- 16 Dec, 2019 28 commits
-
-
Ezequiel Garcia authored
It has been decided to use the ENUM_FMT index value as a hint for driver preference. This is defined purposedly in a very liberal way, letting drivers define what "preference" means. For instance, the Hantro VPU driver indicates additional processing to output a given format, and thus implicates more CPU usage, which is enumerated after native (non-processed) formats. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dragos Bogdan authored
The AD7611 chip supports the same Deep Color Mode settings as the AD7604. This change extends support for this feature to the AD7611 by adding a wrapper function for the `read_hdmi_pixelclock` hook and adding the same frequency adjustment logic. Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Guilherme Alcarde Gallo authored
Add support for the sink pad of scaler subdevice to respond VIDIOC_G_SELECTION and VIDIOC_S_SELECTION ioctls with the following targets: V4L2_SEL_TGT_COMPOSE_BOUNDS and V4L2_SEL_TGT_CROP. * Add new const struct crop_rect_default to initialize subdev scaler properly. * Make changes in sink pad format reflect to the crop rectangle. E.g. changing the frame format to a smaller size one can make the former crop rectangle selects a non existing frame area. To solve this situation the crop rectangle is clamped to the frame boundaries. * Clamp crop rectangle respecting the sink bounds during set_selection ioctl. Co-developed-by:
Danilo Figueiredo Rocha <drocha.figueiredo@gmail.com> Signed-off-by:
Guilherme Alcarde Gallo <gagallo7@gmail.com> Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Hans Verkuil authored
Testing with the rmi_f54 driver on the Lenovo X1 Carbon 6th gen laptop showed that the data is in little endian format. Update the documentation accordingly. Signed-off-by:
-
Rui Miguel Silva authored
It was defined a notifier in the csi_state structure that is never allocated. And besides that it's unregister in the remove, even though it is a no-op, just remove both. Fixes: 7807063b ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Suggested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Hirokazu Honda authored
MediaTek encoder allocates non pixel data area for an input buffer every plane. As the input buffer should be read-only, the driver should not write anything in the buffer. Therefore, the extra data should be unnecessary. Signed-off-by:
Hirokazu Honda <hiroh@chromium.org> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Niklas Söderlund authored
When adding the compatibility string for R8A77470 (RZ/G1C) to the rcar-vin driver the string was never documented in the bindings, add it now. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Niklas Söderlund authored
It might be convenient to have aliases but it's not required, drop the sentence as it's not true and not used in Gen3 DTS files. Signed-off-by:
-
Eugen Hristev authored
When requesting format from sensor, some sensors call the subdev_get_try_crop which for ISI was not properly initialized, and this causes errors in determining proper image resolutions. To accommodate for this, when trying a format (in try_fmt), first attempt to obtain the framesize for this format from sensor. In case this fails, use the maximum ISI width/height as try_crop, otherwise provide the first size height/width from the sensor. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
In try_fmt, properly initialize the pad_cfg variable to zeros. This can be used by various calls from the subdev, so it's better to have it initialized. Signed-off-by:
-
Eugen Hristev authored
This adds support for GREY and Y16 formats, based on Y10 mbus codes. Y16 needs to go through preview path in the ISI, with 2 pixels per word, and it fits the Y16 format. The ISI data lines need to be MSB aligned with the sensor data lines. GREY format in 8 bits per pixel is done by dropping the 2 LSB bits from the Y10 format, and packed as 4 pixels per word. Suggested-by:
Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by:
-
Eugen Hristev authored
When requesting format from sensor, some sensors call the subdev_get_try_crop which for ISC was not properly initialized, and this causes errors in determining proper image resolutions. To accommodate for this, when trying a format (in try_fmt), first attempt to obtain the framesize for this format from sensor. In case this fails, use the maximum ISC width/height as try_crop, otherwise provide the first size height/width from the sensor. Signed-off-by:
-
Eugen Hristev authored
With some sensors, the mbus code must match the one that sensor supports. In this case we should initialize the mbus_code of the fse/fie before calling the subdev, and not after. Signed-off-by:
-
Eugen Hristev authored
In try_fmt, properly initialize the pad_cfg variable to zeros. This can be used by various calls from the subdev, so it's better to have it initialized. Signed-off-by:
-
Eugen Hristev authored
The ISC can receive input from sensors using Y10 format directly (10 bits greyscale). In this case, the ISC must dump the data directly, either as GREY (8bit) or Y10 (10bit). Y16 is not supported because we cannot align the MSB 10 bits to the MSB inside the 16bit container. For this format, the ISC internal pipeline cannot work (only works with BAYER), so we must dump the data directly as 8bit/10bit. Signed-off-by:
-
Eugen Hristev authored
In case the format that the sensor sends is 8 bit only (like GREY for example) we need to be able to bypass ISC pipeline and directly dump 8 bits. That's why the hardcoded value of 16 bpp is not correct in all cases. This change allows the output format to decide what is the correct bpp (bits per pixel) such that the result is in the proper format. Signed-off-by:
-
Neil Armstrong authored
Add support for the Amlogic SM1 platform for the current MPEG1 & MPEG2 support. The SM1 family, very close to the G12A SoCs, has a slighly different power management control, thus needing a separate compatible and family id. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
Add bindings to support the Amlogic Video Decoder on the Amlogic SM1 family. SM1 has a slightly different power management handling, thus needing a separate compatible. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxime Jourdan authored
Add support for the G12A platform by: - adding the G12A codec support, here MPEG1 & MPEG2 - getting the new hevcf clock for the upcoming HEVC/VP9 decoding support Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
Add bindings to support the Amlogic Video Decoder on the Amlogic G12A family. For the G12A family, a supplementary clock is needed to operate the HEVC/VP9 decoder. Signed-off-by:
-
Neil Armstrong authored
Now that we have the DT validation in place, let's convert the device tree bindings for the Amlogic Video Controller over to YAML schemas. This yaml bindings will then be extended to support new SoCs. Signed-off-by:
-
Philipp Zabel authored
When decoding using the CODA internal rotator (for example NV12 capture), currently the value vb2_buf.index + CODA_MAX_FRAMEBUFFERS (19) is written into the DEC_PIC_ROT_INDEX register. At least with firmware version 3.1.1 this causes CODA hangups as soon as the register value reaches 32. Instead, always write CODA_MAX_FRAMEBUFFERS. Signed-off-by:
-
Philipp Zabel authored
Both platform_get_irq_byname() and platform_get_irq() already print an error. Remove the redundant error message. Signed-off-by:
-
Philipp Zabel authored
This patch adds JPEG encoding support for CODA960, handling the JPEG hardware directly. A separate JPEG encoder video device is created due to the separate hardware unit and different supported pixel formats. While the hardware can not change subsampling on the fly, it can encode 4:2:2 subsampled images into JPEGs of the same subsampling. There are two additional tracepoints added to the coda driver that can be used together with the v4l2:v4l2_qbuf and v4l2:v4l2_dqbuf tracepoints to to follow video frames through the mem2mem device when encoding or decoding with the CODA960 JPEG codec: coda:coda_jpeg_run coda:coda_jpeg_done Signed-off-by:Richard Leitner <richard.leitner@skidata.com> [hverkuil-cisco@xs4all.nl: removed unused k and q_data_dst variables] Signed-off-by:
-
Philipp Zabel authored
The CODA960 JPEG codec is controlled directly from the host, there is no support in the BIT processor firmware. This patch adds the necessary register definitions. Signed-off-by:
-
Philipp Zabel authored
The Huffman bits tables are always 16 bytes long, and they are always followed directly by the values tables, both in hardware and in JPEG files. Just merge the two tables. Signed-off-by:
-
Philipp Zabel authored
Always call finish_run when the hardware signals completion. This will allow JPEG contexts to clean up even if job_abort was called during the device_run. Signed-off-by:
-
- 13 Dec, 2019 12 commits
-
-
Takashi Iwai authored
PCM core deals the empty ioctl field now as default. Let's kill the redundant lines. Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com> Cc: Anton Sviridenko <anton@corp.bluecherry.net> Cc: Andrey Utkin <andrey.utkin@corp.bluecherry.net> Cc: Ismael Luceno <ismael@iodev.co.uk> Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
snd_ivtv_pcm_ioctl() does nothing but calling the default handler. Now PCM core accepts NULL as the default ioctl ops, so let's drop altogether. Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Takashi Iwai authored
snd_cx18_pcm_ioctl() does nothing but calling the default handler. Now PCM core accepts NULL as the default ioctl ops, so let's drop altogether. Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Takashi Iwai authored
snd_cobalt_pcm_ioctl() does nothing but calling the default handler. Now PCM core accepts NULL as the default ioctl ops, so let's drop altogether. Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Also, snd_tm6000_capture_free() is dropped since the check of stream_started flag makes no sense; hw_free callback is guaranteed to be called after the stream gets stopped. Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Also, snd_em28xx_hw_capture_free() is dropped since the check of stream_started flag makes no sense; hw_free callback is guaranteed to be called after the stream gets stopped. Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Also, snd_cx231xx_hw_capture_free() is dropped since the check of stream_started flag makes no sense; hw_free callback is guaranteed to be called after the stream gets stopped. Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Cc: Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Takashi Iwai authored
With the recent change in ALSA PCM core, the whole open-coded vmalloc buffer handling in this driver can be dropped by replacing with the managed buffer allocation. Signed-off-by:
-
Takashi Iwai authored
Clean up the driver with the new managed buffer allocation API. The hw_params and hw_free callbacks became superfluous and dropped. Signed-off-by:
-
