- 07 Mar, 2010 1 commit
-
-
Mark Brown authored
Ben Dooks' commit cf9814eb (ARM: S3C64XX: Make audio device code built unconditionally) made the struct devices for the audio blocks in the S3C64xx series processors be built unconditionally but this change seems to have gone AWOL in the various Samsung platform moves this release cycle, causing link failures with machine drivers that rely on it. Reintroduce the change. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Ben Dooks <ben-linux@fluff.org>
-
- 04 Mar, 2010 2 commits
-
-
Mark Brown authored
The reorgs of the Samsung headers have moved the GPIO bank definitions from plat/ to mach/ - the IIS driver needs to be updated to take care of this. Signed-off-by:
-
Ben Dooks authored
Commit 58bac7b8 failed to move the two PLL files s3c2440-pll-12000000.c and s3c2440-pll-16934400.c, so place these in arch/arm/mach-s3c2440 to fix this commit up. As a note, these are not built by the default configuration and thus the failure to move wasn't spotted until much later. Signed-off-by:
-
- 24 Feb, 2010 32 commits
-
-
Mark Brown authored
Follow the scheme used for IRQs. By default 16 GPIOs are allocated for board use. Signed-off-by:
-
Kukjin Kim authored
This patch adds S5PC110 default configuration file. Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Kukjin Kim authored
This patch adds S5PV210 default configuration file. Signed-off-by:
-
Kukjin Kim authored
This patch adds SMDKC110 board support file. Signed-off-by:
-
Kukjin Kim authored
This patch adds SMDKV210 board support file. Signed-off-by:
-
Kukjin Kim authored
Updates arch/arm Kconfig and Makefile for building the S5PV210 support. Also modifies the plat-s5p Kconfig file to include the support for plat-s5p for S5PV210. Signed-off-by:
-
Kukjin Kim authored
This patch adds IRQ support for S5PV210. This patch adds interrupt register definitions, IRQ definitions for various interrupt sources and new VIC base for VIC2 and VIC3 in plat-s5p common irq code. Signed-off-by:
-
Kukjin Kim authored
This patch adds clock support for S5PV210. This patch adds the clock register definitions and the various system clocks in S5PV210. Clocks that are common to other S5P SoC'c are added in the common S5P clock support. Signed-off-by:
Thomas Abraham <thomas.ab@samsung.com> Signed-off-by:
-
Kukjin Kim authored
This patch adds support for Samsung S5PV210 CPU. This patch also adds an entry for S5PV210 cpu in plat-s5p cpu table. Signed-off-by:
-
Jassi Brar authored
[Updated the device ID to -1 since there's only one IISv4 device but the S3C clock API tries to match based on the ID of the requesting device (and not the name) -- broonie.] Signed-Off-by:
Jassi Brar <jassi.brar@samsung.com> [ben-linux@fluff.org: Fixed Jassi's lastname] Signed-off-by:
-
Jassi Brar authored
This patch defines the platform device and the resources: IRQ, DMA and MEM, needed by the AC97 controller driver. Signed-off-by:
-
Mark Brown authored
The IISv4 controller is connected to the WM8580 on the board. Signed-off-by:
-
Mark Brown authored
The PMIC LED on the SMDK6410 CPU board is driven by GPIO4 of the WM8312 PMIC. Provide software control of this LED. Signed-off-by:
-
Mark Brown authored
The Wolfson Microelectronics 1192-EV1 is a plug in module for the SMDK6410 providing power using a WM8312 PMIC. This patch provides initial hookup sufficient to initialise the board, though not all features are fully described yet. As part of this supplies for the system that are provided as a single supply by one of the currently merged PMIC boards are factored out so they can be reused between different regulators. Signed-off-by:
-
Jassi Brar authored
GPIO_E-[5,9] pin functionality was defined incorrectly. The patch corrects and adds missing pins. Signed-off-by:
-
Jassi Brar authored
Add AC97 controller to platform devices and initialize the AC97 gpios. Signed-off-by:
-
Ben Dooks authored
The recent changes in the UART code mean that we need to ensure that the 4 UART case is only selected if S5PV210 is being compiled. Signed-off-by: -
Kukjin Kim authored
This patch adds UART serial port support for S5P6442. Signed-off-by:
-
Kukjin Kim authored
This patch adds S5P6442 default configuration file. Signed-off-by:
-
Kukjin Kim authored
This patch adds SMDK6442 board support file. Signed-off-by:
-
Kukjin Kim authored
Updates arch/arm Kconfig and Makefile for building the S5P6442 support. Also modifies the plat-s5p Kconfig file to include the support for plat-s5p for S5P6442. Signed-off-by:
-
Ben Dooks authored
The removal of plat-s3c has left these missing from the initial commit, so add copies from elsewhere. Signed-off-by: -
Kukjin Kim authored
This patch adds IRQ support for S5P6442. This patch adds interrupt register definitions, IRQ definitions for various interrupt sources and new VIC base for VIC2 in plat-s5p common irq code. Signed-off-by:
Adityapratap Sharma <aditya.ps@samsung.com> Signed-off-by:
Atul Dahiya <atul.dahiya@samsung.com> Signed-off-by:
-
Kukjin Kim authored
This patch adds clock support for S5P6442. This patch adds the clock register definitions and the various system clocks in S5P6442. Signed-off-by:
-
Kukjin Kim authored
This patch adds support for Samsung S5P6442 CPU. This patch also adds an entry for S5P6442 cpu in plat-s5p cpu table. Signed-off-by:
-
Vasily Khoruzhick authored
IRQ should be disabled on suspend and re-enabled on resume. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
-
Vasily Khoruzhick authored
Without resources description driver fails during initialization. Signed-off-by:
-
Ben Dooks authored
The plat-s3c directory is now clear, so remove the files in it and expunge it from the build process. Signed-off-by: -
Ben Dooks authored
Move the include/mach files out of plat-s3c and into the relevant machine files. This does mean copying the files, but there is nowhere else to put them. Signed-off-by: -
Ben Dooks authored
All these platforms select NO_IOPORT, so move it to plat-samsung Kconfig Signed-off-by: -
Ben Dooks authored
Continue the clearout of plat-s3c by moving audio-simtec.h to plat-s3c24xx as there are no current implementations outside of this platform. Signed-off-by: -
Ben Dooks authored
Move the Kconfig entries from plat-s3c to plat-samsung and plat-s3c24xx as necessary. The S3C_BOOT entries and the DMA configuration can go to plat-samsung. The low-level UART configurations are currently S3C2XX specific and can go to plat-s3c24xx. Eliminating plat-s3c from the build process will be submitted seperately. Signed-off-by:
-
- 23 Feb, 2010 5 commits
-
-
Ben Dooks authored
Move the init.c and time.c files to plat-samsung from plat-s3c, thus clearing the last files that are being built in here. Signed-off-by: -
Ben Dooks authored
Move the core of the DMA support to plat-samsung for everyone to use. Signed-off-by: -
Ben Dooks authored
Move pm.c to plat-samsung, it should be usable by all Samsung systems Signed-off-by: -
Ben Dooks authored
Move the map-base file to plat-samsung. To make the move easier, we do not change the S3C_ prefix on many of the items as this would involve going through altering all the dependencies. Signed-off-by: -
Ben Dooks authored
Move common headers from plat-s3c's include/plat directory into plat-samsung. No need to fix any files, these are still included via <plat/> Signed-off-by:
-
