- 12 Apr, 2017 15 commits
-
-
Chris Wilson authored
igt_mmap_offset_exhaustion() selftest was using live requests to make an object busy, but we did not hold a runtime pm wakeref for submitting the requests. Acquire it to avoid triggering "RPM wakelock ref not held during HW access" warnings. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170411234427.14841-3-chris@chris-wilson.co.ukReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
If we have a mock engine and it has no more requests in flight, report it as idle as there is no hardware to contradict us! Otherwise we attempt to query the hw that doesn't exist and find that the hw hasn't set its idle bit and we get upset. Signed-off-by:
-
Chris Wilson authored
Provide dummy function pointers for the mock device in case we do hit mmio during testing. v2: Use ASSIGN_READ/WRITE_MMIO_FUNCS macros Signed-off-by:
-
Chris Wilson authored
When discussing a new WC mmap, we based the interface upon the assumption that GTT was fully coherent. How naive! Commits 3b5724d7 ("drm/i915: Wait for writes through the GTT to land before reading back") and ed4596ea ("drm/i915/guc: WA to address the Ringbuffer coherency issue") demonstrate that writes through the GTT are indeed delayed and may be overtaken by direct WC access. To be safe, if userspace is mixing WC mmaps with other potential GTT access (pwrite, GTT mmaps) it should use set_domain(WC). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96563 Testcase: igt/gem_pwrite/small-gtt* Testcase: igt/drv_selftest/coherency Signed-off-by:
-
Chris Wilson authored
In the next patch, we will introduce a new cache domain for differentiating between GTT access and direct WC access. This will require us to include WC in our write_domain flushes. Rather than duplicate a third function, combine the existing two into one and flushing WC writes will then be automatically handled as well. v2: Be smarter and clearer by passing in the write domains to flush (Joonas) v3: One missed ~ in v2 conversion Signed-off-by:
-
Maarten Lankhorst authored
There is no need to acquire all locks here, doing a commit after forcing a modeset on the affected crtc is enough. Any other locks needed will be acquired as needed. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491312297-18673-1-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Maarten Lankhorst authored
This reverts commit ea49c9ac. mode_config.mutex was originally added to fix WARNs in connector functions, but now that atomic nonblocking modeset support is included, we will likely never hold any any lock at all. The WARN mentioned in commit bbf35e9d ("drm/i915: Pass atomic state to intel_audio_codec_enable, v2."), so it's safe to revert this now. Signed-off-by:
-
Maarten Lankhorst authored
No properties are supported, so just use the helper and reject everything. Signed-off-by:
-
Maarten Lankhorst authored
No properties are supported, so just use the helper and reject everything. Signed-off-by:
-
Maarten Lankhorst authored
MST doesn't support setting any properties, but it should still use the atomic helper for setting properties. Only path and tile properties are supported (read-only). Those are immutable, and handled by drm core. Signed-off-by:
-
Maarten Lankhorst authored
Those properties are not hooked up on MST and were ignored. Best not expose them at all. Without this the next patch fails to start on X.org, because the DP-MST properties could not be read. Signed-off-by:
-
Maarten Lankhorst authored
intel_tv has properties that are handled in the atomic core, but needs a modeset to update the properties inside the connector. The detect(), get_mode() and mode_valid() probe callbacks also depend on the connector state, which made this a good connector to convert first. It helped find all the issues when converting connectors to atomic. Because of these requirements, connector atomic_check() was added and connection_mutex is held during probing. The diffstat looks more favorable now. :) Changes since v1: - Add intel_encoder->swap_state to allow updating connector state. - Add intel_tv->format for detect_mode and mode_valid, updated on atomic commit. Changes since v2: - Fix typo in tv_choose_preferred modes function name. - Assignment of tv properties is done in core, so intel_tv only needs a atomic_check function. Thanks Ville! Changes since v3: - connection_mutex is now held in mode_valid() and get_modes(), this removes the need for caching parts of the connector_state. Changes since v4: - Use the new atomic connector check function. Signed-off-by:
-
Maarten Lankhorst authored
They have been unused since 2010, after the code for intel_tv_save/restore was removed in the below commit: commit 6443170f Author: Eric Anholt <eric@anholt.net> Date: Fri Apr 2 15:24:27 2010 -0700 drm/i915: Remove dead KMS encoder save/restore code. This was brought over from UMS, and used for a while until we decided that drm_helper_resume_force_mode was easier and more reliable, since it didn't require duplicating all the code deleted here. We just forgot to delete all that junk for a while. Reviewed-by:
-
Chris Wilson authored
We indirectly hold the runtime-pm for the intel_lrc_irq_handler() by virtue of dev_priv->gt.awake keeping a wakeref whilst the requests are busy. As this is not obvious from the code, add a comment. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Daniel Vetter authored
Maarten needs both the new connector->atomic_check hook and the connection_mutex locking changes in the probe helpers to be able to start merging the connector property conversion to atomic. Signed-off-by:
-
- 11 Apr, 2017 22 commits
-
-
Chris Wilson authored
Similar to commit 8490ae20 ("drm/i915: Suppress busy status for engines if wedged") we also want to report intel_engine_is_idle() as true as well as the main intel_engines_are_idle(), as we now check that the engines are idle when overwriting the HWS page. This is not true whilst we are setting the device as wedged, at least according to our bookkeeping, so we have to lie to ourselves! [ 383.588601] [drm:i915_reset [i915]] *ERROR* Failed to reset chip: -110 [ 383.588685] ------------[ cut here ]------------ [ 383.588755] WARNING: CPU: 0 PID: 12 at drivers/gpu/drm/i915/intel_engine_cs.c:226 intel_engine_init_global_seqno+0x222/0x290 [i915] [ 383.588757] WARN_ON(!intel_engine_is_idle(engine)) [ 383.588759] Modules linked in: ctr ccm snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core arc4 iwldvm mac80211 snd_pcm snd_hwdep snd_seq_midi snd_seq_midi_event rfcomm bnep snd_rawmidi intel_powerclamp coretemp dm_multipath iwlwifi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel btusb aesni_intel btrtl btbcm aes_x86_64 crypto_simd cryptd btintel snd_timer glue_helper bluetooth intel_ips snd_seq_device cfg80211 snd soundcore binfmt_misc mei_me mei dm_mirror dm_region_hash dm_log i915 intel_gtt i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea prime_numbers ahci libahci drm e1000e [ 383.588851] CPU: 0 PID: 12 Comm: migration/0 Not tainted 4.11.0-rc5+ #207 [ 383.588853] Hardware name: LENOVO 514328U/514328U, BIOS 6QET44WW (1.14 ) 04/20/2010 [ 383.588855] Call Trace: [ 383.588866] dump_stack+0x63/0x90 [ 383.588871] __warn+0xc7/0xf0 [ 383.588876] warn_slowpath_fmt+0x4a/0x50 [ 383.588883] ? set_next_entity+0x821/0x910 [ 383.588943] intel_engine_init_global_seqno+0x222/0x290 [i915] [ 383.588998] __i915_gem_set_wedged_BKL+0xa4/0x190 [i915] [ 383.589003] ? __switch_to+0x215/0x390 [ 383.589008] multi_cpu_stop+0xbb/0xe0 [ 383.589012] ? cpu_stop_queue_work+0x90/0x90 [ 383.589016] cpu_stopper_thread+0x82/0x110 [ 383.589021] smpboot_thread_fn+0x137/0x190 [ 383.589026] kthread+0xf7/0x130 [ 383.589030] ? sort_range+0x20/0x20 [ 383.589034] ? kthread_park+0x90/0x90 [ 383.589040] ret_from_fork+0x2c/0x40 Fixes: 2ca9faa5 ("drm/i915: Assert the engine is idle before overwiting the HWS") Signed-off-by:
-
Daniele Ceraolo Spurio authored
Technically speaking, the context size is per engine class, not per instance. v2: Add MISSING_CASE (Tvrtko) v3: Rebased v4: Restore the interface back to hiding the class lookup (Chris) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Oscar Mateo <oscar.mateo@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491905472-16189-1-git-send-email-oscar.mateo@intel.comReviewed-by:
-
Chris Wilson authored
In places, we assume that RCS exists. This has been true forever, but let us catch this failure during bringup by adding an explicit check that we do have an RCS engine. v2: Make use of HAS_ENGINE (Tvrtko) Signed-off-by:
-
Jani Nikula authored
Don't clobber intel_dp->sink_count with the raw value. Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/37d3222115172922fcd5ab038238359935bd561f.1491485983.git.jani.nikula@intel.com
-
Jani Nikula authored
This is what we have the readb and writeb variants for. Do some minor return value and variable cleanup while at it. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
Localize link_rate_index to the if block, and rename to just index to reduce indent. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
The source might not support as many lanes as the sink, or the link training might have failed at higher lane counts. Take these into account. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
These are the theoretical maximums common for source and sink. These are the maximums we should start with. They may be degraded in case of link training failures, and the dynamic link values are stored separately. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
If we modify these on the fly depending on the link conditions, don't pretend they are sink properties. Some link vs. sink confusion still remains, but we'll take care of them in follow-up patches. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
In link training fallback, we're trying to find a rate that we know is in a sorted array of common link rates. We don't need to limit the array using the max rate. For test request, the DP CTS doesn't say we should limit the rate based on earlier fallback. This lets us get rid of intel_dp_link_rate_index() and use intel_dp_rate_index() instead. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Now that source rates are static and sink rates are updated whenever DPCD is updated, we can do and cache the intersection of them whenever sink rates are updated. This reduces code complexity, as we don't have to keep calling the functions to intersect. We also get rid of several common rates arrays on stack. Limiting the common rates by a max link rate can be done by picking the first N elements of the cached common rates. v2: get rid of the local common_rates variable (Manasi) v3: don't clobber cached eDP rates on short pulse (Ville) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Looking at DPCD DP_MAX_LINK_RATE may be completely bogus for eDP 1.4 which is allowed to use link rate select method and have 0 in max link rate. With this change, it makes sense to store the max rate as the actual rate rather than as a bw code. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Chris Wilson authored
We want to refer to the index of the engine consistently throughout the userspace ABI. We already have such an index through the execbuffer engine specifier, that needs to be able to refer to each engine specifically, so rename it the index to uabi_id to reflect its generality beyond execbuf. Signed-off-by:
-
Oscar Mateo authored
There are some properties that logically belong to the engine class, and some that belong to the engine instance. Make it explicit. v2: Commit message (Tvrtko) v3: - Rebased - Exec/uabi id should be per instance (Chris) v4: - Rebased - Avoid re-ordering fields for smaller diff (Tvrtko) - Bug on oob access to the class array (Michal) v5: Bug on the right thing (Michal) v6: Rebased Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Oscar Mateo authored
Not really needed, but makes the next change a little bit more compact. v2: - Use zero-based numbering for engine names: xcs0, xcs1.. xcsN (Tvrtko, Chris) - Make sure the mock engine name is null-terminated (Tvrtko, Chris) v3: Because I'm stupid (Chris) v4: Verify engine name wasn't truncated (Michal) v5: - Kill the warning in mock engine (Chris) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by:
-
Oscar Mateo authored
If we needed to do something different for the init functions, we could always look at the engine instance to make the distinction. But, in any case, the two functions are virtually identical already (please notice that BSD2_RING is only used from gen8 onwards). With this, the init functions depends excusively on the engine class (a fact that we will use soon). v2: Commit message Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
In such a way that vcs and vcs2 are just two different instances (0 and 1) of the same engine class (VIDEO_DECODE_CLASS). v2: Align the instance types (Tvrtko) v3: Don't use enums for bspec-defined stuff (Michal) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
While we do hold the forcewake for legacy ringbuffer initialisation, we don't guard our access with the uncore.lock spinlock. In theory, we only initialise when no others should be accessing the same mmio cachelines, but in practice be safe as this is an infrequently used path and not worth risky micro-optimisations. Signed-off-by:
-
Chris Wilson authored
Since the sandybridge_pcode_read() may be called from skl_pcode_request() inside an atomic context (with preempt disabled), we should avoid hitting any sleeping paths. Currently is being called with a 500ms timeout, irrespective of being inside an atomic context or not. This is reduced down to 500us to play nice with the atomic context, and that appears to be sufficient to keep BAT happy (we have a DRM_ERROR should it timeout), i.e. we do not see any 500us pcode timeouts for normal use. So leave it as a pure spin without having to introduce new code paths to separate atomic/normal contexts. Signed-off-by:
-
Chris Wilson authored
We acquire the forcewake and use I915_READ_FW instead for the atomic wait within intel_uncore_wait_for_register. However, this still leaves us vulnerable to concurrent mmio access to the register, which can cause system hangs on gen7. The protection is to acquire uncore.lock around each register, so lets add it back. v2: Wrap __intel_wait_for_register_fw() to re-use its atomic wait_for loop and spare adding another for ourselves. v3: Add might_sleep() annotation Signed-off-by:
-
Chris Wilson authored
submit_request() is called from an atomic context, it's not allowed to sleep. We have to be careful in our parameters to intel_uncore_wait_for_register() to limit ourselves to the atomic wait loop and not incur the wrath of our warnings. Fixes: 6976e74b ("drm/i915: Don't allow overuse of __intel_wait_for_register_fw()") Signed-off-by:
-
Chris Wilson authored
Allow the caller to use the fast_timeout_us to specify how long to wait within the atomic section, rather than transparently switching to a sleeping loop for larger values. This is required as some callsites may need a long wait and are in an atomic section. v2: Reinforce kerneldoc fast_timeout_us limit with a GEM_BUG_ON Signed-off-by:
-
- 10 Apr, 2017 3 commits
-
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
Noteworthy changes this time: 1) 4k support for newer chips (ganging up hwpipes and mixers) 2) using OPP bindings for gpu 3) more prep work towards per-process pagetables * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (47 commits) msm/drm: gpu: Dynamically locate the clocks from the device tree drm/msm: gpu: Use OPP tables if we can drm/msm: Hard code the GPU "slow frequency" drm/msm: Add MSM_PARAM_GMEM_BASE drm/msm: Reference count address spaces drm/msm: Make sure to detach the MMU during GPU cleanup drm/msm/mdp5: Enable 3D mux in mdp5_ctl drm/msm/mdp5: Reset CTL blend registers before configuring them drm/msm/mdp5: Assign 'right' mixer to CRTC state drm/msm/mdp5: Stage border out on base stage if CRTC has 2 LMs drm/msm/mdp5: Stage right side hwpipes on Right-side Layer Mixer drm/msm/mdp5: Prepare Layer Mixers for source split drm/msm/mdp5: Configure 'right' hwpipe drm/msm/mdp5: Assign a 'right hwpipe' to plane state drm/msm/mdp5: Create mdp5_hwpipe_mode_set drm/msm/mdp5: Add optional 'right' Layer Mixer in CRTC state drm/msm/mdp5: Add a CAP for Source Split drm/msm/mdp5: Remove mixer/intf pointers from mdp5_ctl drm/msm/mdp5: Start using parameters from CRTC state drm/msm/mdp5: Add more stuff to CRTC state ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Last drm-misc-next pull req for 4.12 Core changes: - fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry) - drm_ioctl and drm_sysfs improved/gained documentation (Daniel) - [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander) - Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff (Daniel) - Add connector_atomic_check to check conn constraints on modeset (Maarten) - Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob) Driver changes: - meson moved to drm-misc (Neil) - Added support for Amlogic GX SoCs in dw-hdmi (Neil) - Rockchip unbind actually cleans up the things bind initializes (Jeffy) - A couple misc fixes in virtio, dw-hdmi NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx as well as the new synopsys media formats) * tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits) Revert "drm: Don't allow interruptions when opening debugfs/crc" drm: Only take cursor locks when the cursor plane exists drm/vmwgfx: Fix fbdev emulation using legacy functions drm/rockchip: Shutdown all crtcs when unbinding drm drm/rockchip: Reorder drm bind/unbind sequence drm/rockchip: analogix_dp: Disable clock when unbinding drm/rockchip: vop: Unprepare clocks when unbinding drm/rockchip: vop: Enable pm domain before vop_initial drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding drm/rockchip: cdn-dp: Don't try to release firmware when not loaded drm: bridge: analogix: Destroy connector & encoder when unbinding drm: bridge: analogix: Disable clock when unbinding drm: bridge: analogix: Unregister dp aux when unbinding drm: bridge: analogix: Detach panel when unbinding analogix dp drm: Don't allow interruptions when opening debugfs/crc drm/virtio: don't leak bo on drm_gem_object_init failure drm: bridge: dw-hdmi: fix input format/encoding from plat_data drm: omap: use common OF graph helpers drm: convert drivers to use drm_of_find_panel_or_bridge drm: convert drivers to use of_graph_get_remote_node ... -
Dave Airlie authored
Linux 4.11-rc6 drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
-
