- 02 Jun, 2014 1 commit
-
-
Bjorn Helgaas authored
* pci/iommu: PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges PCI: Add support for PCIe-to-PCI bridge DMA alias quirks PCI: Add function 1 DMA alias quirk for Marvell devices PCI: Add function 0 DMA alias quirk for Ricoh devices PCI: Add support for DMA alias quirks PCI: Convert pci_dev_flags definitions to bit shifts PCI: Add DMA alias iterator
-
- 30 May, 2014 13 commits
-
-
Bjorn Helgaas authored
* pci/host-exynos: PCI: exynos: Fix add_pcie_port() section mismatch warning * pci/host-imx6: PCI: imx6: Add support for MSI PCI: designware: Make MSI ISR shared IRQ aware PCI: imx6: Remove optional (and unused) IRQs PCI: imx6: Drop old IRQ mapping PCI: imx6: Use new clock names PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning * pci/resource: i82875p_edac: Assign PCI resources before adding device * pci/misc: ARM/PCI: Call pcie_bus_configure_settings() to set MPS PCI: Make pci_bus_add_device() void Conflicts: drivers/edac/i82875p_edac.c
-
Bjorn Helgaas authored
* pci/host-generic: MAINTAINERS: Add generic PCI host controller driver PCI: generic: Add generic PCI host controller driver Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
-
Will Deacon authored
Add myself as the maintainer for the generic PCI host controller driver. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Arnd Bergmann <arnd@arndb.de>
-
Will Deacon authored
Add support for a generic PCI host controller, such as a firmware-initialised device with static windows or an emulation by something such as kvmtool. The controller itself has no configuration registers and has its address spaces described entirely by the device-tree (using the bindings from ePAPR). Both CAM and ECAM are supported for Config Space accesses. Add corresponding documentation for the DT binding. [bhelgaas: currently uses the ARM-specific pci_common_init_dev() interface] Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Lucas Stach authored
This patch adds support for Message Signaled Interrupts in the imx6-pcie driver. Signed-off-by:
Harro Haan <hrhaan@gmail.com> Signed-off-by:
Juergen Beisert <jbe@pengutronix.de> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Richard Zhu <r65037@freescale.com>
-
Lucas Stach authored
On i.MX6 the host controller MSI IRQ is shared with PCI legacy INTD. Make sure we don't bail too early from the IRQ handler. The issue is fairly theoretical as it would require a system setup with a PCIe switch where one connected device is using legacy INTD and another one using MSI, but better fix it now. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Acked-by:
-
Lucas Stach authored
They are dropped with the new binding. Signed-off-by:
-
Lucas Stach authored
We don't need this anymore. The IRQs are now properly mapped through the DT. Signed-off-by:
-
Lucas Stach authored
As defined in the new binding. Signed-off-by:
-
Yinghai Lu authored
Assign PCI resources before pci_bus_add_device(). The resources must be assigned before a driver can claim the device. [bhelgaas: changelog] Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Murali Karicheri authored
Call pcie_bus_configure_settings() on ARM, like for other platforms. pcie_bus_configure_settings() makes sure the MPS across the bus is uniform and provides the ability to tune the MRSS and MPS to higher performance values. This is particularly important for embedded where there is no firmware to program these PCIe settings for the OS. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Sachin Kamat authored
imx6_add_pcie_port() is called only from from imx6_pcie_probe() which is annotated with __init. Thus it makes sense to annotate imx6_add_pcie_port() with __init to avoid section mismatch warnings. [bhelgaas: changelog] Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Yijing Wang authored
pci_bus_add_device() always returns 0, so there's no point in returning anything at all. Make it a void function and remove the tests of the return value from the callers. [bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()] Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
-
- 29 May, 2014 1 commit
-
-
Sachin Kamat authored
add_pcie_port() is called only from exynos_pcie_probe(), which is annotated with __init. Thus it makes sense to annotate add_pcie_port() with __init to avoid the following section mismatch warning: WARNING: drivers/pci/built-in.o(.text.unlikely+0xf8): Section mismatch in reference from the function add_pcie_port() to the function .init.text:dw_pcie_host_init() The function add_pcie_port() references the function __init dw_pcie_host_init(). This is often because add_pcie_port lacks a __init annotation or the annotation of dw_pcie_host_init is wrong. [bhelgaas: changelog] Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
- 28 May, 2014 16 commits
-
-
Bjorn Helgaas authored
* pci/misc: PCI: Fix return value from pci_user_{read,write}_config_*() PCI: Turn pcibios_penalize_isa_irq() into a weak function PCI: Test for std config alias when testing extended config space -
Bjorn Helgaas authored
* pci/hotplug: PCI: cpqphp: Fix possible null pointer dereference NVMe: Implement PCIe reset notification callback PCI: Notify driver before and after device reset * pci/pci_is_bridge: pcmcia: Use pci_is_bridge() to simplify code PCI: pciehp: Use pci_is_bridge() to simplify code PCI: acpiphp: Use pci_is_bridge() to simplify code PCI: cpcihp: Use pci_is_bridge() to simplify code PCI: shpchp: Use pci_is_bridge() to simplify code PCI: rpaphp: Use pci_is_bridge() to simplify code sparc/PCI: Use pci_is_bridge() to simplify code powerpc/PCI: Use pci_is_bridge() to simplify code ia64/PCI: Use pci_is_bridge() to simplify code x86/PCI: Use pci_is_bridge() to simplify code PCI: Use pci_is_bridge() to simplify code PCI: Add new pci_is_bridge() interface PCI: Rename pci_is_bridge() to pci_has_subordinate() * pci/virtualization: PCI: Introduce new device binding path using pci_dev.driver_override Conflicts: drivers/pci/pci-sysfs.c
-
Bjorn Helgaas authored
* pci/host-exynos: PCI: exynos: Remove unnecessary OOM messages * pci/host-rcar: PCI: rcar: Add gen2 device tree support PCI: rcar: Add R-Car PCIe device tree bindings PCI: rcar: Add MSI support for PCIe PCI: rcar: Add Renesas R-Car PCIe driver PCI: rcar: Use new OF interrupt mapping when possible * pci/amd-numa: x86/PCI: Clean up and mark early_root_info_init() as deprecated x86/PCI: Work around AMD Fam15h BIOSes that fail to provide _PXM x86/PCI: Warn if we have to "guess" host bridge node information
-
Alex Williamson authored
The driver_override field allows us to specify the driver for a device rather than relying on the driver to provide a positive match of the device. This shortcuts the existing process of looking up the vendor and device ID, adding them to the driver new_id, binding the device, then removing the ID, but it also provides a couple advantages. First, the above existing process allows the driver to bind to any device matching the new_id for the window where it's enabled. This is often not desired, such as the case of trying to bind a single device to a meta driver like pci-stub or vfio-pci. Using driver_override we can do this deterministically using: echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind echo 0000:03:00.0 > /sys/bus/pci/drivers_probe Previously we could not invoke drivers_probe after adding a device to new_id for a driver as we get non-deterministic behavior whether the driver we intend or the standard driver will claim the device. Now it becomes a deterministic process, only the driver matching driver_override will probe the device. To return the device to the standard driver, we simply clear the driver_override and reprobe the device: echo > /sys/bus/pci/devices/0000:03:00.0/driver_override echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind echo 0000:03:00.0 > /sys/bus/pci/drivers_probe Another advantage to this approach is that we can specify a driver override to force a specific binding or prevent any binding. For instance when an IOMMU group is exposed to userspace through VFIO we require that all devices within that group are owned by VFIO. However, devices can be hot-added into an IOMMU group, in which case we want to prevent the device from binding to any driver (override driver = "none") or perhaps have it automatically bind to vfio-pci. With driver_override it's a simple matter for this field to be set internally when the device is first discovered to prevent driver matches. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Alexander Graf <agraf@suse.de> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Williamson authored
The quirk is intended to be extremely generic, but we only apply it to known offending devices. Link: https://bugzilla.kernel.org/show_bug.cgi?id=44881Signed-off-by:
-
Alex Williamson authored
Several PCIe-to-PCI bridges fail to provide a PCIe capability, causing us to handle them as conventional PCI devices when they really use the requester ID of the secondary bus. We need to differentiate these from PCIe-to-PCI bridges that actually use the conventional PCI ID when a PCIe capability is not present, such as those found on the root complex of may Intel chipsets. Add a dev_flag bit to identify devices to be handled as standard PCIe-to-PCI bridges. Signed-off-by:
-
Alex Williamson authored
Several Marvell devices and a JMicron device have a similar DMA requester ID problem to Ricoh, except they use function 1 as the PCIe requester ID. Add a quirk for these to populate the DMA alias with the correct devfn. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679Tested-by:
George Spelvin <linux@horizon.com> Tested-by:
Andreas Schrägle <ajs124.ajs124@gmail.com> Tested-by:
Tobias N <qemu@suppser.de> Tested-by: <daxcore@online.de> Signed-off-by:
-
Alex Williamson authored
The existing quirk for these devices (pci_get_dma_source()) doesn't really solve the problem; re-implement it using the DMA alias iterator. We'll come back later and remove the existing quirk and dma_source interface. Note that device ID 0xe822 is typically function 0 and 0xe230 has been tested to not need the quirk and are therefore removed versus the equivalent dma_source quirk. If there exist in other configurations we can re-add them. Link: https://bugzilla.redhat.com/show_bug.cgi?id=605888Tested-by:
Pat Erley <pat-lkml@erley.org> Signed-off-by:
-
Alex Williamson authored
Some devices are broken and use a requester ID other than their physical devfn. Add a byte, using an existing gap in the pci_dev structure, to store an alternate "alias" devfn. A bit in the dev_flags tells us when this is valid. We then add the alias as one more step in the pci_for_each_dma_alias() iterator. Tested-by:
-
Alex Williamson authored
Convert the pci_dev_flags definitions from decimal constants to bit shifts. We're only a few entries away from where using the decimal value becomes cumbersome. No functional change. Tested-by:
-
Alex Williamson authored
In a mixed PCI/PCI-X/PCIe topology, bridges can take ownership of transactions, replacing the original requester ID with their own. Sometimes we just want to know the resulting device or resulting alias; other times we want each step in the chain. This iterator allows either usage. When an endpoint is connected via an unbroken chain of PCIe switches and root ports, it has no alias and its requester ID is visible to the root bus. When PCI/X get in the way, we pick up aliases for bridges. The reason why we potentially care about each step in the path is because of PCI-X. PCI-X has the concept of a requester ID, but bridges may or may not take ownership of various types of transactions. We therefore leave it to the consumer of this function to prune out what they don't care about rather than attempt to flatten the alias ourselves. Tested-by:
-
Ben Dooks authored
Add device tree probing support to the 'pci-rcar-gen2' driver. [Sergei: numerous fixes/cleanups/additions] [bhelgaas: whitespace fix] Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Acked-by:
Arnd Bergmann <arnd@arndb.de>
-
Rickard Strandqvist authored
There is otherwise a risk of a null pointer dereference. Found by cppcheck, a static code analysis program. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Phil Edworthy authored
This patch adds the bindings for the R-Car PCIe driver. The driver resides under drivers/pci/host/pcie-rcar.c Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
Phil Edworthy authored
Add MSI support to the R-Car PCIe driver. Signed-off-by:
-
Phil Edworthy authored
This PCIe Host driver currently does not support MSI, so cards fall back to INTx interrupts. Signed-off-by:
-
- 27 May, 2014 9 commits
-
-
Gavin Shan authored
The PCI user-space config accessors pci_user_{read,write}_config_*() return negative error numbers, which were introduced by commit 34e32072 ("PCI: handle positive error codes"). That patch converted all positive error numbers from platform-specific PCI config accessors to -EINVAL, which means the callers don't know anything about the specific cause of the failure. The patch fixes the issue by converting the positive PCIBIOS_* error values to generic negative error numbers with pcibios_err_to_errno(). [bhelgaas: changelog] Signed-off-by:Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Greg Thelen <gthelen@google.com>
-
Jingoo Han authored
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by:
-
Hanjun Guo authored
pcibios_penalize_isa_irq() is only implemented by x86 now, and legacy ISA is not used by some architectures. Make pcibios_penalize_isa_irq() a __weak function to simplify the code. This removes the need for new platforms to add stub implementations of pcibios_penalize_isa_irq(). [bhelgaas: changelog, comments] Signed-off-by:
Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by:
-
Alex Williamson authored
When a PCI-to-PCIe bridge is stacked on a PCIe-to-PCI bridge, we can have PCIe endpoints masked by a conventional PCI bus. This makes the extended config space of the PCIe endpoint inaccessible. The PCIe-to-PCI bridge is supposed to handle any type 1 configuration transactions where the extended config offset bits are non-zero as an Unsupported Request rather than forward it to the secondary interface. As noted here, there are a couple known offenders to this rule. These bridges drop the extended offset bits, resulting in the conventional config space being aliased many times across the extended config space. For Intel NICs, this alias often seems to expose a bogus SR-IOV cap. Stacking bridges may seem like an uncommon scenario, but note that any conventional PCI slot in a modern PC is already the secondary interface of an onboard PCIe-to-PCI bridge. The user need only add a PCI-to-PCIe adapter and PCIe device to encounter this problem. Signed-off-by:
-
Yijing Wang authored
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c PCI: Add new pci_is_bridge() interface Signed-off-by:
-
Yijing Wang authored
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c PCI: Add new pci_is_bridge() interface Signed-off-by:
-
Yijing Wang authored
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c PCI: Add new pci_is_bridge() interface Signed-off-by:
-
Yijing Wang authored
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c PCI: Add new pci_is_bridge() interface Signed-off-by:
-
Yijing Wang authored
Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cda PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c PCI: Add new pci_is_bridge() interface Signed-off-by:
-
