- 10 Jan, 2011 3 commits
-
-
Mark Brown authored
Currently the x86 platform devices are not consistent about selecting or depending on the LEDs Kconfig variables, and this inconsistency leads to Kconfig getting upset and refusing to offer LEDs (even on non-x86 platforms): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI Fix this by always selecting rather than depending on the symbols as slightly more drivers use this approach already and it seems more user friendly. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Randy Dunlap authored
Fix sparse warning for non-ANSI function declaration: drivers/platform/x86/sony-laptop.c:1134:35: warning: non-ANSI function declaration of function 'sony_nc_rfkill_update' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg@redhat.com> Cc: Mattia Dongili <malattia@linux.it> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Randy Dunlap authored
Fix sparse warning for non-ANSI function declaration: drivers/platform/x86/intel_ips.c:1477:25: warning: non-ANSI function declaration of function 'ips_link_to_i915_driver' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
- 07 Jan, 2011 37 commits
-
-
Albert Astals Cid authored
Add the KHLB2 model identifier to the list of supported models Signed-off-by:
Albert Astals Cid <aacid@kde.org> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
From: Lee, Chun-Yi authored
Enabled Acer Launch Manager mode to disable the EC raw behavior for communication devices when WMID3 method available. And, we also add a ec_raw_mode kernel module option for enable The EC raw behavior mode when anyone what reset it back. When Acer Launch Manager mode enabled, EC will stop to touch any communication devices' RF state or power state that causes conflict with rfkill_input or any userland daemon to charge the rfkill rules. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Acked-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Jiri Benc <jbenc@suse.cz> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Feng Tang authored
Latest kernel has many changes in IRQ subsystem and its interfaces, like adding "irq_eoi" for struct irq_chip, this patch will make it support both the new and old interface. Cc: Alek Du <alek.du@intel.com> Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Jesper Juhl authored
ACPI Thinkpad: We must always call va_end() after va_start() but do not do so in thinkpad_acpi.c::acpi_evalf() Hi, In drivers/platform/x86/thinkpad_acpi.c::acpi_evalf() we don't always call va_end() after va_start(). This patch corrects that. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
Initial wlan/bluetooth/wwan rfkill software block state when acer-wmi driver probe. Acer notebook can save the devices state and this patch can use it to initial the devices' rfkill state. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Acked-by:
Thomas Renninger <trenn@suse.de> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
Check the Acer OEM-specific Type AA to detect the WiFi/Bluetooth/3G devices available or not, and set the devices capability flag. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
Dmitry Torokhov <dtor@mail.ru> Acked-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Jiri Benc <jbenc@suse.cz> Cc: Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
Add 3G rfkill sysfs file for provide userland to control 3G device on/off by using WMI method. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Acked-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Jiri Benc <jbenc@suse.cz> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
Carlos Corbaho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
Add acer wmi hotkey event support. Install a wmi notify handler to transfer wmi event key to key code, then send out keycode through acer wmi input device to userland. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Acked-by:
Thomas Renninger <trenn@suse.de> Acked-by:
Jiri Benc <jbenc@suse.cz> Signed-off-by:
Carlos Corbacho <carlos@strangeworlds.co.uk> Cc: Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Sedat Dilek authored
With 'make oldnoconfig' I see these warnings in linux-next (next-20101208): drivers/platform/x86/Kconfig:422:error: recursive dependency detected! drivers/platform/x86/Kconfig:422: symbol EEEPC_WMI depends on ACPI_WMI drivers/platform/x86/Kconfig:438: symbol ACPI_WMI is selected by ACER_WMI drivers/platform/x86/Kconfig:18: symbol ACER_WMI depends on LEDS_CLASS drivers/leds/Kconfig:10: symbol LEDS_CLASS is selected by EEEPC_WMI This patch replaces all "select on ACPI_WMI" by "depends on ACPI_WMI". Quote from David Woodhouse: "A better policy is: "NEVER USE SELECT"." Reported-and-tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Sedat Dilek <sedat.dilek@gmail.com> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
Passing ideapad_priv as argument and try not to using too much global variable. This is part 2 for rfkill. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
Passing ideapad_priv as argument and try not to using too much global variable. This is part 1 for platform driver and input device. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
1. Add markups on init and exit functions 2. Unify the comments in the same style 3. Return result when module initial Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
Hotkey enabled by this patch: Fn+F3: Video mode switch Fn+F5: software rfkill for wifi For some ideapad when push Fn+F3, hardware generates Super-P keys, those key will not be enabled by this patch. Thanks for Dave Hansen report the problem. If CONFIG_INPUT_SPARSEKMAP is not set, when building, you will have error message: ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined! ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined! To select INPUT_SPARSEKMAP solve this issue. Ref: http://lkml.org/lkml/2010/12/2/340Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
The entry was at /sys/devices/LNXSYSTM:00/../VPC2004:00/camera_power move to /sys/devices/platform/ideapad/camera_power Add document about usage of ideapad node in sysfs. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Ike Panhc authored
Create /sys/devices/platform/ideapad for nodes of ideapad landing. Signed-off-by:
Ike Panhc <ike.pan@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Namhyung Kim authored
Annotate pnp_ids as '__used' to fix following warning: CC drivers/platform/x86/fujitsu-laptop.o drivers/platform/x86/fujitsu-laptop.c:1243: warning: ‘pnp_ids’ defined but not used Signed-off-by:
Namhyung Kim <namhyung@gmail.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Dan Carpenter authored
The break resets the retval to 0 but we want to return an error code. This was introduced in c64eefd4 "WMI: embed struct device directly into wmi_block" Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru>
-
Corentin Chary authored
If legacy device (SB.ATKD - ASUS010) used by eeepc-laptop is enabled, don't allow eeepc-wmi to load because: - eeepc-laptop may be loaded, and can conflict with eeepc-wmi (they both try to register eeepc::touchpad led for example). - the WMI interface is inteded to be used when the OS is not detected as Win 7. And when this is the case, the ASUS010 device is disabled. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Allow te get the current led state in a more accurate way. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Since eeepc-wmi has currently no official maintainer, I claim maintainership of this driver, and add it to the acpi4asus project. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
eeepc-wmi/ - debugfs root directory dev_id - current dev_id ctrl_param - current ctrl_param devs - call DEVS(dev_id, ctrl_param) and print result dsts - call DSTS(dev_id) and print result DEVS and DSTS are the main functions used in eeepc-wmi, this will allow to test new features without patching the drivers. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
wimax support is missing because I don't have any DSDT with WMI and wimax support. Most of the code comes from eeepc-laptop. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Most of the code comes from eeepc-laptop. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
The old code was using platform_driver.probe to initialize eeepc_wmi context. That's a mistake because if probe fail, eeepc_platform_register() won't tell anyone, and chaos will happen. Wrap add and remove code inside eeepc_wmi_add() / eeepc_wmi_remove(), and try to use the static platform_device only in eeepc_wmi_init() and eeepc_wmi_exit() The code is now very similar to eeepc-laptop, except eeepc_laptop_add and eeepc_laptop_remove are called from acpi_driver, not module init/exit functions, but WMI doesn't provide such functionalities (yet ?). Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Herton Ronaldo Krzesinski authored
Add missing input_sync call in cmpc_keys_handler function. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
-
Herton Ronaldo Krzesinski authored
We don't need to call bios/acpi (cmpc_set_rfkill_wlan) if the blocked state is already set to the same value (little optimization). This can happen for example if we initialize the module with same initial hardware state (rfkill core always call cmpc_rfkill_block on initialization here). Also GWRI method only accepts 0 or 1 for setting rfkill block, as can be seen on AML code from acpidump->DSDT from a classmate sample I have, so should be fine setting state only to 0 or 1 directly. Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
Matthew Garrett <mjg@redhat.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
-
Colin King authored
WMI data blocks can contain WMI events with the same GUID but with different notifiy_ids, for example volume up/down hotkeys. This patch enables a single event handler to be registered and unregistered against all events with same GUID but different notify_ids. Since an event handler is passed the notify_id of an event it can can differentiate between the different events. The patch also ensures we only register and unregister a device per unique GUID. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Sreedhara DS authored
This driver implements ioctl and interfaces with intel scu ipc driver. It is used to access pmic/msic registers from user space and firmware update utility. Signed-off-by:
Sreedhara DS <sreedhara.ds@intel.com> [Extensive clean up and debug] Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits) USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) USB: serial: ftdi_sio: add support for TIOCSERGETLSR USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport USB: atmel_usba_udc: fix freeing irq in usba_udc_remove() usb: ehci-omap: fix tll channel enable mask usb: ohci-omap3: fix trivial typo USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096 USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's USB: gadget: update ci13xxx to work with g_ether USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers Revert "USB: musb: pm: don't rely fully on clock support" Revert "USB: musb: blackfin: pm: make it work" USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path USB: uas: Ensure we only bind to a UAS interface USB: uas: Rename sense pipe and sense urb to status pipe and status urb USB: uas: Use kzalloc instead of kmalloc USB: uas: Fix up the Sense IU usb: musb: core: kill unneeded #include's DA8xx: assign name to MUSB IRQ resource usb: gadget: g_ncm added ... Manually fix up trivial conflicts in USB Kconfig changes in: arch/arm/mach-omap2/Kconfig arch/sh/Kconfig drivers/usb/Kconfig drivers/usb/host/ehci-hcd.c and annoying chip clock data conflicts in: arch/arm/mach-omap2/clock3xxx_data.c arch/arm/mach-omap2/clock44xx_data.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (147 commits) [SCSI] arcmsr: fix write to device check [SCSI] lpfc: lower stack use in lpfc_fc_frame_check [SCSI] eliminate an unnecessary local variable from scsi_remove_target() [SCSI] libiscsi: use bh locking instead of irq with session lock [SCSI] libiscsi: do not take host lock in queuecommand [SCSI] be2iscsi: fix null ptr when accessing task hdr [SCSI] be2iscsi: fix gfp use in alloc_pdu [SCSI] libiscsi: add more informative failure message during iscsi scsi eh [SCSI] gdth: Add missing call to gdth_ioctl_free [SCSI] bfa: remove unused defintions and misc cleanups [SCSI] bfa: remove inactive functions [SCSI] bfa: replace bfa_assert with WARN_ON [SCSI] qla2xxx: Use sg_next to fetch next sg element while walking sg list. [SCSI] qla2xxx: Fix to avoid recursive lock failure during BSG timeout. [SCSI] qla2xxx: Remove code to not reset ISP82xx on failure. [SCSI] qla2xxx: Display mailbox register 4 during 8012 AEN for ISP82XX parts. [SCSI] qla2xxx: Don't perform a BIG_HAMMER if Get-ID (0x20) mailbox command fails on CNAs. [SCSI] qla2xxx: Remove redundant module parameter permission bits [SCSI] qla2xxx: Add sysfs node for displaying board temperature. [SCSI] qla2xxx: Code cleanup to remove unwanted comments and code. ...
-
Dan Carpenter authored
There was a semi-colon missing and it broke the compile. Signed-off-by:
Dan Carpenter <error27@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin * 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin: (57 commits) fs: scale mntget/mntput fs: rename vfsmount counter helpers fs: implement faster dentry memcmp fs: prefetch inode data in dcache lookup fs: improve scalability of pseudo filesystems fs: dcache per-inode inode alias locking fs: dcache per-bucket dcache hash locking bit_spinlock: add required includes kernel: add bl_list xfs: provide simple rcu-walk ACL implementation btrfs: provide simple rcu-walk ACL implementation ext2,3,4: provide simple rcu-walk ACL implementation fs: provide simple rcu-walk generic_check_acl implementation fs: provide rcu-walk aware permission i_ops fs: rcu-walk aware d_revalidate method fs: cache optimise dentry and inode for rcu-walk fs: dcache reduce branches in lookup path fs: dcache remove d_mounted fs: fs_struct use seqlock fs: rcu-walk for path lookup ...
-
Nick Piggin authored
The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by:
Nick Piggin <npiggin@kernel.dk>
-