- 14 Mar, 2018 2 commits
-
-
Christian König authored
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> CC: stable@vger.kernel.org Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by:
-
- 08 Mar, 2018 3 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.16. A bit bigger than I would have liked, but most of that is DC fixes which Harry helped me pull together from the past few weeks. Highlights: - Fix DL DVI with DC - Various RV fixes for DC - Overlay fixes for DC - Fix HDMI2 handling on boards without HBR tables in the vbios - Fix crash with pass-through on SI on amdgpu - Fix RB harvesting on KV - Fix hibernation failures on UVD with certain cards * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amd/display: validate plane format on primary plane drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amd/display: early return if not in vga mode in disable_vga drm/amd/display: Fix takover from VGA mode drm/amd/display: Fix memleaks when atomic check fails. drm/amd/display: Return success when enabling interrupt drm/amd/display: Use crtc enable/disable_vblank hooks drm/amd/display: update infoframe after dig fe is turned on drm/amd/display: fix boot-up on vega10 drm/amd/display: fix cursor related Pstate hang drm/amd/display: Set irq state only on existing crtcs drm/amd/display: Fixed non-native modes not lighting up drm/amd/display: Call update_stream_signal directly from amdgpu_dm drm/amd/display: Make create_stream_for_sink more consistent drm/amd/display: Don't block dual-link DVI modes drm/amd/display: Don't allow dual-link DVI on all ASICs. drm/amd/display: Pass signal directly to enable_tmds_output drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink drm/amd/display: Move MAX_TMDS_CLOCK define to header ...
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
sun4i fixes on clk, division by zero and LVDS. * tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc: drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off drm/sun4i: rgb: Fix potential division by zero drm/sun4i: tcon: Reduce the scope of the LVDS error a bit drm/sun4i: Release exclusive clock lock when disabling TCON drm/sun4i: Fix dclk_set_phase
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - 2 fixes: 1 for perf and 1 execlist submission race. * tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Suspend submission tasklets around wedging drm/i915/perf: fix perf stream opening lock
-
- 07 Mar, 2018 32 commits
-
-
Shirish S authored
In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Signed-off-by:
-
James Zhu authored
When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021Signed-off-by:
James Zhu <James.Zhu@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
James Zhu authored
Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by:
-
Eric Yang authored
The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Bhawanpreet Lakha authored
HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by:
-
Leo (Sunpeng) Li authored
While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by:
Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by:
-
Harry Wentland authored
Signed-off-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Harry Wentland authored
Signed-off-by:
-
Eric Yang authored
Before dig fe is enabled, infoframe can't be programmed. So in suspend resume case our infoframe programmming was not going through. This change changes the sequence so that infoframe is programmed after. Signed-off-by:
-
Roman Li authored
Fixing null-deref on Vega10 due to regression after 'fix cursor related Pstate hang' change. Added null checks in setting cursor position. Signed-off-by:
-
Eric Yang authored
Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK If graphics plane go from 1 pipe to hsplit, the cursor updates after mpc programming and unlock. Which means there is a window of time where cursor is enabled on the wrong pipe if it's on the right side of the screen (i.e. case where cursor need to move from pipe 0 to pipe 3 post split). This will cause pstate hang. Solution is to program the cursor while still locked. Signed-off-by:
-
Mikita Lipski authored
Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed the wrong memory location. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
-
Jerry (Fangzhi) Zuo authored
There is no need to call drm_mode_set_crtcinfo() again once crtc timing is decided. Otherwise non-native/unsupported timing might get overwritten. Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Harry Wentland authored
There's no good place in DC to cover all place where stream signal should be updated. update_stream_signal depends on timing which comes from DM. Signed-off-by:
-
Harry Wentland authored
We've got a helper function to call dc_create_stream_for_sink and one other place that calls it directly. Make sure we call the helper functions always since we need to update a bunch of things in stream and don't want to miss that. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Harry Wentland authored
Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by:
-
Harry Wentland authored
This makes the check for HDMI and dual-link DVI a bit more straightforward. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Roman Li authored
With FBC enabled there was a potential null-deref on topology change due to hardcorded pipe index. Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
When topology changed and rehook up MST display to the same DP connector, need to take care of drm_dp_mst_port object. Due to the topology is changed, drm_dp_mst_port and corresponding i2c_algorithm object could be NULL in such situation. Signed-off-by:
-
Shirish S authored
The below commit "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2" introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, it now preserves it. This change leads to BUG hit while performing atomic commit on amd driver. As a fix this patch ensures that we disable the CRTC's with NULL FB by returning -EINVAL and hence triggering fall back to the old behavior and turning off the crtc in atomic_remove_fb(). V2: Added error check for plane_state and removed sanity check for crtc. Signed-off-by:
Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by:
-
Michel Dänzer authored
For consistency with other DCE generations. HPD IRQs appear to be working fine. Reviewed-by:
-
Harry Wentland authored
There have been many reports of Ellesmere and Baffin systems not being able to drive HDMI 4k60 due to the fact that we check the HDMI_6GB_EN bit from VBIOS table. Windows seems to not have this issue. On some systems we fail to the encoder cap info from VBIOS. In that case we should default to enabling HDMI6G support. This was tested by dwagner on https://bugs.freedesktop.org/show_bug.cgi?id=102820Signed-off-by:
-
Shirish S authored
This patch updates the dc's plane state with the parameters set by the user side. This is needed to validate the plane capabilities with the parameters user space wants to set. Signed-off-by:
-
Shirish S authored
CZ & ST support uptil a limit 2:1 downscaling, this patch adds validate_plane hook, that shall be used to validate the plane attributes sent by the user space based on dce110 capabilities. Signed-off-by:
-
Shirish S authored
amdgpu_dm_atomic_check() is used to validate the entire configuration of planes and crtc's that the user space wants to commit. However amdgpu_dm_atomic_check() depends upon DRM_MODE_ATOMIC_ALLOW_MODESET flag else its mostly dummy. Its not mandatory for the user space to set DRM_MODE_ATOMIC_ALLOW_MODESET, and in general its not set either along with DRM_MODE_ATOMIC_TEST_ONLY. Considering its importantance, this patch defers the allow_modeset check in dm_update_planes_state(), so that there shall be scope to validate the configuration sent from user space, without impacting the population of dc/dm related data structures. Signed-off-by:
-
Harry Wentland authored
Signed-off-by:
-
Rex Zhu authored
it is required if a platform supports PCIe root complex core voltage reduction. After receiving this notification, SBIOS can apply default PCIe root complex power policy. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Alex Deucher authored
Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353Reviewed-by:
-
Alex Deucher authored
Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353Reviewed-by:
-
- 06 Mar, 2018 3 commits
-
-
Maxime Ripard authored
Make sure that the CRTC code will call the enable/disable_vblank hooks. Otherwise, since the refcounting will be off, we might end up in a situation where the vblank management functions are called while the CRTC is off. Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
-
Maxime Ripard authored
In the case where mode_valid callback of our RGB connector was called before mode_set was being called, the range of dividers would not be set, resulting in a division by zero later on in the clk_round_rate logic. Set the range of dividers before calling clk_round_rate to fix this. Reviewed-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by:
-
Maxime Ripard authored
The current logic to deal with old DT missing the LVDS properties doesn't take into account whether the LVDS output is supported in the first place, resulting in spurious error messages on SoCs where it doesn't even matter. Introduce a new TCON flag to list if LVDS is supported at all to prevent this from happening. Reviewed-by:
-
