1. 10 May, 2018 11 commits
  2. 09 May, 2018 1 commit
    • Heiner Kallweit's avatar
      r8169: fix powering up RTL8168h · 3148dedf
      Heiner Kallweit authored
      Since commit a92a0849 "r8169: improve runtime pm in general and
      suspend unused ports" interfaces w/o link are runtime-suspended after
      10s. On systems where drivers take longer to load this can lead to the
      situation that the interface is runtime-suspended already when it's
      initially brought up.
      This shouldn't be a problem because rtl_open() resumes MAC/PHY.
      However with at least one chip version the interface doesn't properly
      come up, as reported here:
      https://bugzilla.kernel.org/show_bug.cgi?id=199549
      
      The vendor driver uses a delay to give certain chip versions some
      time to resume before starting the PHY configuration. So let's do
      the same. I don't know which chip versions may be affected,
      therefore apply this delay always.
      
      This patch was reported to fix the issue for RTL8168h.
      I was able to reproduce the issue on an Asus H310I-Plus which also
      uses a RTL8168h. Also in my case the patch fixed the issue.
      Reported-by: default avatarSlava Kardakov <ojab@ojab.ru>
      Tested-by: default avatarSlava Kardakov <ojab@ojab.ru>
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3148dedf
  3. 08 May, 2018 24 commits
    • David S. Miller's avatar
      Merge tag 'linux-can-fixes-for-4.17-20180508' of... · 42f02130
      David S. Miller authored
      Merge tag 'linux-can-fixes-for-4.17-20180508' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
      
      Marc Kleine-Budde says:
      
      ====================
      pull-request: can 2018-05-08
      
      this is a pull request for 7 patches for net/master.
      
      The first patch is by Jakob Unterwurzacher and increases the severity of
      bus-off messages in the generic CAN device infrastructure. The next two patches
      are by Uwe Kleine-König and fix the endianess detection in the flexcan driver.
      Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for
      dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov
      two patches for the rcan_canfd device tree binding description.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      42f02130
    • David S. Miller's avatar
      Merge branch 'ieee802154-for-davem-2018-05-08' of... · 2dabf9f2
      David S. Miller authored
      Merge branch 'ieee802154-for-davem-2018-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
      
      Stefan Schmidt says:
      
      ====================
      pull-request: ieee802154 2018-05-08
      
      An update from ieee802154 for your *net* tree.
      
      Two fixes for the mcr20a driver, which was being added in the 4.17 merge window,
      by Gustavo and myself.
      The atusb driver got a change to GFP_KERNEL where no GFP_ATOMIC is needed by
      Jia-Ju.
      
      The last and most important fix is from Alex to get IPv6 reassembly working
      again for the ieee802154 6lowpan adaptation. This got broken in 4.16 so please
      queue this one also up for the 4.16 stable tree.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2dabf9f2
    • Sergei Shtylyov's avatar
      DT: net: can: rcar_canfd: document R8A77980 bindings · 7a25ac2f
      Sergei Shtylyov authored
      Document the R-Car V3H (R8A77980) SoC support in the R-Car CAN-FD bindings.
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      7a25ac2f
    • Sergei Shtylyov's avatar
      DT: net: can: rcar_canfd: document R8A77970 bindings · 0a4fe40e
      Sergei Shtylyov authored
      Document the R-Car V3M (R8A77970) SoC support in the R-Car CAN-FD bindings.
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Reviewed-by: default avatarRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
      Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      0a4fe40e
    • Geert Uytterhoeven's avatar
      1469c5f0
    • Jimmy Assarsson's avatar
      can: kvaser_usb: Increase correct stats counter in kvaser_usb_rx_can_msg() · 6ee00865
      Jimmy Assarsson authored
      Increase rx_dropped, if alloc_can_skb() fails, not tx_dropped.
      Signed-off-by: default avatarJimmy Assarsson <extja@kvaser.com>
      Cc: linux-stable <stable@vger.kernel.org>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      6ee00865
    • Uwe Kleine-König's avatar
      arm: dts: imx[35]*: declare flexcan devices to be compatible to imx25's flexcan · 9a62dcf4
      Uwe Kleine-König authored
      Commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx
      series dts") removed the fallback compatible "fsl,p1010-flexcan" from
      the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53
      are identical, introduce the first as fallback for the two latter ones.
      
      Fixes: d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts")
      Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
      Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      9a62dcf4
    • Uwe Kleine-König's avatar
      can: flexcan: fix endianess detection · 0e030a37
      Uwe Kleine-König authored
      In commit 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs
      for big endian FlexCAN controllers.") the following logic was
      implemented:
      
      	if the dt property "big-endian" is given or
      	   the device is compatible to "fsl,p1010-flexcan":
      		use big-endian mode;
      	else
      		use little-endian mode;
      
      This relies on commit d50f4630 ("arm: dts: Remove p1010-flexcan
      compatible from imx series dts") which was applied a few commits later.
      Without this commit (or an old device tree used for booting a new
      kernel) the flexcan devices on i.MX25, i.MX28, i.MX35 and i.MX53 match
      the 'the device is compatible to "fsl,p1010-flexcan"' test and so are
      switched erroneously to big endian mode.
      
      Instead of the check above put a quirk in devtype data and rely on
      of_match_device yielding the most compatible match
      
      Fixes: 88462d2a ("can: flexcan: Remodel FlexCAN register r/w APIs for big endian FlexCAN controllers.")
      Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
      Tested-by: default avatarGavin Schenk <g.schenk@eckelmann.de>
      Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      0e030a37
    • Jakob Unterwurzacher's avatar
      can: dev: increase bus-off message severity · 71c23a82
      Jakob Unterwurzacher authored
      bus-off is usually caused by hardware malfunction or configuration error
      (baud rate mismatch) and causes a complete loss of communication.
      
      Increase the "bus-off" message's severity from netdev_dbg() to
      netdev_info() to make it visible to the user.
      
      A can interface going into bus-off is similar in severity to ethernet's
      "Link is Down" message, which is also printed at info level.
      
      It is debatable whether the the "restarted" message should also be
      changed to netdev_info() to make the interface state changes
      comprehensible from the kernel log. I have chosen to keep the
      "restarted" message at dbg for now as the "bus-off" message should be
      enough for the user to notice and investigate the problem.
      Signed-off-by: default avatarJakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
      Cc: linux-can@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      71c23a82
    • Eric Dumazet's avatar
      llc: better deal with too small mtu · 2c5d5b13
      Eric Dumazet authored
      syzbot loves to set very small mtu on devices, since it brings joy.
      We must make llc_ui_sendmsg() fool proof.
      
      usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!
      
      kernel BUG at mm/usercopy.c:100!
      invalid opcode: 0000 [#1] SMP KASAN
      Dumping ftrace buffer:
         (ftrace buffer empty)
      Modules linked in:
      CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
      RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
      RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
      RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
      RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
      R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
      R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
      FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
      DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
      Call Trace:
       check_bogus_address mm/usercopy.c:153 [inline]
       __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
       check_object_size include/linux/thread_info.h:108 [inline]
       check_copy_size include/linux/thread_info.h:139 [inline]
       copy_from_iter_full include/linux/uio.h:121 [inline]
       memcpy_from_msg include/linux/skbuff.h:3305 [inline]
       llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
       sock_sendmsg_nosec net/socket.c:629 [inline]
       sock_sendmsg+0xd5/0x120 net/socket.c:639
       __sys_sendto+0x3d7/0x670 net/socket.c:1789
       __do_sys_sendto net/socket.c:1801 [inline]
       __se_sys_sendto net/socket.c:1797 [inline]
       __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
       do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x455979
      RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
      RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
      RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
      RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
      R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
      R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
      Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
      RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2c5d5b13
    • David S. Miller's avatar
      Merge branch 'Aquantia-various-patches-2018-05' · 895b6176
      David S. Miller authored
      Igor Russkikh says:
      
      ====================
      Aquantia various patches 2018-05
      
      These are two patches covering issues found during test cycles:
      
      First is that driver should declare valid vlan_features
      Second fix is about correct allocation of MSI interrupts on some systems.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      895b6176
    • Igor Russkikh's avatar
      net: aquantia: Limit number of vectors to actually allocated irqs · a09bd81b
      Igor Russkikh authored
      Driver should use pci_alloc_irq_vectors return value to correct number
      of allocated vectors and napi instances. Otherwise it'll panic later
      in pci_irq_vector.
      
      Driver also should allow more than one MSI vectors to be allocated.
      
      Error return path from pci_alloc_irq_vectors is also fixed to revert
      resources in a correct sequence when error happens.
      Reported-by: default avatarLong, Nicholas <nicholas.a.long@baesystems.com>
      Fixes: 23ee07ad ("net: aquantia: Cleanup pci functions module")
      Signed-off-by: default avatarIgor Russkikh <igor.russkikh@aquantia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a09bd81b
    • Igor Russkikh's avatar
      net: aquantia: driver should correctly declare vlan_features bits · 8c61ab7f
      Igor Russkikh authored
      In particular, not reporting SG forced skbs to be linear for vlan
      interfaces over atlantic NIC.
      
      With this fix it is possible to enable SG feature on device and
      therefore optimize performance.
      Reported-by: default avatarMa Yuying <yuma@redhat.com>
      Signed-off-by: default avatarIgor Russkikh <igor.russkikh@aquantia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8c61ab7f
    • Georg Hofmann's avatar
      trivial: fix inconsistent help texts · a9f71d0d
      Georg Hofmann authored
      This patch removes "experimental" from the help text where depends on
      CONFIG_EXPERIMENTAL was already removed.
      Signed-off-by: default avatarGeorg Hofmann <georg@hofmannsweb.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a9f71d0d
    • Steffen Klassert's avatar
      MAINTAINERS: Update the 3c59x network driver entry · 5ed3fde2
      Steffen Klassert authored
      Replace my old E-Mail address with a working one.
      While at it, change the maintainance status to
      'Odd Fixes'. I'm still around with some knowledge,
      but don't actively maintain it anymore.
      Signed-off-by: default avatarSteffen Klassert <steffen.klassert@secunet.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5ed3fde2
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · 1822f638
      David S. Miller authored
      Steffen Klassert says:
      
      ====================
      pull request (net): ipsec 2018-05-07
      
      1) Always verify length of provided sadb_key to fix a
         slab-out-of-bounds read in pfkey_add. From Kevin Easton.
      
      2) Make sure that all states are really deleted
         before we check that the state lists are empty.
         Otherwise we trigger a warning.
      
      3) Fix MTU handling of the VTI6 interfaces on
         interfamily tunnels. From Stefano Brivio.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1822f638
    • Andre Tomt's avatar
      net/tls: Fix connection stall on partial tls record · 080324c3
      Andre Tomt authored
      In the case of writing a partial tls record we forgot to clear the
      ctx->in_tcp_sendpages flag, causing some connections to stall.
      
      Fixes: c212d2c7 ("net/tls: Don't recursively call push_record during tls_write_space callbacks")
      Signed-off-by: default avatarAndre Tomt <andre@tomt.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      080324c3
    • Wolfram Sang's avatar
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Fix PHY interrupts by parameterising PHY base address · 9255bacd
      Andrew Lunn authored
      Most of the mv88e6xxx switches have the PHYs at address 0, 1, 2, ...
      The 6341 however has the PHYs at 0x10, 0x11, 0x12. Add a parameter to
      the info structure for this base address.
      
      Testing of 6f88284f ("net: dsa: mv88e6xxx: Add MDIO interrupts for
      internal PHYs") was performed on the 6341. So it works only on the
      6341. Use this base information to correctly set the interrupt.
      
      Fixes: 6f88284f ("net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs")
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9255bacd
    • Eric Dumazet's avatar
      tls: fix use after free in tls_sk_proto_close · 98f0a395
      Eric Dumazet authored
      syzbot reported a use-after-free in tls_sk_proto_close
      
      Add a boolean value to cleanup a bit this function.
      
      BUG: KASAN: use-after-free in tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297
      Read of size 1 at addr ffff8801ae40a858 by task syz-executor363/4503
      
      CPU: 0 PID: 4503 Comm: syz-executor363 Not tainted 4.17.0-rc3+ #34
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x1b9/0x294 lib/dump_stack.c:113
       print_address_description+0x6c/0x20b mm/kasan/report.c:256
       kasan_report_error mm/kasan/report.c:354 [inline]
       kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
       __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
       tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297
       inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
       inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
       sock_release+0x96/0x1b0 net/socket.c:594
       sock_close+0x16/0x20 net/socket.c:1149
       __fput+0x34d/0x890 fs/file_table.c:209
       ____fput+0x15/0x20 fs/file_table.c:243
       task_work_run+0x1e4/0x290 kernel/task_work.c:113
       exit_task_work include/linux/task_work.h:22 [inline]
       do_exit+0x1aee/0x2730 kernel/exit.c:865
       do_group_exit+0x16f/0x430 kernel/exit.c:968
       get_signal+0x886/0x1960 kernel/signal.c:2469
       do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810
       exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162
       prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
       syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
       do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x4457b9
      RSP: 002b:00007fdf4d766da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
      RAX: fffffffffffffe00 RBX: 00000000006dac3c RCX: 00000000004457b9
      RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000006dac3c
      RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac38
      R13: 3692738801137283 R14: 6bf92c39443c4c1d R15: 0000000000000006
      
      Allocated by task 4498:
       save_stack+0x43/0xd0 mm/kasan/kasan.c:448
       set_track mm/kasan/kasan.c:460 [inline]
       kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
       kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
       kmalloc include/linux/slab.h:512 [inline]
       kzalloc include/linux/slab.h:701 [inline]
       create_ctx net/tls/tls_main.c:521 [inline]
       tls_init+0x1f9/0xb00 net/tls/tls_main.c:633
       tcp_set_ulp+0x1bc/0x520 net/ipv4/tcp_ulp.c:153
       do_tcp_setsockopt.isra.39+0x44a/0x2600 net/ipv4/tcp.c:2588
       tcp_setsockopt+0xc1/0xe0 net/ipv4/tcp.c:2893
       sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039
       __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
       __do_sys_setsockopt net/socket.c:1914 [inline]
       __se_sys_setsockopt net/socket.c:1911 [inline]
       __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
       do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 4503:
       save_stack+0x43/0xd0 mm/kasan/kasan.c:448
       set_track mm/kasan/kasan.c:460 [inline]
       __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
       kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
       __cache_free mm/slab.c:3498 [inline]
       kfree+0xd9/0x260 mm/slab.c:3813
       tls_sw_free_resources+0x2a3/0x360 net/tls/tls_sw.c:1037
       tls_sk_proto_close+0x67c/0x9c0 net/tls/tls_main.c:288
       inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
       inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
       sock_release+0x96/0x1b0 net/socket.c:594
       sock_close+0x16/0x20 net/socket.c:1149
       __fput+0x34d/0x890 fs/file_table.c:209
       ____fput+0x15/0x20 fs/file_table.c:243
       task_work_run+0x1e4/0x290 kernel/task_work.c:113
       exit_task_work include/linux/task_work.h:22 [inline]
       do_exit+0x1aee/0x2730 kernel/exit.c:865
       do_group_exit+0x16f/0x430 kernel/exit.c:968
       get_signal+0x886/0x1960 kernel/signal.c:2469
       do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810
       exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162
       prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
       syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
       do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      The buggy address belongs to the object at ffff8801ae40a800
       which belongs to the cache kmalloc-256 of size 256
      The buggy address is located 88 bytes inside of
       256-byte region [ffff8801ae40a800, ffff8801ae40a900)
      The buggy address belongs to the page:
      page:ffffea0006b90280 count:1 mapcount:0 mapping:ffff8801ae40a080 index:0x0
      flags: 0x2fffc0000000100(slab)
      raw: 02fffc0000000100 ffff8801ae40a080 0000000000000000 000000010000000c
      raw: ffffea0006bea9e0 ffffea0006bc94a0 ffff8801da8007c0 0000000000000000
      page dumped because: kasan: bad access detected
      
      Fixes: dd0bed16 ("tls: support for Inline tls record")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Atul Gupta <atul.gupta@chelsio.com>
      Cc: Steve Wise <swise@opengridcomputing.com>
      Cc: Ilya Lesokhin <ilyal@mellanox.com>
      Cc: Aviad Yehezkel <aviadye@mellanox.com>
      Cc: Dave Watson <davejwatson@fb.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      98f0a395
    • Xin Long's avatar
      sctp: delay the authentication for the duplicated cookie-echo chunk · 59d8d443
      Xin Long authored
      Now sctp only delays the authentication for the normal cookie-echo
      chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But
      for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does
      authentication first based on the old asoc, which will definitely
      fail due to the different auth info in the old asoc.
      
      The duplicated cookie-echo chunk will create a new asoc with the
      auth info from this chunk, and the authentication should also be
      done with the new asoc's auth info for all of the collision 'A',
      'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth
      will never pass the authentication and create the new connection.
      
      This issue exists since very beginning, and this fix is to make
      sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does
      for the normal cookie-echo chunk to delay the authentication.
      
      While at it, remove the unused params from sctp_sf_authenticate()
      and define sctp_auth_chunk_verify() used for all the places that
      do the delayed authentication.
      
      v1->v2:
        fix the typo in changelog as Marcelo noticed.
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      59d8d443
    • Moritz Fischer's avatar
      net: nixge: Address compiler warnings about signedness · a86b74d3
      Moritz Fischer authored
      Fixes the following warnings:
      warning: pointer targets in passing argument 1 of
      ‘is_valid_ether_addr’ differ in signedness [-Wpointer-sign]
        if (mac_addr && is_valid_ether_addr(mac_addr)) {
                                            ^~~~~~~~
      expected ‘const u8 * {aka const unsigned char *}’ but argument
      is of type ‘const char *’
       static inline bool is_valid_ether_addr(const u8 *addr)
                          ^~~~~~~~~~~~~~~~~~~
      warning: pointer targets in passing argument 2 of
      ‘ether_addr_copy’ differ in signedness [-Wpointer-sign]
         ether_addr_copy(ndev->dev_addr, mac_addr);
                                         ^~~~~~~~
      expected ‘const u8 * {aka const unsigned char *}’ but argument
      is of type ‘const char *’
       static inline void ether_addr_copy(u8 *dst, const u8 *src)
      Signed-off-by: default avatarMoritz Fischer <mdf@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a86b74d3
    • Moritz Fischer's avatar
      net: nixge: Fix error path for obtaining mac address · abcd3d6f
      Moritz Fischer authored
      Fix issue where nixge_get_nvmem_address() returns a non-NULL
      return value on a failed nvmem_cell_get() that causes an invalid
      access when error value encoded in pointer is dereferenced.
      
      Furthermore ensure that buffer allocated by nvmem_cell_read()
      actually gets kfreed() if the function succeeds.
      
      Fixes commit 492caffa ("net: ethernet: nixge: Add support for
      National Instruments XGE netdev")
      Reported-by: default avatarAlex Williams <alex.williams@ni.com>
      Signed-off-by: default avatarMoritz Fischer <mdf@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      abcd3d6f
    • Anders Roxell's avatar
      selftests: net: use TEST_PROGS_EXTENDED · 1751eb42
      Anders Roxell authored
      When a script file that isn't generated uses the variable
      TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is
      performed the script file gets removed and git shows the file as
      deleted. For script files that isn't generated TEST_PROGS_EXTENDED
      should be used.
      
      Fixes: 9faedd64 ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED")
      Signed-off-by: default avatarAnders Roxell <anders.roxell@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1751eb42
  4. 07 May, 2018 1 commit
  5. 04 May, 2018 3 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 2ba5622f
      David S. Miller authored
      Daniel Borkmann says:
      
      ====================
      pull-request: bpf 2018-05-05
      
      The following pull-request contains BPF updates for your *net* tree.
      
      The main changes are:
      
      1) Sanitize attr->{prog,map}_type from bpf(2) since used as an array index
         to retrieve prog/map specific ops such that we prevent potential out of
         bounds value under speculation, from Mark and Daniel.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2ba5622f
    • Antoine Tenart's avatar
      net: phy: sfp: fix the BR,min computation · 52c5cd1b
      Antoine Tenart authored
      In an SFP EEPROM values can be read to get information about a given SFP
      module. One of those is the bitrate, which can be determined using a
      nominal bitrate in addition with min and max values (in %). The SFP code
      currently compute both BR,min and BR,max values thanks to this nominal
      and min,max values.
      
      This patch fixes the BR,min computation as the min value should be
      subtracted to the nominal one, not added.
      
      Fixes: 9962acf7 ("sfp: add support for 1000Base-PX and 1000Base-BX10")
      Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      52c5cd1b
    • Rob Taglang's avatar
      net: ethernet: sun: niu set correct packet size in skb · 14224923
      Rob Taglang authored
      Currently, skb->len and skb->data_len are set to the page size, not
      the packet size. This causes the frame check sequence to not be
      located at the "end" of the packet resulting in ethernet frame check
      errors. The driver does work currently, but stricter kernel facing
      networking solutions like OpenVSwitch will drop these packets as
      invalid.
      
      These changes set the packet size correctly so that these errors no
      longer occur. The length does not include the frame check sequence, so
      that subtraction was removed.
      
      Tested on Oracle/SUN Multithreaded 10-Gigabit Ethernet Network
      Controller [108e:abcd] and validated in wireshark.
      Signed-off-by: default avatarRob Taglang <rob@taglang.io>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      14224923