Skip to content

L
linux
Switch branch/tag
  1. 02 Dec, 2014 8 commits
    • Jiang Lu's avatar
      powerpc/oprofile: Disable pagefaults during user stack read · 0de3b56b
      Jiang Lu authored 
      A page fault occurred during reading user stack in oprofile backtrace
would lead following calltrace:

WARNING: at linux/kernel/smp.c:210
Modules linked in:
CPU: 5 PID: 736 Comm: sh Tainted: G W 3.14.23-WR7.0.0.0_standard #1
task: c0000000f6208bc0 ti: c00000007c72c000 task.ti: c00000007c72c000
NIP: c0000000000ed6e4 LR: c0000000000ed5b8 CTR: 0000000000000000
REGS: c00000007c72f050 TRAP: 0700 Tainted: G W (3.14.23-WR7.0.0
tandard)
MSR: 0000000080021000 <CE,ME> CR: 48222482 XER: 00000000
SOFTE: 0
GPR00: c0000000000ed5b8 c00000007c72f2d0 c0000000010aa048 0000000000000005
GPR04: c000000000fdb820 c00000007c72f410 0000000000000001 0000000000000005
GPR08: c0000000010b5768 c000000000f8a048 0000000000000001 0000000000000000
GPR12: 0000000048222482 c00000000fffe580 0000000022222222 0000000010129664
GPR16: 0000000010143cc0 0000000000000000 0000000044444444 0000000000000000
GPR20: c00000007c7221d8 c0000000f638e3c8 000003f15a20120d 0000000000000001
GPR24: 000000005a20120d c00000007c722000 c00000007cdedda8 00003fffef23b160
GPR28: 0000000000000001 c00000007c72f410 c000000000fdb820 0000000000000006
NIP [c0000000000ed6e4] .smp_call_function_single+0x18c/0x248
LR [c0000000000ed5b8] .smp_call_function_single+0x60/0x248
Call Trace:
[c00000007c72f2d0] [c0000000000ed5b8] .smp_call_function_single+0x60/0x248 (unreliable)
[c00000007c72f3a0] [c000000000030810] .__flush_tlb_page+0x164/0x1b0
[c00000007c72f460] [c00000000002e054] .ptep_set_access_flags+0xb8/0x168
[c00000007c72f500] [c0000000001ad3d8] .handle_mm_fault+0x4a8/0xbac
[c00000007c72f5e0] [c000000000bb3238] .do_page_fault+0x3b8/0x868
[c00000007c72f810] [c00000000001e1d0] storage_fault_common+0x20/0x44
 Exception: 301 at .__copy_tofrom_user_base+0x54/0x5b0
    LR = .op_powerpc_backtrace+0x190/0x20c
[c00000007c72fb00] [c000000000a2ec34] .op_powerpc_backtrace+0x204/0x20c (unreliable)
[c00000007c72fbc0] [c000000000a2b5fc] .oprofile_add_ext_sample+0xe8/0x118
[c00000007c72fc70] [c000000000a2eee0] .fsl_emb_handle_interrupt+0x20c/0x27c
[c00000007c72fd30] [c000000000a2e440] .op_handle_interrupt+0x44/0x58
[c00000007c72fdb0] [c000000000016d68] .performance_monitor_exception+0x74/0x90
[c00000007c72fe30] [c00000000001d8b4] exc_0x260_common+0xfc/0x100

performance_monitor_exception() is executed in a context with interrupt
disabled and preemption enabled. When there is a user space page fault
happened, do_page_fault() invoke in_atomic() to decide whether kernel
should handle such page fault. in_atomic() only check preempt_count.
So need call pagefault_disable() to disable preemption before reading
user stack.
Signed-off-by: default avatarJiang Lu <lu.jiang@windriver.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      0de3b56b
    • Aneesh Kumar K.V's avatar
      powerpc/mm: Check for matching hpte without taking hpte lock · 0ec2698f
      Aneesh Kumar K.V authored 
      With smaller hash page table config, we would end up in situation
where we would be replacing hash page table slot frequently. In
such config, we will find the hpte to be not matching, and we
can do that check without holding the hpte lock. We need to
recheck the hpte again after holding lock.
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      0ec2698f
    • Greg Kurz's avatar
      powerpc: Drop useless warning in eeh_init() · 221195fb
      Greg Kurz authored 
      This is what we get in dmesg when booting a pseries guest and
the hypervisor doesn't provide EEH support.

[    0.166655] EEH functionality not supported
[    0.166778] eeh_init: Failed to call platform init function (-22)

Since both powernv_eeh_init() and pseries_eeh_init() already complain when
hitting an error, it is not needed to print more (especially such an
uninformative message).
Signed-off-by: default avatarGreg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      221195fb
    • Mahesh Salgaonkar's avatar
      powerpc/powernv: Cleanup unused MCE definitions/declarations. · 6d626c5e
      Mahesh Salgaonkar authored 
      Cleanup OpalMCE_* definitions/declarations and other related code which
is not used anymore.
Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: default avatarBenjamin Herrrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      6d626c5e
    • Gavin Shan's avatar
      powerpc/eeh: Dump PHB diag-data early · a450e8f5
      Gavin Shan authored 
      On PowerNV platform, PHB diag-data is dumped after stopping device
drivers. In case of recursive EEH errors, the kernel is usually
crashed before dumping PHB diag-data for the second EEH error. It's
hard to locate the root cause of the second EEH error without PHB
diag-data.

The patch adds one more EEH option "eeh=early_log", which helps
dumping PHB diag-data immediately once frozen PE is detected, in
order to get the PHB diag-data for the second EEH error.
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      a450e8f5
    • Gavin Shan's avatar
      powerpc/eeh: Recover EEH error on ownership change for BCM5719 · b1d76a7d
      Gavin Shan authored 
      In PCI passthrou scenario, we need simulate EEH recovery for Emulex
adapters when their ownership changes, as we did in commit 5cfb20b9
("powerpc/eeh: Emulate EEH recovery for VFIO devices"). Broadcom
BCM5719 adpaters are facing same problem and needs same cure.
Reported-by: default avatarRajeshkumar Subramanian <rajeshkumars@in.ibm.com>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b1d76a7d
    • Gavin Shan's avatar
      powerpc/eeh: Set EEH_PE_RESET on PE reset · 28bf36f9
      Gavin Shan authored 
      The patch introduces additional flag EEH_PE_RESET to indicate the
corresponding PE is under reset. In turn, the PE retrieval bakcend
on PowerNV platform can return unfrozen state for the EEH core to
moving forward. Flag EEH_PE_CFG_BLOCKED isn't the correct one for
the purpose.

In PCI passthrou case, the problem is more worse: Guest doesn't
recover 6th EEH error. The PE is left in isolated (frozen) and
config blocked state on Broadcom adapters. We can't retrieve the
PE's state correctly any more, even from the host side via sysfs
/sys/bus/pci/devices/xxx/eeh_pe_state.
Reported-by: default avatarRajeshkumar Subramanian <rajeshkumars@in.ibm.com>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      28bf36f9
    • Gavin Shan's avatar
      powerpc/eeh: Refactor eeh_reset_pe() · b85743ee
      Gavin Shan authored 
      The patch refactors eeh_reset_pe() in order for:

   * Varied return values for different failure cases.
   * Replace pr_err() with pr_warn() and print function name.
   * Coding style cleanup.
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b85743ee
  3. 18 Nov, 2014 4 commits
    • Michael Ellerman's avatar
      Merge remote-tracking branch 'scottwood/next' into next · 35891d40
      Michael Ellerman authored 
      Scott says:

"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."
      35891d40
    • Michael Neuling's avatar
      cxl: Name interrupts in /proc/interrupt · 80fa93fc
      Michael Neuling authored 
      Currently all interrupts generated by cxl are named "cxl".  This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers.  Being able to distinguish them is useful
for setting affinity.

This patch gives each of these names in /proc/interrupts.

A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:

    % grep cxl /proc/interrupts
    444:          0  OPAL ICS 141312 Level     cxl-card1-err
    445:          0  OPAL ICS 141313 Level     cxl-afu1.0-err
    446:          0  OPAL ICS 141314 Level     cxl-afu1.0
    462:          0  OPAL ICS 2052 Level     cxl-afu0.0-pe0-1
    463:      75517  OPAL ICS 2053 Level     cxl-afu0.0-pe0-2
    468:          0  OPAL ICS 2054 Level     cxl-afu0.0-pe0-3
    469:          0  OPAL ICS 2055 Level     cxl-afu0.0-pe0-4
    470:          0  OPAL ICS 2056 Level     cxl-afu0.0-pe1-1
    471:      75506  OPAL ICS 2057 Level     cxl-afu0.0-pe1-2
    472:          0  OPAL ICS 2058 Level     cxl-afu0.0-pe1-3
    473:          0  OPAL ICS 2059 Level     cxl-afu0.0-pe1-4
    502:       1066  OPAL ICS 2050 Level     cxl-afu0.0
    514:          0  OPAL ICS 2048 Level     cxl-card0-err
    515:          0  OPAL ICS 2049 Level     cxl-afu0.0-err
Signed-off-by: default avatarMichael Neuling <mikey@neuling.org>
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      80fa93fc
    • Ian Munsie's avatar
      cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning · bc78b05b
      Ian Munsie authored 
      If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      bc78b05b
    • Prabhakar Kushwaha's avatar
      powerpc/config: Enable memory driver · 76f3e292
      Prabhakar Kushwaha authored 
      As Freescale IFC controller has been moved to driver to driver/memory.

So enable memory driver in powerpc config
Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
      76f3e292
  5. 17 Nov, 2014 2 commits
    • Neelesh Gupta's avatar
      rtc/tpo: Driver to support rtc and wakeup on PowerNV platform · 16b1d26e
      Neelesh Gupta authored 
      The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.

The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.

Test results:
-------------
Host:
[root@tul169p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0
[root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
08:10:07
[root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm
[root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1413274345
[root@tul169p1 ~]#

FSP:
$ smgr mfgState
standby
$ rtim timeofday

System time is valid: 2014/10/14 08:12:04.225115

$ smgr mfgState
ipling
$

CC: devicetree@vger.kernel.org
CC: tglx@linutronix.de
CC: rtc-linux@googlegroups.com
CC: a.zummo@towertech.it
Signed-off-by: default avatarNeelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      16b1d26e
    • Vineeth Vijayan's avatar
      powerpc: Use generic PIE randomization · 59994fb0
      Vineeth Vijayan authored 
      Back in 2009 we merged 501cb16d "Randomise PIEs", which added support for
randomizing PIE (Position Independent Executable) binaries.

That commit added randomize_et_dyn(), which correctly randomized the addresses,
but failed to honor PF_RANDOMIZE. That means it was not possible to disable PIE
randomization via the personality flag, or /proc/sys/kernel/randomize_va_space.

Since then there has been generic support for PIE randomization added to
binfmt_elf.c, selectable via ARCH_BINFMT_ELF_RANDOMIZE_PIE.

Enabling that allows us to drop randomize_et_dyn(), which means we start
honoring PF_RANDOMIZE correctly.

It also causes a fairly major change to how we layout PIE binaries.

Currently we will place the binary at 512MB-520MB for 32 bit binaries, or
512MB-1.5GB for 64 bit binaries, eg:

    $ cat /proc/$$/maps
    4e550000-4e580000 r-xp 00000000 08:02 129813       /bin/dash
    4e580000-4e590000 rw-p 00020000 08:02 129813       /bin/dash
    10014110000-10014140000 rw-p 00000000 00:00 0      [heap]
    3fffaa3f0000-3fffaa5a0000 r-xp 00000000 08:02 921  /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fffaa5a0000-3fffaa5b0000 rw-p 001a0000 08:02 921  /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fffaa5c0000-3fffaa5d0000 rw-p 00000000 00:00 0
    3fffaa5d0000-3fffaa5f0000 r-xp 00000000 00:00 0    [vdso]
    3fffaa5f0000-3fffaa620000 r-xp 00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fffaa620000-3fffaa630000 rw-p 00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
    3ffffc340000-3ffffc370000 rw-p 00000000 00:00 0    [stack]

With this commit applied we don't do any special randomisation for the binary,
and instead rely on mmap randomisation. This means the binary ends up at high
addresses, eg:

    $ cat /proc/$$/maps
    3fff99820000-3fff999d0000 r-xp 00000000 08:02 921    /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fff999d0000-3fff999e0000 rw-p 001a0000 08:02 921    /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fff999f0000-3fff99a00000 rw-p 00000000 00:00 0
    3fff99a00000-3fff99a20000 r-xp 00000000 00:00 0      [vdso]
    3fff99a20000-3fff99a50000 r-xp 00000000 08:02 1246   /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fff99a50000-3fff99a60000 rw-p 00020000 08:02 1246   /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fff99a60000-3fff99a90000 r-xp 00000000 08:02 129813 /bin/dash
    3fff99a90000-3fff99aa0000 rw-p 00020000 08:02 129813 /bin/dash
    3fffc3de0000-3fffc3e10000 rw-p 00000000 00:00 0      [stack]
    3fffc55e0000-3fffc5610000 rw-p 00000000 00:00 0      [heap]

Although this should be OK, it's possible it might break badly written
binaries that make assumptions about the address space layout.
Signed-off-by: default avatarVineeth Vijayan <vvijayan@mvista.com>
[mpe: Rewrite changelog]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      59994fb0
  7. 14 Nov, 2014 12 commits
  9. 13 Nov, 2014 7 commits
  11. 12 Nov, 2014 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7