- 30 Jul, 2009 2 commits
-
-
Eric Bénard authored
CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash, up to 128MB SDRAM and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <ebenard@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Eric Bénard authored
CPU9260 and CPU9G20 share the same PCB populated with either Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash, up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 25 Jul, 2009 1 commit
-
-
Nicolas Ferre authored
It adds DMA peripheral identifiers for hardware handshaking interface. It will be used in platform code. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 23 Jul, 2009 1 commit
-
-
Nicolas Ferre authored
Modify atmel LCD driver: atmel_lcdfb for at91sam9g10. This add a clock management equivalent to at91sam9261. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 09 Jul, 2009 1 commit
-
-
Mark Brown authored
The WM8731 driver has been updated to allow registration via normal device model methods rather than from within the ASoC driver probe so update the AT91SAM9G20-EK to make use of this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 02 Jul, 2009 3 commits
-
-
Nicolas Ferre authored
From: Hong Xu <hong.xu@atmel.com> Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board- files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Ferre authored
From: Hong Xu <hong.xu@atmel.com> AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Here is the basic header file support for this product. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Ferre authored
From: Hong Xu <hong.xu@atmel.com> Add the at91sam9g10 support to the AT91 generic clock file. It takes advantage of the management by functionalities of those PLLs and clocks. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 27 Jun, 2009 5 commits
-
-
Nicolas Ferre authored
Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Ferre authored
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embedds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. Here is the basic header file support for this product series. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Ferre authored
Add the at91sam9g45 series support to the AT91 generic clock file. This takes care of the particularities of the PMC for this series. It also takes advantage of the management by functionalities of those PLLs and clocks. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Ryan Mallon authored
Remove at91_gpiolib_request. It returns -EPERM if a request pin is not in GPIO mode, however we want to be able to gpio_request alternative function pins to reserve them, and in some cases we need to be able to use the gpiolib functions on alternative function pins. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Nicolas Ferre authored
This adds input keyboard gpio support on at91sam9rlek board. It adds button 1 and 2 (left and right click). It also adds gpio leds ds1, ds2 and ds3. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 24 Jun, 2009 27 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
This reverts commit 9e9f46c4. Quoting from the commit message: "At this point, it seems to solve more problems than it causes, so let's try using it by default. It's an easy revert if it ends up causing trouble." And guess what? The _CRS code causes trouble. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: da9030_battery: Fix race between event handler and monitor Add MAX17040 Fuel Gauge driver w1: ds2760_battery: add support for sleep mode feature w1: ds2760: add support for EEPROM read and write ds2760_battery: cleanups in ds2760_battery_probe()
-
Linus Torvalds authored
Merge branches 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs-2.6,audit-current} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: another race fix in jfs_check_acl() Get "no acls for this inode" right, fix shmem breakage inline functions left without protection of ifdef (acl) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: audit: inode watches depend on CONFIG_AUDIT not CONFIG_AUDIT_SYSCALL
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Eric Paris authored
Even though one cannot make use of the audit watch code without CONFIG_AUDIT_SYSCALL the spaghetti nature of the audit code means that the audit rule filtering requires that it at least be compiled. Thus build the audit_watch code when we build auditfilter like it was before cfcad62c Clearly this is a point of potential future cleanup.. Reported-by: Frans Pop <elendil@planet.nl> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Markus Trippelsdorf authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: Fix the write access fault problem for real
-
Thomas Gleixner authored
commit 64d1304a (futex: setup writeable mapping for futex ops which modify user space data) did address only half of the problem of write access faults. The patch was made on two wrong assumptions: 1) access_ok(VERIFY_WRITE,...) would actually check write access. On x86 it does _NOT_. It's a pure address range check. 2) a RW mapped region can not go away under us. That's wrong as well. Nobody can prevent another thread to call mprotect(PROT_READ) on that region where the futex resides. If that call hits between the get_user_pages_fast() verification and the actual write access in the atomic region we are toast again. The solution is to not rely on access_ok and get_user() for any write access related fault on private and shared futexes. Instead we need to fault it in with verification of write access. There is no generic non destructive write mechanism which would fault the user page in trough a #PF, but as we already know that we will fault we can as well call get_user_pages() directly and avoid the #PF overhead. If get_user_pages() returns -EFAULT we know that we can not fix it anymore and need to bail out to user space. Remove a bunch of confusing comments on this issue as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org
-
Pekka Enberg authored
SLUB uses higher order allocations by default but falls back to small orders under memory pressure. Make sure the GFP mask used in the initial allocation doesn't include __GFP_NOFAIL. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Traditionally, we never failed small orders (even regardless of any __GFP_NOFAIL flags), and slab will allocate order-1 allocations even for small allocations that could fit in a single page (in order to avoid excessive fragmentation). Maybe we should remove this warning entirely, but before making that judgement, at least limit it to bigger allocations. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: Staging: octeon-ethernet: Fix race freeing transmit buffers. Staging: octeon-ethernet: Convert to use net_device_ops. MIPS: Cavium: Add CPU hotplugging code. MIPS: SMP: Allow suspend and hibernation if CPU hotplug is available MIPS: Add arch generic CPU hotplug DMA: txx9dmac: use dma_unmap_single if DMA_COMPL_{SRC,DEST}_UNMAP_SINGLE set MIPS: Sibyte: Fix build error if CONFIG_SERIAL_SB1250_DUART is undefined. MIPS: MIPSsim: Fix build error if MSC01E_INT_BASE is undefined. MIPS: Hibernation: Remove SMP TLB and cacheflushing code. MIPS: Build fix - include <linux/smp.h> into all smp_processor_id() users. MIPS: bug.h Build fix - include <linux/compiler.h>.
-
David Daney authored
The existing code had the following race: Thread-1 Thread-2 inc/read in_use inc/read in_use inc tx_free_list[qos].len inc tx_free_list[qos].len The actual in_use value was incremented twice, but thread-1 is going to free memory based on its stale value, and will free one too many times. The result is that memory is freed back to the kernel while its packet is still in the transmit buffer. If the memory is overwritten before it is transmitted, the hardware will put a valid checksum on it and send it out (just like it does with good packets). If by chance the TCP flags are clobbered but not the addresses or ports, the result can be a broken TCP stream. The fix is to track the number of freed packets in a single location (a Fetch-and-Add Unit register). That way it can never get out of sync with itself. We try to free up to MAX_SKB_TO_FREE (currently 10) buffers at a time. If fewer are available we adjust the free count with the difference. The action of claiming buffers to free is atomic so two threads cannot claim the same buffers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
David Daney authored
Convert the driver to use net_device_ops as it is now mandatory. Also compensate for the removal of struct sk_buff's dst field. The changes are mostly mechanical, the content of ethernet-common.c was moved to ethernet.c and ethernet-common.{c,h} are removed. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Thanks to Cavium Inc. for the code contribution and help. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
The SMP implementation of suspend and hibernate depends on CPU hotplugging. In the past we didn't have CPU hotplug so suspend and hibernation were not possible on SMP systems. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Each platform has to add support for CPU hotplugging itself by providing suitable definitions for the cpu_disable and cpu_die of the smp_ops methods and setting SYS_SUPPORTS_HOTPLUG_CPU. A platform should only set SYS_SUPPORTS_HOTPLUG_CPU once all it's smp_ops definitions have the necessary changes. This patch contains the changes to the dummy smp_ops definition for uni-processor systems. Parts of the code contributed by Cavium Inc. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
This patch does not change actual behaviour since dma_unmap_page is just an alias of dma_unmap_single on MIPS. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This fixes kernel.org bugzilla 13596, see http://bugzilla.kernel.org/show_bug.cgi?id=13596 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This fixes kernel.org bugzilla 13595, see http://bugzilla.kernel.org/show_bug.cgi?id=13595 Reported-by: dvice_null@yahoo.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
We can't perform any flushes on SMP from swsusp_arch_resume because interrupts are disabled. A cross-CPU flush is unnecessary anyway because all but the local CPU have already been disabled. A local flush is not needed either because we didn't change any mappings. So just delete the code. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
In the past this file somehow used to be dragged in. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (48 commits) dm mpath: change to be request based dm: disable interrupt when taking map_lock dm: do not set QUEUE_ORDERED_DRAIN if request based dm: enable request based option dm: prepare for request based option dm raid1: add userspace log dm: calculate queue limits during resume not load dm log: fix create_log_context to use logical_block_size of log device dm target:s introduce iterate devices fn dm table: establish queue limits by copying table limits dm table: replace struct io_restrictions with struct queue_limits dm table: validate device logical_block_size dm table: ensure targets are aligned to logical_block_size dm ioctl: support cookies for udev dm: sysfs add suspended attribute dm table: improve warning message when devices not freed before destruction dm mpath: add service time load balancer dm mpath: add queue length load balancer dm mpath: add start_io and nr_bytes to path selectors dm snapshot: use barrier when writing exception store ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwbLinus Torvalds authored
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: allow WLP to be used with IPv6. uwb: event_size should be signed
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b63' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: Fix rule eviction order for AUDIT_DIR Audit: clean up all op= output to include string quoting Audit: move audit_get_nd completely into audit_watch audit: seperate audit inode watches into a subfile Audit: clean up audit_receive_skb Audit: cleanup netlink mesg handling Audit: unify the printk of an skb when auditd not around Audit: dereferencing krule as if it were an audit_watch Audit: better estimation of execve record length Audit: fix audit watch use after free
-