Skip to content

L
linux
Switch branch/tag
  1. 08 Sep, 2012 2 commits
    • Jiri Olsa's avatar
      perf tools: Replace sort's standalone field_sep with symbol_conf.field_sep · 0ca0c130
      Jiri Olsa authored 
      The repsep_snprintf function was still using standalone field_sep, which
not even set anymore.

Replacing it with 'symbol_conf.field_sep'.
Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1346946426-13496-3-git-send-email-jolsa@redhat.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      0ca0c130
    • Jiri Olsa's avatar
      perf diff: Make diff command work with evsel hists · 863e451f
      Jiri Olsa authored 
      Putting 'perf diff' command back on track with the 'latest'
evsel hists changes. Each evsel has its own 'hists' object
gathering stats for the particular event.

While currently counts are accumulated for the whole session
regardless of the events diversification within compared
sessions.

The 'perf diff' command now outputs all matching events within
compared sessions (with event name specified). The per event
diff output stays the same.

  $ ./perf diff
  # Event 'cycles'
  #
  # Baseline  Delta          Shared Object                          Symbol
  # ........ ..........  .................  ..............................
  #
       0.00%    +15.14%  [kernel.kallsyms]  [k] __wake_up
       0.00%    +13.38%  [kernel.kallsyms]  [k] ext4fs_dirhash

... SNIP

       0.00%     +0.42%  [kernel.kallsyms]  [k] local_clock
       0.17%     -0.05%  [kernel.kallsyms]  [k] native_write_msr_safe

  # Event 'faults'
  #
  # Baseline  Delta          Shared Object                          Symbol
  # ........ ..........  .................  ..............................
  #
       0.00%    +79.12%  ld-2.15.so         [.] _dl_relocate_object
       0.00%    +11.62%  ld-2.15.so         [.] openaux
Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1346946426-13496-2-git-send-email-jolsa@redhat.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      863e451f
  3. 07 Sep, 2012 5 commits
  5. 06 Sep, 2012 8 commits
  7. 05 Sep, 2012 18 commits
  9. 28 Aug, 2012 7 commits
    • Oleg Nesterov's avatar
      uprobes: Remove "verify" argument from set_orig_insn() · ded86e7c
      Oleg Nesterov authored 
      Nobody does set_orig_insn(verify => false), and I think nobody will.
Remove this argument. IIUC set_orig_insn(verify => false) was needed
to single-step without xol area.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      ded86e7c
    • Oleg Nesterov's avatar
      uprobes: Fold uprobe_reset_state() into uprobe_dup_mmap() · 61559a81
      Oleg Nesterov authored 
      Now that we have uprobe_dup_mmap() we can fold uprobe_reset_state()
into the new hook and remove it. mmput()->uprobe_clear_state() can't
be called before dup_mmap().
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      61559a81
    • Oleg Nesterov's avatar
      uprobes: Introduce MMF_HAS_UPROBES · f8ac4ec9
      Oleg Nesterov authored 
      Add the new MMF_HAS_UPROBES flag. It is set by install_breakpoint()
and it is copied by dup_mmap(), uprobe_pre_sstep_notifier() checks
it to avoid the slow path if the task was never probed. Perhaps it
makes sense to check it in valid_vma(is_register => false) as well.

This needs the new dup_mmap()->uprobe_dup_mmap() hook. We can't use
uprobe_reset_state() or put MMF_HAS_UPROBES into MMF_INIT_MASK, we
need oldmm->mmap_sem to avoid the race with uprobe_register() or
mmap() from another thread.

Currently we never clear this bit, it can be false-positive after
uprobe_unregister() or uprobe_munmap() or if dup_mmap() hits the
probed VM_DONTCOPY vma. But this is fine correctness-wise and has
no effect unless the task hits the non-uprobe breakpoint.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      f8ac4ec9
    • Oleg Nesterov's avatar
      uprobes: Do not use -EEXIST in install_breakpoint() paths · 78f74116
      Oleg Nesterov authored 
      -EEXIST from install_breakpoint() no longer makes sense, all
callers should simply treat it as "success". Change the code
to return zero and simplify register_for_each_vma().
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      78f74116
    • Oleg Nesterov's avatar
      uprobes: Change uprobe_mmap() to ignore the errors but check fatal_signal_pending() · 5e5be71a
      Oleg Nesterov authored 
      Once install_breakpoint() fails uprobe_mmap() "ignores" all other
uprobes and returns the error.

It was never really needed to to stop after the first error, and
in fact it was always wrong at least in -ENOTSUPP case.

Change uprobe_mmap() to ignore the errors and always return 0.
This is not what we want in the long term, but until we teach
the callers to handle the failure it would be better to remove
the pointless complications. And this doesn't look too bad, the
only "reasonable" error is ENOMEM but in this case the caller
should be oom-killed in the likely case or the system has more
serious problems.

However it makes sense to stop if fatal_signal_pending() == T.
In particular this helps if the task was oom-killed.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      5e5be71a
    • Oleg Nesterov's avatar
      uprobes: Kill dup_mmap()->uprobe_mmap(), simplify uprobe_mmap/munmap · f1a45d02
      Oleg Nesterov authored 
      1. Kill dup_mmap()->uprobe_mmap(), it was only needed to calculate
   new_mm->uprobes_state.count removed by the previous patch.

   If the forking process has a pending uprobe (int3) in vma, it will
   be copied by copy_page_range(), note that it checks vma->anon_vma
   so "Don't copy ptes" is not possible after install_breakpoint()
   which does anon_vma_prepare().

2. Remove is_swbp_at_addr() and "int count" in uprobe_mmap(). Again,
   this was needed for uprobes_state.count.

   As a side effect this fixes the bug pointed out by Srikar,
   this code lacked the necessary put_uprobe().

3. uprobe_munmap() becomes a nop after the previous patch. Remove the
   meaningless code but do not remove the helper, we will need it.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      f1a45d02
    • Oleg Nesterov's avatar
      uprobes: Kill uprobes_state->count · 647c42df
      Oleg Nesterov authored 
      uprobes_state->count is only needed to avoid the slow path in
uprobe_pre_sstep_notifier(). It is also checked in uprobe_munmap()
but ironically its only goal to decrement this counter. However,
it is very broken. Just some examples:

- uprobe_mmap() can race with uprobe_unregister() and wrongly
  increment the counter if it hits the non-uprobe "int3". Note
  that install_breakpoint() checks ->consumers first and returns
  -EEXIST if it is NULL.

  "atomic_sub() if error" in uprobe_mmap() looks obviously wrong
  too.

- uprobe_munmap() can race with uprobe_register() and wrongly
  decrement the counter by the same reason.

- Suppose an appication tries to increase the mmapped area via
  sys_mremap(). vma_adjust() does uprobe_munmap(whole_vma) first,
  this can nullify the counter temporarily and race with another
  thread which can hit the bp, the application will be killed by
  SIGTRAP.

- Suppose an application mmaps 2 consecutive areas in the same file
  and one (or both) of these areas has uprobes. In the likely case
  mmap_region()->vma_merge() suceeds. Like above, this leads to
  uprobe_munmap/uprobe_mmap from vma_merge()->vma_adjust() but then
  mmap_region() does another uprobe_mmap(resulting_vma) and doubles
  the counter.

This patch only removes this counter and fixes the compile errors,
then we will try to cleanup the changed code and add something else
instead.
Signed-off-by: default avatarOleg Nesterov <oleg@redhat.com>
Acked-by: default avatarSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      647c42df
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7