- 23 Nov, 2017 7 commits
-
-
Masahiro Yamada authored
$(real-objs-y) in only used in scripts/Makefile.build to form "targets", but $(extra-y) is added to "targets" in another line. We do not need to add $(extra-y) twice. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
*.i and *.lst are supported by the single target build. Clean up them. Signed-off-by: -
Masahiro Yamada authored
The "rpm" has been kept for backward compatibility since pre-git era. I am planning to remove it after the Linux 4.18 release. Annouce the end of the support, prompting to use "rpm-pkg" instead. If you use "rpm", it will work like "rpm-pkg", but warning messages will be displayed as follows: WARNING: "rpm" target will be removed after Linux 4.18 Please use "rpm-pkg" instead. Signed-off-by: -
Masahiro Yamada authored
For rpm-pkg and deb-pkg, a source tar file is created. All paths in the archive must be prefixed with the base name of the tar so that everything is contained in the directory when you extract it. Currently, scripts/package/Makefile uses a symlink for that, and removes it after the tar is created. If you terminate the build during the tar creation, the symlink is left over. Then, at the next package build, you will see a warning like follows: ln: '.' and 'kernel-4.14.0+/.' are the same file It is possible to fix it by adding -n (--no-dereference) option to the "ln" command, but a cleaner way is to use --transform option of "tar" command. This option is GNU extension, but it should not hurt to use it in the Linux build system. The 'S' flag is needed to exclude symlinks from the path fixup. Without it, symlinks in the kernel are broken. Signed-off-by: -
Masahiro Yamada authored
The command "make -j8 C=1 CHECK=scripts/coccicheck" produces lots of "coccicheck failed" error messages. Julia Lawall explained the Coccinelle behavior as follows: "The problem on the Coccinelle side is that it uses a subdirectory with the name of the semantic patch to store standard output and standard error for the different threads. I didn't want to use a name with the pid, so that one could easily find this information while Coccinelle is running. Normally the subdirectory is cleaned up when Coccinelle completes, so there is only one of them at a time. Maybe it is best to just add the pid. There is the risk that these subdirectories will accumulate if Coccinelle crashes in a way such that they don't get cleaned up, but Coccinelle could print a warning if it detects this case, rather than failing." When scripts/coccicheck is used as CHECK tool and -j option is given to Make, the whole of build process runs in parallel. So, multiple processes try to get access to the same subdirectory. I notice spatch creates the subdirectory only when it runs in parallel (i.e. --jobs <N> is given and <N> is greater than 1). Setting NPROC=1 is a reasonable solution; spatch does not create the subdirectory. Besides, ONLINE=1 mode takes a single file input for each spatch invocation, so there is no reason to parallelize it in the first place. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr>
-
Heinrich Schuchardt authored
sym_arr is of type struct symbol **. So in malloc we need sizeof(struct symbol *). The problem was indicated by coccinelle. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
-
Chris Fries authored
Set the clang KBUILD_CFLAGS up before including arch/ Makefiles, so that ld-options (etc.) can work correctly. This fixes errors with clang such as ld-options trying to CC against your host architecture, but LD trying to link against your target architecture. Signed-off-by:
Chris Fries <cfries@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Tested-by:
-
- 18 Nov, 2017 33 commits
-
-
Masahiro Yamada authored
Now kbuild core scripts create empty built-in.o where necessary. Remove "obj- := dummy.o" tricks. Signed-off-by: -
Masahiro Yamada authored
"obj-y += foo/" syntax requires Kbuild to visit the "foo" subdirectory and link built-in.o from that directory. This means foo/Makefile is responsible for creating built-in.o even if there is no object to link (in this case, built-in.o is an empty archive). We have had several fixups like commit 4b024242 ("kbuild: Fix linking error built-in.o no such file or directory"), then ended up with a complex condition as follows: ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) builtin-target := $(obj)/built-in.o endif We still have more cases not covered by the above, so we need to add obj- := dummy.o in several places just for creating empty built-in.o. A key point is, the parent Makefile knows whether built-in.o is needed or not. If a subdirectory needs to create built-in.o, its parent can tell the fact when descending. If non-empty $(need-builtin) flag is passed from the parent, built-in.o should be created. $(obj-y) should be still checked to support the single target "%/". All of ugly tricks will go away. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org>
-
Bjørn Forsman authored
Most places use pwd and rely on $PATH lookup. Moving the remaining absolute path /bin/pwd users over for consistency. Also, a reason for doing /bin/pwd -> pwd instead of the other way around is because I believe build systems should make little assumptions on host filesystem layout. Case in point, we do this kind of patching already in NixOS. Ref. commit 028568d8 ("kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)"). Signed-off-by:
Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild misc updates from Masahiro Yamada: - Clean up and fix RPM package build - Fix a warning in DEB package build - Improve coccicheck script - Improve some semantic patches * tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: docs: dev-tools: coccinelle: delete out of date wiki reference coccinelle: orplus: reorganize to improve performance coccinelle: use exists to improve efficiency builddeb: Pass the kernel:debarch substvar to dpkg-genchanges Coccinelle: use false positive annotation coccinelle: fix verbose message about .cocci file being run coccinelle: grep Options and Requires fields more precisely Coccinelle: make DEBUG_FILE option more useful coccinelle: api: detect identical chip data arrays coccinelle: Improve setup_timer.cocci matching Coccinelle: setup_timer: improve messages from setup_timer kbuild: rpm-pkg: do not force -jN in submake kbuild: rpm-pkg: keep spec file until make mrproper kbuild: rpm-pkg: fix jobserver unavailable warning kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot} kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled kbuild: rpm-pkg: refactor mkspec with here doc kbuild: rpm-pkg: clean up mkspec kbuild: rpm-pkg: install vmlinux.bz2 unconditionally kbuild: rpm-pkg: remove ppc64 specific image handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: "One of the most remarkable improvements in this cycle is, Kbuild is now able to cache the result of shell commands. Some variables are expensive to compute, for example, $(call cc-option,...) invokes the compiler. It is not efficient to redo this computation every time, even when we are not actually building anything. Kbuild creates a hidden file ".cache.mk" that contains invoked shell commands and their results. The speed-up should be noticeable. Summary: - Fix arch build issues (hexagon, sh) - Clean up various Makefiles and scripts - Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles - Cache variables that are expensive to compute - Improve cc-ldopton and ld-option for Clang - Optimize output directory creation" * tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kbuild: move coccicheck help from scripts/Makefile.help to top Makefile sh: decompressor: add shipped files to .gitignore frv: .gitignore: ignore vmlinux.lds selinux: remove unnecessary assignment to subdir- kbuild: specify FORCE in Makefile.headersinst as .PHONY target kbuild: remove redundant mkdir from ./Kbuild kbuild: optimize object directory creation for incremental build kbuild: create object directories simpler and faster kbuild: filter-out PHONY targets from "targets" kbuild: remove redundant $(wildcard ...) for cmd_files calculation kbuild: create directory for make cache only when necessary sh: select KBUILD_DEFCONFIG depending on ARCH kbuild: fix linker feature test macros when cross compiling with Clang kbuild: shrink .cache.mk when it exceeds 1000 lines kbuild: do not call cc-option before KBUILD_CFLAGS initialization kbuild: Cache a few more calls to the compiler kbuild: Add a cache for generated variables kbuild: add forward declaration of default target to Makefile.asm-generic kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE ... -
Linus Torvalds authored
Merge more updates from Andrew Morton: - a bit more MM - procfs updates - dynamic-debug fixes - lib/ updates - checkpatch - epoll - nilfs2 - signals - rapidio - PID management cleanup and optimization - kcov updates - sysvipc updates - quite a few misc things all over the place * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) EXPERT Kconfig menu: fix broken EXPERT menu include/asm-generic/topology.h: remove unused parent_node() macro arch/tile/include/asm/topology.h: remove unused parent_node() macro arch/sparc/include/asm/topology_64.h: remove unused parent_node() macro arch/sh/include/asm/topology.h: remove unused parent_node() macro arch/ia64/include/asm/topology.h: remove unused parent_node() macro drivers/pcmcia/sa1111_badge4.c: avoid unused function warning mm: add infrastructure for get_user_pages_fast() benchmarking sysvipc: make get_maxid O(1) again sysvipc: properly name ipc_addid() limit parameter sysvipc: duplicate lock comments wrt ipc_addid() sysvipc: unteach ids->next_id for !CHECKPOINT_RESTORE initramfs: use time64_t timestamps drivers/watchdog: make use of devm_register_reboot_notifier() kernel/reboot.c: add devm_register_reboot_notifier() kcov: update documentation Makefile: support flag -fsanitizer-coverage=trace-cmp kcov: support comparison operands collection kcov: remove pointless current != NULL check kernel/panic.c: add TAINT_AUX ...
-
Randy Dunlap authored
Clean up the EXPERT menu (yet again). Move FHANDLE and CHECKPOINT_RESTORE into the primary EXPERT menu since they already depend on EXPERT. Move BPF_SYSCALL and USERFAULTFD out of the EXPERT Kconfig symbols menu list since they do not depend on EXPERT and were breaking the continuity of that menu list. Move all of the KALLSYMS Kconfig symbols to the end of the EXPERT menu. This separates the kernel services from the build options. This patch depends on [PATCH] pci: move PCI_QUIRKS to the PCI bus menu (https://lkml.org/lkml/2017/11/2/907). Link: http://lkml.kernel.org/r/72e4465a-a5ff-cb3c-1a90-11aa4861b161@infradead.orgSigned-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> [BPF] Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dou Liyang authored
Commit a7be6e5a ("mm: drop useless local parameters of __register_one_node()") removed the last user of parent_node(). The parent_node() macro in generic situation is unnecessary. Remove it for cleanup. Link: http://lkml.kernel.org/r/1504234599-29533-8-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Reported-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dou Liyang authored
Commit a7be6e5a ("mm: drop useless local parameters of __register_one_node()") removed the last user of parent_node(). The parent_node() macro in tile platform is unnecessary. Remove it for cleanup. Link: http://lkml.kernel.org/r/1504234599-29533-7-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by:
Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by:
-
Dou Liyang authored
Commit a7be6e5a ("mm: drop useless local parameters of __register_one_node()") removed the last user of parent_node(). The parent_node() macro in SPARC64 platform is unnecessary. Remove it for cleanup. Link: http://lkml.kernel.org/r/1504234599-29533-6-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dou Liyang authored
Commit a7be6e5a ("mm: drop useless local parameters of __register_one_node()") removed the last user of parent_node(). The parent_node() macro in SUPERH platform is unnecessary. Remove it for cleanup. Link: http://lkml.kernel.org/r/1504234599-29533-5-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by:
-
Dou Liyang authored
Commit a7be6e5a ("mm: drop useless local parameters of __register_one_node()") removed the last user of parent_node(). The parent_node() macro in IA64(Itanium) platform is unnecessary. Remove it for cleanup. Link: http://lkml.kernel.org/r/1504234599-29533-2-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by:
-
Arnd Bergmann authored
pcmv_setup() is only used when the badge4 driver is built-in, but not when it is a loadable module: drivers/pcmcia/sa1111_badge4.c:153:122: error: 'pcmv_setup' defined but not used [-Werror=unused-function] This adds an #ifdef to avoid the definition of the unused function in the modular case. Link: http://lkml.kernel.org/r/20170911201133.3421636-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Russell King <rmk@armlinux.org.uk> Signed-off-by:
-
Kirill A. Shutemov authored
Performance of get_user_pages_fast() is critical for some workloads, but it's tricky to test it directly. This patch provides /sys/kernel/debug/gup_benchmark that helps with testing performance of it. See tools/testing/selftests/vm/gup_benchmark.c for userspace counterpart. Link: http://lkml.kernel.org/r/20170908215603.9189-2-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Davidlohr Bueso authored
For a custom microbenchmark on a 3.30GHz Xeon SandyBridge, which calls IPC_STAT over and over, it was calculated that, on avg the cost of ipc_get_maxid() for increasing amounts of keys was: 10 keys: ~900 cycles 100 keys: ~15000 cycles 1000 keys: ~150000 cycles 10000 keys: ~2100000 cycles This is unsurprising as maxid is currently O(n). By having the max_id available in O(1) we save all those cycles for each semctl(_STAT) command, the idr_find can be expensive -- which some real (customer) workloads actually poll on. Note that this used to be the case, until commit 7ca7e564 ("ipc: store ipcs into IDRs"). The cost is the extra idr_find when doing RMIDs, but we simply go backwards, and should not take too many iterations to find the new value. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170831172049.14576-5-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Davidlohr Bueso authored
This is better understood as a limit, instead of size; exactly like the function comment indicates. Rename it. Link: http://lkml.kernel.org/r/20170831172049.14576-4-dave@stgolabs.netSigned-off-by:
-
Davidlohr Bueso authored
The comment in msgqueues when using ipc_addid() is quite useful imo. Duplicate it for shm and semaphores. Link: http://lkml.kernel.org/r/20170831172049.14576-3-dave@stgolabs.netSigned-off-by:
-
Davidlohr Bueso authored
Patch series "sysvipc: ipc-key management improvements". Here are a few improvements I spotted while eyeballing Guillaume's rhashtable implementation for ipc keys. The first and fourth patches are the interesting ones, the middle two are trivial. This patch (of 4): The next_id object-allocation functionality was introduced in commit 03f59566 ("ipc: add sysctl to specify desired next object id"). Given that these new entries are _only_ exported under the CONFIG_CHECKPOINT_RESTORE option, there is no point for the common case to even know about ->next_id. As such rewrite ipc_buildid() such that it can do away with the field as well as unnecessary branches when adding a new identifier. The end result also better differentiates both cases, so the code ends up being cleaner; albeit the small duplications regarding the default case. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170831172049.14576-2-dave@stgolabs.netSigned-off-by:
-
Arnd Bergmann authored
The cpio format uses a 32-bit number to encode file timestamps, which breaks initramfs support in 2038. This reinterprets the timestamp as unsigned, to give us another 68 years and avoids breaking until 2106. Link: http://lkml.kernel.org/r/20171019095536.801199-1-arnd@arndb.deSigned-off-by:
-
Andrey Smirnov authored
Save a bit of cleanup code by leveraging newly added devm_register_reboot_notifier(). [akpm@linux-foundation.org: small cleanup: avoid 80-col tricks] Link: http://lkml.kernel.org/r/20170411160615.9784-1-andrew.smirnov@gmail.comSigned-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by:
Guenter Roeck <linux@roeck-us.net> Cc: Chris Healy <cphealy@gmail.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Andrey Smirnov authored
Add devm_* wrapper around register_reboot_notifier to simplify device specific reboot notifier registration/unregistration. [akpm@linux-foundation.org: move `struct device' forward decl to top-of-file] Link: http://lkml.kernel.org/r/20170320171753.1705-1-andrew.smirnov@gmail.comSigned-off-by:
-
Victor Chibotaru authored
The updated documentation describes new KCOV mode for collecting comparison operands. Link: http://lkml.kernel.org/r/20171011095459.70721-3-glider@google.comSigned-off-by:
Victor Chibotaru <tchibo@google.com> Signed-off-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Popov <alex.popov@linux.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Kees Cook <keescook@chromium.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: <syzkaller@googlegroups.com> Signed-off-by:
-
Victor Chibotaru authored
The flag enables Clang instrumentation of comparison operations (currently not supported by GCC). This instrumentation is needed by the new KCOV device to collect comparison operands. Link: http://lkml.kernel.org/r/20171011095459.70721-2-glider@google.comSigned-off-by:
-
Victor Chibotaru authored
Enables kcov to collect comparison operands from instrumented code. This is done by using Clang's -fsanitize=trace-cmp instrumentation (currently not available for GCC). The comparison operands help a lot in fuzz testing. E.g. they are used in Syzkaller to cover the interiors of conditional statements with way less attempts and thus make previously unreachable code reachable. To allow separate collection of coverage and comparison operands two different work modes are implemented. Mode selection is now done via a KCOV_ENABLE ioctl call with corresponding argument value. Link: http://lkml.kernel.org/r/20171011095459.70721-1-glider@google.comSigned-off-by:
-
Andrey Ryabinin authored
__sanitizer_cov_trace_pc() is a hot code, so it's worth to remove pointless '!current' check. Current is never NULL. Link: http://lkml.kernel.org/r/20170929162221.32500-1-aryabinin@virtuozzo.comSigned-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Borislav Petkov authored
This is the gist of a patch which we've been forward-porting in our kernels for a long time now and it probably would make a good sense to have such TAINT_AUX flag upstream which can be used by each distro etc, how they see fit. This way, we won't need to forward-port a distro-only version indefinitely. Add an auxiliary taint flag to be used by distros and others. This obviates the need to forward-port whatever internal solutions people have in favor of a single flag which they can map arbitrarily to a definition of their pleasing. The "X" mnemonic could also mean eXternal, which would be taint from a distro or something else but not the upstream kernel. We will use it to mark modules for which we don't provide support. I.e., a really eXternal module. Link: http://lkml.kernel.org/r/20170911134533.dp5mtyku5bongx4c@pd.tnicSigned-off-by:
Borislav Petkov <bp@suse.de> Cc: Kees Cook <keescook@chromium.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Petr Mladek <pmladek@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Gargi Sharma authored
pidhash is no longer required as all the information can be looked up from idr tree. nr_hashed represented the number of pids that had been hashed. Since, nr_hashed and PIDNS_HASH_ADDING are no longer relevant, it has been renamed to pid_allocated and PIDNS_ADDING respectively. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-3-git-send-email-gs051095@gmail.com Link: http://lkml.kernel.org/r/1507583624-22146-3-git-send-email-gs051095@gmail.comSigned-off-by:
Gargi Sharma <gs051095@gmail.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com> [ia64] Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Gargi Sharma authored
Patch series "Replacing PID bitmap implementation with IDR API", v4. This series replaces kernel bitmap implementation of PID allocation with IDR API. These patches are written to simplify the kernel by replacing custom code with calls to generic code. The following are the stats for pid and pid_namespace object files before and after the replacement. There is a noteworthy change between the IDR and bitmap implementation. Before text data bss dec hex filename 8447 3894 64 12405 3075 kernel/pid.o After text data bss dec hex filename 3397 304 0 3701 e75 kernel/pid.o Before text data bss dec hex filename 5692 1842 192 7726 1e2e kernel/pid_namespace.o After text data bss dec hex filename 2854 216 16 3086 c0e kernel/pid_namespace.o The following are the stats for ps, pstree and calling readdir on /proc for 10,000 processes. ps: With IDR API With bitmap real 0m1.479s 0m2.319s user 0m0.070s 0m0.060s sys 0m0.289s 0m0.516s pstree: With IDR API With bitmap real 0m1.024s 0m1.794s user 0m0.348s 0m0.612s sys 0m0.184s 0m0.264s proc: With IDR API With bitmap real 0m0.059s 0m0.074s user 0m0.000s 0m0.004s sys 0m0.016s 0m0.016s This patch (of 2): Replace the current bitmap implementation for Process ID allocation. Functions that are no longer required, for example, free_pidmap(), alloc_pidmap(), etc. are removed. The rest of the functions are modified to use the IDR API. The change was made to make the PID allocation less complex by replacing custom code with calls to generic API. [gs051095@gmail.com: v6] Link: http://lkml.kernel.org/r/1507760379-21662-2-git-send-email-gs051095@gmail.com [avagin@openvz.org: restore the old behaviour of the ns_last_pid sysctl] Link: http://lkml.kernel.org/r/20171106183144.16368-1-avagin@openvz.org Link: http://lkml.kernel.org/r/1507583624-22146-2-git-send-email-gs051095@gmail.comSigned-off-by:Oleg Nesterov <oleg@redhat.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Ingo Molnar <mingo@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Ola N. Kaldestad authored
Remove unnecessary else block, remove redundant return and call to kfree in if block. Link: http://lkml.kernel.org/r/1510238435-1655-1-git-send-email-mail@okal.noSigned-off-by:
Ola N. Kaldestad <mail@okal.no> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kangmin Park authored
Link: http://lkml.kernel.org/r/CAKW4uUyCi=PnKf3epgFVz8z=1tMtHSOHNm+fdNxrNw3-THvRCA@mail.gmail.comSigned-off-by:
Kangmin Park <l4stpr0gr4m@gmail.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: Alan Cox <alan@redhat.com> Signed-off-by:
-
Christophe JAILLET authored
In case of error, 'dma_map_sg()' returns 0, not a negative value. There is BUG_ON() in 'dma_map_sg_attrs()' which makes sure of that. Link: http://lkml.kernel.org/r/d4235bd2b9274e99f6c86ea71b1fa1c7bd8d0c08.1505687047.git.christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Christian K_nig <christian.koenig@amd.com> Signed-off-by:
-
Christophe JAILLET authored
drivers/rapidio/devices/rio_mport_cdev.c: fix resource leak in error handling path in 'rio_dma_transfer()' If 'dma_map_sg()', we should branch to the existing error handling path to free some resources before returning. Link: http://lkml.kernel.org/r/61292a4f369229eee03394247385e955027283f8.1505687047.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Arvind Yadav authored
rio_device_id are not supposed to change at runtime. rio driver is working with const 'id_table'. So mark the non-const rio_device_id structs as const. Link: http://lkml.kernel.org/r/1503734627-6058-2-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-3-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-4-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-5-git-send-email-arvind.yadav.cs@gmail.com Link: http://lkml.kernel.org/r/1503734627-6058-6-git-send-email-arvind.yadav.cs@gmail.comSigned-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by:
Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by:
-
