commit f8f3b7fc ] Regulators, which are marked as 'on-in-suspend' seems to be critical for board operation, thus they must not be disabled anytime. This can be only assured by marking them as 'always-on', because otherwise some actions of their clients might result in turning them off. This patch restores suspend/resume operation on Peach-Pit Chromebook board. It partially reverts 'always-on' property removal done by the commit mentioned in the Fixes tag. Fixes: 665c441e ("ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards") Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
