- 24 Sep, 2010 10 commits
-
-
Ming Lei authored
DMA length should not go beyond the availabe space of request buffer, so fix it. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Ming Lei authored
This patch fixes one bugs of OUT transfer in double buffer case: -the current code only enable autoclear for dma mode 1, and not for dma mode 0 Without this patch, test #5 of usbtest can't be passed if we configure musb as g_zero and use fifo mode 3 to enable double buffer mode. With this patch and the following patch(fix dma length), on my beagle B5, test#5(queued bulk out) may go beyond 18Mbyte/s(seems dma mode 0 is quicker in double buffer case) if musb is configured as g_zero and fifo mode 3 is taken, follows the test command: #./testusb -D DEV_NAME -c 1024 -t 5 -s 32768 -g 8 [1] Also I have tested this patch can't make g_ether broken. [1],source of testusb : tools/usb/testusb.c under linux kernel; Signed-off-by: -
Ming Lei authored
This patch fixes one infinite hang of bulk IN transfer in double buffer case, the hang can be observed easily by test #6 of usbtest if musb is configured as g_zero and fifo mode 3 is taken to enable double fifo. In fact, the patch only removes the check for non-empty fifo before loading data from new request into fifo since the check is not correct: -in double buffer case, fifo may accommodate more than one packet, even though it has contained one packet already and is non-empty -since last DMA is completed before calling musb_g_tx, it is sure that fifo may accommodate at least one packet Without applying the patch, new requst enqueued from .complte may not have a chance to be loaded into fifo, then will never be completed and cause infinite hangs. With the patch, on my beagle B5, test#6(queued bulk in) can be passed and test result may go beyond 33Mbyte/s if musb is configured as g_zero and fifo mode 3 is taken, follows the test command: #testusb -D DEV_NAME -c 1024 -t 6 -s 32768 -g 8 [1] [1], -source of testusb : tools/usb/testusb.c under linux kernel; Signed-off-by: -
Ming Lei authored
For shared fifo hw endpoint(with FIFO_TXRX style), only ep_in field of musb_hw_ep is intialized in musb_g_init_endpoints, and ep_out is not initialized, but musb_g_rx and rxstate may access ep_out field of musb_hw_ep by the method below: musb_ep = &musb->endpoints[epnum].ep_out which can cause the kernel panic[1] below, this patch fixes the issue by getting 'musb_ep' from '&musb->endpoints[epnum].ep_in' for shared fifo endpoint. [1], kernel panic [root@OMAP3EVM /]# musb_interrupt 1583: ** IRQ peripheral usb0008 tx0000 rx4000 musb_stage0_irq 460: <== Power=f0, DevCtl=99, int_usb=0x8 musb_g_rx 772: <== (null), rxcsr 4007 ffffffe8 musb_g_rx 786: iso overrun on ffffffe8 Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT last sysfs file: /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1/dev Modules linked in: g_zero CPU: 0 Tainted: G W (2.6.35-rc6-gkh-wl+ #92) PC is at musb_g_rx+0xfc/0x2ec LR is at vprintk+0x3f4/0x458 pc : [<c02c07a4>] lr : [<c006ccb0>] psr: 20000193 sp : c760bd78 ip : c03c9d70 fp : c760bdbc r10: 00000000 r9 : fa0ab1e0 r8 : 0000000e r7 : c7e80158 r6 : ffffffe8 r5 : 00000001 r4 : 00004003 r3 : 00010003 r2 : c760bcd8 r1 : c03cd030 r0 : 0000002e Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8778c019 DAC: 00000017 Process kmemleak (pid: 421, stack limit = 0xc760a2e8) Stack: (0xc760bd78 to 0xc760c000) bd60: ffffffe8 c04b1b58 bd80: ffffffe8 c7c01ac0 00000000 c7e80d24 c0084238 00000001 00000001 c7e80158 bda0: 0000000e 00000008 00000099 000000f0 c760be04 c760bdc0 c02bcd68 c02c06b4 bdc0: 00000099 00000008 00004000 c760bdd8 c03cc4f8 00000000 00000002 c7e80158 bde0: c7d2e300 60000193 c760a000 0000005c 00000000 00000000 c760be24 c760be08 be00: c02bcecc c02bc1ac c7d2e300 c7d2e300 0000005c c760a000 c760be54 c760be28 be20: c00ad698 c02bce6c 00000000 c7d2e300 c067c258 0000005c c067c294 00000001 be40: c760a000 00000000 c760be74 c760be58 c00af984 c00ad5fc 0000005c 00000000 be60: 00000000 00000002 c760be8c c760be78 c0039080 c00af8d0 ffffffff fa200000 be80: c760beec c760be90 c0039b6c c003900c 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff 00000000 c068bae8 bee0: c760bf24 c760bef0 c00ff7d0 c0064ec4 00000001 00000000 c00ff700 00000000 bf00: c0087f00 00000000 60000013 c0d76a70 c0e23795 00000001 c760bf4c c760bf28 bf20: c00ffdd8 c00ff70c c068bb08 c068bae8 60000013 c0100938 c068bb30 00000000 bf40: c760bf84 c760bf50 c010014c c00ffd84 00000001 00000000 c010000c 00012c00 bf60: c7c33f04 00012c00 c7c33f04 00000000 c0100938 00000000 c760bf9c c760bf88 bf80: c01009a8 c0100018 c760bfa8 c7c33f04 c760bff4 c760bfa0 c0088000 c0100944 bfa0: c760bf98 00000000 00000000 00000001 dead4ead ffffffff ffffffff c08ba2bc bfc0: 00000000 c049e7fa 00000000 c0087f70 c760bfd0 c760bfd0 c7c33f04 c0087f70 bfe0: c006f5e8 00000013 00000000 c760bff8 c006f5e8 c0087f7c 7f0004ff df2000ff Backtrace: [<c02c06a8>] (musb_g_rx+0x0/0x2ec) from [<c02bcd68>] (musb_interrupt+0xbc8/0xcc0) [<c02bc1a0>] (musb_interrupt+0x0/0xcc0) from [<c02bcecc>] (generic_interrupt+0x6c/0x84) [<c02bce60>] (generic_interrupt+0x0/0x84) from [<c00ad698>] (handle_IRQ_event+0xa8/0x1ec) r7:c760a000 r6:0000005c r5:c7d2e300 r4:c7d2e300 [<c00ad5f0>] (handle_IRQ_event+0x0/0x1ec) from [<c00af984>] (handle_level_irq+0xc0/0x13c) [<c00af8c4>] (handle_level_irq+0x0/0x13c) from [<c0039080>] (asm_do_IRQ+0x80/0xa0) r7:00000002 r6:00000000 r5:00000000 r4:0000005c [<c0039000>] (asm_do_IRQ+0x0/0xa0) from [<c0039b6c>] (__irq_svc+0x4c/0xb4) Exception stack(0xc760be90 to 0xc760bed8) be80: 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff r5:fa200000 r4:ffffffff [<c0064eb8>] (sub_preempt_count+0x0/0x100) from [<c00ff7d0>] (find_and_get_object+0xd0/0x110) r5:c068bae8 r4:00000000 [<c00ff700>] (find_and_get_object+0x0/0x110) from [<c00ffdd8>] (scan_block+0x60/0x104) r8:00000001 r7:c0e23795 r6:c0d76a70 r5:60000013 r4:00000000 [<c00ffd78>] (scan_block+0x0/0x104) from [<c010014c>] (kmemleak_scan+0x140/0x484) [<c010000c>] (kmemleak_scan+0x0/0x484) from [<c01009a8>] (kmemleak_scan_thread+0x70/0xcc) r8:00000000 r7:c0100938 r6:00000000 r5:c7c33f04 r4:00012c00 [<c0100938>] (kmemleak_scan_thread+0x0/0xcc) from [<c0088000>] (kthread+0x90/0x98) r5:c7c33f04 r4:c760bfa8 [<c0087f70>] (kthread+0x0/0x98) from [<c006f5e8>] (do_exit+0x0/0x684) r7:00000013 r6:c006f5e8 r5:c0087f70 r4:c7c33f04 Code: e3002312 e58d6000 e2833e16 eb0422d5 (e5963020) ---[ end trace f3d5e96f75c297b7 ]--- Signed-off-by:
Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
Recent changes in the usbhid layer exposed a bug in usbcore. If CONFIG_USB_DYNAMIC_MINORS is enabled then an interface may be assigned a minor number of 0. However interfaces that aren't registered as USB class devices also have their minor number set to 0, during initialization. As a result usb_find_interface() may return the wrong interface, leading to a crash. This patch (as1418) fixes the problem by initializing every interface's minor number to -1. It also cleans up the usb_register_dev() function, which besides being somewhat awkwardly written, does not unwind completely on all its error paths. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Philip J. Turmel <philip@turmel.org> Tested-by:
Gabriel Craciunescu <nix.or.die@googlemail.com> Tested-by:
Alex Riesen <raa.lkml@gmail.com> Tested-by:
Matthias Bayer <jackdachef@gmail.com> CC: Jiri Kosina <jkosina@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by:
-
Naoya Horiguchi authored
Confirming page lock is held in hugetlb_add_anon_rmap() may be useful to detect possible future problems. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Naoya Horiguchi authored
The "if (!trylock_page)" block in the avoidcopy path of hugetlb_cow() looks confusing and is buggy. Originally this trylock_page() was intended to make sure that old_page is locked even when old_page != pagecache_page, because then only pagecache_page is locked. This patch fixes it by moving page locking into hugetlb_fault(). Signed-off-by:
-
Naoya Horiguchi authored
Obviously, setting anon_vma for COWed hugepage should be done by hugepage_add_new_anon_rmap() to scan vmas faster. This patch fixes it. Signed-off-by:
-
Naoya Horiguchi authored
This patch applies Andrea's fix given by the following patch into hugepage rmapping code: commit 288468c3 Author: Andrea Arcangeli <aarcange@redhat.com> Date: Mon Aug 9 17:19:09 2010 -0700 This patch uses anon_vma->root and avoids unnecessary overwriting when anon_vma is already set up. Signed-off-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix reboot on Intel hosts KVM: fix irqfd assign/deassign race
-
- 23 Sep, 2010 30 commits
-
-
Linus Torvalds authored
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: thinkpad-acpi: avoid keymap pitfall Change MSI LAPTOP driver maintainer to Lee, Chun-Yi
-
Henrique de Moraes Holschuh authored
Change the code so that it will use the correct size for keymap entries. Do it in a way that makes it harder to screw it up in the future. Reported-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Lee, Chun-Yi authored
Change MSI LAPTOP driver maintainer from Lennart Poettering to Lee, Chun-Yi. MSI is a Taiwan OEM company, Lee, Chun-Yi can more easy to contact with MSI and maintain msi-laptop driver. Thank's for Lennart Poettering's contribute, Lee, Chun-Yi will base on his article to continue maintain the msi-laptop driver. Signed-off-by:
Lee, Chun-Yi <jlee@novell.com> Signed-off-by:
-
Mark Salter authored
Remove specification of HAVE_ARCH_TRACEHOOK for MN10300 as the arch does not support it at this time. Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Mark Salter authored
SIGRTMAX should be _NSIG not _NSIG-1. Signed-off-by:
-
Mark Salter authored
The MN10300 arch ext2 bitops assume a big-endian kernel, but the MN10300 arch only runs in little-endian mode. Reported-by:
Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix pcpu_last_unit_cpu
-
Avi Kivity authored
When we reboot, we disable vmx extensions or otherwise INIT gets blocked. If a task on another cpu hits a vmx instruction, it will fault if vmx is disabled. We trap that to avoid a nasty oops and spin until the reboot completes. Problem is, we sleep with interrupts disabled. This blocks smp_send_stop() from running, and the reboot process halts. Fix by enabling interrupts before spinning. KVM-Stable-Tag. Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
Michael S. Tsirkin authored
I think I see the following (theoretical) race: During irqfd assign, we drop irqfds lock before we schedule inject work. Therefore, deassign running on another CPU could cause shutdown and flush to run before inject, causing user after free in inject. A simple fix it to schedule inject under the lock. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Gregory Haskins <ghaskins@novell.com> Signed-off-by:
-
Yinghai Lu authored
When modprobe.conf has options ipmi_si type="kcs" ports=0xCA2 regspacings="4" ipmi_si can be loaded properly, but when try to unload it get: Sep 20 15:00:27 xx abrt: Kerneloops: Reported 1 kernel oopses to Abrt Sep 20 15:00:27 xx abrtd: Directory 'kerneloops-1285020027-1' creation detected Sep 20 15:00:27 xx abrtd: New crash /var/spool/abrt/kerneloops-1285020027-1, processing Sep 20 15:01:09 xx kernel: ------------[ cut here ]------------ Sep 20 15:01:09 xx kernel: WARNING: at drivers/base/driver.c:262 driver_unregister+0x8a/0xa0() Sep 20 15:01:09 xx kernel: Hardware name: Sun Fire x4800 Sep 20 15:01:09 xx kernel: Unexpected driver unregister! Sep 20 15:01:09 xx kernel: Modules linked in: ipmi_si(-) ipmi_msghandler ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb3i iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun kvm_intel kvm uinput sg ses enclosure ahci libahci pcspkr i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support igb dca i7core_edac edac_core ext3 jbd mbcache sd_mod crc_t10dif megaraid_sas [last unloaded: ipmi_devintf] Sep 20 15:01:09 xx kernel: Pid: 10625, comm: modprobe Tainted: G W 2.6.36-rc5-tip+ #6 Sep 20 15:01:09 xx kernel: Call Trace: Sep 20 15:01:09 xx kernel: [<ffffffff810600df>] warn_slowpath_common+0x7f/0xc0 Sep 20 15:01:09 xx kernel: [<ffffffff810601d6>] warn_slowpath_fmt+0x46/0x50 Sep 20 15:01:09 xx kernel: [<ffffffff812ff60a>] driver_unregister+0x8a/0xa0 Sep 20 15:01:09 xx kernel: [<ffffffff812ae112>] pnp_unregister_driver+0x12/0x20 Sep 20 15:01:09 xx kernel: [<ffffffffa01d0327>] cleanup_ipmi_si+0x3c/0xa7 [ipmi_si] Sep 20 15:01:09 xx kernel: [<ffffffff81099a60>] sys_delete_module+0x1a0/0x270 Sep 20 15:01:09 xx kernel: [<ffffffff814b7070>] ? do_page_fault+0x150/0x320 Sep 20 15:01:09 xx kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Sep 20 15:01:09 xx kernel: ---[ end trace 0d1967161adcee0d ]--- We need to check if ipmi_pnp_driver is loaded before we try to unload it. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Vladimir Zapolskiy authored
This change resolves a problem about unbalanced calls of enable_irq_wakeup() and disable_irq_wakeup() for alarm interrupt. Bug reproduction: root@eb600:~# echo 0 > /sys/class/rtc/rtc0/wakealarm WARNING: at kernel/irq/manage.c:361 set_irq_wake+0x7c/0xe4() Unbalanced IRQ 46 wake disable Modules linked in: [<c0025708>] (unwind_backtrace+0x0/0xd8) from [<c003358c>] (warn_slowpath_common+0x44/0x5c) [<c003358c>] (warn_slowpath_common+0x44/0x5c) from [<c00335dc>] (warn_slowpath_fmt+0x24/0x30) [<c00335dc>] (warn_slowpath_fmt+0x24/0x30) from [<c0058c20>] (set_irq_wake+0x7c/0xe4) [<c0058c20>] (set_irq_wake+0x7c/0xe4) from [<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8) [<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8) from [<c01b47a0>] (rtc_set_alarm+0x60/0x74) [<c01b47a0>] (rtc_set_alarm+0x60/0x74) from [<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8) [<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8) from [<c01891ec>] (dev_attr_store+0x20/0x24) [<c01891ec>] (dev_attr_store+0x20/0x24) from [<c00be934>] (sysfs_write_file+0x104/0x13c) [<c00be934>] (sysfs_write_file+0x104/0x13c) from [<c0080e7c>] (vfs_write+0xb0/0x158) [<c0080e7c>] (vfs_write+0xb0/0x158) from [<c0080fcc>] (sys_write+0x3c/0x68) [<c0080fcc>] (sys_write+0x3c/0x68) from [<c0020ec0>] (ret_fast_syscall+0x0/0x28) Signed-off-by:
Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ben Dooks <ben@fluff.org.uk> Cc: Atul Dahiya <atul.dahiya@samsung.com> Cc: Taekgyun Ko <taeggyun.ko@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: <stable@kernel.org> Signed-off-by:
-
Andrea Arcangeli authored
If __split_vma fails because of an out of memory condition the anon_vma_chain isn't teardown and freed potentially leading to rmap walks accessing freed vma information plus there's a memleak. Signed-off-by:
Johannes Weiner <jweiner@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Andrea Arcangeli authored
The below bug in fork led to the rmap walk finding the parent huge-pmd twice instead of just once, because the anon_vma_chain objects of the child vma still point to the vma->vm_mm of the parent. The patch fixes it by making the rmap walk accurate during fork. It's not a big deal normally but it worth being accurate considering the cost is the same. Signed-off-by:
-
Andrew Morton authored
drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw': drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here Move the offending function (and its siblings) to top-of-file, remove the forward declaration. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441Reported-by:
Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by:
-
David Rientjes authored
/proc/sys/vm/oom_dump_tasks is enabled by default, so it's necessary to limit as much information as possible that it should emit. The tasklist dump should be filtered to only those tasks that are eligible for oom kill. This is already done for memcg ooms, but this patch extends it to both cpuset and mempolicy ooms as well as init. In addition to suppressing irrelevant information, this also reduces confusion since users currently don't know which tasks in the tasklist aren't eligible for kill (such as those attached to cpusets or bound to mempolicies with a disjoint set of mems or nodes, respectively) since that information is not shown. Signed-off-by:
David Rientjes <rientjes@google.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Dan Rosenberg authored
The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "reserved" member of the fb_vblank struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by:
Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: <stable@kernel.org> Signed-off-by:
-
Richard Weinberger authored
This fixes: incompatible pointer type: => 89 arch/um/kernel/exec.c: warning: passing argument 2 of 'execve1' from incompatible pointer type: => 69, 85 arch/um/kernel/exec.c: warning: passing argument 3 of 'execve1' from incompatible pointer type: => 69, 85 which was introduced by d7627467 ("Make do_execve() take a const filename pointer") Signed-off-by:Richard Weinberger <richard@nod.at> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
KOSAKI Motohiro authored
Currently, /proc/<pid>/smaps has wrong dirty pages accounting. Shared_Dirty and Private_Dirty output only pte dirty pages and ignore PG_dirty page flag. It is difference against documentation, but also inconsistent against Referenced field. (Referenced checks both pte and page flags) This patch fixes it. Test program: large-array.c --------------------------------------------------- #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> char array[1*1024*1024*1024L]; int main(void) { memset(array, 1, sizeof(array)); pause(); return 0; } --------------------------------------------------- Test case: 1. run ./large-array 2. cat /proc/`pidof large-array`/smaps 3. swapoff -a 4. cat /proc/`pidof large-array`/smaps again Test result: <before patch> 00601000-40601000 rw-p 00000000 00:00 0 Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 218992 kB <-- showed pages as clean incorrectly Private_Dirty: 829584 kB Referenced: 388364 kB Swap: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB <after patch> 00601000-40601000 rw-p 00000000 00:00 0 Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 1048576 kB <-- fixed Referenced: 388480 kB Swap: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Signed-off-by: -
Jarek Poplawski authored
Fix the lockdep warning: [ 13.657164] INFO: trying to register non-static key. [ 13.657169] the code is fine but needs lockdep annotation. [ 13.657171] turning off the locking correctness validator. [ 13.657177] Pid: 622, comm: modprobe Not tainted 2.6.36-rc3c #8 [ 13.657180] Call Trace: [ 13.657194] [<c13002c8>] ? printk+0x18/0x20 [ 13.657202] [<c1056cf6>] register_lock_class+0x336/0x350 [ 13.657208] [<c1058bf9>] __lock_acquire+0x449/0x1180 [ 13.657215] [<c1059997>] lock_acquire+0x67/0x80 [ 13.657222] [<c1042bf1>] ? __cancel_work_timer+0x51/0x230 [ 13.657227] [<c1042c23>] __cancel_work_timer+0x83/0x230 [ 13.657231] [<c1042bf1>] ? __cancel_work_timer+0x51/0x230 [ 13.657236] [<c10582b2>] ? mark_held_locks+0x62/0x80 [ 13.657243] [<c10b3a2f>] ? kfree+0x7f/0xe0 [ 13.657248] [<c105853c>] ? trace_hardirqs_on_caller+0x11c/0x160 [ 13.657253] [<c105858b>] ? trace_hardirqs_on+0xb/0x10 [ 13.657259] [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0 [ 13.657263] [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0 [ 13.657268] [<c1042dea>] cancel_work_sync+0xa/0x10 [ 13.657272] [<c117f444>] fbcon_deinit+0xe4/0x1e0 ... The warning is caused by trying to cancel an uninitialized work from fbcon_exit(). Fix it by adding a check for queue.func, similarly to other places in this code. Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Luke Macken authored
Enable the EFI framebuffer on 14 more Macs, including the iMac11,1 iMac10,1 iMac8,1 Macmini3,1 Macmini4,1 MacBook5,1 MacBook6,1 MacBook7,1 MacBookPro2,2 MacBookPro5,2 MacBookPro5,3 MacBookPro6,1 MacBookPro6,2 and MacBookPro7,1 Information gathered from various user submissions. https://bugzilla.redhat.com/show_bug.cgi?id=528232 http://ubuntuforums.org/showthread.php?t=1557326 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:Luke Macken <lmacken@redhat.com> Signed-off-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
-
Peter Jones authored
Some Apple machines have identical DMI data but different memory configurations for the video. Given that, check that the address in our table is actually within the range of a PCI BAR on a VGA device in the machine. This also fixes up the return value from set_system(), which has always been wrong, but never resulted in bad behavior since there's only ever been one matching entry in the dmi table. The patch 1) stops people's machines from crashing when we get their display wrong, which seems to be unfortunately inevitable, 2) allows us to support identical dmi data with differing video memory configurations This also adds me as the efifb maintainer, since I've effectively been acting as such for quite some time. Signed-off-by:
-
Jan Kara authored
OCFS2 can return ERESTARTSYS from its write function when the process is signalled while waiting for a cluster lock (and the filesystem is mounted with intr mount option). Generally, it seems reasonable to allow filesystems to return this error code from its IO functions. As we must not leak ERESTARTSYS (and similar error codes) to userspace as a result of an AIO operation, we have to properly convert it to EINTR inside AIO code (restarting the syscall isn't really an option because other AIO could have been already submitted by the same io_submit syscall). Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Zach Brown <zach.brown@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Minchan Kim authored
M. Vefa Bicakci reported 2.6.35 kernel hang up when hibernation on his 32bit 3GB mem machine. (https://bugzilla.kernel.org/show_bug.cgi?id=16771). Also he bisected the regression to commit bb21c7ce Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Date: Fri Jun 4 14:15:05 2010 -0700 vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure At first impression, this seemed very strange because the above commit only chenged function return value and hibernate_preallocate_memory() ignore return value of shrink_all_memory(). But it's related. Now, page allocation from hibernation code may enter infinite loop if the system has highmem. The reasons are that vmscan don't care enough OOM case when oom_killer_disabled. The problem sequence is following as. 1. hibernation 2. oom_disable 3. alloc_pages 4. do_try_to_free_pages if (scanning_global_lru(sc) && !all_unreclaimable) return 1; If kswapd is not freozen, it would set zone->all_unreclaimable to 1 and then shrink_zones maybe return true(ie, all_unreclaimable is true). So at last, alloc_pages could go to _nopage_. If it is, it should have no problem. This patch adds all_unreclaimable check to protect in direct reclaim path, too. It can care of hibernation OOM case and help bailout all_unreclaimable case slightly. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Reported-by:
M. Vefa Bicakci <bicave@superonline.com> Reported-by: <caiqian@redhat.com> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Tested-by: <caiqian@redhat.com> Acked-by:
Rafael J. Wysocki <rjw@sisk.pl> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
Axel Lin authored
Otherwise, calling platform_get_drvdata() in ab3100_rtc_remove() returns NULL. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Wan ZongShun <mcuos.com@gmail.com> Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Hans-Christian Egtvedt authored
Alter the maintainer of the AVR32 architecture and the AVR32/AT32AP machine support to me. Haavard is moving on to new challenges, and we've found it better to transfer the maintainer part to me. I will have good contact with Haavard anyway. Signed-off-by:
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by:
Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by:
-
Dmitry Torokhov authored
In an effort to minimize customer confusion we want to unify naming convention for VMware-provided kernel modules. This change renames the balloon driver from vmware_ballon to vmw_balloon. We expect to follow this naming convention (vmw_<module_name>) for all modules that are part of mainline kernel and/or being distributed by VMware, with the sole exception of vmxnet3 driver (since the name of mainline driver happens to match with the name used in VMware Tools). Signed-off-by:
Dmitry Torokhov <dtor@vmware.com> Acked-by:
Bhavesh Davda <bhavesh@vmware.com> Signed-off-by:
-
FUJITA Tomonori authored
This fixes the regression caused by the commit 6fee48cd ("dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask"). ARM needs to clip the dma coherent mask for dmabounce devices. This restores the old trick. Note that strictly speaking, the DMA API doesn't allow architectures to do such but I'm not sure it's worth adding the new API to set the dma mask that allows architectures to clip it. Reported-by:
Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Arnd Bergmann authored
Commit 73296bc6 ("procfs: Use generic_file_llseek in /proc/vmcore") broke seeking on /proc/vmcore. This changes it back to use default_llseek in order to restore the original behaviour. The problem with generic_file_llseek is that it only allows seeks up to inode->i_sb->s_maxbytes, which is zero on procfs and some other virtual file systems. We should merge generic_file_llseek and default_llseek some day and clean this up in a proper way, but for 2.6.35/36, reverting vmcore is the safer solution. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Reported-by:
CAI Qian <caiqian@redhat.com> Tested-by:
-
Yinghai Lu authored
After d9e1b6c4 ("ipmi: fix ACPI detection with regspacing") we get [ 11.026326] ipmi_si: probing via ACPI [ 11.030019] ipmi_si 00:09: (null) regsize 1 spacing 1 irq 0 [ 11.035594] ipmi_si: Adding ACPI-specified kcs state machine on an old system with only one range for ipmi kcs range. Try to fix it by adding another res pointer. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
David Rientjes authored
A task's badness score is roughly a proportion of its rss and swap compared to the system's capacity. The scale ranges from 0 to 1000 with the highest score chosen for kill. Thus, this scale operates on a resolution of 0.1% of RAM + swap. Admin tasks are also given a 3% bonus, so the badness score of an admin task using 3% of memory, for example, would still be 0. It's possible that an exceptionally large number of tasks will combine to exhaust all resources but never have a single task that uses more than 0.1% of RAM and swap (or 3.0% for admin tasks). This patch ensures that the badness score of any eligible task is never 0 so the machine doesn't unnecessarily panic because it cannot find a task to kill. Signed-off-by:
-
